Used 10 Kopf for sale (30,063)

Condition: ready for operation (used), Year of construction: 2012, A complete carton sealing and conveyor line (packing line) is available. 1) Carton sealing machine Soco T-10, year of manufacture: 2012, sealing capacity: 30 cartons/min, working height range: 620mm-720mm, adhesive tape overlap: 70mm, max. adhesive tape roll diameter: 385mm, min. carton dimensions X/Y: 90mm/80mm, max. carton dimensions X/Y: 515mm/520mm, machine weight: approx. 200kg. 2) Bottom flap folder Soco F-100-5, year of manufacture: 2012, carton width range: 190mm-240mm, max. carton length: 620mm, machine dimensions X/Y: approx. 460mm/895mm. 3) Conveyor technology consisting of roller conveyors and plastic rollers, roller diameter: 48mm, roller conveyor length: 2500mm, roller conveyor width: 300mm, center distance: 60mm. 4) Weighing system Rhewa 82 basic, max. weighing capacity: 150kg. 5) Lift table Ecoline U-shape, platform dimensions X/Y: 1450mm/1140mm, max. load capacity: 1000kg, max. lifting height: 760mm. 6) Vacuum tube lifter J. Schmalz Jumbo Sprint 45-Zent, year of manufacture: 2003, load capacity: 45kg, max. lifting speed: 60m/min, max. lift: 1800mm, suction cup diameter: 110mm, lifting column inner diameter: 140mm, length: 2550mm, gripper height: 112mm, suction cups: 4, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Tedpfex I Rqvsx Antob

Condition: ready for operation (used), Year of construction: 2009, A fully automatic rotary labeling machine Anker (KHS Group) is available. Labeling method: wet glue labels, bottle formats: 250ml/500ml/750ml, label dimensions 1 X/Y: 33mm/119mm, label dimensions 2 X/Y: 36mm/150mm, label dimensions 3 X/Y: 48mm/158mm, labeling capacity: 20000bottles/h. Including formats for wet glue and VE+RE. Documentation available. An on-site inspection is possible. Tsdpfsyv H Iysx Antjb

Year of construction: 1968, condition: ready for operation (used), A vertical large-format vertical turning lathe TOS is available. Turning diameter cross rail support/side support: 1150mm/1000mm, max. workpiece weight: 3000kg, max. workpiece height: 900mm, travel X/Y/Z: 500mm/500mm/750mm, table diameter: 1000mm, max. table torque: approx. 8800Nm, machine dimensions X/Y/Z: approx. 2600mm/2700mm/4000mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Expected to be available from Q3 2026. Tedpfx Aneyifltetob

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Approximate technical data: - Pressing force 10 t - Overhang 150 mm - Table size 520 x 320 mm - Adjustable table height 160 mm - Through-hole in the table 165 x 125 mm - Overall installation height 220 mm - Ram area 240 x 150 mm Todpfxsktg Dho Antsb - Dowel hole in the ram 30 mm - Ram adjustability 40 mm - Stroke adjustment 4 - 60 mm - Stroke rate 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive 380 V / 1.1 kW - Space requirement approx. W 1000 x H 1800 x D 1100 mm - Weight approx. 1300 kg

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, The subject of sale is a new glass warehouse of our production. 10-drawer warehouse, sliding for 2500 kg glass boxes (160 x 255). Manually extendable rack, we also produce electronically extendable racks. Number of drawers, size depending on customer needs. Drawers slide over a flat bar (loading side) to prevent tripping. Our fitters can install the rack at the customer's premises throughout Europe. Tedpfx Asgd Ilyentsb

