Used Wedge Bonder for sale (465)

Condition: new, mileage: 500 km, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGM 18.320BL 4x2 GSR NEW EURO6 with Meiller Skip Loader AK 12 MT GSR – Turning Assistant, Lane Departure Warning, Emergency Braking Assist, Rear View Camera, etc. First Registration: Unregistered Year of Manufacture: 2024 Mileage: 500 km Color: Pure White RAL 9010 Technical Specifications: 235 kW * 320 hp * Tire – Front axle + Rear axle: 315/80R22.5 TL * Gross Vehicle Weight: 18,000 kg * Emission Class: Euro 6 * Transmission: Automatic * Condition: New Vehicle Chassis Equipment * Wheelbase: 3575 mm * Cruise Control * MAN PowerMatic 08.13 OD * Exhaust pipe on the right side with end pipe towards the center of the frame * Cab: CC (Comfort Cab) Pedpfji Ti Uuex Agkegn * Front axle offset, front springs: parabolic, 7.5 tons * Rear axle: air suspension, 13 tons * Rear axle: Hypoid * Differential lock in rear axle * 220L fuel tank and 35L AdBlue tank * Trailer coupling: Rockinger 400 G 150A * ABS, ASR and ESP * Stone chip protection grille at the front * Multifunction steering wheel * Disc brakes front and rear * Lifting roof * Cab rear wall with window * Sun visor * Driver comfort seat with air suspension * Air conditioning: Climatronic * Interior trim: Moon Grey * Center storage compartment in the cab * Work lights on the cab roof * Daytime running lights, LED and fog lights, H7 * Preparation for flashing beacons on the cab roof * Radio: MAN Media System Navigation Advanced with 7" display and navigation for Europe * Lane Departure Warning System (LDW) * Emergency Braking Assist * Tire pressure monitoring system * Turning Assistant * Traffic sign recognition * Driver alertness system * Preparation for alcohol interlock system * Sound system * Rear view camera * Smartphone integration, Bluetooth Body Equipment * Meiller Skip Loader AK 12 MT * Loading platform: 3730 mm long, telescopic support arms with automatic guidance * Suitable for transporting containers with a volume of 20 m³ in accordance with DIN 30720 (depending on chassis) * I.S.A.R. Control Version 3, wireless remote control with start/stop function * Meiller securing loops * 3.5 mm aluminum floor * Aluminum storage box with lid, 140L * Load-dependent express gear for quickly discharging the container * Speed regulation * Pneumatic triple tilting hook with locking mechanism * Tilting hook distance (M): 610 mm * Hydraulic container locking mechanism using locking hook at the rear * Lateral hydraulic container clamping device for containers in accordance with DIN 30720 and mobile compactor containers in accordance with DIN 30730 * Wedge holder * Contour marking on the cab and body Technical Specifications: * 235 kW * 320 hp * Front and rear tires: 315/80R22.5 TL * Gross Vehicle Weight: 18,000 kg * Emission Class: Euro 6 * Transmission: Automatic * Condition: New Chassis Equipment: * Wheelbase: 3575 mm * Speed control * MAN PowerMatic 08.13 OD * Cab: CC * Front axle offset, front springs: parabolic, 7.5 tons * Rear axle: air suspension, 13 tons * Rear axle: Hypoid * 220L fuel tank and 35L AdBlue tank * Trailer hitch: Rockinger 400 G 150A * ABS, ASR and ESP * Disc brakes front and rear * Lifting roof * Sun visor * Driver comfort seat with air suspension * Air conditioning * Work lights on cab * Daytime running lights, LED, and fog lights * Radio: MAN Media System Navigation Advanced with 7" display and navigation for Europe * Sound system * Lane Departure Warning System (LDW) * Side Guard Assist * Emergency Braking System * Tire pressure monitoring system * Rear view camera * Smartphone integr

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement. Pjdpezc D Aaofx Agkjgn

