Used Untha Shredders Untha Lr 630 2003 for sale (4,425)

Condition: good (used), RAFFIN gooseneck press 70 Tons Hsdpfx Ajxb D Hhsqgefn Capacity 600mmx300 Good overall condition Machine dismantled, loading onto truck. Contact by phone in French, by email in your language.

Condition: excellent (used), Year of construction: 2006, Guilliet LKT 630 thicknesser Hjdpfx Asncbh Uoqgsfn Working width 630mm Working height 300mm Shaft with 4 knives Shaft with conventional knives Shaft diameter 120mm Programmer for height setting Two feed speeds 8-16m/min Total power 8.5kw CE certificate Year of production 2006 Weight 950kg

Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Hedpfx Ajdv Eu Hjqgsfn Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: used, Year of construction: 2025, operating hours: 650 h, functionality: fully functional, overall weight: 27,000 kg, total length: 10,030 mm, total height: 3,675 mm, total width: 2,540 mm, rotor length: 3,000 mm, power: 405 kW (550.65 HP), ejection height: 4,030 mm, For sale is a PRONAR MRW 1.300 single-shaft pre-shredder (mobile slow-speed shredder) in very good condition. Similar design to the legendary DW-3060 "Buffalo". We are very satisfied with the machine, which is in top condition and has only a few operating hours. The reason for the sale is solely that the input material for the company has changed, and therefore a change to a different (chipping) shredding technology is necessary. The machine is regularly used and can be inspected upon request! Diesel engine Volvo Penta 405kW/550 hp, Stage 5 Rotor with 42 bolted tools; length 3000 mm 3-axle chassis with 27 tons; approved for up to 80 km/h 2 screening baskets Overband magnet Long discharge conveyor; discharge height 4030 mm Central lubrication Radio remote control Hopper volume 6.4 m³ / hopper dimensions 3650x2200 / hopper discharge height 2870 mm Hfedpfjzrd Tisx Aqgjn Direct sale by Hannes Schirnhofer - Schirnhofer wood chip production - Flattendorf, Styria

Condition: used, axle configuration: 3 axles, first registration: 07/2003, color: other, Year of construction: 2003, Empty weight: 7.410 kg Hfsdpjzukbrjfx Aqgsn Axle 1: left 4mm right4 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm

Condition: used, Hazemag Universa 2030 rotor shredder with fixed shredding knives, designed for coarse shredding of wood and other materials. The machine is equipped with a hydraulically adjustable grate system for controlling the output material size. Technical specifications: Hfodszpxfuepfx Aqgen Manufacturer: Hazemag Model: Universa 2030 Rotor length: 3000 mm Rotor diameter: 2000 mm Rotor weight: approx. 25 t Rotor speed: 480 rpm Drive motor: 500 kW Electric motor and starter included Hydraulically adjustable grate system Output size adjustable from 100 to 400 mm (10–40 cm) Total machine weight: approx. 100 t Approximately 1,000 operating hours

Condition: used, Year of construction: 2018, operating hours: 7,293 h, total height: 9,500 mm, total length: 34,500 mm, total width: 14,550 mm, Production year: 2018 Model: 10HM Drake Number of operating hours: 7293 h Minimum space requirements: 34500mm x 14550mm x 9500mm Electric motor power (Siemens): 550 kW Working shaft width: 1000 mm Configuration: 10 hammers, 3-2-3-2 arrangement (weight per hammer: 105-117 kg) Capacity: 14 tons/hour Magnetic separator (steel) – 2 units Eddy current separator (non-ferrous metals) Drum screen Spare parts: Flap, 3 sets of hammers, pins, conveyor belts, sensors, 6 screens, gearboxes Hfsdpfx Ajzmul Eeqgsn If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Catalog number: 6825 TECHNICAL DATA - Dimensions of the loading hopper (length/width): 900x630mm - Working width of the rotor: 540mm - Motor: 7.5kW - Screen diameter: 20mm - Blade dimensions: 40x40mm - Number of blades: 15 pcs - Auto-reverse function - Presser drawer - Dimensions (length/width/height): 2060x980x1580mm - Weight: 1008kg ADVANTAGES - German-made - Unpainted - Very good condition - Used shredder Hfjdpfx Aqoztat Iogon Net price: 31,900 PLN Net price: 7,400 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (The price may change if the exchange rate fluctuates significantly)

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, filter area: 18 m², pressure: 10 bar, cake thickness: 25 mm, overall weight: 2,000 kg, number of chambers: 28, Used, refurbished Häcker chamber filter press, Type KFP 630/28. Plate format 630 x 630 mm, volume 220 liters, filtration area 18 m². 28 filter plates, cake thickness 25 mm, maximum pressure 10 bar, with black PP filter cloths. Equipped with mounted Häcker piston pump (flow rate 2.5 m³/h), with compressed air tank, mini-compressor. With electrical cabinet. Filter press installed in a 20'' dry container with an opening underneath (drawing available). Approximate dimensions: 3200 x 1000 x 1500 mm, weight 2000 kg. Hedsz Dgbwopfx Aqgsfn With technical documentation.

