Used Workshop Heating for sale (20,423)

Condition: used, Year of construction: 2013, functionality: fully functional, 2 units available, including silencer and gas control unit. Pgsdpfx Aez D S Ngoi Tou

Condition: good (used), Year of construction: 2003, Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler for screw compressor, compressor, stationary air compressor, plate heat exchanger -Manufacturer: Kaeser, plate heat exchanger heat recovery for Kaeser screw compressors -Type: PTG 141-281 -Volume flow rate: 1.48 m³/min Technical data: see photo of the nameplate -Number: 2x heat exchangers available Price: per piece -Dimensions: 810/385/H660 mm Podpfx Ajz D T Tysi Togu -Weight: 93 kg/unit

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas Pgedpfx Aijz Hngms Teu • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, functionality: fully functional, mileage: 95,077 km, power: 130 kW (176.75 HP), first registration: 12/2003, empty load weight: 7,040 kg, overall weight: 9,500 kg, color: blue, gearing type: mechanical, Year of construction: 2003, operating hours: 1,843 h, Equipment: air conditioning, This 177 hp UNIMOG is ideal for conversion into a motorhome. The rear cabin is well-suited as a base for a living cabin. A roof rack provides additional storage space. The existing winch can be used as a self-recovery winch. 1 used UNIMOG 4000 • Internal number 3797 • First registration: 12/2003 • Mileage: approx. 95,077 km • Operating hours: approx. 1,843 • Power: 130 kW/177 hp • Unladen weight: 7,040 kg • Gross vehicle weight: 9,500 kg • Walk-in workshop container body • Towing capacity: 5 tons • Front winch • Electrical system: 24 V Podpfx Aisz Dgnde Tjgu • Hydraulics: single-circuit (open circuit) • Auxiliary gearbox with work group Offer is subject to change. Errors and omissions excepted.

Condition: new, Technical data: Capacity: 100 t Installation height: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Forward speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Pgedok Nz N Espfx Ai Tsu Height: 2450 mm Weight, approx.: 1000 kg Features: - Cylinder with lateral adjustment - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at an extra charge.

Condition: refurbished (used), heating capacity: 400 kW (543.85 HP), space requirement length: 4,500 mm, space requirement height: 3,300 mm, space requirement width: 1,400 mm, Warranty on heat exchanger + refractory lining Boiler (heat exchanger + refractory lining renewed) Stoker screw Backfire damper Secondary air blower Pedperp Dvgefx Ai Togu Primary air blower Flue gas blower Hydraulic unit with cylinder Flue gas pipes ( new ) Multicyclone ( New ) Electrical cabinet computer Complete documentation / operating instructions

Condition: new, pressing force: 100 t, stroke length: 400 mm, overall weight: 3,000 kg, - Capacity 100 tons - Cylinder stroke 400 mm - Table size 1000 x 1500 mm - Bridge can be moved electrically - Cylinder can be moved to the left and right - Electrically or manually operated - pressure gauge Pgedpfx Aijucprwo Tsu - Emergency stop - Documentation - 400V

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market Pjdpfx Aisp Dt Uuo Tjgu - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Condition: new, Electrically heated conveyor furnace Pgodegvmg Hepfx Ai Teu

Condition: like new (used), Ling Systems Stainless heat shrink tunnel stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control Pgsdped I Ncbefx Ai Teu

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 308.3 kW (419.17 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,899 kg, input voltage: 400 V, total width: 2,200 mm, total length: 4,600 mm, total height: 2,650 mm, warranty duration: 12 months, heating capacity: 333 kW (452.75 HP), Aircooled chiller/Heat pump Systemair SYSCROLL.330.AIR 308.3/333 kW Cooling capacity: 308,3 kW (12/7 — 35°C) Heating capacity: 333 kW (40/45 —7°C) Year of manufacture: 2018 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Copeland (scroll) Number of fans: 8 pcs. Type of refrigerant: R410A Dimensions: 4.6 x 2.2 x 2.65 m Weight: 2899 kg Condition: Excellent, Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Pedpfx Aijxxkfls Tjgu The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, manufactured in 2018, hot water system, output 550 kW, underfeed firing with a moving grate, including pneumatic cleaning, including infeed auger with backfire protection, including multi-cyclone separator mounted directly on the heat exchanger, including ash removal with an auger, including control system, the system is fully functional! Including electrostatic precipitator, brand Meister, matched to the system, including ash removal for the electrostatic precipitator, including control system for the electrostatic precipitator, including flue gas fan. The system is being sold due to connection to a district heating network. Pjdovgf Ibepfx Ai Togu Dismantling can be included as part of the offer.

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Pedpoz D Ihfsfx Ai Togu

Condition: used, Memmert B60 Incubator For sale is a used incubator, model B60, manufactured by Memmert. Technical details: - Manufacturer: Memmert - Model: B60 - Type: Incubator / Heating cabinet - Temperature range: approx. +10 °C above room temperature up to 70 °C - Power: approx. 2000 W (220 V / 50-60 Hz) - Application area: Laboratory, research, industry, medicine - Condition: Used, fully functional - Internal dimensions: L: 50 cm, W: 100 cm, H: 80 cm Pgedpfx Ajxlq Nkoi Tju Buy Memmert B60 incubators and other items at affordable prices – Buy from the professional for the professional – You will find more attractive offers in our shop.

Condition: used, Year of construction: 2016, 2 identical thermal oil boilers for industrial process heat supply are offered. Equipped with: attached burner system, thermal oil piping connections, circulation/pump components, valves and monitoring devices, insulated piping, stainless steel cladding, integrated viewing/inspection area at the boiler front. Inspection possible by appointment. Pgsdpfx Aiez Ibx Ss Teu

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 13.5 kW (18.35 HP), type of input current: three-phase, type of cooling: air, overall weight: 150 kg, input voltage: 400 V, total width: 920 mm, total length: 430 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 15.3 kW (20.80 HP), Aircooled chiller/Heat pump CLIMAVENETA MEHP IB G07 15Y 13.5 kW/15.3 kW Cooling capacity: 13.5 kW / 3.84 tons (12/7 — 35°C) Heating capacity: 15.3 kW / 4.35 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB28FCQMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-10-F02, expansion vessel. Dimensions: 0.43x0.92x1.4 m Weight: 150 kg Working hours: 83 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Pgodpfjyxfc Isx Ai Tsu WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tools from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident lighting via LED ring light; 4 sectors and 1 ring individually switchable Precision measuring stage (X and Y axes) Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow toggle Camera-based measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and handy – high performance Pgedpfx Aozpwd Nei Teu Rapid operation with maximum measurement precision Special features Incl. Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels particularly with stamped parts, plastic and rubber components, milled parts, tools, profiles, and PCBs. Key highlights of the measuring microscope include camera-based measurement data acquisition, rapid operation, and high precision. Another notable feature is the precise edge detection in transmitted and incident light using smart image processing algorithms. Despite its high performance, the WM 1 300 CNC is compact and handy, measuring 900 mm × 950 mm × 950 mm. Please feel free to contact us if you have any further questions!

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Pgsdpfx Aiszxclde Tju Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking

Condition: used, smoke pipe connection diameter: 200 mm, nominal heat output: 55 kW (74.78 HP), Offering a used HDG heating boiler with a heating capacity of 55 kW for collection. The boiler was manufactured in 1995 and is in excellent working condition. Pjdpezxf Hwefx Ai Tsgu It can accommodate logs up to half a meter in length.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 306 kW (416.04 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,500 kg, input voltage: 400 V, total width: 950 mm, total length: 3,400 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 340 kW (462.27 HP), Watercooled chiller/Heat pump Climaveneta NX WN 1004 306 kW/340 kW Pjdpezw Axbjfx Ai Tegu Cooling capacity: 306 kW / 87.01 tons (12/7 — 35°C) Heating capacity: 340 kW / 96.68 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Kiplink Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZP295KCE-TWD-522 (scroll) Type of refrigerant: R410a Hydraulic module: 2 pcs. water pump Grundfos TPED 80-210/2 Dimensions: 3.4x0.95x2 m Weight: 1500 kg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: like new (used), functionality: fully functional, HOT PRESS with electric heating of plates , model ORMAMACCHINE NPC/E/DIGIT6/90 second hand machine working condition: excellent for wood, corian, joinery, furniture, custom furnishings, panels, doors, composite materials, and more maximum temperature: 140°C CE-certified machine plate dimensions: mm. 2500 x 1300 electric plate heating n.6 pistons, diameter: mm.70 opening: mm.400 total thrust: 90 tons automatic opening with timer pressure: 3.3 kg/cm2 n.4 racks for smooth movement of the lower plate hydraulic motor power : Hp 2 electric plates: Kw 17,8 overall dimensions: 3300 x 1550 x 1900 mm weight: 2800 kg volts 400/50 total installed electrical power Kw 22,5 ability to set separate temperatures for the plates Pgedpfjzwphpjx Ai Tsu daily programming for automatic turning on the machine heating the plates are composed of a chipboard support and a 12 mm thick aluminum plate containing the heating elements. the Digit series is equipped with an electronic control panel for managing the pressing parameters (temperature, pressure, and closing time)

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Parts Washer The AURORA MP150 pressure parts washer is a compact workshop cleaning machine designed for cleaning mechanical parts, tools, and components. The enclosed working cabinet helps reduce liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other stubborn contaminants. The parts washer uses a closed-loop cleaning solution system, allowing the cleaning fluid to be reused during ongoing work. The dual-function pneumatic gun enables both cleaning with a mixture of cleaning solution and compressed air and subsequent blow-off and drying of cleaned components. AURORA MP150 Workshop Parts Washer – Key Advantages 5–8 bar operating pressure – effectively removes oil, grease, carbon deposits, and other contaminants, including from hard-to-reach areas. Dual-function pneumatic gun – enables cleaning with cleaning solution and compressed air, as well as blow-off cleaning using compressed air alone. Closed-loop cleaning solution system – helps reduce cleaning agent consumption during regular operation. Working cabinet lighting – provides better visibility of cleaned surfaces, openings, and hard-to-reach areas. Integrated work gloves – make it easier to handle components without opening the cabinet. Lid support cylinders – make opening and closing the working chamber easier. Cabinet ventilation – supports air circulation while the machine is operating. Compact benchtop design – the parts washer can be placed on a stable and sufficiently strong table or workbench. Parts Cleaning Concentrate Included Pgedpfx Aisztwg Sj Tju The MP150 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer with Dual-Function Pneumatic Gun The AURORA MP150 is equipped with a pneumatic gun featuring two operating modes, allowing a single device to perform both thorough cleaning and blow-off drying of components. In cleaning mode, a mixture of cleaning solution and compressed air is discharged from the nozzle. The pressurized stream helps remove contaminants from openings, channels, recesses, and surfaces with complex shapes. After cleaning, the gun can be switched to blow-off mode. Compressed air removes residual cleaning solution from surfaces and hard-to-reach areas, making it easier to prepare components for further use, inspection, repair, or assembly. The AURORA MP150 Parts Washer Comes as Standard With Dual-function pneumatic gun Integrated work gloves Interior cabinet lighting Ventilation system Lid support cylinders Compressed air supply adjustment 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 150 l Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun Dual-function pneumatic Cabinet lighting Yes Ventilation Yes

Condition: used, Year of construction: 2021, type of input current: three-phase, input current: 120 A, input voltage: 400 V, We offer this used Chiossi & Cavazzuti Tetris 6M 1900 drying tunnel with a 6-meter heating section, manufactured in 2021. Pgjdpfx Aoztplmji Tju Power: 72 kW Phases: 3P+PE Current: 120 A Voltage: 400 V Frequency: 50/60 Hz Weight: 2500 kg Serial number: 2637 Product code: 1390081 Year of manufacture: 2021 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, A used Hanagata Heat Shrink Tunnel - compact size Pgodpfxsyz Uzxe Ai Tsu

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Psdpfxsy U U Tus Ai Tegu Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.