Used Wp Haton V 500 for sale (46,353)

Condition: new, Type: S 500 l 2P-V Complete stainless steel Hopper capacity 500 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5.6 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 160 Lenght: 95 Height: 142 Lodpfohd U R Ujx Agtehk Delivery time: after advanced payment, one working day

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Lhedsxdxhrjpfx Agtek Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm Lhjdpfxezrpqto Agtjk drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 with oil-hydraulic drive, hydraulic drawing cushion in table and ram

Condition: used, Year of construction: 2002, x-travel 500 mm y-travel 500 mm Lsdpozgimkjfx Agtohk z-travel 500 mm weight of the machine ca. 3800 kg

Condition: good (used), Block DTT 10000 Transformer Ledpfx Aexl Tbvegtehk Manufacturer: Block Type: DTT 10000 10000 VA 50-60 Hz Switching Rating: Dyn 5 Code: 9129 IP: 23 Primary: 500 V 12 A Secondary: 399/231 V 380/220 V 361/209 V 15.15 A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 1997, machine/vehicle number: 972842, SECOND-HAND SEMIAUTOMATIC CROSS CUTTING SAW TRV 500 - CE RULES - Mobile pressure system - Right/left feeding Ljdpfx Aewr T Rmsgtohk - Conveyor belt TSLR 6000X400 - N. 3 unloading tables mm. 1000x1200 - Waste belt conveyor TSS 45° mm. 2500 - Strapping machine SIVARON SS-80 - Year 1997

Condition: new, Year of construction: 2020, 🔧 Technical data: Manufacturer: ABB AG, Transformatoren – Brilon, Germany Type: RESIBLOC Model/Cat. No.: 14220171120–02 Year of manufacture: 2020 ⚡ Electrical parameters: Rated power: 11,000 / 5,500 / 5,500 kVA Rated voltages: High voltage: 11,000 V Low voltage: 5,500 V or 2,020 V Rated current: 577.4 A / 1,688 A / 1,678 A Frequency: 60 Hz Connection system: D(+(7.5°))yn11d0 Lhsdpjwcuifsfx Agtjk Impedance (Z): 11,000 V: 11.74% 5 500 V: 10.44% 2 020 V: 10.22% 🌡️ Additional specification: Cooling system: AFWF (forced air + water) Protection class: IP44 Insulation class: F / F / F (HV/LV) Winding material: Aluminum Short-circuit resistance: Up to 18.5 kA / max. 2 seconds Insulation level: HV: LI 75 / AC 28 LV: LI 40 / AC 10 Environmental and fire class: E2 / C2 / F1 Ambient temperature (max): 45°C Total weight: 15.3 t NEW - UNUSED I have 5 pieces

Condition: excellent (used), Year of construction: 2011, Engel Victory 500/80 Tech / Production Line with Engel Viper 12 Robot Year of manufacture: 2011 Lsdpfx Aszc Ngksgtshk Injection Unit: Screw diameter: 45 mm Shot weight: approx. 295 g Injection pressure: 1,598 bar Dosage volume: 318 cc Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface 3x hydraulic core pull Injection unit hardened - bimetallic Robot Engel Viper 12 Year of manufacture: 2014 5-axis robot: 4 axes driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Robot available for purchase at additional cost Dimensions: Weight: 5,300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pump/motor: 15 kW All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 1986, overall weight: 6,500 kg, power: 42 kW (57.10 HP), input voltage: 380 V, broaching length: 1,600 mm, number of broaching positions: 1, workpiece diameter (max.): 500 mm, Manufacturer: Varinelli Milano Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500kg Mach. No.: 3269 General / technical data: Vertical hydraulic internal broaching machine with one broaching station Ledpfx Agjwqmaxstohk Pulling force: 25,000 kg Broaching stroke: 1,600mm Broaching stations: 1 piece! Passage width between the cylinders: max. 540mm Cutting speed: hydraulically stepless adjustable from 1 m/min up to max. 8 m/min Return speed: hydraulically stepless adjustable up to max. 18 m/min Required space for the machine: see image of machine layout plan Power supply / connection value: 380 Volts 50 Hz / 42 kW Accessories / special equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-mechanical locking (DIN 1417) in the pulling bridge. The tool feeder system is hydraulically-mechanically locked. The machine has a coolant system with integrated chip conveyor for installation in a pit. Remarks: The machine is still in its original paint. It is designed for use in mass production for medium and large batches; for optimal use, a foundation (pit) is ideally required. Pulling heads and needle pushers are available on request. The machine can be inspected at our warehouse. General information We constantly have a large selection of about 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg in horizontal as well as vertical design in stock. A large part of the broaching machines in stock is ready for demonstration and inspection. If required, we can offer you used equipment such as pulling heads, needle pushers, broaching tools, and other specific accessories. We are also a contract broaching company and can assist you with technical questions from 50 years of experience in broaching technology.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 32,000 h, Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment. Lodpfx Agjy Ax T Uetjhk

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Lhedpjw E Igvsfx Agtsk Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: like new (used), Year of construction: 2021, Offered is a double spindle pick up turning machine VSC 500 DUO. The machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The machine can be equipped with various periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens 840 Dsl TECHNICAL DATA workpiece diameter: max. 440 mm workpiece height: max. 250 mm chuck diameter: 450 mm swing diameter: 550 mm X-stroke: 925 mm Z-stroke: 400 mm Lhsdpfx Ajt Du Tdsgtok TOOL CARRIER 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time and equipment of the machine on request.