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 800 mm, filling opening length: 1,000 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm Infeed opening 1000 x 800 mm LW V-rotor system Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Hfodpfxjznnf Ue Aqgsn Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 1990, operating hours: 4,456 h, Wood shredder Manufacturer: Weima Type: WL 6 Year of manufacture: 1990 Hopper opening: 800 x 1,000 mm Power: 18.5 kW Screen diameter: 15 mm Hedpfoz A Ed Iex Aqgofn Rotor diameter: 368 mm Weight: approx. 1,500 kg

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 500 kN Locking force: 500 kN Distance between tie bars: 370 x 370 mm Max. opening stroke: 400 mm Min. mould height: 210 mm (160 / 135 mm with ZE 214) Max. distance between platens: 610 mm (660 / 710 mm with WA 211) Platen size (H x V): 540 x 530 mm Max. mould weight: 580 kg Max. mould weight on moving platen: 380 kg HYDRAULIC EJECTOR Ejector stroke: 125 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (200) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 1900 bar Stroke volume: 106.0 cm³ Shot weight (PS): 94 g Max. dosing stroke: 150 mm Barrel heating power: 8.3 kW Hopper capacity: 20 l INJECTION UNIT – HORIZONTAL Max. nozzle stroke: 361 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN INJECTION UNIT – VERTICAL (parting line injection) A min / A max: 100 / 300 mm B min / B max: 100 / 468.5 mm Max. nozzle stroke: 368.5 mm Nozzle contact force: 15 kN GENERAL Oil tank capacity: 180 l Pump motor: 18.5 kW Total installed power: 26.8 kW Dry cycle time (EUROMAP 6a): 1.80 s – 224 mm / 1.80 s – 259 mm Net weight (without oil): 3400 kg Hfsdpfx Aqjz D U Ixjgjn Dimensions horizontal (L x W x H): 3.9 x 1.2 x 2.0 m Dimensions vertical (L x W x H): 3.9 x 1.2 x 3.4 m Noise level (idle / full load): 56 / 71 dB(A)

Condition: good (used), Shredding machine Rotor approx. 250 mm Hfjdoz Ea Tpspfx Aqgsn Hydraulic slide Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW Functionality tested Technical data available upon request.

Condition: refurbished (used), Year of construction: 2005, operating hours: 6,159 h, Doppstadt DW 2560 Buffalo - Year of construction 2005 Hodpfx Aez Dcb Hjqgjfn - Operating hours 6149 - Engine Mercedes Benz 354PS - Roller : 17 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: used, functionality: fully functional, machine/vehicle number: 500-8866, overall weight: 15,000 kg, total length: 3,600 mm, total width: 3,020 mm, total height: 2,470 mm, input voltage: 400 V, number of blades: 63, rotational speed (max.): 68 rpm, rotor diameter: 600 mm, rotor length: 1,500 mm, rotor width: 1,500 mm, type of input current: three-phase, WEIMA single-shaft slow-speed shredder – industrial, 1500 mm rotor, 1500 × 1835 mm opening For sale: used, single-shaft slow-speed shredder from the renowned WEIMA brand, designed for shredding a wide range of industrial waste – including hard plastics, film, big bags, wooden components, and furniture panels. Hjdpfx Asz D Sz Neqgjfn This industrial-class machine, with its large rotor and wide inlet, guarantees high performance and the ability to process large-sized materials. 🔧 Technical specifications: Number of rotor knives: 63 Feed opening: 1500 × 1835 mm Rotor: length 1500 mm, diameter 600 mm, rotational speed 68 rpm Rotor type: reinforced V-rotor, screw-in knife holders Pressing system: pendulum type Hydraulic and electrical system: in working order 📦 Additional equipment: New, unused screens: 2 pieces (thickness 10 mm, size 708 × 1225 mm, mesh size Ø 40 mm) Set of mounting blocks + lower mounting strip for screens ⚠️ Condition: Used machine Rotor and knives need to be replaced or refurbished All other components are in working order