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Psdpfx Agezc Dyxeksgn Machine can be inspected under power by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,700 mm, total length: 1,800 mm, total width: 1,600 mm, feed length X-axis: 560 mm, feed length Y-axis: 280 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 200 kg, grinding height: 400 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 1 m/min, grinding wheel diameter: 200 mm, distance table to spindle center: 450 mm, table speed: 25,000 mm/min, table length: 520 mm, table load: 200 kg, type of input current: three-phase, table width: 250 mm, grinding wheel width: 20 mm, spindle speed (max.): 2,850 rpm, spindle speed (min.): 2,850 rpm, overall weight: 950 kg, distance stand to spindle center: 300 mm, table height: 700 mm, grinding spindle motor power: 1,500 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 1 m/min, travel distance X-axis: 560 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 400 mm, rotational speed (min.): 2,850 rpm, grinding spindle speed: 2,850 rpm, distance table to quill: 450 mm, warranty duration: 12 months, grinding wheel speed: 2,850 rpm, input voltage: 400 V, disc diameter: 200 mm, control cabinet length: 600 mm, control cabinet width: 400 mm, control cabinet height: 1,200 mm, space requirement height: 2,500 mm, space requirement length: 3,000 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, SURFACE GRINDING MACHINE SGA-2550AHD WITH PLC CONTROL The professional SGA-2550AHD Surface Grinding Machine has been designed for precision machining of flat surfaces in tool rooms, manufacturing facilities, and metalworking workshops. Equipped with a PLC control system, electromagnetic chuck, and high-quality components, the machine delivers excellent grinding accuracy, high repeatability, and outstanding operator comfort. The robust machine structure ensures stability during operation, minimizes vibration, and allows for superior surface finish quality. The grinder is ideal for machining tool steel, structural steel, cast iron, and other materials requiring precision grinding. MAIN ADVANTAGES • PLC Control System • Electromagnetic Chuck • High Grinding Accuracy • Rigid Machine Construction • Professional Coolant System • Easy Operation and Programming • Excellent Process Repeatability • CE Certified PRECISION MACHINING The SGA-2550AHD is equipped with a 250 × 520 mm working table and a 250 × 500 mm electromagnetic chuck. This configuration provides secure workpiece clamping and excellent machining accuracy. PLC CONTROL SYSTEM The modern PLC control system improves grinding efficiency, increases productivity, and allows easy adjustment of machining parameters. It is suitable for both single-piece and serial production. STANDARD EQUIPMENT • Coolant Tank • Electromagnetic Chuck • Balancing Arbor • Wheel Flange • Wheel Extractor • Leveling Wedges and Bolts • Tool Box and Service Tools • Standard Grinding Wheel • Working Lamp • Wheel Dresser Stand OPTIONAL EQUIPMENT INCLUDED • Full Working Area Protection • Magnetic Separator • Dust Collection System • 2-Axis Digital Readout (DRO) • Built-in Electromagnetic Chuck Controller • Wheel Balance Stand • Diamond Dresser SAFETY The machine is equipped with all necessary safety systems in accordance with European standards. The robust construction, protective guards, and CE marking ensure safe and reliable operation. TECHNICAL DATA Model: SGA-2550AHD Working Table Size: 250 × 520 mm Electromagnetic Chuck Size: 250 × 500 mm Control System: PLC APPLICATIONS • Tool Rooms • Manufacturing Plants • Mechanical Workshops • Tool Steel Grinding Pgedszd U Eyjpfx Agkon • Structural Steel Machining • Cast Iron Machining • Precision Machine Component Production DELIVERY AND SUPPORT We organize machine transportation throughout Europe. We provide technical support, commissioning assistance, process consulting, and access to spare parts and after-sales service. CONTACT US If you require additional information or a customized quotation, our specialists will be pleased to assist you. We also invite you to explore our full range of metalworking machinery available on our website.

