Used Weiler Fdu 260/28 for sale (7,228)

Condition: ready for operation (used), functionality: fully functional, Distance between centers: 500 mm Center height: 160 mm Rcedeypbypspfx Anked Spindle bore: 36 mm Spindle speed: 56 – 2000 rpm Tailstock: MT 3 Drive power: 2.4 kW Weight: 650 kg Dimensions: 1,400 x 700 x 1,220 mm Digital readout: Optional at extra cost Accessories: Additional accessories available on request!

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg Rcsdjzd Tycspfx Ankod >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: excellent (used), PFAFF 28-9 is a high-quality German sewing machine equipped with a cylinder arm, work table, and motor. This type of construction is ideal for sewing leather goods, bags, suitcases, footwear, upholstery, and other items with unusual shapes. Technical specifications: * Manufacturer: PFAFF * Model: 28-9 * Cylinder arm * Power supply: 380 V Rsdpfxozgf Tme Ankjcd * CONSEW MT-M2 clutch motor * Motor power: 0.37 kW (1/2 HP) * Motor speed: 1425 rpm * Belt drive * Control pedal * Thread stand * Sturdy work table included Condition Used machine, in good visual condition. Condition is visible in the photos. Sold exactly as shown in the photographs. Included: * PFAFF 28-9 sewing machine * Work table * 380 V motor * Control pedal * Items visible in the photos ID: 1081532201

Condition: good (used), functionality: fully functional, Internal article number: 26062 Rcsdpfx Aozfhx Nonkod Lathe Weiler Matador + Multifix "A" base plate + 3-jaw chuck + Collets Center height approx. 150mm Turning diameter over cross slide 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Spindle speed range 30 - 3500 rpm Automatic longitudinal/face feeds Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Rcsdpfx Asvadqzjnked Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the German company Weiler, model Primus. The machine is in very good condition. I can arrange for the machine to be loaded on site. Net price + 23% VAT. Chuck: 120 Turning diameter: 240 Turning diameter over the carriage: 140 Taper in the headstock: MK2 Minimum speed: 150 Maximum speed: 3200 16 spindle speeds Longitudinal and transverse feeds Metric and inch threads Rjdpfozfgcmjx Ankjcd Spindle bore: 24 Right and left jaws Steady rest / chuck jaws

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t Rodpfxszdn S Ho Ankscd dimension machine xH: 4,3 x 2,5 x 1,95 m Oil Country Lathe Special machine for machining long bars and pipes. For sale is an extremely robust and precise WEILER E70 x 2000 heavy-duty lathe, manufactured in Germany to the highest quality standards. The machine is ideally suited for: ·Single-part production ·Repair work ·Toolmaking ·Heavy-duty machining applications in industry The WEILER E70 impresses with its: ·High rigidity and stability ·Large spindle bore capacity ·Excellent torque performance Perfect for machining: ·Large shafts ·Flanges ·Pipes ·Heavy workpieces Tool holder: Multifix size C *

Condition: new, Trainee VCD One of the best-selling and most popular conventional precision lathes impresses with sophisticated technology maximum accuracy long service life tried and tested ergonomics minimum space requirement and a wide range of accessories. Proven for decades in single part and small series production, in trade and industry, training and further education, tool and jig construction. Equipment: Center width 650 mm Center height 160 mm Automatic handwheel disengagement Lead and traction spindle cover Holding brake Toolmaking accuracy according to DIN 8605 Infinitely variable speed control with maintenance-free three-phase asynchronous motor Speed-controlled frequency converter with actual value feedback Speed can be optimized precisely and continuously during machining Best cutting conditions for the finest surfaces in the shortest possible time The numerical position display (optional) offers a high level of operating convenience for working at a constant cutting speed. cutting speed, freely selectable speed limitation, oriented main spindle stop LED machine light Technical data WORKING AREA Center height 160 mm Swing diameter over bed 320 mm Swing diameter over facing slide 190 mm Center width 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 size 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Drive power 60 %/100 % ED - / 6 kW Speed range 30-4,000 (5,000) min-1 Number of speeds infinitely variable FEED RANGE Quantity 24 Longitudinal 0.02 - 0.63 mm/rev Plan 0.006 - 0.2 mm/rev THREAD CUTTING RANGE Metric thread 0.25 - 8* mm Rcodjtznaropfx Ankjd REITSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 Equipped with: -Quick-change tool holder Multi-Suiss size B -18 liter coolant unit incl. coolant pump The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding equipment.

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown Rcedpswa Dz Ejfx Anked

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m Rcodpfxsy Hxp Ds Ankjd cessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets (see photo) Steel Multifix system, size A with 3 quick-change inserts rotating center point chip guard chuck guard fixed steady rest The machine comes from the training workshop of a renowned German corporation.