Condition: excellent (used), Year of construction: 2013, operating hours: 6,330 h, functionality: fully functional, total length: 8,600 mm, total width: 2,600 mm, overall weight: 38,000 kg, hopper volume: 8 l, rotor diameter: 850 mm, rotational speed (max.): 24 rpm, year of last overhaul: 2013, We offer this very good HAMMEL VB 850 DK two shaft shredder, year of construction 2013. Hfsdpfxjz Ik Ayj Aqgsn Manufacturer: HAMMEL Model: VB 850 DK Year of manufacture: 2013 Condition: very good Category ID: 2100 Type ID: 2758 Type: two shaft shredder If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2023, functionality: fully functional, KUPER FWM 630 NEW CONDITION (not used) veneer splicing machine for sale! Accessories for start up included. Year of manufacture 2023 Hsdpfx Aqsz Hcabsgsfn Stand projection 630 mm Veneer thickness approx. 0.4-2 mm Feed speed 7 m/min Zigzag stitching Heating head approx. 90 W Foot pedal control Power supply 230 V CE marking (Original operating instructions in german) Gross wight approx. 40 kg Space required (L x W x H) approx. 890 x 365 x 475 mm

Condition: ready for operation (used), Year of construction: 2007, Rotor: approx. 248 mm Hfjdoz Eqhkopfx Aqgen Feed opening: approx. 800 x 1000 mm Rotor length: approx. 800 mm Motor: 18.5 kW Tools: 19 Technical data available upon request Space requirement: approx. 1300 x 2100 mm

Year of construction: 2020, condition: used, Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power. Hfedpfx Asz D Hzqsqgon

Condition: used, Year of construction: 2007, Transnorm accumulation roller conveyor 6300-700-630 RA2074 Make: Transnorm Roller width (RB): 630 mm Nominal/outer width (NB): 700 mm Length: 6300 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Drive Eletrical Data: 380 V, 0,37 kW Accumulating space size: 700 mm Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Hfjdsn R Uazjpfx Aqgjn Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2025, functionality: fully functional, planing width: 630 mm, height adjustment type: electric, number of planer blades: 4, planing height: 300 mm, table length: 1,200 mm, Equipment: motor brake, Houfek Thickness Planer A 630 Year of manufacture: 2025 Motor: 7.5 kW (11 HP) Electric table lift Hsdox Hy Nljpfx Aqgofn Automatic table positioning to specified height Feed table - length 1200 mm Automatic star-delta motor start Electromagnetic brake Infinitely variable feed speed adjustment, 4 - 19 m/min Segmented pressure bar at the infeed, pressure bar at the outfeed Feed rollers: 1x grooved at the infeed + 2x steel rollers at the outfeed 4-point table mounting Min./max. workpiece thickness: 3 - 300 mm Options installed on this machine: Segmented grooved infeed roller Two rubber-coated outfeed feed rollers Cutterblock type "Tersa" Planed thicknessing table 1200 mm Outfeed table extension 1200 mm

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 630-650-500 RA1478 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 630 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2001 Optionally available: Supports Hfedpjk Abccjfx Aqgjn Side guide one and both sides Prices net ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), CATALOG NUMBER 8067 Technical data: - inlet width 400mm - inlet height 200mm - shaft width 540mm - shaft diameter 520mm - knife length 540mm - number of knives 2 pcs - screen dimensions 55x55mm - 2 toothed pull shafts from below - motor for lower shafts 4kW - toothed pull shaft from above - motor for upper shaft approximately 1.5kW - feed belt length 3000mm - feed belt width 400mm - main motor 45kW - automatic reversing (with adjustment option) - dimensions L/W/H 5900x1800x1200mm - weight approximately 3500kg Hodpfxjzuku Ej Aqgjfn Advantages: - German production - with belt feeder - automatic reversing (with adjustment option) - used shredder, very good condition Net price: 68900 PLN Net price: 16023 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Hfedpfx Asra N A Nsqgjn Capacity: 30 kg/h approx.

Condition: used, Year of construction: 2001, We are selling grinding and regulating wheel spindles for a Lidköping CL 630. The machine is no longer for sale! Only the spindles 6x regulating wheel spindles 8x grinding wheel spindles Hedpfxorf Ukqj Aqgsfn Individually or in a package