Used Weeke Venture 5 for sale (59,648)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 5,000 kg, Welding positioner with 5-ton load capacity, in excellent condition, complete set including dual foot remote control and hand remote control. Tilt and rotation speed steplessly adjustable from 0.05 – 1.0 rpm. Clamping plate diameter: 2.0 meters. Height when tilted to center approx. 1.18 m (plus pedestal 0.1 m). Height horizontal approx. 1.4 meters. Length 2.2 m, width 2.0 m. Kedjxxu Dropfx Anwjdn

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Kedsvbdpyopfx Anwodn Depth (mm) 920

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg Kdjdevllxdjpfx Anwjn The radiator has been technically inspected, fully functional

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 43,500 mm, total height: 3,500 mm, clearance between the columns: 2,700 mm, shelf height: 3,500 mm, number of shelf rows: 5, pallet spaces: 135 euro pallets, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 43,500 mm, support length: 2,700 mm, 5 rows of pallet racking (5 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, load capacity 3000 kg. - 20 frames (RM3511 - RAL5019) Kdedpoza R Ecefx Anwsn - 40 base plates, shims, fastening materials - 80 floor anchors (ZZBA1210) - 60 single beams (T27114 - RAL2008) - 5 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivered free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made to the entire territory of the Federal Republic of Germany; except for islands! Deliveries to EU countries are made according to individual agreements.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, WE OFFER AN NICE WORKING CONDITION SPINNER U-620 MACHINE WILLBE AWAILIBLE FROM THE PRODUCTION IN FEBRUARY 2026 WITH MACHINE WILL COMES FULLY EQUIPMENT TOOLS AND ACCESSORIESS WITH FULL TOOLS AND ACCESSORIESS MACHIE WILL BE IN FEBRUARY AWAILIBLE FROM THE PRODUCTION OF TOOLMAKER TECHNICAL DETAILS: CONTROLS: HEIDENHAIN ITNC 530 YEAR : 2013 SPINDLE WORKING HOURS: 31995 PROGRAM RUN: 30893 MACHINE ON: 49012 TRAVELS AXES: X=620 mm Y=520 mm Z=420 mm Table diameter: 560 mm Max. part weight: 500 kg Max. spindle speed: 12.000 Rpm Connection power: 29kW Kedpfx Anjydrztowodn Tool holder SK40 Tool changer 32-fold Max lenght of tool: 290mm Max mass of tool: 7kg TRANSPORT DIMENSIONS: L 3500 X W 2300 H 2910 WEIGHT OF MACHINE: 7100 KG FOR DISMANTLING AND LOADING WE CARE WITH AN PROFESSIONAL TEAM WE ALSO CAN ORGANIZE FOR CUSTOMERS TRANSPORT TO THE SITE OF THEIR COMPANY

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 12 Total number of tool changer positions: 14 Ksdpfxjx A Tcus Anwedn

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Kdsdpoyw Tupjfx Anwsn Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Ratio 1:4 5 mm B 78 mm E 55 mm F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck One-piece hard external jaws One-piece hard internal jaws Key

Condition: good (used), Year of construction: 2008, functionality: fully functional, We offer for sale: WEEKE (Homag Drilling Systems) – OPTIMAT BHC 200 – High-Precision CNC Machining Center Technical data: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY • Dust-protected linear guide system • Rack-and-pinion drive in X-axis; ball screw drive in Y- and Z-axes • Axis travel: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Worktable: - X = 5250 mm (length) - Y = 1250 mm (width) - Z = 100 mm (thickness) (Optimat BHC200) • Control system: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changer o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Suitable for machining wood, plastics, and light metals • Condition: Good; very well maintained, serviced regularly / last service 03/25 • 10/2022 – Machine upgrades: - New industrial PC (Siemens Industrial PC) - woodWOP 8 / Windows 10 update Advantages of the HOMAG BHC200: • Precise and efficient machining of a wide range of materials • Ideal for joineries, furniture manufacturers, and custom productions • Reliable performance even for demanding projects Kdedpfswx Iidsx Anwjn Scope of delivery: • Machine + industrial PC • Operating manual • CE SAFETY AND PROTECTION DEVICES - Side and rear safety fencing - Three-segment safety tread mat in the front area allows loading of workpieces in the non-active working zone Inspection and test run on site are welcome! Dismantling and transportation are to be arranged by the buyer.