Condition: used, maximum load weight: 28,460 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2017, loading space length: 7,500 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 26 m³, Year of construction: 2017, Equipment: ABS, Air, lift, BPW disc, EBS, aluminum support leg, PVC half-shell mudguard, UFS foldable made of aluminum, floor 4 mm Hardox, side walls and front wall made of 40 mm aluminum wooden profiles, side wall on the left 1x vertically divided pendulum, corner stanchions fixed at the front and rear, one center stanchion on the left, clay wedge, tensioning chains, bulk material deflector on the left side, RW 4 mm Hardox pendulum, chute, walkway with ladder, PVC roll-up tarpaulin with central locking, loading pressure gauge, WZK Pgedpfx Agsv Ttpaokon

Condition: used, maximum load weight: 32,260 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2015, next inspection (TÜV): 09/2026, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, According to our 'General Terms and Conditions'—offered without any guarantee or warranty—we can present you today, subject to prior sale, error, and typographical mistake, the following vehicle on a non-binding basis until finalized: Krone Curtain Side Mega Trailer with Joloda Tracks (Unit 152) First Registration: 10/02/2015 Model: SD Gross permissible weight: 39,000 kg Unladen weight: 6,740 kg Payload: 32,260 kg Inspection (TÜV) valid until 09/2026, Safety inspection (SP) until 03/2026 Fixed bulkhead Curtains on both sides Edschaverdeck sliding roof Lifting roof 13 pairs of lashing rings on outer frame Floor with Joloda tracks + load securing pins/wedges Portal doors 1/2 and 1/2 at the rear 1 pair of LED work lights – 1 each left and right on the front frame 2 x 12t 2-speed gearbox support winches Spare wheel approx. 40% tread, center underbody 1st axle is a lift axle BPW drum brakes Tyres: 425/45R19.5 (1st axle approx. 30/70%, 2nd axle approx. 40/40%, 3rd axle approx. 30/30%) Pjdpfx Ageyvmzmokjgn 2 x LED reversing lights, 1 x red fog light, rear Price: €3,500.00 (net) All information provided without any guarantee or warranty. Our 'General Terms and Conditions' apply. Legal venue for disputes up to €50,000.00 is the Ludwigslust District Court; for higher sums, jurisdiction lies with the Schwerin Regional Court. Subject to prior sale, errors, and typographical mistakes.

Condition: used, Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, Basic package Inventhor 6: Pgsdpfsxx N Dgox Agken - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/1994, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 800 mm, total length: 2,540 mm, total width: 3,000 mm, suspension: air, tire size: 385 / 65 R 22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, 1st axle can be lifted, last axle is forced-steered, lifting and lowering function, ABS (anti-lock braking system), storage box. Last axle is forced-steered via wedge. Intended for mounting a roller crane. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale and errors! Pgjdsi Rqpqspfx Agkon

Condition: used, empty load weight: 7,400 kg, maximum load weight: 27,400 kg, overall weight: 34,800 kg, axle configuration: 3 axles, first registration: 01/1989, loading space length: 12,800 mm, loading space width: 2,450 mm, loading space height: 2,450 mm, loading space volume: 77 m³, total length: 2,500 mm, total width: 3,750 mm, suspension: air, tire size: 14/80R 20, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, air-suspended, last axle positively steered, ABS (anti-lock braking system), roller shutter, aluminum side bumpers, supports Body: box semi-trailer with roll-up door, last axle positively steered via wedge, was used by the previous owner as a factory-internal semi-trailer (for trade fairs). Podpfxevhhfle Agksgn The trailer is currently being rented out but can be viewed at any time! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! - .

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Description Solid/liquid separation unit based on a centrifugal sifter (Centri-Sifter): solids are conveyed along the basket/screen by a paddle, while the liquid is separated and discharged through a dedicated outlet. Adjustable inclination to optimize residence time and separation efficiency. Sold with a 1000 L hopper and a flexible screw conveyor. In like-new condition (used only for testing), fully functional, and available immediately. Main equipment – Centri-Sifter • Type: centrifugal sifter (liquid outlet + solid outlet) • Construction: 304 stainless steel • Basket/screen: wedge wire basket (304 stainless steel) • Paddle: “expanded 7.5°” (304 stainless steel) • Safety: inspection door with interlock (operator safety) • Weight (machine): ≈ 220 kg • Purge air/gas (seals): clean/dry/filtered air/gas required Motor (motor plate) • Motor 3~: 2.2 kW, 50 Hz, 230 V Δ / 400 V Y • Speed: 1450 rpm (50 Hz) • Protection / efficiency: IP55, IE3 • Mounting: IM B35, service S1 Included equipment (sold with) Podszc H H Ijpfx Agkogn 1) Hopper • Volume: 1000 L • 304 stainless steel, open design, “food grade” finish (Type C Plus) • Level probes: high + low • 30° outlet 2) Flexible screw conveyor • Supplier: Spiroflow Ltd • Model: 146SH • Length / inclination: 3 m 30° • Outlet: Ø300, 30° standard • Components: reverse bung / drop trap / QR flanges (quick disassembly) Price and conditions • Availability: immediate • Location: Martigny (Switzerland) • Condition: like new, functional • Visit / inspection: upon request Transportation costs are the responsibility of the buyer.

