Used Triag Clamping Cube for sale (9,488)

Condition: good (used), Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine -Ideal for centering shafts -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm Gbsdpjb Uhn Njfx Afuju -Prism length: 2900 mm -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg

Condition: used, T-slot plate, clamping plate with T-slots, plate field, welding table, welding table, intermediate plate for hydraulic press, eccentric press, milling machine -Dimensions: 930/700/H90 mm -Plate: massive -Bore in the middle: Ø 100 mm Gjdpfx Afjb Uhqieuebu -Weight: 450 kg

Condition: used, functionality: fully functional, 4 pieces of Matsuura H-Plus 630 machine pallets, 800 x 800 mm, with hydraulic feed Gbedpfexn R Skjx Afueu

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used steel clamping table Gbedpfx Aeuzaafefuju 4200 x 1500 x 350 mm Weight approx. 5000 kg

Condition: new, Year of construction: 2026, Diameter of bolts in the set – 12 mm. Used for milling, iron working, mechanical and drilling processes. In the set: Gbjdpfx Afovxta Neueu Extension nuts – 4 pieces Flanged nuts – 6 pieces T-slot nuts – 6 pieces Stepped support – Support block, stepped (3 types, 4 pieces each) – 12 pieces Stepped clamp (3 types, 2 pieces each) – 6 pieces 3', 4', 5', 6', 7', 8' stud bolts - 4 pieces each Manufacturer: Cormak

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Material: Cast iron Gjdpfx Ajzk D T Hjfuobu -Dimensions: see photos / technical drawing -Number: 4x mounting cubes available - Price: per piece -Dimensions: 600/400/H400 mm -Weight: 165 kg/unit

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Gbedpfx Afsxy Stysuou Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Gsdpfx Ajznn Hlefuobu Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: used, Year of construction: 1963, machine/vehicle number: 418, 1-Zangen Klebebinder - 1-Clamp Perfect Binder W. Gantenbein BAFC 33Year 1963 - Serial-No. 0418 1 Clamp hotmelt binder Block back roughing with suction Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Gjdeh Aw T Aspfx Afuebu On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1996, 4 Zangen Klebebinder - 4-Clamp Perfect Binder Horizon BQ 440Year 1996 - Serial-No. Buchrückenbeleimung / Spine Gluing Hotmelt Seitenbeleimung / Sight Gluing Hotmelt Fräswerk mit Absaugung / milling section with extraction Frästiefe einstellbar / milling depth adjustable Automatic scoring and automatic feeding of the coversTechnische Daten / Technical Details: Papierformat / Sheet Size min. 75 x 75mm - 320 x 320mm Umschlagstärke / Cover thickness: 80 - 300 gsm Buchstärke / book thickness min. 1 - 40 mms (10 up to 400 pages) Paper thickness: 52 - 157gsm Leistung / speed max. 150 - 1.100 Cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Gbsdpfxel Dqdzj Afuju On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 870 mm Gbsdpfjxpfimox Afueu -Plate thickness: 120 mm -Vice: clamping jaws: 100 x 30 mm clamping width 160 mm -Transport dimensions: 2280/1000/H1020 mm -Weight: 1500 kg

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1515 mm -Plate thickness: 130 mm -Adjustable feet: Ø 300 x 670 mm Gbodpfxexnv Ike Afuju -Transport dimensions: 2000/1515/H430 mm -Weight: 3150 kg

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, alignment support Gjdpfx Afey Iv Rhsujbu -Square profile: clamping base, support profile, alignment base -Length: 503 mm -Number: 2x profile available -Price: per piece -Dimensions: 503/97/80 mm -Weight: 27.5 kg/pc.

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, square block -Square block: with through holes -Bore: Ø 78 mm -Number: 4x profile available Gbedpfxjy Iw Sao Afueu -Price: per piece -Dimensions: 300/200/80 mm -Weight: 27.9 kg/pc.

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500x390 mm, height 630 mm -Wall thickness: 65 mm -T slots: slot width 22 mm -Dimensions: see photos / technical drawing -Dimensions: 500/390/H630 mm Gbsdpexugvlsfx Afueu -Weight: 171 kg

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: Angle adjustable 90° -Groove width: 28 mm -Groove spacing: 150 mm -Dimensions: see photos / technical drawing Gbodpfxoxun Ats Afuju -Dimensions: 1000/800/H630 mm -Weight: 871 kg

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helm, clamp sleeve suspension clamp rail holder galvanized Gedjv R Tqfopfx Afusbu -Type: 1505 -Dimensions: see photos -Quantity: 10x clamp sleeve available -Price: per piece -Dimensions: 90/115/H140 mm -Weight: 1.8 kg/piece

Condition: good (used), Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks -Manufacturer: Röhm Gamet, pneumatic clamping cylinder for power chucks -Mounting: Thread M60 Gbodpfx Aev Twkzjfueu -Bolt circle: Ø 88 mm / M8 -Dimensions: see photos -Dimensions: 267/185/H235 mm -Weight: 18.2 kg

Condition: refurbished (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 002332192500000472, overall weight: 211 kg, total length: 1,320 mm, total width: 850 mm, total height: 1,720 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 63 m³/h, pressure (max.): 10 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Following transport damage, completely refurbished with a new screw unit! Coaxial screw compressor with maintenance-free drive and maximum energy efficiency across all pressure ranges. The low compressor speed and the reduced load on the bearings of the patented direct drive enable very long service lives. Electronic EasyTRONIC Micro II control for reliability and efficiency. Prevents motor overload, reduces wear, and extends service life. Monitors operating hours, temperature, and motor overload. Controls the direction of rotation of the motor via a phase sequence relay, thereby preventing potential damage during commissioning or after relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously sized heat exchangers result in a longer service life and reduced fluctuations in oil temperature. User-friendly in every detail. Gbjdpfszrnc Iox Afueu Low noise, suitable for installation in any working environment. Small external dimensions, making transport and installation easy. Service-friendly due to optimal accessibility and easy disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Standard with star-delta circuit. Ready for connection with all fittings. Integrated desiccant dryer. Higher reliability of the compressed air system without costly downtime and production delays, while simultaneously ensuring product quality. Ready for use without any installation effort.

Condition: used, Year of construction: 1999, functionality: fully functional, empty load weight: 1,085 kg, load capacity: 2,900 kg, opening width: 2,100 mm, Rotating fork clamp Load center: 340 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: very good Gsdpfx Aoy T Szmofusbu Description: Kaup attachment, rotating fork clamp 4T453, year of manufacture: 1999, load capacity: 2900 kg at 500 mm, fully functional! Max. opening width: 2100 mm, width of clamp arms: 570 mm, height of clamp arms: 830 mm.

Condition: used, weight / kg Gbjdpfxozmy Swj Afusu taper MK /

Condition: used, M40 x 1 Gbedpfszrxp Ejx Afusu Right-hand thread

Condition: used, d1 = 35 mm d2 = 27 mm (spanner width) Godpfx Aszrxqpefuobu Technical data: - Overall length: 195 mm

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 850 kg, empty load weight: 610 kg, opening width: 2,400 mm, Bale clamp Condition: Ready for use and fully functional Gsdpfxjuhwz Re Afuebu Technical condition: good Description: Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Errors and prior sale reserved, sale only to traders... every sale of used goods takes place under exclusion of warranty and or guarantee.

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Key Advantages Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Gedevxtcqepfx Afusbu Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Construction and Technology The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Applications The two-section hold-down for sliding table saws is suitable for: furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar