Used Vem Kd100.1/4 for sale (59,213)

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Guedpez Rvftefx Aqgeh Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2024, condition: used, Type of fuel: Diesel Guedpfxjz Rxk So Aqgoh New: Yes

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Gsdpfxslthgus Aqgouh Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: used, axle configuration: > 3 axles, first registration: 12/2005, total length: 12,590 mm, total width: 2,500 mm, suspension: air, tire size: 385/55 R 22.5, wheelbase: 9,860 mm, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Axle configuration Tire size: 385/55 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 45%; Tire tread depth right: 45% Rear axle 2: Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 3: Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 4: Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 7,500 kg Payload: 45,500 kg GVW: 53,000 kg Guodpfx Aoz R Ditsqgsh Condition Damage: none Identification License plate: OJ-17-DH

Condition: good (used), mileage: 356,000 km, power: 324 kW (440.52 HP), first registration: 06/2012, fuel type: diesel, axle configuration: 8x4, fuel: diesel, driver cabin: sleeper cab, emission class: euro5, loading space length: 7,000 mm, Year of construction: 2012, operating hours: 1 h, Equipment: air conditioning, central locking, electric window regulation, onboard computer, trailer coupling, = Additional options and accessories = - Coupling - Heater - PTO - Radio/Cd/Audio system Gujdpfezqc Tlsx Aqgeh - Rotating beacon - Spotlights - Toolbox - Visor = More information = Transmission: Automaat Front axle: Steering Rear axle 1: Lift axle; Steering Empty weight: 22.440 kg Carrying capacity: 10.560 kg GVW: 32.000 kg CE mark: yes Technical condition: good Visual appearance: good

Condition: used, Jungheinrich Reach Truck COMPACT AND MANEUVERABLE The Jungheinrich EJG is used as a cantilever reach truck wherever reach trucks with radar support cannot be used (e.g., for lateral picking of pallets, special load handling equipment, use with racking systems with impact protection). With an overall width of only 910 mm and high maneuverability, the vehicle can also be used in narrow storage areas. Manufacturer: Jungheinrich Type: EJG 112 Year of manufacture: 2020 Drive type: Electric Load capacity: 1,200 kg Lifting height: 2,500 mm Load center: 500 mm Self-weight: 2,175 kg Basic dimensions: Overall height: 1,880 mm Fork length: 1,150 mm Performance data: Motor: 24 V electric Motor power: 1.6 kW Battery: 24 / 375 V/Ah Charger: 24 V Power transmission: Pulse control Steering: Cantilever steering Year of manufacture: 2020 Type: EJG 112 Gjdpfxezd Um Dj Aqgeuh Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2022, 57 rm. Wide span shelving 60 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 60 cm, disassembled. Gedpez Sk Hcjfx Aqgouh - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5885,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 9.56 linear meters Wide Span Rack, 80 cm Deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Rack offer includes: - 06 x frames approx. 200 x 60 cm, disassembled - 40 x crossbeams approx. 185 cm - 20 x shelf panels approx. 184.5 x 79.5 cm - 40 x cross braces (approx. 80 cm, galvanized) - Includes locking pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights painted blue - New stock, available from warehouse - Other quantities available on request Pre-assembly of the frames can be carried out by us for a small additional charge of €6 net per unit. Delivery is available at a favorable rate upon request. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €1,242.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Guedjz Sk Igspfx Aqgjh Shipping: Delivery by our partner shipping company is available on request; costs are based on your postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to support you throughout your project—from planning and ordering to installation.

Condition: new, functionality: fully functional, machine/vehicle number: CPD25A4800NEU2, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 4,800 mm, free lift: 1,180 mm, mast type: triplex, construction height: 2,225 mm, power: 15 kW (20.39 HP), fork length: 1,200 mm, empty load weight: 4,220 kg, total length: 2,605 mm, drive type: Lithium-Ionen, construction width: 1,163 mm, Electric 4-wheel forklift Chassis number: CPD25A4800NEU2 Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New Technical condition: New Front tire type: Non-marking Front tire condition: New Rear tire type: Non-marking Rear tire condition: New Battery voltage: 76V Battery capacity: 280Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Side shifter, fork positioner, Gsdjy Upzajpfx Aqgouh 3rd valve, 4th valve, rear work light, front work light, heater, full cab, CE certificate, safety light, lithium-ion technology, interior mirror, exterior mirror, windshield wiper, LED, - Electrically adjustable fingertip controls for height adjustment - Blue Spot

Condition: used, Year of construction: 2011, Tires: 800/70 R32 + 600/65 R28, Claas Orbis 600SD corn harvester, year of manufacture: 2015, autopilot, manual transmission, all-wheel drive, automatic central lubrication system, cracker M100/100 teeth, tire pressure control system for front axle, 40 km/h, air conditioning, radio, electric rearview mirrors. Gusdez Sb D Espfx Aqgjh