Condition: good (used), mileage: 782,543 km, first registration: 02/1992, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, total length: 5,900 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1992, = Further Options and Accessories = - Aluminum fuel tank - Leaf suspension - Air suspension - Sleeper cab - Sun visor = Remarks = Volvo F16.500 Globetrotter 4x2 – Fully renovated – Volvo Demo colors – New paint – Perfect condition Year: 28-02-1992 Mileage: 782,543 km VIN: YV2H3A6A8NA369308 Registration: 76-BTB-7 Volvo in perfect condition New paint – Volvo Demo colors Interior like new Air suspension 3.60 m wheelbase Telma retarder Cruise control Double bed Electric windows Air horn Additional lights Visit our website for all photos and details: = Further Information = Technical Information Number of cylinders: 6 Engine capacity: 16,115 cc Transmission: Volvo manual gearbox Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Tire tread left: 70%; Tire tread right: 70%; Suspension: Leaf spring Rear axle: Tire size: 295/80R22.5; Dual-mounted; Max. axle load: 11,500 kg; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Air suspension Weights Lsdpfeuxyc Ijx Agtehk Unladen weight: 8,000 kg Payload: 11,000 kg Gross vehicle weight: 19,000 kg Functional Body manufacturer: Volvo Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Identification License plate: 76-BTB-7

Condition: used, GEA CFS CMV CutMaster Vacuum 500 Cutter The CMV500 Vacuum CutMaster is an advanced industrial cutting and mixing machine widely used in the food processing industry. This cutter is ideal for processing meat, game, fish, poultry, vegetables, fruit, vegetarian products, pet food, and cheese. Thanks to its powerful performance and efficient operation, it is perfectly suited for large-scale production of finely chopped and mixed products. The machine is equipped with a variable knife speed control, which can be adjusted according to the type of product, a vacuum system (for use with an external vacuum pump), and a 200 L standard trolley lift with ejector. The machine is fully manufactured from durable stainless steel and is designed for intensive industrial use and easy cleaning. Specifications: - Bowl capacity: 500 L - Knife speed, frequency controlled: 50–3600 rpm (144 m/s) - Number of bowl speeds: 2 - Vacuum system (external vacuum pump not included) - Equipped with a 200 L standard trolley lift - Equipped with an ejector - Voltage: 400 V (3 + N, 50 Hz) - Power: 172 kW - Weight: 7000 kg - Year of manufacture: 2007 - Machine dimensions (W × D × H): 3350 × 2960 × 1790 mm Lhsdpfxezfzxpo Agtsk

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: DN3400, 1x Abus VS pillar slewing crane, model NL 500 KG Load capacity at full extension: 500 KG / 0.5 tons Height: approx. 3.6 m, upper arm length: approx. 3.4 m Reach: approx. 2.5 m, hook height: approx. 3 m Total weight: approx. 450 kg Ljdpfx Agozvrl Istohk Includes Abus chain hoist (year of manufacture 2019) with floor control (2 lifting speeds) with slewing and trolley drive Connection: 400V, 16A, slewing range: 360° Crane is dismantled and immediately available Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold. Very good condition, almost like new. See pictures. Shipping via freight forwarder or collection by appointment.

Condition: excellent (used), Year of construction: 2011, Ref: 11100 . 2011 Duplo DPB-500 EVA Perfect Binder Excellent condition! Only 40,000 books on the counter! Single clamp solo binder designed for the digital book-on-demand market with operation by one person. Features: • EVA spine glue unit • Programmable pre-melter • Computerised set-up with icon based touch-screen • Automatic setting of clamp book thickness and cover scoring Lodpfx Agjy Nzclstehk • Double/Out of cover detector • Light beam score positioning • Milling & roughing unit with dust bag extraction • Internal vertical stacking tray delivery Specification: Book thickness: Min 1mm / Max 51mm + cover thickness Book size (spine × fore-edge): Max 360mm × 320mm Min 120 × 120mm Cover size: Max 360 × 696mm / Min 120 × 250mm Cover weight: 80-302gsm Cover Pile height: 70mm Mechanical speed: Max: 525 /hour

Condition: used, Year of construction: 1975, Manufacturer : Oskar Krieger Maschinen Model: Fondo Mat Universal 500 Year : 1975 Type: Melter / process vessel   Classification: ATEX Up/down: hydraulic unit Mixing head rotation: manual Ledpfxex R Dbte Agtjhk Stainless steel coil: liquid and/or steam Mixing: 705 rpm Vacuum and pressure tight lid : -1 / +1 bar Maximum temperature: 140°C diameter of filling port: DN200   Vessel : total capacity: 700L useful capacity: 500L capacity up to tank rim: 615 L pressure: -1 / 3 bar temperature: 130°C recommended drain valve size: DN40   Jacketed : capacity: 68 L pressure: 6 bar temperature: 160°C insulation thickness: 45mm   Weight: 1520 kg Can be combined with the following equipment: / Technical documentation available.    

