Used Zwickroell Zwick/Roell Ltm10 Material Testing Machine (Electrodynamic Testing Machine) for sale (90,906)

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Lhodpexxb Rrjfx Amzen Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Vötsch Type: VBT 03/500 Air-cooled, with separate cooling unit Material testing chamber with water flooding and spraying system for freeze-thaw cycling tests The Vötsch VBT 03/500 is suitable for testing the frost and temperature resistance of construction materials such as concrete, bricks, clinker, natural stone and tiles. Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the steady state according to IEC 60068-3-5, depending on the test chamber temperature Time-dependent ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for standard spraying system Number of spray nozzles 6 Spray rate per nozzle 0.5 l/min Data for spraying system according to EN 539-2, Method B Number of spray nozzles 6 Spray rate per nozzle 4.5 l/min Additional flooding nozzles 2 Spray rate additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Additional cooling unit: Manufacturer: Alfa Laval Type: ACL501AS BO 2L Year of manufacture: 2009 Weight: 140 kg Design: Unit with fan Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Lhsdpfxezh D S Ro Amzjn Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, to be provided by the customer Weight approx. 890 kg net For your safety as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Straightening and welding plate made of steel, solid material Ljdehwn Tuepfx Amzshn Machined steel plate made from a tool steel Length: 2980 mm Width: 1580 mm Thickness: 94 mm - solid steel plate - surface milled - 4 pieces of bolted support brackets - plate with some symmetrical holes Own weight: 3400 kg

Condition: excellent (used), Angel Lhsdpfjpa Rhbox Amzsn Victory 1350H500V/220 Combi Closing 220 tons year 2004 Clamping plan WxH 960x830 Scrow 55mm+40 mm 618 cm3+251 EC100/A03 Minmal mold height 320mm Maximum 730mm

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM10 Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Ljdpfx Amod R Dpmezehn Load cell: 10 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option of control and evaluation with the basic software. This allows you to generate different test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Year of construction: 2026, operating hours: 1 h, condition: new, machine/vehicle number: H10TM, Universal testing machine H10TM Force: 10 kN Crosshead travel: 700 mm Installation space: 400 mm Overall height: 1230 mm Weight: approx. 84 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: Lhjdpfozuma Rex Amzjn - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Load cells: 5N-10N-20N-50N-100N-200N-500N-1kN-2kN-3kN-5kN-10kN - Grips: Compression platens, bending fixtures, shear fixtures, wedge grips, scissor grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, Lhsdpjyvvlbjfx Amzen TStat, TStylus, WMI, wingeco.

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, X-Floc EM400/440 Insulation Blowing Machine Professional high-performance blowing machine designed for processing a wide range of loose insulation and fibre materials. Suitable for open blowing, dry injection, damp-spray applications and material conveying, it can be used both on construction sites and as part of a stationary production system. The machine is equipped with a large loading hopper of approximately 1,000 litres, capable of holding around 5–6 standard bags of insulation material. Four rotating shredder shafts progressively break up and condition the compacted fibres before transferring them into the rotary airlock. The adjustable airlock feed gate allows precise control of the material flow. Depending on the version and material used, the EM400/440 can reach a processing capacity of up to approximately 1,600 kg/h. The adjustable air system delivers a maximum pressure of 540 mbar, with an air volume of approximately 100–430 m³/h for the EM400 and up to 100–680 m³/h for the EM440. Main features: Suitable for different insulation and fibre materials Two-stage material conditioning system Four high-speed shredder shafts Ledpjzlggxsfx Amzshn Approx. 1,000-litre loading hopper Adjustable material flow with 10 feed-gate positions Low-dust loading system with transparent strip curtains Connection for external dust extraction Remote adjustment of air and material parameters Robust, low-maintenance industrial construction Easy access to internal components for servicing Direct NW 76 mm hose connection Suitable for mobile or stationary applications The machine can be operated using a cable or optional wireless remote control, allowing the operator to adjust air output, material supply and pressure-control functions directly from the working area. Technical data: Processing capacity: up to approx. 1,600 kg/h Maximum pressure: 540 mbar Hopper volume: approx. 1,000 litres Shredder shafts: 4 Dimensions: approx. 1,285 × 1,000 × 1,800 mm Filling height: approx. 1,250 mm Hose outlet: NW 76 mm EM400 power: approx. 7.5 kW EM440 power: approx. 10.5 kW Weight: approx. 425 kg for EM400 / 445 kg for EM440 Maximum conveying height: approx. 20–45 m for EM400 / 20–60 m for EM440 Optional equipment may include a wireless remote control, pressure-relief valve, internal or external air amplifier, suction drum and dust-extraction system.