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, The subject of sale is a warehouse for the storage of glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. Todegfm Nmopfx Anteb The magazine has the form of retractable, slightly inclined drawers. With it, you can save up to 75% of space, because all drawers are parallel to each other and only 10 millimeters apart. We offer various dimensional and lifting versions, however, after consultation, we are also able to produce a warehouse with different parameters, taking into account your individual conditions and wishes. The magazine is especially recommended to glass, stone, furniture and advertising companies, which care about the effective use of their space. Specification: Glass racking system 10 drawers for 321 cm x 255 cm glass. Load capacity per drawer is 1500 kg.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, SLIDING RACK FOR GLASS D220-10 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Our sliding racks have the form of slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack in various parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. Tjdpfxehcipgj Antjb D220-10 RACK TECHNICAL DATA Intended use – glass panes 321 cm x 255 cm in wooden boxes Possibility of storing single panes – YES Maximum box size – 345 cm x 275 cm Number of partitions – 10 The width of the storage strip for glass – 22 cm The length of the storage strip for glass – 395 cm The material on which glass is placed – steel supports coated with ash tree strips (5 pieces) Total height (A) – 335 cm Total width (B) – 368 cm Total depth (C) – 407 cm Space needed for the correct use of the rack – 29 m2 Requirements for the ground – smooth / levelled The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 full / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single drawer – 2 500 kg Permissible load-bearing capacity of the whole rack – 25 000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 4 people Drawers – joined (in order to reduce transport costs) Loading the box with glass onto the drawer – gantry, forklift, HDS DOCUMENTS ATTACHED TO D220-10 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty This product is delivered in parts in order to minimise delivery costs. We also deliver our racks to the EU countries and other countries.

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Tsdpfog Ailcjx Antjb Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Year of construction: 2016, condition: good (used), Offer 20599 Technical data: - Load capacity: 10,000 kg - 3 variable lifting chains on the ring above the crossbeam: 2,000 mm - 3 securing chains with hooks, load capacity each: 5,000 kg - 2 x chain length with hooks, approx.: 800 mm - 1 x chain length with hook and tensioning device, approx.: 2,500 mm - 1 x arm length, approx.: 700 mm - 1 x arm length, approx.: 800 mm - 1 x arm length, approx.: 1,100 mm - Crossbeam dimensions, approx.: L 1600 x W 1400 mm Tedpfx Aegi N Ixontjb - Weight with chains, approx.: 200 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg Tedjpxmxcjpfx Antob - with: - E-foot - switch - cutting line lighting

Condition: new, Coax 5-PCS-2 10 NC lateral valve, unused, 100% functional, scope of delivery as shown in the photos. Tsdpfx Aoi D Umdjntjb

Condition: used, rated capacity 265 kVA capacity in kVA 320 kVA Heating capacity / kW power fuel Diesel required space 3,25x1,14x1,7 m Diesel emergency generator generator 10 cylinders MAN D2530MT E Engine number: 43036630914101 Siemens engine Todpfx Ansuddfhotjb Type: 1FC352 B5/B20 IP23

Condition: used, TECHNICAL DETAILS - Objectives : 1.5X et 0.5X Tjdpfjug U Rgsx Anteb - Light : OLYMPUS HIGHLIGHT 3001

Condition: used, TECHNICAL DETAILS Todpfxjuhaikj Antjb Same as on photos

Condition: good (used), Year of construction: 2000, Offer 24467 Technical data: - max. pressing force 10 t - max. ram stroke approx. 550 mm - Tool mounting thread M 16 - Width of column approx. 1000 mm - Column depth approx. 500 mm - Min. / max. installation height 450 / 1350 mm Tedpsuzhmgofx Antsb - Table height adjustable - Space requirement approx. W 1600 x H 2650 x D 850 mm - Weight approx. 350 kg

Condition: excellent (used), Microbox Simatic PC 420 6 A G 4040-OAE 10-OA BO S VPTN 00 1726 Tsdpfsim H Shex Antsb

Condition: good (used), Year of construction: 2011, machine/vehicle number: 12355, Offer 25080 Movable panel rack with 10 movable material stands Technical specifications: - Stand - Shelf dimensions / support dimensions W 3000 x H 1800 mm - Shelf depth / footprint 180 mm - Maximum load per shelf: 2000 kg Todpfev Ra Idox Antjb - Slide-in support bracket - Track rail L 4750 mm - Total space requirement approx. L 4750 x H 2200 x D 4000 mm - Weight approx. 3000 kg

Condition: used, Year of construction: 1994, operating hours: 8,163 h, Type of fuel: Diesel Colour: Grey Empty weight: 14.000 kg Dimensions (LxBxH): 440 x 237 x 411 cm Lifting capacity: 10.000 kg Lift height: 493 cm Fork dimensions: 1.640 x 2.270 mm - Year: 1994 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1907 - Operating hours: 8163 - Lifting capacity: 10000kg - Lifting height: 4930mm - Overhead clearance: 4110mm - Free lift: 0mm - Fork length: 1640mm - Maximum fork width: 2270mm - Minimum fork width: 590mm - Number of wheels: 6 Wheels - Attachment: Fork positioner, Side-shift - Options: Full cabin, Radio, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Volvo - Transport dimensions: 4400mm x 2370mm x 4110mm (l x w x h) - Transport weight [kg]: 14000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Todpsyr D Sgjfx Antsb Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, offer consists of: Horizon PK-10 klicker for almost all horizon machines Tsdeu Tdm Ropfx Anteb We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, TECHNICAL DETAILS - Belt width : 80 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] Todpjw H Dvpjfx Antsb - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: used, Year of construction: 2019, fuel type: electric, Lifting capacity: 200 kg Please contact Gebrauchtgeräte Center for more information Tsdszqi S Ispfx Anteb