Condition: new, Year of construction: 2024, Safety glass window for a Gildemeister CTX Beta 500 V4, item in original packaging, unused and new. Ljdpfxsyx U Sls Agtehk

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table load: 300 kg, overall weight: 11,000 kg, spindle speed (max.): 3,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS I 500 was manufactured in 2006. It features an X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine includes a tool magazine capacity of 60 tools and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality milling capabilities, consider the Mazak VARIAXIS I 500 vertical machining centre we have for sale. Contact us for further details. • A: -120° / +30° • C: 360°Table • Dimensions: 500 × 400 mm • Number of tables/pallets: 2 • Spindle nose to horizontal table: 190–650 mm • Spindle nose to vertical table: 140–600 mmSpindle • Max torque: 252 NmTool magazine / ATC • Automatic tool changer: YesControl and software functions • Automatic pecking cycle with load detection • Synchronized tapping • EIA Dynamic Compensation 2 • Two additional M-code functions • G00 slope constant • High-speed function • MAZACC-3D high-speed software package • Shape compensation for rotary axes Additional equipment • Pallet changer (two pallets/tables) • Belt-type chip conveyor • Chip conveyor preparation with chip pan Lhodpozpygajfx Agtek • High-pressure coolant through spindle system (stated as 15 kg)

Condition: excellent (used), Year of construction: 2018, Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: Witt & Sohn, Mushroom head hood type PK wd 500 x-schw. VZ -Hood opening: mechanically lockable, handwheel -Bolt circle Ø 550 x 12 mm -Quantity: 2x hoods available -Price: per piece -Overall dimensions: Ø 905 x 820 mm -Weight: 89 kg/unit Ljdoh Ig R Uspfx Agtehk

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM Lhjdpfx Agjyn Dy Njtjk After capital renovation 3 months warranty for parts

Condition: used, Year of construction: 2021, Eillert MSD-500 VAR Vegetable Centrifuge This Eillert MSD-500 VAR vegetable centrifuge is in truly as-new condition and has seen very limited use. Designed for efficient drying of washed vegetables and leafy products, the machine features a variable speed drive, user-friendly digital controls, and a hygienic stainless steel construction. Ideal for fresh-cut processors, vegetable growers, packers, and salad producers looking for a reliable and compact drying solution. Key Features - Variable speed control (VAR version) - Stainless steel hygienic construction - Digital control panel - Emergency stop button - Supplied with multiple centrifuge baskets - Compact footprint - Easy cleaning and maintenance - CE marked Suitable For - Leafy vegetables - Lettuce - Spinach - Herbs - Fresh-cut vegetables - Salad mixes Condition Lhedpozd Ufgofx Agtsk This machine is in excellent, near-new condition and is ready for immediate operation. Included - Multiple blue centrifuge baskets as shown in the photographs - Integrated digital control system - Variable speed functionality Availability Available immediately from STC Food Solutions. For pricing, additional information, or to arrange an inspection, please contact us. A premium-quality centrifuge offering efficient product drying with minimal footprint and maximum reliability.

Condition: good (used), Year of construction: 2001, Mori Seiki SV-500/50 4 Axis Vertical Machining Centre with Mori Seiki MSC-501 CNC Control, Table Size 1100mm x 600mm, 40 Tool ATC, BT50 Spindle Taper, Cool Jet 70 - 30 DF High Pressure, Coolant Filtration Unit, Filtermist FX7002 Oil Mist Extractor, Spindle Speed Max 6000rpm, Renishaw Tool Probe Eye, Machine Weight 7800kg. S/No. 1864 Includes Various BT50 Spindle Tool Holders in ATC and Boxes Lhjdjx Nap Dspfx Agtek

Year of construction: 2000, condition: good (used), Technical specifications Lhedpfx Agjv Tz I Rstjk Capacity: 2100 x 650 mm

Condition: good (used), Year of construction: 1968, functionality: unexamined, turning diameter: 1,500 mm, For sale: 1 used head lathe / facing lathe Manufacturer: Heyligenstaedt GmbH Werkzeugmaschinenfabrik type: 505ev/500 YEAR OF MANUFACTURE: 1968 Diameter face plate: 1.500mm Lhodor Nzm Tepfx Agtok incl. documentation The machine can be inspected in our warehouse in 09599 Freiberg.