Used Weinig Rf 15 for sale (18,124)

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- The machine renovated and functionally checked ! Short summary: ----- 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ----- Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 Fodpfx Aouzaa Soagoph 1. Tool holder - below ----- Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm Axial adjustment range: 5 mm Rebating device MarathonCoatin for table insert in front of 1st lower tool holder 2. Tool holder - PowerLock - right ----- Motor with brake: 11.0 kW Common motor with left tool holder Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 3. Tool holder - PowerLock - left ----- Motor with brake: Common motor with the 2nd spindle Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 4. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Radial CNC-controlled spindle 5. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max. : 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Spindle axially and radially CNC controlled 6. Tool holder - PowerLock - below ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Max throat depth: 15 mm Axial adjustment range: 35 mm Radial CNC-controlled spindle feed system ----- Frequency-controll...

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Fedsu Su Huepfx Aagoph Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: used, mileage: 1,181 km, power: 110 kW (149.56 HP), first registration: 12/2025, fuel type: electric, overall weight: 4,150 kg, next inspection (TÜV): 04/2027, color: green, gearing type: automatic, number of seats: 3, loading space volume: 3 m³, loading space length: 3,440 mm, loading space width: 1,850 mm, loading space height: 400 mm, Year of construction: 2024, Equipment: ABS, electronic stability program (ESP), FUSO 4 C 15 eCanter TIPPER Scalottini 3.50 m 3-way * New vehicle with day registration * Can be driven with a class B car driving license (applies only to electric vehicles) * Permissible total weight 4.18 t + payload approx. 885 kg * Vehicle number for customer inquiries: 4702 * Electronic Stability Program (ESP) * Electric front windows (2x) * Multifunction steering wheel Fpsdjy Rbg Tjpfx Aageh * Exterior sun visor, transparent * ABS * Front axle stabilizer * Spare wheel holder, double secured * Rear underrun protection * Reversing alarm * Heated mirrors * Signs/labels in German * Environmental badge (green) * Three-seater * Full service history * LED daytime running lights * 2/3 doors No liability for printing or typographical errors Sale only to businesses Subject to changes, prior sale, and errors. The description serves to identify the vehicle and does not constitute a guarantee in terms of sales law. The contract description is binding. * TOP SERVICE + QUALITY * We can provide you with a LEASING-FINANCING-HIRE PURCHASE offer Guarantee insurance possible upon request from the insurer * TÜV / UVV LBW / tachograph inspection and installation of OBU device by our local partners * 30-day export license plates available All export customs documents possible but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * over 200 vehicles in stock at all times

Condition: excellent (used), 15 kW engine Cutting height 7 cm Track width 17 cm Feed rate adjustment Fpjdpey I U T Ijfx Aagjh

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, number of seats: 23, gearing type: automatic, color: white, brakes: retarder, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Equipment: - 23 city bus seats (optionally also high/firm with three-point belts) - 2 + 2 seating - 4 folding seats in the low floor area (count as standing places) - Up to 8 standing places, thus a total capacity of up to 30 PAX - Permissible total weight 6800 kg - Length 7600 mm // Width 2300 mm - Air suspension - Frame construction made of galvanized steel/ stainless steel - Panorama windows tinted black, single glazing (optional double glazing) - Optional panoramic windshield with preparation for destination display (preparation on the side and rear is then also possible) or including installation of Lawo destination displays - Grab bars with straps - Stop request buttons with "Stop" or "Car is stopping" display in the passenger compartment Fpsdpfxoy Iazde Aagjh - USB ports on each row of seats - Optional TFT interior monitor - Complies with Paragraph 30d Paragraph 4 of the StVZO - Further options such as WLAN, video surveillance, custom paint finish, etc. on request Vehicle eligible for subsidies in many federal states. We would be happy to advise you on this. Chassis 515 / optional 517 as follows: Tempmatic front air conditioning, 9-speed automatic, additional hot water heating, cruise control, multifunction steering wheel adjustable in height and inclination, driver's comfort seat (optional driver's suspension seat with seat heating), simple radio (optional MBUX multimedia system 7 inches),... Speed control: cruise control Air conditioning: air conditioning in the passenger compartment and at the driver's seat Safety: ABS * ESP This is a pre-production vehicle This is not in stock. The delivery time is around 4 months when ordering. Price with the above equipment without options from 119,990.00 euros net.