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. Pjdeyhzhzspfx Agkegn We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, maximum load weight: 35,585 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 12,950 mm, loading space height: 1,347 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, 3-axle semi-trailer LOGO 14XL specifically designed for OFF-ROAD and ON-ROAD use! * Electronic air suspension * 3 individual axles, manufactured by SAF, 9 tons with disc brakes * 1st axle liftable, 3rd axle with trailing steering * Radio remote control for operating the frame locking system and the brakes * Manual mechanical outriggers * Bolsters: 8x ExTe D7 (Position 1 with double pockets, Position 2 adjustable and with flat rung pockets, as well as with a quick-release wedge system) * Rungs: 14x ExTe D7 telescopic rungs, 2x ExTe D10 telescopic rungs * Tires: 385/65 R 22.5 on steel rims Pedpfogqc Eaex Agkjgn * EBS braking system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Air tank made of aluminum * 1x grapple cable * 1x shunting coupling * Frame + bolsters in RAL 9011 graphite black * All components comply with EC regulations Various optional equipment available. Further information upon request. Illustrations may differ from the original. Specifications are subject to change without notice. Contact: Niclas Lott Tel.:

Condition: new, maximum load weight: 35,700 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 10,735 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, 3-axle semi-trailer LOGO 14X specifically designed for OFF-ROAD and ON-ROAD use! * Electronic air suspension * 3 individual axles, manufactured by SAF, 9 tons each with disc brakes * 1st axle can be lifted, 3rd axle is steered * Remote control for operating the frame locking and the brakes * Manual support legs * Stanchions: 8x ExTe D7 (Position 1 with double pockets, Position 2 adjustable and with flat stanchion pockets, as well as with a quick-release wedge system) * Posts: 14x ExTe D7 telescopic posts, 2x ExTe D10 telescopic posts * Tires: 385/65 R 22.5 on steel rims * EBS braking system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Air tank made of aluminum Pedpfshnak Iex Agkjgn * 1x grab rope * 1x shunting coupling * Frame + stanchions ExTe D7 in RAL 9011 graphite black * All components comply with EC regulations Various additional equipment available. Further information on request. Illustrations may differ from the original. Specifications are subject to change without notice. Contact: Niclas Lott Tel.:

Condition: new, maximum load weight: 34,720 kg, overall weight: 39,500 kg, axle configuration: 3 axles, loading space length: 9,195 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, 3-Axle Semi-Trailer LOGO 10X * Steel flat sheet cover welded over kingpin * Steel chequer plate cover welded at the rear * Electronic air suspension * 3 single axles, SAF brand, 9 t with disc brakes * 1st axle liftable * Manual landing gear * Bolsters: 6x ExTe D10 (position 4 with double pockets, position 5 with flat stanchion pockets and quick-release wedge system) Pgsdpfxjrymwzo Agkon * Stanchions: 8x ExTe D7 telescopic + 4x ExTe D10 telescopic * Tyres: 385/55 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Air tanks made of aluminium * 3x grab protection devices between the bolsters * Frame + bolsters in RAL 9011 graphite black * All add-on parts according to EU regulations Images may differ from the original. Information subject to change without notice. Contact: Niclas Lott Tel.:

Condition: new, Year of construction: 2026, PROFESSIONAL 14 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 700 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. The wood splitter is equipped with an overload valve draining oil to the tank and an efficient, failure-free gear pump. Pjdoridp Eopfx Agkjgn Device equipped with side tables The angled wedge makes it easier to sink the wedge into the material. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3.5 kW / 400 V Pressure 14 T Max. wood length 1040 mm Wood diameter range approx. 100 - 700 mm External dimensions 1440 x 1350 x 2280 mm Weight 185 kg

Condition: used, machine/vehicle number: WFDFLT33902030001, empty load weight: 6,075 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, total length: 13,850 mm, total width: 2,550 mm, total height: 3,940 mm, suspension: air, tire size: 435/50 R19,5", Please note: The images shown are archive images. The vehicle may still be in use. "Preload" – slight preload in the neck area, drawbar coupling with a replaceable 2" kingpin, outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps, 24 tons, 2-speed landing gear, single-sided operation. Door lock on the side, support wedges with holder, aluminum side impact protection, galvanized steel under-ride protection, quarter-panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection, pallet stops on both sides, approx. 15-20 mm high, in bolted design, loading height reduced by approx. 15-20 mm, plastic tool box with drawer and insert, b=650 / h=520 / d=670 mm. Axles + Suspension SAF disc brake axles, "axle/chassis laser-measured" – reduces tire wear and fuel consumption, air suspension, 1st axle is an automatic lift axle, including forced lowering and start-up assistance, axle lift below the recommended driving height. Braking system 2-line compressed air braking system, spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Note: with lift and lower valve, ride height in connection with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm. Pedpfxszcmmzs Agkogn Wheels and Tires 435/50 R19.5", steel rims. Electrical System 24 Volt, multi-chamber lights, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connection cable. Floor Sieve-printed panels, approx. 30 mm thick, on longitudinal supports for high point loads, for forklift axle load up to a maximum of 7100 kg. Front Wall / Front Corner Posts 2580 mm high, corner posts made of steel in a box-section design, release mechanism for side tarpaulin on the front wall. Intermediate Posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insertion pockets and a long pocket at the bottom. 3 pairs of post positions Insertion strips 5 rows of aluminum insertion strips + Vario strips. Rear Wall / Rear Corner Posts Rear corner posts made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Tarpaulin Tarpaulin with welded-in horizontal and vertical straps, tensioning closures made of stainless steel. Roof Fliegl-Blitz sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2490 mm, tarpaulin color: white (in connection with the sliding tarpaulin, without running carriage at the front). Country of Approval / Plates Germany, type approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for body strength according to EN 12642 XL, Fliegl manufacturer's certificate for body strength according to DL 9.5, pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm, Fliegl manufacturer's certificate for load securing according to VDI 2700 Sheet 12 ff., pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm, prepared for license plate holder, single row, warning sign according to ECE - 70, reflective strips: white, continuously on the lower part of the