Condition: used, RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulators, water-cooled Climate chamber 110 m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulators – i.e., a modular climate chamber that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's site. This allows for uncomplicated retrofitting (more depth or additional modules) as well as later relocation. Technical data of the climate chamber: Manufacturer: RS-Simulators Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in the front chamber door, heated 1x (1260 x 1000 mm) in the left side wall, heated Temperature range: -40°C to +120°C Time deviation: ± 0.8K – 1.5K according to DIN 50011 with empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Godpfxjzizlds Aqgjuh Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500 kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4 C) High-performance disk laser with up to 6.6 kW   Type: TruDisk 6602 (4 C)   Gedpfxjzii D Io Aqgeuh The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser with approximately 6.6 kW continuous power – perfectly suited for welding, cutting, and surface treatment processes on metals such as steel, aluminum, copper, etc.   System type: TruDisk 6602 (4 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5   No further testing was carried out in-house. The operating hours could not be read. The laser ran perfectly until the end.   Key technical features: Power: 80 W to 6600 W continuously adjustable, max. 6.6 kW machine tools Beam quality: < 2 mm·mrad for excellent focus handling Wavelength: 1030 nm (infrared), also adapted for green wavelength in special models Output options: Up to 4 laser outputs (4C) for simultaneous supply to multiple process cells Cooling system: Integrated heat exchanger (up to 28 °C inlet temperature), optional compressor cooling (up to 38 °C) Modular and service-friendly: Compact design (< 1 m² footprint), modular components for fast service   Advantages & Applications Maximum process stability: Real-time power control ensures reproducible results Reflection resistance: Patented resonator design allows welding of reflective metals such as copper/aluminum Industry 4.0-capable: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance Energy efficiency: Up to 50% less power consumption thanks to intelligent pulse control and energy-saving modes Versatility: Applications range from welding (also BrightLine for virtually spatter-free results) to cutting, hardening, casting processing, additive manufacturing, laser wire arc welding, etc.   Suitable applications: Ideal for industrial high-power laser applications: Application Features Manufacturing of automotive structural components Deep welding with high reproducibility Copper welding Particularly suitable with green wavelength (> 95 % spatter reduction) Remote hybrid welding Fast processing of large areas with a robust beam Additive manufacturing & hardening Suitable due to beam quality & compact design   Key technical data Property Laser power Up to 6,600 watts (6.6 kW), continuous Beam quality < 2 mm·mrad Wavelength 1030 nm (infrared) Number of outputs (4C) Up to 4 parallel usable fiber outputs Fiber connection diameter 100–600 µm (depending on configuration) Beam guidance Fiber-based, passive (no beam steering mirrors required) Cooling Water/air-cooled, internal or external chiller Dimensions Approx. 1000 × 800 × 2100 mm (W×D×H, depending on the version) Weight ~800–1200 kg (without cooling) Power supply 380 V - 10 % ... 460 V +10 %, 3AC + PE 38 kW / 41kVA 59 A / 400 V 50... 60 Hz Control TruControl 1000/3000, OPC-UA interface Safety standards Laser protection class 4 according to EN 60825-1   Weight: approx. 1200 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, STÄUBLI SCARA industrial robot with CS9 controller TS2-40 4-axis SCARA robot for highly precise pick & place, assembly, and automation tasks For sale is a used SCARA industrial robot from the manufacturer Stäubli, including a CS9 controller. The robot system is ideally suited for fast pick & place applications, Gujdpozlq E Sjfx Aqgjh assembly, packaging, handling, as well as laboratory and automation tasks. The complete system, including controller, original robot connection cable, and accessories as shown in the pictures, will be delivered. Technical data: Manufacturer: Stäubli Faverges SCA, France Model: TS2-40 Robot type: SCARA, 4 axes Robot year of manufacture: 03/2023 Controller year of manufacture: 03/2023 Controller: CS9-TS2-40 Reach: 460 mm Rated payload: 2.4 kg Max. payload: 8.4 kg Robot weight: 38 kg Controller weight: 30 kg Total weight: approx. 68 kg Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Controller: CS9 rack controller VAL 3 activated PROFINET Device REST API integrated Programmable robot controller Connections: Controller power supply: 1 × 230 VAC, 50/60 Hz Power consumption: 1700 VA PROFINET Ethernet Digital inputs/outputs Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller Original robot connection cable (robot ↔ controller) End-of-arm tooling mounting installed Original documentation Accessories as shown in the pictures Application areas: Pick & place Assembly automation Electronics manufacturing Laboratory automation Packaging automation Machine loading Quality assurance Industry 4.0 applications Scope of delivery: Stäubli TS2-40 SCARA robot CS9-TS2-40 controller Original robot connection cable (robot ↔ controller) End-of-arm tooling Accessories as shown in the pictures Condition: Used Year of manufacture 2023. Optical condition as shown in the pictures. System startup and information menus have been tested. Robot system including controller. A teach pendant is not included in the scope of delivery. The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: excellent (used), The FORMAT 4 Tempora 60.06 glueBox is a used edge banding machine from the year 2022. The machine features a touchscreen control system with a pivoting control panel and program memory, as well as the GLUEBOX and a lower glue reservoir with a quick-change mechanism. The use of PUR adhesives is possible. Operation and workpiece transport: Operation is performed via a 15-inch touchscreen. Automatic adjustment of the pressure beam, workpiece feed via a transport chain, and an extendable workpiece support are part of the equipment. The feed speed is 10 m/min. Workpieces with a thickness of 8 to 60 mm and a minimum length of 140 mm can be processed. Edges and glue application: For roll material, an edge thickness of 0.4 to 3 mm is specified. For strip material, edge thicknesses of 3 to 6 mm can be processed. The pressure unit is equipped with a driven roller. The lower glue reservoir can be exchanged using the existing quick-change mechanism. Processing units: The diamond-tipped trimming cutter operates in both forward and reverse directions and has dimensions of 80 x 64 mm. Its power is 1.1 kW. The miter saw is equipped with two high-frequency motors and can be pneumatically pivoted. For further processing, a flush-cutting and radius-cutting unit with motorized positioning control, x-motion PLUS, and a corner-copying unit with a diamond-coated cutter are available. For finishing, a radius scraper and an insert-controlled surface scraper are available. The equipment is complemented by spray devices for release agents, lubricants, and cleaning agents, as well as an infeed stop. Gusdju R S Nwspfx Aqgeh Condition: This used machine has been workshop-tested and is ready for immediate use. Quality information: - All settings have been checked. - Adjusted according to manufacturer's specifications. - Complete basic inspection. - Complete basic cleaning. - Electrical system checked. - Pneumatic system checked. - Ready for immediate use.