Condition: new, power: 349 kW (474.51 HP), first registration: 02/2026, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 680 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,200 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 2026, Equipment: air conditioning, = Additional options and accessories = - Leaf spring suspension - Sleeper cab - Sun visor = Further information = Transmission: 16S2520TO, manual transmission Todpfozrmb Aex Antob Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Number of cylinders: 6 Engine displacement: 12,900 cc Unladen weight: 9,800 kg

Condition: used, Year of construction: 1984, operating hours: 29,950 h, functionality: unexamined, machine/vehicle number: 6051, Used BOGE screw compressor, model VEX 40D11, from industrial stock. Robust, proven technology with documented operating hours, control system, and cooling. Suitable for workshops, backup operation, or further use. Technical data: - Power: 30 kW - Volumetric flow rate: approx. 4.0 m³/min - Maximum pressure: 10 bar - Speed: 4,360 rpm - Connection: 380/400 V, three-phase - Current operating hour counter: 12,622.7 h - Documented previous counter reading: 17,326.4 h - Documented total hours: approx. 29,950 h - Base load/idle control via pressure switch FF142 - Switching range: 8.5–9.5 bar - WILO industrial circulation pump Condition: used and commensurate with its age. In operation until dismantling; no functional test currently performed, therefore functionality is unverified. Sold as is, as viewed, or according to the photos. Todpezrn Ahefx Antsb Location: 65618 Selters (Taunus), Germany.

Condition: used, Year of construction: 2018, Overview This DUETTI case packing group combines a case erector, a case packer and a top-loading case sealer for American-style cases, built by Duetti Packaging (Galliera Veneta, Italy) in 2018 and commissioned at the end of 2018. It packs bottles in 12 x 33 cl and 6 x 75 cl formats at approx. 6,000 bottles/h (33 cl) or approx. 3,000 bottles/h (75 cl), around 10 cases/min. The group is still installed and under power at a brewery in France and can be visited in production on request. Technical data - Manufacturer: Duetti Packaging (Galliera Veneta, Italy) - Model: FORMER 20H + PACKER 10 + CHMSS - Year of manufacture: 2018 (commissioned end of 2018) - Machine type: case former - case packer - case sealer group, American-style cases (carton) - Case formats: 12 x 33 cl and 6 x 75 cl - Capacity: approx. 6,000 bottles/h (12 x 33 cl), approx. 3,000 bottles/h (6 x 75 cl) - approx. 10 cases/min - Gluing: hot melt, Meler Micron 5 unit Equipment - FORMER 20H case erector: carton magazine, vacuum gripper, bottom folding and gluing with 4 nozzles, pressure cylinder and pad, 90° discharge towards the packing section - PACKER 10 case packer: 4-lane bottle distributor, batch formation via sensors, gripper head with inflatable tulip grippers, Cartesian-type movements Tedpfx Ajzrpwtjntjb - CHMSS top-loading case sealer: 4 glue nozzles and pressure rollers - Meler Micron 5 hot-melt unit - Case transport through former and sealer via rough-surfaced side belts (no push bars); conveyor in the filling section - Inclined transfer belt between filling and sealing, convertible to horizontal by removing the sealer foot extensions - Technical documentation (operating manuals, electrical schematics) and CE declarations of conformity Please note: case marking / coding is not included in the scope of delivery. Condition Used - in production: the group is still installed and under power and can be visited in operation on request. Availability From February 2027 - the line remains in production until the end of January 2027 and is dismantled thereafter. Location: France.

Condition: good (used), Year of construction: 2010, Hook type shotblasting machine 500 kg Tsdozt Nraspfx Antsb OMSG CAPRI 10x15 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 3 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 27 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm !!! With Filter unit !!! Machine is in VERY GOOD condition. It ia disassembled and ready for dellivery.