Used Zeiss Axio Microscope Inspection Setup for sale (18,084)

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5B0S000433, No minimum price – guaranteed sale to the highest bidder! The new price of the microscope was approximately €100,000! Further technical details can be found in the attached data sheet! TECHNICAL DETAILS Maximum magnification: x1000 Camera VHX-7100 Sensor size: 1/1.7 inch Sensor type: 12.22-megapixel CMOS sensor Total pixels (H x V): 4,168 × 3,062 Virtual pixels (H x V): 4,024 × 3,036 High speed (H x V): 2,048 × 1,536 High resolution, 4K mode OFF (H x V): 2,880 × 2,160 High resolution, 4K mode ON (H x V): 4,000 × 3,000 High resolution (H x V): 12,000 × 9,000 Electronic shutter speed: 1/30, 1/60, 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/5,000, 1/9,000, 1/19,000 Supercharge shutter speed: 0.01-s steps from 0.03 to 4 s LCD monitor Size: 27-inch color LCD Screen size (H x V): 596.16 × 335.34 mm Pixel pitch (H x V): 0.15525 × 0.15525 mm Number of pixels (H x V): 3,840 × 2,160 Display colors: approx. 1.07 billion Viewing angle: ±89° horizontal, ±89° vertical VHX-S770E stand Travel range of the XY stage: ±50 mm Size of the XYθ stage (surface): 233 × 185 mm Speed of the motorized XY stage max.: 20 mm/s Travel range of the Z stage: 49 mm Load capacity: 5 kg Weight: 25.3 kg MACHINE DETAILS Connection: Digital Dimensions & Weight Dimensions without protruding parts (W x H x D): 635 x 450 x 132 mm Weight of the control unit: 10.8 kg Predpfx Aezb Eixji Tsc EQUIPMENT KEYENCE VHX-X1 microscope unit Control console VHX-AX1D Processing unit OP-88885 Camera unit VHX-7100 Objective lens VH-Z00T High-performance objective lens VH-Z100 Motorized revolving head Motorized precision stand VHX-S770E Large motorized XY stage Software module VHX-H6M Ring light and illumination adapter OP-88164 3D profile measurement Manufacturer documentation Original accessories

Condition: used, functionality: fully functional, type of input current: AC, input voltage: 240 V, Equipment: type plate available, Used Keyence Digital Microscope VHX 900/950F Set in Flightcase Pjdpfx Asv A Uptsi Torc Manufacturer: Keyence Model: VHX 900/950F Voltage: 100-240 VAC (50/60 Hz) Set consists of: – Digital microscope + power cable – Digital camera – Lens (Keyence VH-Z20R) – Camera holder + mount – Keyboard + mouse – Console controller – Flightcase

Condition: used, functionality: unexamined, machine/vehicle number: SX-50, Used Cameca SX-50 Electron Microprobe Cameca SX-50 electron microprobe is used (Electron Probe MicroAlalyses). it has a 6” inch stage, 3 WDX Spectrometers with several Cristals LiF, PET, TAP, ODPb, PC1, PC2, PC3. Electron probe microanalysis (EPMA) are generally considered micro-analytical techniques which are able to image or analyze materials we can not generally observe with the resolution offered by visible techniques System is complete with all Books, service Manuals, Software and computer. Also many parts. 1 x Leybold Trivac D16B Vacuum Pump 1 x Alcatel 2012 A Vacuum Pump Prjdpfxewnb D To Ai Tsc 2 x integrated Turbo Pumps

Condition: good (used), Measuring microscope, universal workshop measuring microscope, microscope Predeh Tadpepfx Ai Tjc -Manufacturer: Leitz Wetzlar, universal workshop measuring microscope -Reading accuracy: see photos -Dimension assembled: 255/245/H470 mm -Quantity: 1 pieces available -Price per piece -Dimensions transport box: 710/230/H155 mm -Total weight: 35.4 kg/pc.