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 16, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 515/517 Front Low-Floor Entry M2 Permissible Gross Weight 5,000 kg / Capacity 19 passengers Optionally available as M3 with up to 6,400 kg / up to 30 passengers Interior conversion as follows: Fsdpsy Rhrisfx Aagjph - Fare collection counter instead of co-driver seat - Double-width electric passenger door with 1,250 mm opening width - Manual wheelchair ramp - 13 city bus seats / sleeper seats optional (can be fixed upon request) - Wheelchair/pram space - 6 standing places (including 3 folding seats) additionally --> Total capacity 19 plus driver (additional standing spaces available on request) - Passenger compartment air conditioning (Webasto 12 kW) plus MB front A/C 7 kW at driver’s area - Convectors heating in passenger compartment (up to behind the last seat row), thermostatically controlled - Length 7,367 mm with original rear twin doors --> longer versions up to 7,500 mm or more available upon request - Double glazing, VIP black, in original cut-outs (optional panoramic glazing available) - Optional extra-large windscreen with electric sun blind and route display preparation - Eligible for funding in most federal states (contact us for details) - Complies with §30d paragraph 4 of the StVZO Base vehicle, e.g., equipped as follows: In standard MB specification with 150 HP (optional 170 HP), incl. comfort driver’s seat (optional air-suspended seat), optional auxiliary heater, front A/C, MB radio, cruise control, 9-speed automatic, optional park package, ... GSR 3 systems included as standard: - Reversing camera - Blind spot assist - Turn assist - MBUX 10-inch (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assist - Starting information assistant - Intelligent speed assist - Distance assist - Rain sensor - Electric exterior mirrors This is a sample vehicle. This model is not in stock. Delivery time is approximately 4 months. Base price without destination displays in above-mentioned configuration from €104,990.00. Net export possible.

Condition: excellent (used), functionality: fully functional, 5-spindles automatic planer with grooved table WEINIG PROFIMAT P 23 E with grooved plane ( removable ) second hand machine n.5 spindles working condition : Excellent CE mark : Yes Fedpezcx A Ijfx Aageph volt. 380/50 grooved plane ( removable ) with tools : Yes , as in photos Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 10 ( Kw 7,5 ) 4° spindle : thickness planer . motor power Hp 7,5 ( Kw 5,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved plane ( removable ) Technical details : forward motor power Hp 4 ( Kw 3 ) spindle rotation speed rpm 6000 feed speed : from 5 to 24 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 lubrication system electric height adjustment set of service keys / documentation

Condition: used, Number of boring spindles 7 St. Working width 160 mm Working height 120 mm Length of the planing table 2.000 mm Feed motor 2,2 kW Weinig PFA 17 N (Unimat) automatic planing and chamfering machine for four-sided planing and profiling of wood, equipped with a universal spindle. Spindle 1: Bottom / 35 mm / 4 kW Spindle 2: Right / 35 mm / 3 kW Fodpfx Aaozb Rffsgjph Spindle 3: Left / 35 mm / 5.5 kW Spindle 4: Right / 35 mm / 7.5 kW Spindle 5: Top / 35 mm / 5.5 kW Spindle 6: Bottom / 35 mm / 4 kW Spindle 7: Universal / 35 mm / 4 kW

Condition: used, Baumüller frequency inverter 55-88 kW, BUM63A-150- removed from Krauss Maffei KM 18 C3 - removed from running machine - fully functionalmanufacturer: Baumüller Nuremberg type: BUM63A-150 Fpsdpsltrpzefx Aagsh spare part no.: 6443081 manufacturer no.: 345449 Dition: gebraucht