Condition: new, loading space length: 8,000 mm, loading space width: 1,350 mm, loading space height: 450 mm, color: red, Year of construction: 2024, Color: Red Manufacturer: Goldhofer Type: Crawler deck / Spinebed BB 450 A Chassis number: 2100788 Year: 2024 – NEW/ Unused General Extendable, from 8,000 mm to 13,000 mm Payload capacity 100t / 120t in combination 4+6 Design height 450 mm; length 8,000 mm, width 1,350 mm Extendible in steps of 500 mm At the rear, lashing coupling for connection to THP bogies At the front, claw couplings for connection to a gooseneck or claw coupling adapter Integrated supply lines for hydraulics, brakes, and electrics with connection couplings Weight approx. 14,400 kg Loading security 1 pair of lashing rings (LC = 30,000 daN) in the rear coupling head 8 pairs of lashing rings (LC = 20,000 daN) arranged on the outside of the outer beam Side extensions Psdpfevnb Nwox Agkogn Fold-out outriggers and inserts on the outer beam (basic length) Fold-out side extensions and mattresses on the inner tube 1 x Quick coupling adapter THP/SL To connect the coupling claws of a deck to coupling lashes of a modular bogie or a gooseneck Deadweight 1,600 kg 1 x Drive-on wedge for excavator deck in steel execution (4 pieces) Weight 360 kg = Further Information = General Information Year of construction: 2024 Weights Unladen weight: 14,400 kg Payload: 120,000 kg GVW: 134,400 kg Functional Loading platform height: 45 cm Extendable platform: Yes Condition Overall condition: very good Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Psdpfei Ri Euox Agkegn Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: new, functionality: fully functional, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, SARIS CW 205 113 750 1 NEW VEHICLE Internal dimensions: 205cm x 113cm Side panel height incl. railing: 43cm Loading platform height: 51cm Total weight: 750Kg Payload: 595Kg Unbraked single-axle flatbed trailer KNOTT axle Low chassis Fully welded, hot-dip galvanized steel frame Steel railing Rear side panel foldable and removable 15mm thick, non-slip, and robust screen-printed wood floor and side walls 6 lashing eyes with 400Kg tensile force 13" tires Pgjdezcawgspfx Agkon M+S tires Net/rope hook on the frame 13-pin connector Side marker lights at the front Lights at the rear with reversing light and triangular reflectors Plastic mudguards 2x wedge Drawbar OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Foldable and removable front panel -Ramps -Tilting loading platform -Gas springs for tilting loading platform -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Flat cover with or without bows -High cover 120cm -Rear supports -Support wheel Further accessories available on request! Plus freight to Gera and vehicle registration document 100 € net Pictures are examples and may show optional accessories at an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Specialist for axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come directly to our location.

Condition: excellent (used), Year of construction: 2003, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2100 mm column arm 200 mm stroke of upper beam 100 mm dayligth 280 mm table height 840 mm working feed 10.0 mm/sec return speed 70.0 mm/sec back stop - adjustable max. 650 mm Control ATS 560 oil volume ca. 150 l voltage 380 V total power requirement 7.5 kW weight of the machine ca. 4700 kg Equipment: - electro-hydraulic NC press brake - easy to operate - HACO NC control model ATS 560 * 7-digit LED display * Memory capacity for 200 programs with a maximum of 400 sets * Working with pressure and immersion depth * Inching function for electric backgauge * Set / actual value input for back gauge * Swiveling control panel, left front - NC controlled axes : Y1 Y2 X axis - NC electro-hydraulic synchronization and immersion depth positioning - NC electro-motorized backgauge * with ball screws * speed 240 mm/sec. * including 2x manually adjustable stop fingers in width and height * backgauge programmable to an accuracy of 0.1 mm - Manual table crowning, with handwheel and analog display - "SYSTEM A" top tool holder, incl. top wedge crowning - "SYSTEM A" bottom tool holder - Various insert/bending tools - 1x freely movable 2-hand/foot control * only moves at working speed - Operating instructions Pgodpfx Agozbc Dmsksn also included in the scope of delivery (built-in): - 1x brand new / split set of upper tools * UKB 11,200 mm - 3x 835 mm * Angle 85° - Radius R 0.8 mm - Height 66.5 mm * Load capacity 1000 kN/m max - 1x brand new / split set of bottom tools * UKB 21.207 - 3x 835 mm * V openings = 16/22/35/50 mm * Angle 85° * Load capacity 800 kN/m max.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Pgjdpfx Aoi Ri Avogkon Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins and 2 kingpin positions. Front locking on tipper ram mount with bilateral tapered wedges, rear locking on continuous swivel shaft with return spring. Container mounts: Locking crossmember, 2-fold for locking 1 x 20 ft or 1 x 30 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt locking. 24 ton, 2-stage support jack, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1850 mm. 2 chock blocks with holder. Half-shell mudguards with anti-splash flaps according to EC standards. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Actuation hydraulically via truck auxiliary drive. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Axle/chassis laser-aligned, reducing tire wear and fuel consumption. Axle spacing offset mm (combined transport) up to 44 tons total weight. Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load reduction for easy telescoping. 2 fail-safe coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab; the truck must be pre-equipped accordingly, no truck installation. Wheels and Tires 385/65 R22.5, manufacturer's choice. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Additional LED work light at the rear, switched via reversing light. Country of Approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single-line. Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Paintwork Frame DB 7350 Novagrau (dark gray) 10-year warranty against rust-through. Support legs, black coated. Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable king pins and 2 king pin positions Container receptacles: Included Rear extension retracted: 1 x 20 ft, flush with the rear, note: low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang Without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. Plug adapter for front locking, to secure containers without a tunnel from below, with bracket when not in use Rear extension on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underride protection Extendable underride protection for 45 ft containers Half-shell fenders, included with anti-spray flaps according to EC regulations Psdpsi Ri Eqofx Agkegn Rear impact guard Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total train weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded lines for easy servicing 200 spring-loaded parking brake 2 keyed coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In some towing vehicles, false diagnoses may occur, even though the function is working) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connecting cable Operating Instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from king pin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underride protection must be manually extended! An exemption permit according to § 70 StVZo is required! Registration Country/Signs Germany with DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder 390 contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized including passivation 15-year warranty against rusting Support legs black coated