Condition: used, This listing is for a second-hand DTG pre-treater, the ‘Schulze PRETREATmaker 5’ Condition: This is a second-hand unit, which may show signs of wear (minor scratches or discolouration). The device has been tested and is in working order Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly. Kdodpfsy R Nrkjx Anwsn

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table Kdjdpfx Aey Sny Aenwsn - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 742 mm, total length: 1,027 mm, total width: 852 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - special tray + 1 year warranty + incl. aquamatic system + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,027 mm Width: 852 mm Height: 742 mm Weight: approx. 1,580 kg Kedpfx Ajy Rnrvsnwjdn Suitable for the following models and others: Daewoo B30 X-5 Common battery sizes available, inquiries welcome. Transport available.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, We offer refurbished turbines from a continuous shot blasting machine - Rösler RRB 22/5-L. Turbine type - Hurricane H42. The turbines have been refurbished using original spare parts made of tool steel. Shot blasting machine, sandblaster, blasting turbine, shot blasting, sand blasting, throwing turbine. Kodpfx Aoyy Rybsnwedn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, shelf height: 5,000 mm, number of shelf rows: 10, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Kjdpfxeyzl T Es Anwsdn Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0 - 250 - 04 - 0558, Technical data : X working area 2,500 mm Working area Y 800 mm Z working area 40 mm Number of milling spindles 2 Vertical drilling spindles 16 Drilling spindles in X axis 2 Drilling spindles in Y axis 1 Vacuum pump Machine table traverse table Weight approx. 3,500 kg CNC drilling and milling center WEEKE BP 10 , built in 1991. Kjderwmwfjpfx Anwedn Panel area 5,200 x 1,500 mm. Machining area 2,500 x 800 mm, 16 vertical drilling stations, 1 keyway saw, 2 milling units, support plate handwheel and hydraulic unit. In 2016 he switched to Linux CNC 3D - new computer, new monitor, new software.

Condition: used, diameter div. Kjdeww Nb Eopfx Anwodn number 36x tool adaptor BT 40

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Ksdpsy Nkwrjfx Anwjdn Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Kjdsu N Skfepfx Anwodn Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, WE OFFER AN VERY NICE CONDITION MACHINE WEEKE OPTIMAT BP 140 MACHINE COMES FROM A FIRST OWNER AND ONLY ONE PERSON WORKING ALL TIME ON MACHINE. VERY GOOD CONDITION AND GOOD OPORTUNETEY TO BUY AN VERY NICE MACHINE. MACHINE IS READY TO WORK Ksdevkklgopfx Anwjdn INCLUDES SAFETY CARPET VACUM PUMP DOCUMENTATION MACHINE IS READY TO WORK WE CAN SHIP MACHINE WORLDWIDE

Condition: good (used), Year of construction: 1996, functionality: fully functional, WE OFFER AN GOOD CONDITION MATSUURA WITH 4 TH AND 5TH AXIS. MACHINE WAS WORKING IN ROLLS ROYCE FROM NEW. AND WAS ALL TIME GREAT MAINTAINED. Description MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP will be present on key and email. WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE 1996 mfg : : MATSUURA mpn MC-800VF Matsuura MC-800VF : ManufacturerMATSUURAModelMC-800VF 3+2 AXIS Year1995 ConditionUsed Brand MATSUURA ControlCNC (Yasnac i80 CNC control) Table1200mm x 400mm Power15 hp Rpm 8000 rpm Atc 30 TaperBT40 Axis3+2 Weight APROX 7000 KG TravelsX = 800mm, Y = 440mm, Z = 485mm Specifications Manufacturer MATSUURA Model MC-800VF 5 AXIS Year 1995 Ksdjvkx Tljpfx Anwsdn Condition Used Brand MATSUURA Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp Rpm 8000 rpm Atc 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG Travels X = 800mm, Y = 440mm, Z = 485mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, WE OFFER AN VERY GOOD CONDITION OKUMA MU 400 VA WITH NEW SPINDEL ON 2022 INCLUDED COMPLETE EQUIPMENT AND FULL TOOLINGS INSIDE TOOLCHANGER. MACHINE Kdjdpfx Ajvmithsnwjn - Okuma MU400VA 5 AXIS CNC Vertical Machining Centre (2006) Description: Main Drive Spindle speed range 15000 RPM Spindle motor power (10min/cont.) 22.5/18.5 kW Tool taper BT40 BIG+ Movement X-Axis Movement 762 mm Y-Axis Movement 460 mm Z-Axis Movement 460 mm 1-AXIS Movement +20/-110 2-AXIS Movement 360 DEGREES Tools Slots in storage 20 Additional Equipment Automatic tool changer cooling through spindle at 30 bar control OSP200 DIMENSIONS AND WEIGHT Measurements width 2500 Measurements depth 2800 Measurements height 2950 Machine weight 7900 kg

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Kdedswcyacopfx Anwjn Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14

Condition: like new (used), Year of construction: 2023, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: IX-GN-4044-S, input voltage: 230 V, working width: 900 mm, total width: 1,000 mm, total length: 2,200 mm, total height: 1,100 mm, air pressure: 6 bar, control voltage: 230 V, ⚙️ Included: • Full conveyor systems • Integrated reject systems ( air reject ) • Stainless steel food-grade construction • Touchscreen control panels 2 off left hand - 3off right hand units , Full production capacity 60-70k per hour ✅ Condition: • Recently removed from production • Fully operational prior to removal • Clean, well-maintained units • Matching set (ideal for line integration or multi-site use) 💡 Ideal For: • Ready meal manufacturers • Meat / poultry processors • Bakery & snack producers • Food contract packers Detects Glass / Plastic / Wood any foreign bodies 📦 Sale Options: • Available individually or as a complete package • Priority given to bulk buyers 🌍 Additional Information: • Available for UK and international buyers • Assistance with loading and logistics can be arranged • Viewing can be organised by appointment 💰 Price: Can be discussed on appointment / via email / phone (Discount available for multi-unit purchase) 📩 Contact: Craig Conway Conways Engineering Ltd Kjdpfx Anjyyl Aqewjdn Please get in touch for: • Additional photos • Full specifications • Video / demonstration • Bulk purchase enquiries Viewings Welcome for full demonstration

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Manufacturer: Sicom, Italy Kodpsy Hgkvsfx Anwedn Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Maximum board size: 1000 x 900 mm Weight: 170 kg Pneumatic supply: 6-8 bar Automatic rivet feeding, material piercing, and mechanism crimping.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection Kedpfevz U Erjx Anwsdn The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: good (used), Year of construction: 2014, feed length X-axis: 1,000 mm, feed length Y-axis: 700 mm, feed length Z-axis: 180 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 180 mm, Selling FIVE working Datron M10 Pro due to relocation, with a 6th M10 Pro for SPARES/REPAIR. Kdodpfx Aneywu Tyewjn 1 x Datron M10 Pro 2018 3kw 40k HSKE25, 2 x 12 tools fixe axis capable linear scale option 1 x Datron 8 Cube 2015 3kw 40k HSKE25, 2 x 12 tools fixe axis capable 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 Spares/Repair ONLY , no spindle, no XYZ servos, no computer. Available for immediate sale. The DATRON M10 Pro is a high-speed CNC milling machine designed for precision and versatility in industrial applications, particularly for the aerospace, medical technology, and electronics industries. Built with a solid granite table for vibration damping and thermal stability, it is engineered for high-speed cutting (HSC) of non-ferrous metals like aluminium, composites, and plastics with a 3.0 kW HF Spindle HSK-E 25.