Condition: new, mileage: 300 km, power: 167 kW (227.06 HP), fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space length: 7,300 mm, loading space width: 2,460 mm, loading space height: 2,500 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, DAF LF 230 with box body and tail lift 12t ---- Nutzfahrzeuge Göppl GmbH - Authorized DAF Dealer ---- STOCK VEHICLE - AVAILABLE IMMEDIATELY! ---- Production: Chassis 2023 - Body: 2025 Warranty: Plus - Driveline - 3 years - 200,000 km Financing + Maintenance Contract: We are happy to arrange an attractive offer for you, subject to credit approval. Equipment: * Distribution cab * Rubber cab suspension * External sun visor, “green light-permeable” * Halogen headlights * Fog lamps * Green-tinted, heated windows * Adjustable roof spoiler in cab color * Pneumatic steering column lock * Driver’s seat: air-suspended luxury seat * Double passenger bench * Air conditioning * Radio/CD player DAB, 2 speakers * DAF Connect * Adaptive cruise control with FCW and AEBS * Lane departure warning system * PX 7 engine, 167 kW / 227 hp, Euro 6 * Automatic engine idle shutoff: 5 minutes * 8-speed manual gearbox * Rear axle ratio 3.73 * Mechanical differential lock * Suspension: - Front: 4.50t parabolic springs - Rear: 8.5t air suspension * Wheelbase: 5.00 m * Tyres: 245/70R17.5 KMAX Goodyear * Plastic fuel tank 155 liters Fjdpfx Aowx Tynjagsph * AdBlue tank: 30 liters * Pneumatic and electrical connections for trailer, turntable coupling * Trailer electrical connection + EBS 24V / 2x 7-pin * Body connector for tail lift * Generator 100A, batteries 2x 175Ah Body by GÖPPL Fahrzeugbau GmbH Furniture box body * Dimensions (internal): - Length: approx. 7,300 mm - Width: approx. 2,460 mm - Height: approx. 2,500 mm * Side door, rear right * 2-step ladder * GRP roof, translucent * Needle felt lining * Triple-row combination anchor rails, also in side door * Height from floor to center of rail: 600 / 1150 / 1800 mm * LED light strip left and right upper * 24 mm phenolic-coated floor * Skirting/scuff strips on side and front walls, bottom galvanized steel, 270 mm high * Underrun protection galvanized * Palfinger MBB C 1500 kg tail lift, with hand and foot controls * 2x stainless steel toolboxes * Load securing certificate Code XL ----Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg Authorized DAF Dealer - DAF Service Partner - FIAT-Professional Service Partner Errors and interim sale reserved Sale to business customers only.

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment Fodpfx Aozcdz Aoagsph - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6950 Fjdjzcc Axopfx Aagoph TECHNICAL DATA - Max. working width: 220 mm - Max. working height: 130 mm – 4 spindles: 1) Bottom horizontal 220 mm, 5.5 kW 2) Right vertical 130 mm 3) Left vertical 130 mm; (2nd and 3rd spindle) 5.5 kW 4) Top horizontal 220 mm, 5.5 kW - 4 spindles with electric up/down adjustment - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm - 4 powered, toothed feed rollers from above, including 1 double roller - 1 double rubber outfeed roller from above - Bottom rubber outfeed roller - Feed on Kardan shafts - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric thickness adjustment - Infeed table length: 1970 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Fully enclosed cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm, weight: 1700 kg – German production – Not repainted – Used planer in very good condition Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7706 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 5 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm 3) Left vertical: 120 mm (spindles 2 and 3: 7.5 kW) 4) Top horizontal: 220 mm, 5.5 kW 5) Bottom horizontal: 220 mm, 4 kW Fodpozccz Iefx Aagoph - All spindles are adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic pressure rollers - 4 top infeed geared rollers, including 1 twin - 1 top outfeed smooth rubber roller - 1 bottom outfeed rubber roller - Feed driven by Cardan shafts - Stepless feed speed adjustment: 6–36 m/min - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - Equipped with brake - Electric planing thickness adjustment - Central table lubrication - Infeed table length: 1970 mm - Extraction port diameter: 4 x 120 mm, 140 mm - Dimensions (L x W x H): 3450 x 1600 x 1450 mm - Weight: 1112 kg Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate of 4.2 EUR) (Prices may change subject to significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device Fpjdpfxjzccb Ue Aagjh - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: repair required (used), Year of construction: 2010, functionality: not functional, feed rate X-axis: 120 m/min, input frequency: 50 Hz, For sale is a Weinig mechanization system consisting of: Weinig 811, Fedpev Skayofx Aagjph Weinig 820, Weinig 814, Weinig 811, Weinig 806