Condition: used, machine/vehicle number: 8830469, Starting resistor, series resistor, resistor -for testing large electric motors -Power: 125 A -with control cabinet -3x amps display 250 amps -(technical data see photos) Godpfx Aqsb Uhvmjgouh -Dimensions: 720/800/H1000 mm -Weight: 128 kg

Condition: used, Gear motor, electric motor -Speed: 83 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 40 mm Guedpfx Aqeckbf Iogjh -Protection class: IP 33 -Weight: 56 kg

Condition: excellent (used), two-armed drill, rotary drill, magnetic drill -Recording: MK3 -Nominal consumption: 1100 W -Connection: 380 volts Gusdpfjb E Aq Sjx Aqgoh -Max. Drill diameter: 32 mm -Dimensions: 550/560/H150 mm -Weight: 17 kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: VEM, electric motor type DMK 5/6 RA -Power: 3.5 kW -Speed: 950 rpm Guodpfx Aegfrbqoqgeh -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: P33 -Dimensions: 515/360/H285 mm -Weight: 77 kg

Condition: good (used), Electric motor, three-phase motor Gujdpjghidzefx Aqgjh -Power: 0.37 kW -Speed: 920 rpm -Shaft: Ø 19 x 40 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 250/166/H185 mm -Weight: 11 kg

Condition: used, Gear motor, electric motor -Spare parts come: from grinding machine WERKO SKSt 200 -Motor: VEM type KR 63,1/2 THAII -Motor: 220/380 V/0.18 kW -Protection class: IP 44 -Shaft: Ø 20 mm -Dimensions: 410/330/H220 mm Gedpefdg Iijfx Aqgeuh -Weight: 35 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KRA 80.2/6 -Speed: 20 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 23 kg Gjdpfx Aopu Iuneqgjuh

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic reservoir -Hydraulic pump: pressure up to 150 bar, unfortunately without type designation -Flow rate: 12 l/min -Motor: VEM 4.0 kW / 1430 rpm -Hydraulic tank: -Individual components: see photos -Dimensions: 500/480/H700 mm -Weight: 106 kg Gjdpepg N Sljfx Aqgsuh

Condition: ready for operation (used), Philips 4022 226 3643 RM / RM DRIVE MOD card, condition and serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Guodpfx Aqei Echksgjh

Condition: ready for operation (used), Philips 4022 226 3656 RM DRIVE MOD card, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gjdei Eciajpfx Aqgjuh

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. Gujdpjguk Dkefx Aqgeh When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.