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm Prodpfxeuhhzhj Ai Tec number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: used, functionality: fully functional, OlympusIX70-S8F Inverted Fluorescence Phase Contrast Microscope. This Olympus IX70 microscope is capable of phase contrast, DIC, and fluorescence. It comes with an ergonomic tilting binocular head with 10x eyepieces. The microscope has a front and side photo port for adding a camera. The 0.5 N.A. condenser has DP10 and DP20 DIC prisms and Ph1, PhC phase annuli installed with the IX-LWPO polarizer. The 5 position fluorescence turret contains WIBA, and NU fluorescence filters. Also included is the IX-AN analyzer and U-DICT DIC prism. The microscope has a built in 1.0x / 1.5x mag changer. Good working condition. Please check out our other listings as well. Prjdpfx Aieuax T So Tsc

Condition: new, VHX-600E, Keyence Digital Microscope - New Prodpfx Ajq S Ti Eji Tsc Model: VHX-600E Type: VHX-600E Condition: New

Condition: new, bore capacity in steel 30 mm Psdjfg U Tpjpfx Ai Tsrc threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: used, Inspection machine for detecting labelling errors, under- and overfilled bottles, and faulty closures. Defective bottles are diverted. The bottles passing through are also counted. The fill level is measured using gamma absorption. Additional title: Full-bottle inspection machine; years of manufacture appr. 1997 - 2008 Capacity max.: 30000 bo/h Power: 300 VA Voltage: 230 V Frequency: 50 Hz Pedezg I Ndepfx Ai Terc

Year of construction: 2020, condition: good (used), Well-maintained Leica DM IL LED Cellfactory inverted microscope, suitable for cell culture, phase contrast, and routine live-cell observation. Configuration: HI PLAN 4x/0.10 PH0 objective HI PLAN I 20x/0.30 PH1 objective HI PLAN I 20x/0.30 PH1 objective HI PLAN I 40x/0.50 PH2 objective S40/0.45 Leica condenser (521251) HC C-mount 0.50x Slider HC Plan 10x/20 eyepiece(s) Psdpszhia Hjfx Ai Torc Flexacam C1 with remote control Various accessories A robust setup for laboratories, biotechnology, research, and cell culture applications.

Condition: new, Drill press vise MSP, jaws B. 140mm, clamping width 155mm, MAXION · Extremely robust, heavy-duty machine vise for production and craft applications · Base made of high-strength tempered cast iron Predpfe Ab Dn Nox Ai Tsc · Hardened and ground jaws · Sturdy trapezoidal thread spindles with a long handle for maximum clamping force · Other technical features: Slot spacing (center to center): 165mm Clamping width: 155 mm Slot spacing (center to center): 165 mm Jaw width: 140 mm

Condition: used, Year of construction: 2023, CLAAS AXION 830 CMATIC CEBIS, BLACK EDITION, registered: 03/13/2023, 243 hp / 179 kW, 6-cylinder FPT engine with 6.7 l displacement, fuel tank max. 455 l, urea tank max. 42 l, Premium LED package, PROACTIV front axle with braking system, CMATIC including 2 speed memories + CSM, CEBIS, stepless transmission up to 40 km/h, parking brake on the REVERSHIFT lever, Load-Sensing hydraulic system, variable pump 250 l/min, 200 bar, 5 proportional electro-hydraulic control valves, Power-Beyond, LOAD SENSING, CLAAS front lift 5.8 t, external control for front lift and front control valve, front lift + 1x double-acting valve/front connected at the rear, electronic lift control, EHR with radar sensor + slip control, automatic lower link side stabilizers, hydraulic upper link (long), trailer hitch with insert for drawbar, K80, automatic drawbar coupling, air brake system (2-circuit), PTO 540/540 ECO + 1000 rpm, 4-pillar cabin with 4-point suspension, CEBIS control terminal with touch function, ELECTROPILOT with reversing function, comfort seat, fabric, heated, ventilated, air-suspended and swivel, leather steering wheel, passenger seat, automatic climate control, electric mirror including wide-angle mirror, MP3 radio, USB and SD, LED work lights, terminal rail, AUTO PILOT / GPS PILOT Ready, ISOBUS preparation including 2x ISO sockets front and rear, Task Control Basic activation on the tractor side, 2 LED rotating beacons. Offer price including 19% VAT. The location may change, please inquire about the current location before visiting. Subject to change, errors and prior sale. (Internal: 2870) Peds Af H Rzepfx Ai Torc