Condition: excellent (used), Year of construction: 2015, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM Fpodpfx Aezb Ifvjagsh NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: like new (used), functionality: fully functional, Like-new water tank for sale. Fpsdpfxozb Nico Aagjh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, working width: 260 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 160 mm, spindle speed (min.): 7,000 rpm, Weinig Powermat 700 6 spindles 260 mm wide 160 mm high 40 mm spindles 7.000 rpm Feed speed 5-40 m/min Bottom 11.0 KW Right + left motor joint motor 11.0 KW Top 11.0 KW Fjdjzaux Hspfx Aageph Top 7.5 KW Bottom 7.5 KW Radial CNC controlled adjustment and positioning left + top spindles Marathon coating for machine tables and fences (excl. infeed table) 2.5 Meter infeed table Memory Plus operating system

Condition: excellent (used), Year of construction: 1996, grinding length: 240 mm, total width: 240 mm, Weinig Rondamat 925 Year of manufacture: 1996 Maximum tool width: 240 mm Grinding wheel diameter: 150-225 mm Grinding wheel bore: 40 Fedpfx Aaozbz U Djgjph Tool diameter: 100-230 mm

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim Fpsdpfx Aowwwkhsagjh

Condition: excellent (used), working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, total width: 240 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, Weinig Unimat 1000 with grooved table Working width: 240 mm, working height: 160 mm, 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 RPM 2-Right (7.5 kW) 7000 RPM 3-Left (7.5 kW) 7000 RPM 4-Top (7.5 kW) 7000 RPM 5-Bottom (5.5 kW) 7000 RPM Feed rate: 4 kW / 6-36 m/min, one driven roller in the table at the outlet. Fedpozbz Uksfx Aageph

Condition: excellent (used), functionality: unexamined, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, Weinig Profimat 23 E, working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, spindle arrangement: 1 - Bottom - 5.5 kW Fedpfszbz S Nex Aagoph 2 - Right + 3 - Left - 11 kW 4 - Top - 5.5 kW 5 - Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW air cushion in the table One driven roller in the table at the outlet. Includes tooling.

Condition: new, Year of construction: 2026, your benefits Sturdy press mechanism with low-wear, chrome-plated tongs Pressing chamber wear bush Pre-compressor with end-position-sensed cylinder and screwed cover Control box with SPS-control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on stable base frame with rubber feet Briquette quantity monitoring Robust construction, low-maintenance technology, little space requirement: The machines of the C-series are particularly suitable for small and medium-size enterprises, whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, e.g. wood, polystyrene, foam, paper or biomass. Fpedpfxocnz U Ej Aagjh All machines are available as left- or right-hand version. The mounting on a stable base frame ensures a quick installation and makes mobile use possible. Briquette diameter (mm) 50 Throughput capacity up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5,5o Screw motor (kW) 0,55 Oil quantity (litres) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: temperature-controlled hydraulic unit, complete valve control, pump motor for long running times Briquette length monitoring: regulates the length of the briquette to a constant level Pressing area wear bush: Prevents wear in the pressing area Location: Ex works - free loading

Condition: used, Year of construction: 2021, Amazone Grasshopper GHS 1500 Drive flail mower! / EX DEMO, demonstration unit! ----* Manufacturer: Amazone * Type: Grasshopper GHS 1500 Drive * Year of manufacture: 2021 * Good condition * Includes new replacement blades Fodpfx Aaoza N Dqogeph * Includes PTO shaft * Includes control unit * Basic weight: 1,030 kg * Price: 15,900 euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp *All information is subject to change without notice. Errors and prior sale excepted.*

Condition: used, Year of construction: 2006, total width: 4,600 mm, total height: 1,830 mm, Dimensions (LxBxH): 217 x 460 x 183 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 40 Fedpfxswnig No Aageph - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels