Used Wmw Bkoe 450 X 800 for sale (67,222)

Condition: good (used), Year of construction: 1981, functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 4,000 mm, grinding wheel diameter: 750 mm, total width: 4,180 mm, total length: 13,440 mm, total height: 2,455 mm, grinding diameter: 800 mm, overall weight: 38,700 kg, STANKO 3M196 roller grinder. Year of manufacture 1981. Max. grinding diameter 800 mm, Max. length of ground workpiece 4000 mm, Range of grinding diameters 80 - 800 mm, Max. grinding diameter without support 800 mm, Max. grinding diameter in support 450 mm, Guodpjt I Dppofx Aqgjh Elevation of the tusk above the table 410 mm, Max. weight of ground workpiece in the tusk 10000 kg, Grinding wheel dimensions ⌀750 x 100 mm, Grinding speed 50 m/s, Main motor power 30 kW, Product speed 5 - 80 rpm, Max. travel of tailstock tusk pins 100 mm, Overall dimensions of the grinder (Length x Width x Height ): 13440 × 4180 × 2455 mm, Weight of the grinder 38700 kg,

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Gsdpfx Aqeyvt H Aogjuh Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Condition: used, Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible. Guedpozulg Njfx Aqgjh

Condition: new, table length 1300 mm table width 800 mm table height 920 - 1000 mm 1000 kg height of stroke 510 - 1550 mm total connected load 1,5 kW connected load frequency 230 V weight of the machine ca. 0,55 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Guedpfx Aqsvn U Exsgjh Side panels 150 x 10mm Ribbed bottom for reinforcement.

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Godpfx Aqou Av E Hsgeuh

Condition: used, Technical details: table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Gedpsu N D Ayjfx Aqgsuh Foot clamping 16mm (6 holes) *

Condition: used, Year of construction: 2024, EMOD FHKFIE3 450L/6C Industrial Electric Motor – 800 kW Heavy-duty industrial electric motor suitable for variable speed/frequency converter applications. Technical specifications: Manufacturer: EMOD Type: FHKFIE3 450L/6C Motor No.: 8830664 Year: 2024 Rated power: 800 kW Rated voltage: 660 V Δ Rated frequency: 50 Hz Rated speed: 995 rpm Rated current: 850 A Power factor: cos φ 0.85 Efficiency class: IE3 Efficiency: 95.8% Protection class: IP55 Duty cycle: S1 Weight: 6,600 kg Standard: EN 60034 Godpfjz Dh Rmjx Aqgouh Temperature monitoring: PT100 Variable speed operation: 5 Hz – 99 rpm 50 Hz – 995 rpm 90 Hz – 1,790 rpm Frequency range: 5–90 Hz Equipped with a separate forced ventilation motor: EMOD FHEIE3 FOL100LA/4 3.0 kW 400 V 50 Hz 1,445 rpm IP55 The motor is industrial surplus and is offered in its present condition. Sold as-is, without warranty, and without the possibility of claims.

Condition: good (used), Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney Gsdpfjdf U Sysx Aqgeuh -Surface: scraped -Material: cast -Dimensions measuring chimney: 450 x 450 x 3005 mm -Wall thickness: 30/80 mm -Holes: Ø 52 mm -Dimensions base plate: 1080 x 1080 mm -Transport dimensions box one: 3310/645/H770 mm -Transport dimensions box two: 1160/1080/H350 mm -Weight: 1190 kg

Condition: used, Year of construction: 1980, Technical details: rpm spindle (continous): 2000 - 2500 U/min double strokes/min.: 25; 37; 50; 75; 100 H/min. Grinding-wheel diameter: Ø 250 mm work height max.: 1350 mm total power requirement: 2,7 kW weight of the machine ca.: 1,0 t dimension machine xH: 0,85 x 1,0 x 1,8 m Use for medium to larger metal circular saws from 250 - 1450mm. Saw blade attachment Ø 60 to Ø 80mm and shaft Ø 31,5mm Godpeu Ng I Ejfx Aqgeuh Tooth pitch up to 42mm Tooth depth adjustment via scale Front cutting tooth: can be chamfered on both sides up to 45° and overcut at pitch 0.02mm *

Condition: used, Technical details: width: 410 mm depth: 450 mm height: 985 mm weight of the machine ca.: 320 kg Gsdpfx Aqsu S Hubsgsuh 1 piece T-slot to DIN 650: T-slot width a=28; h= 42; b= 47; c= 19.5 mm, T-slot spacing 160 mm Foot clamping with slotted hole Ø 22 x 300 mm *

Condition: used, self-centering drag gear (5146) Manufacturer: WMW Max. 2800 RPM. Gsdpfxjdb Uzxs Aqgeuh

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Gsdovbh N Ropfx Aqgjuh Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW Gedpsu Nfv Uofx Aqgeuh weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 315 mm workpiece height: 390/455 mm feed: quer: 0,3-3,5 mm table adjustment: längs 1150 mm table speed: 2,5-25 m/min Table dimensions: 2120 x 600 mm magnetic plate size: 1000 x 315 x 100 mm table surface area: 1160 x 315 mm feed of spindle: 0,002 - 0,05 mm distance table - spindle center: max. 550 mm throat of the spindle nose: 200-580 mm grinding spindle speed: 1500 / 3000 U/min Guedpfx Asu Nggzoqgsh total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 1,3x1,4x1,95 m dimension coolant device LxWxH: 0,7x0,7x0,55 m - coolant device (Tank with pumps) - 2 pieces grinding disc intakes - 4 pieces machine base i.D. *

Condition: new, table length 1200 mm table width 800 mm 28 mm table height 450 - 800 mm 500 kg Gujdpfx Aqoh Dqb Sogeh weight of the machine ca. 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement.

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 315 mm turning diameter over support: 200 mm turning length: 500 mm turning diameter over bed: 315 mm swing diameter over face slide: 200 mm center height measured in bed: 180 mm spindle passage: Ø 32 mm range of revolution per miute: 56...2.800 / nur only 6 step links-rechts U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Workpiece pick-up via collet chuck -travels longitudinal slide= 580mm and cross slide=170mm -incl. tooling device lathe support -incl. change gears -steady rest Ø 100mm -fourfold tool holder The machines functionality is limited ! 6 speeds are currently selectable! (224/1800 ; 280/2240; 355/2800 rpm.) i.D. * Guodpfou Ix Hqjx Aqgeh

Condition: new, table length 1200 mm table width 800 mm table height 840 - 890 mm weight of the machine ca. 0,3 t Welding table / perforated table: Godpfx Ajih D Apsqgsuh Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: excellent (used), max. workpiece diameter 400 mm threading length 1000 mm max. module 4 (8) min. module 1 clamping length max. 850 mm weight of the machine ca. 3,1 t Guedpfx Aqozmapiegoh dimensions of the machine ca. 3,1 x 1,1 x 1,6 m

Condition: used, Year of construction: 2004, Technical details: table length: 4000 mm table width: 2000 mm Max. sheet thickness: 100 mm table height over floor: ca. 860 mm Guedpfx Aqsu Nkxuogjh total wight: 5,6 + 0,5 t dimensions LxWxH: 4,0 x 2,2 x 0,1 m Welding table / Pricing 0.50 EUR/kg with substructure and 6 base stands *

Condition: used, Year of construction: 1991, -1- used deflection roller/drive roller, drum length approx. 1250 mm, drum diameter approx. 800 mm, total shaft length approx. 2000 mm, shaft diameter approx. 123 mm, year not known to us. Both bearings can be turned easily. Price EXW Gusdewqfz Ujpfx Aqgoh

Condition: excellent (used), Gear, cogs, gear shaft -Gear shaft: helical -Diameter: Ø 127 mm -Tooth width: 83 mm Guedpfeh Ra Hgjx Aqgsh -Dimensions: see photo techn. drawing -Total dimensions: Ø 127 x 450 mm -Weight: 25.5 kg

Condition: like new (used), Year of construction: 2019, 2 pieces unused toggle plates for Weserhütte 1000 x 800 double toggle jaw crusher, price per piece Gedpfx Aqjy Au Rcsgeuh

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, The machine tool undergone a general overhaul, which included the repair of the mechanical part, the electrical part and the derivation of the geometry in accordance with the Technical Acceptance Conditions (WOT) and EN. The machine is adapted to the minimum requirements for occupational health and safety requirements. Basic technical data: table working area: 400x1600 mm spindle taper: ISO 50 Godpfx Aqourvl Rsgjuh longitudinal travel: manual/mechanical 1150/1120 mm cross travel: manual/mechanical 370/345 mm vertical travel: manual/mechanical 430/400 mm maximum angle of rotation of the vertical head: +/- 45 stopni spindle speed range: the smallest 28 rpm, the largest 1400 rpm main motor: 11 kW The milling machine has a mechanical tool clamp that allows the operator to automatically clamp the tools in the machine. The machine has been equipped with a central lubrication system and optical rulers (optical scales) for digital reading of the position in 3 axes. Machine is ready for inspection in central Poland.

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available Guedpfx Ajh R D Rdoqgoh -Dimensions box: 1160/480/H250 mm -Weight: 112kg

Condition: good (used), Frame width: 1,170 / Height: 900 mm / Frame depth: 800 mm Included in delivery: 02x workbench stand, used material color: blue frame profile: 85 mm stand height: 900 mm stand depth: 800 mm incl. cross and diagonal braces, foot plates Guodpemrr Agsfx Aqgeh The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: yellow box profile: 80 x 50 mm clear width: 1.000 mm 08x safety pins, used execution: completely galvanized