Condition: new, machine/vehicle number: A5107326, axle configuration: 4x4, power: 173 kW (235.21 HP), maximum speed: 50 km/h, front tire size: 600/70R30, rear tire size: 710/71R42, number of cylinders: 6, motor manufacturer: FPT, Equipment: AdBlue, air conditioning, cabin, front power take-off, General information Year of manufacture: 2026 Technical information Front tyre size: 600/70R30 Rear tyre size: 710/71R42 Drive: Wheel Functional Predpfxo Af U U Us Ai Toc Number of valves: 5 Capacity: 205 l/m Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Pto: 540/540E/1000/1000E Production country: FR Additional information Please contact Afdeling Verkoop for more information = Additional options and accessories = - Air brakes - Cabin suspension - Clothed seats - Cooled seats - Driver seat air suspension - Electronic hitch - Front axle suspension - Front linkage - Heated seats - Load sensing - Operators manual available - Radio - Rotating beacon - Single wheels

Condition: used, Year of construction: 2022, 600/70 R34 Trelleborg TM900 710/75 R42 Trelleborg TM900 CLAAS front three-point hitch, 6.5 t - HD External controls for front three-point hitch and front control unit Electronic load management CEBIS operator terminal with touch function CMATIC incl. 2 speed memory settings + CSM, CEBIS ISOBUS preparation incl. ISO socket, rear AUTO PILOT / GPS PILOT ready ELECTROPILOT with reversing function Steering interface prepared Steering interface activation Electronic lift control, standard EHR lower link Rear three-point hitch, pick-up hitch, Cat. 3 Lower link stabilizers, hydraulic Hydraulic top link, pick-up hitch, Cat. 3 Air brake system (2-circuit), incl. air dryer Hydraulic system, load-sensing, variable pump 220 l/min, 200 bar 5 control valves, electro-hydraulic, proportional Front three-point hitch + 1x double-acting valve/front, connected at the rear Power Beyond, load-sensing connections without flat-face couplings Transmission ratio 40 km/h Front axle PROACTIV, braked Flange axle PTO 540 ECO + 1000 rpm PTO stub 1 3/8" 6-spline and 1 3/4" 6-spline Front fender, pivoting, 620 mm 355 hp max. power, 360 hp homologated rated power, ECE R 120 Large diesel pre-filter Predpfxo Agba Uo Ai Tec Battery main switch, electronic Air compressor with air dryer Cab with 4-point suspension Roof with sunroof, opens to the rear Rear window for 4-post cab, tinted Electric mirrors, incl. wide-angle mirror Fender extensions to 2.75 m outside width 2 terminal rails, headliner and side window Driver's working lights, A-pillar Overwidth rear lights, LED with warning signs 4x driving lights LED, 2x work lights LED on hood Color, CLAAS green CEBIS comfort seat, fabric, semi-active lateral suspension Passenger seat with safety belt Automatic climate control, incl. preparation for Cat. 3 MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system