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Podpoi Riwmofx Agkegn Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Condition: used, machine/vehicle number: WFDFLT21802026297, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Please note that the images are archive images! The vehicle may still be in use! Further information: Fine-grained steel welded construction, front stop, adjustable and foldable lengthwise, pair of removable guide rollers, front and rear, Swap Guard - interchangeable container guide, in front of and behind each container lock, 4 container locks with sturdy outriggers for 20-foot base interchangeable containers 7.15 and 7.45, turntable with robust ball bearing, chock with holder, aluminum side impact protection, side impact protection positioned inwards for optimal clearance to the interchangeable container supports, steel underrun protection, shortened underrun protection for optimal clearance to the interchangeable container supports, lighting system mounted with protection, quarter-shell fenders at the front and half-shell fenders at the rear, without impact protection, spare wheel holder in body design, plastic toolbox Drawbar (L = 2,200 mm) with tested 40 mm drawbar eye, drawbar length, drawbar height adjustment via spring Podpfx Aoi Ri Dzegkegn SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension 2-line compressed air braking system, color-coded line routing for easy servicing, air reservoir 208 liters, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connection lines to the tractor unit, EBS, electronic braking system with EBS connector at the front, with connection cable. (Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS!) with raise and lower valve, holding function in both lowering/raising positions, brake release function via button on the vehicle next to the raise and lower valve, to release the brake when coupled, EBS power supply must be guaranteed! 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole connector at the front, with connection cable, additional LED work lights at the rear, switched via reversing light, LED work light at the front in the middle between the beams, shining backwards, switched via reversing light Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, warning sign according to ECE - 70, ADR warning sign at the rear, foldable, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Please note that the images are archive images! The vehicle may still be in use!

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Please note: The images are archive images! The vehicle may be in use. Further information: Fine-grained steel welded construction, front stop, adjustable and foldable lengthways, pair of removable guide rollers, front and rear, additional 4 container locking mechanisms with robust outriggers on a 20-base for interchangeable containers 7.15 and 7.45, turntable with robust ball bearing, chocks with holder Pgsdpfx Aji Riz Hjgkon Aluminum side impact protection, steel underrun protection, quarter panel fenders at the front and half-shell fenders at the rear 1 spare wheel holder for 1 spare wheel, with wheel fastening kit in body design Drawbar with tested 40 mm drawbar eye, drawbar height adjustment via spring BPW disc brake axles, axles/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension 2-line compressed air brake system, color-coded line routing for easy servicing. Air reservoir 208 liters Spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, EBS manufacturer Wabco, electronic braking system with EBS plug at the front, with connection cable (Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS!) with raise and lower valve, holding function in both lower and raise positions 24 Volt, 4 x 3-chamber lights + 1 round reversing light + 1 round rear fog light, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pole plug at the front, with connection cable, 1 additional LED work light, at the rear, switched via reversing light, 1 LED work light at the front, in the center between the beams, shining to the rear, switched via reversing light Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Please note: The images are archive images! The vehicle may be in use.