Condition: good (used), Year of construction: 2006, Switch-on hours (date 18. May 2026): 28.970 h Technical details turning diameter 570 mm turning length 1000 mm control WEILER D3 swing diameter over slide rest 325 mm Swing in gap 600 mm length of gap 140 mm spindle bore 83 mm spindle diameter in front bearing 120 mm face stroke 340 mm longitudinal stroke 1100 mm workpiece weight max. 1200 kg spindle turning speed - stepless 1 - 2500 rpm transmission ratio 2 rapid travel - longitudinal/face 10 / 5 m/min main drive motor (60/100 % ED) 20 / 17 kW tailstock quill diameter 80 mm tailstock quill stroke 200 mm tailstock quill taper MT 5 weight of the machine ca. 3,8 t dimensions of the machine ca. 2,95 x 1,90 x 1,82 m * Control WEILER D3 * Chip conveyor Rcjdszcmccjpfx Anksd * 4-station toolholder PARAT with several inserts * 3-jaw chuck SCHUNK ROTA-S plus 315-92

Condition: new, Rexroth MHD093A-035-NG1-AA 3-Phase Permanent Magnet Motor MNR: R911287322 SN:7260205147266, unused in opened original packaging, 100% functional, scope of delivery as per photos Rcodjtplg Njpfx Anked

Condition: new, Siemens 1FK7032-5AK71-1AHA servomotor SN YFH9628632602001, unused, 100% functional, scope of delivery as per photos. Redpfx Asy Nphvenkocd

Condition: ready for operation (used), Siemens 2KJ3604-5DC22-2HG2-Z helical worm gear motor, serial no.: FDU1605/2312811005, used, in good condition, 100% functional, scope of delivery as per photos, Z see nameplate. Rsdpfxsx Dv Ips Ankecd

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-S4-NN-FW IndraDrive Cs compact frequency converter MNR: R911340084 SN:7260408670599, used, in good condition, 100% functional, scope of delivery as shown in photos. Rcodpfex Et U Ejx Ankod

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) Rcjdpfx Aoxmaktonkod particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - EMERGENCY stop button - Operating instructions

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Rodpfx Answ Sdr Hokecd Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: ready for operation (used), Year of construction: 2003, Machine type CNC turning and milling center Manufacturer WEILER Rsdpfjza Aqwox Ankscd Type DZ 67 / V3 Year of manufacture 2003 Condition Used Control system type CNC Control system Siemens 840 D Location D-64625 Bensheim Turning diameter 220 mm Turning length 450 mm Control system Siemens 840 D Tool turret SAUTER VDI 30 - 12x Tool holders Various VDI 30 Bar feed LNS Quick Load Servo 3 mm Collets Various collets Main drive DC 27 kW Total power consumption 27 + 8.5 + 5 + X kW Machine weight approx. 6.5 t Space requirement approx. 10 x 2 x 2 m Additional information Various accessories - Collets - Chuck jaws - VDI tool holders with and without drive - Documentation

Condition: ready for operation (used), Machine type CNC turning machine Manufacturer WEILER Model UD 24 Year of manufacture Condition Used Control type CNC Control system BOSCH CC 200 Turning diameter 190 mm Turning length 190 mm Control system BOSCH CC 200 Rcsdpfxoza Anpo Anksd Total power consumption 12 kW Machine weight approx. 1.6 t Space requirement approx. 2 (9) x 1.5 x 1.8 m

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Rsdpfx Ajw Rcrcsnkjcd Equipment: 3-jaw chuck Quick-change toolholder system Multifix

Condition: used, WEILER Commodor incl. 3-axis digital readout Heidenhain - 3-axis digital readout / Heidenhain Rsdey Dcppspfx Ankocd - Center height: 180 mm - Swing diameter over bed: 330 mm - Distance between centers: 1000 mm - Spindle bore: 56 mm - Spindle speeds: 25–2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / imperial / module etc. - Multifix toolpost with inserts - Chuck guard - 2x emergency stop - Three-jaw chuck - Chip guarding rear wall - Very well-maintained condition - Machine feet - Documentation Dimensions: LxWxH 2.3x1.2x1.6 m / Weight 1600 kg Errors and omissions excepted.

Condition: new, Year of construction: 2025, - New machine - Precision lathe with automatic cycle control, for chuck and shaft machining. Brand: WEILER | Model: E 120 x 4500 | Year of manufacture: 2025 The precision giant. A powerful and energy-efficient production lathe with optimum accessibility. The machine for heavy workpieces. Maximum cost-effectiveness from turning to milling. Precise and universally applicable, it impresses with: - State-of-the-art control and drive technology - Extremely simple operation and programming - Highest accuracy - Longevity Rsdpfx Ajy Hfy Aenkecd - User-friendly ergonomics TECHNICAL DATA / ACCESSORIES, EQUIPMENT: Control system: Weiler cycle control ONE 1 (Siemens) Working range: - Centre height: 600 mm - Swivel diameter over bed: 1.200 mm - Swivel diameter over cross slide: 830 mm - Centre distance: 4.500 mm Extensive, high-quality equipment. Sales within Germany include a 24-month warranty. No guarantee is given as to the completeness and accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on the equipment available on request.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK Rcsdpfsxq Hhysx Anked quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm total power requirement:2,2 kW weight of the machine ca.:650 kg dimensions of the machine ca.:1700x1000x1700 mm :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 :0,007 - 0,63 mm/U :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 :MK 3 3-jaw chuck:160 mm mm :Typ B Rjdpfxeufud De Ankjcd

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty Rsdpfezcvirox Ankocd – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)