Condition: used, Year of construction: 2023, incl. MC Flex Flex | 5 years, 800 hours/year (4000 hours) / Service contract 150 EUR End date: 09/24/2028 600/70 R30 Trelleborg 650/85 R38 Trelleborg CLAAS front linkage 5.8 t External control for front linkage and front control unit Front PTO 1,000 rpm (mounted) CEBIS operator terminal with touch function CMATIC incl. 2 speed memory + CSM, CEBIS Generator 250 Amp/hour Pjdo Aga Ecepfx Ai Tjrc ISOBUS preparation incl. ISO socket rear Task Control Basic activated, tractor side AUTO PILOT / GPS PILOT Ready CLAAS communication module (LTE) ISOBUS activation for CEBIS ELECTROPILOT with reversing function Activation of video function CEBIS + CPC InCab connection for 2 cameras Steering interface prepared Steering interface activation Electronic lift control, EHR with radar sensor + slip control Lower links rear linkage, pick-up hitch Cat. 3 Lower link stabilizers, automatic Hydraulic top link long, pick-up hitch Cat. 3 Trailer hitch with insert for drawbar Drawbar with ball hitch incl. K50 Tow hitch, automatic with 38 mm bolt diameter Ball set Cat. 3/2 Air brake system (2-circuit), incl. air dryer Monopedal Hydraulic system Load-Sensing, variable pump 205 l/min, 200 bar 5 control units, electrohydraulic proportional Front linkage + 1x dw/front connected at the rear Power Beyond, Load-Sensing connections without flat-face couplings CMATIC - Continuously variable transmission Transmission ratio 50 km/h Front axle PROACTIV braked Rear axle, standard PTO 540/540 ECO + 1000 rpm PTO stub 1 3/8" 6- and 1 3/4" 6-spline Parking brake on REVERSHIFT lever Front mudguards, pivoting, 620 mm 295 hp max. power, 284 hp homologated rated power, ECE R 120 Large diesel pre-filter Battery main switch, electronic Air compressor Engine brake Cab with 4-point suspension Roof, with sunroof, opening to the rear Rear window for 4-post cab, tinted Rear window wiper, incl. side wiper on the right Electric mirror, incl. wide-angle mirror Fender extensions rear mudguards, overall width 2.75 m Terminal rail, headliner Toolbox Dust box removable, left Additional interface sockets 2 LED driving lights, A-pillar Overwidth rear lights, LED with warning signs 4x driving lights LED, 2x work lights LED on the hood Work lights LED – Premium Work lighting LED – Premium Color, CLAAS Green CEBIS Comfort seat, fabric, semi-active longitudinal/lateral suspension Passenger seat with seatbelt Automatic climate control, incl. preparation Cat. 3 MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system Cigarette lighter Steering wheel, leather Dynamic steering with GPS Ready, AUTO PILOT 50 km/h sticker 2 revolving hazard lights LED LED Premium package Driver Premium package

Condition: used, machine/vehicle number: A4102437, operating hours: 10,515 h, axle configuration: 4x4, power: 173 kW (235.21 HP), maximum speed: 50 km/h, front tire size: 600/70R30, rear tire size: 710/70R42, number of cylinders: 6, Year of manufacture: 2017 Front tyre size: 600/70R30 Rear tyre size: 710/70R42 Drive: Wheel Number of valves: 4 Capacity: 150 l/m Pto: 540/1000/1000E Please contact Afdeling Verkoop for more information = Additional options and accessories = - Single wheels Podo Agagqepfx Ai Torc

Condition: used, operating hours: 650 h, axle configuration: 4x4, maximum speed: 50 km/h, front tire size: 600/70R30, rear tire size: 710/70R42, number of cylinders: 6, Year of manufacture: 2025 Front tyre size: 600/70R30 Rear tyre size: 710/70R42 Drive: Wheel Number of valves: 5 Capacity: 205 l/m Pto: 540/1000/1000E Production country: FR Please contact Afdeling Verkoop for more information Psdpfx Aj Agautei Tjrc = Additional options and accessories = - Single wheels

Condition: used, Year of construction: 2021, S 10 Terminal GPS steering system RTK Net Track width 2.25 m ELECTROPILOT with reversing function Prjdpfx Ao Aghq Tji Toc Activation of video function CEBIS Lower link, rear linkage, hitch hook Cat. 3 Hydraulic system with load sensing, variable pump 220 l/min