Year of construction: 1963, condition: used, functionality: fully functional, machine/vehicle number: D44L/7979, Offer Number: D44L/7979 Machinetype: testing machine Make: LOSENHAUSEN Type: UHP 40000 kp Constr. year: 1963 drawing force: 20 - 400 kN Lhjdpowi Syzjfx Amzon drawing distance max.: 1100 mm Pressure: 40 to Location: In our warehouse

Condition: used, Straightening and welding plate made of steel Lhedpfjy N Du Rsx Amzen Machined steel plate from a tool frame Length: 2980 mm Width: 1380 mm Thickness: 74 mm - solid steel plate - milled surface - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Net weight: 2175 kg

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Lhodpfx Amed R Dpuszon Resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a keypad, allowing for a “quick test” even without a PC. For tests that require data storage and a record of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: Lodpfx Aszkvvyjmzjhn BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Lhodpfx Aeif Sg Ssmzjn Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: used, Year of construction: 2007, max. wheel diameter 400 mm Lsdpfx Amsy D T Suozjhn workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control Siemens 840D weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots Lsdpfxox D Tbme Amzjhn T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Ljdpfx Ajydanhsmzshn Load Cell: 5 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Traverse stroke: 1200 mm Working space depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Lhedpfx Ajyc U Rbjmzen Travel resolution: 0.01 mm Test speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be conducted without a PC. For tests requiring data storage and recording of the curve progression, the basic software enables both control and evaluation. The software allows you to generate various test sequences and create test reports. Additionally, you can further process the raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, total length: 1,980 mm, total height: 2,150 mm, total width: 1,850 mm, type of input current: AC, distance between centers: 750 mm, input voltage: 220 V, workpiece diameter between centers: 350 mm, workpiece diameter (max.): 350 mm, year of last overhaul: 2026, overall weight: 750 kg, Technical data: – Workpiece diameter max. 350 mm – Distance between centers 0–750 mm – Measurable tooth width: 600 mm – Largest/smallest module 12–1.5 mm – Workpiece table diameter 260 mm – Installation dimensions: Length × Width × Height 1980 mm × 1850 mm × 2150 mm – Machine weight: net 750 kg Control system: Zeiss ST 57 Required power supply: 220 volts, 50 Hz, compressed air: 8 bar Machine accessories: – Basic machine with probe holder – Zeiss VAST measuring head – Zeiss quick-change probe system with 4 positions – Calibration sphere – Complete set of workpiece carriers – Auxiliary table – Probe assortment: Various measuring probes for different modules – Quick-change tool holder for holding various measuring probes / a total of 4 – New MINI computer with monitor and printer – Operating manual in English Software: Standard equipment – New software module for testing spur and helical gears, evaluating K profiles, Lodpfxjz Hd I Tj Amzshn pitch, concentricity and Klingelnberg index – Selectable software language – Evaluation according to DIN/ISO/AGMA/customer-specific tolerances

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm module 0,5 - 25 centre distance 750 mm Lhodpfxoy Umi Ie Amzjn weight of the machine ca. 0,2 t dimensions of the machine ca. 0,8 x 0,6 x 0,6 m worm testing roll-machine

Condition: used, Max. speed: 20km/h, weight: ca. 19.4t, on-site inspection is possible. Lhsdpfx Ajz R A Rismzjn

Year of construction: 2026, condition: new, functionality: fully functional, Universal testing machine PM10 (10 kN) – Complete system including software For sale is a versatile universal testing machine PM10 with a maximum testing force of 10 kN. The system is characterized by its flexibility and efficient stand-alone operation. The machine is ready for use, including evaluation electronics and basic software for comprehensive data analysis. Technical data & performance features • Maximum testing force: 10 kN (including matching load cell) • Crosshead travel: 700 mm • Testing space / installation space: 400 mm • Testing speed: 1 – 500 mm/min • Return speed: 700 mm/min • Path resolution: 0.01 mm • Overall height: 1,230 mm • Weight: approx. 85 kg Highlights & operation • Flexible stand-alone operation: Quick tests can be performed directly on the machine via a numeric keypad, completely without a PC. • Powerful basic software: Machine control, recording of curves, and detailed data storage when connected to a PC. • Open data interface: Easy export of raw data for further processing in your own programs (e.g., Excel). Scope of supply • Universal testing machine PM10 • Load cell 10 kN Ledpfx Ajyc U Ugemzshn • Integrated evaluation electronics • Basic software for control and evaluation Optional services & accessories (upon request) • Service: Delivery, professional installation, and commissioning on site • Certification: DAkkS or factory calibration according to DIN EN ISO 7500-1 • Extensive range of clamping devices: Pressure plates, bending and shear devices, wedge and scissor clamps, peeling and screw clamps, as well as pneumatic or hydraulic clamping devices. The machine is available immediately. Please contact us for an individual offer including the appropriate accessories for your testing requirements!

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system Ljdpfezf Nk Tsx Amzehn • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Year of construction: 2025, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm Lsdpomdn Trsfx Amzjhn max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: excellent (used), Module range: 0,1 – 2 mm Centre distance range: 25 – 85 mm Vertical stroke of master gear slide: 40 mm Diameter of measured gear, max. (clamped on arbor): 120 mm Diameter of measured gear, max. (clamped between centers): 80 mm Maximum distance between centers for clamping of measured part: 200 mm Weight of measured gear, max.: 0,5 kg Measuring force adjustment, manually adjustable: 0 – 8 N Lsdpfx Aowkgr Iemzohn Standard master gear arbor, diameter: 12,7 mm

Condition: excellent (used), max. wheel diameter 5 - 630 mm gear width 500 mm max. module 20 min. module 0,5 workpiece weight 350 kg Control IBH Macro max. workpiece diameter 630 mm clamping length 1050 mm total power requirement 1,8 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,0 x 0,7 x 2,4 m Spur gear software for internal and external gearing Profile inspection standard crowning head - root relief K - profile Direction test standard crowning head - root relief K - profile graduation test Axis position correction for on-the-fly measurements up to 0.2 mm axis position Lhsdpfjyyqtzsx Amzen error Snail software 3 carriers for gears, 1 carrier block, calibration device, Windows 7