Condition: used, Year of construction: 2022, CLAAS AXION 810 CMATIC CIS+ - Year of manufacture: 2022 - Driver package - Removable storage box, left side - Automatic climate control, incl. preparation for Cat. 3 - MP3 radio with Bluetooth, USB, SD, external microphone, and hands-free system - Electric mirrors, incl. wide-angle mirrors - Front tires: 600/70 R30 Vredestein Traxion XXL / solid rim / wide track - Rear tires: 710/70 R42 Vredestein Traxion XXL / solid rim - External controls for front lift and front control unit - WITHOUT external controls for front lift - TELEMATICS advanced license, 1 year - Long hydraulic top link, hitch hook Cat. 3 - Drawbar with hitch ball - Load-Sensing hydraulic system, variable pump 205 l/min, 200 bar - Front lift + 1x double-acting valve/front, connected at the rear - Stub axle, 10-hole rims, external width 2.50 m - Front fender, pivoting, 620 mm - 2 flanges for stub axle (single wheel) - Fender extensions, rear wheel fenders, external width 2.75 m Prjdpfx As Agiaxji Toc - 4x work lights LED, 2x work lights LED on the hood - Work lighting LED: 2x front, 2x rear, 2x step - Steering wheel, leather - 2 rotating beacon lights LED

Condition: used, Year of construction: 2022, Track width: 2.25 m Hydraulic pump with 205 l/min Pjdpfx Aij Aghk Re Terc RTK steering system, Trimble FX 750

Condition: used, Stereomicroscope, projection enlarger, microscope, projector MOTIC type SL-41 Series Year of manufacture: approx. 1995 Magnification lens W10X/20 Power supply 230 Volts, 50Hz - Table stand with power supply for reflected light - Height-adjustable objective head - Round column stand with large outreach, inclinable extension arm - Light source for incident light 12 Volts, 10 Watts Space requirement (L x W x H): 500 x 140 x 350 mm Weight approx. 10 kg Predpfx Aisxtq Aae Tec Good condition

Condition: good (used), Year of construction: 2006, Boring power 35.0 / 40.0 mm bore capacity in cast iron 50.0 mm threading M 30 bore stroke 150 mm Size of table plate 730 x 210 mm Center of spindle to wall or column 280 mm Speed 80.0 - 1.400 U/min distance spindle /table 85 - 755 mm spindle taper MT 4 MK column diameter 120 mm feed 0.1 / 0.2 / 0.3 mm/U voltage 400 V Motor output 1.3 / 2.3 KW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features: - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop - Stepless speed adjustment Prsdpfozl E Ubox Ai Toc - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF)

Condition: good (used), Specifications Head: Trinocular viewing head Eyepieces: 10x Reflected Light: Brightfield and darkfield reflected light Nosepiece: 5-position brightfield/darkfield Objectives: MPlan BF/DF 5x, 10x, 20x, 50x Stage: XY stage Focusing: Coaxial coarse and fine adjustment Light Source: 12V 100W reflected light illuminator Pedpfx Aiszwpdds Terc

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, The JCM-7000 combines simple sample navigation with a range of advanced automatic functions. A large sample chamber, high resolution, and an optional low vacuum mode for non-conductive samples make this desktop SEM a versatile, mobile all-rounder. Features: • SE/BSE detection • Magnification up to x100,000, resolution approx. 8 nm Psdpfxezn Ih Ao Ai Tjrc • Low vacuum operation for non-conductive samples • Hardware and software integrated EDX system for elemental characterization • Live elemental analysis, live imaging (including 3D imaging/topography) • Intuitive operation with recipes, automatic functions, image montages, etc. • Large chamber for samples up to 80 mm diameter and 50 mm height • Compact & mobile • Dimensions (Main Unit): 324 mm W x 586 mm D x 566 mm H

Condition: excellent (used), functionality: fully functional, Mitutoyo Microscope Head, FS70Z Model: FS70Z Condition: Used Prsdpfezh I R Rjx Ai Tsc General: 1X/2X focus distance, 50mm laser video microscope housing (FS70Z), Mitutoyo-378-185-1 Accessories: Documentation