Used Mc-100 for sale (29,226)

Condition: good (used), Year of manufacture: 2020 Operating hours: 536 CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: JP Please contact Vink Machinery for more information Laodpfsm Nb Tlsx Amzeh Maeda MC285C WME-3 * 2020 * Diesel and 380 volts * 536 working hours * 8.7 meter hook height * 8.2 meters horizontal reach * 2820 kg lifting capacity * Remote control * Inspection until June 2024 * 2160 kg own weight * including documents

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Ljdpsy Hkd Hefx Amzsah Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0085, pressure: 6 bar, power: 895 kW (1,216.86 HP), temperature: 120 °C, Viessmann Vitoplex 100, 895 kW. Laedpfxoz Uikks Amzjh

Condition: used, Manufacturer: Gendron Type: RU 28-100 Max. grinding length: 1000mm Max. grinding diameter: 280mm Center-height: 155mm Table: 1660x150mm Grinding wheel: 300mm Machine-dimensions: 2700x1550x1500mm Financial information VAT: The price shown is exclusive of VAT Lasdpfx Amewnhkmozoh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Piston rod guide, Ø 100/60 Laodpfx As Abhpkjmzoh Alø: 100 mm Packaging quantity: 1 F: 12 mm Thread G: M105x2 Packaging unit: piece Dø: 114 mm Sø: 60 mm A: 70 mm

Condition: new, Lateral guide, type ZF 100, track length 2m, zinc-coated on both sides. * Zinc-coated C-profile * For handrails up to a guide height of 100 mm Lsds Abuzgjpfx Amzoah * Adjustable * Further technical characteristics: Surface: zinc-coated Surface: zinc-coated Design: on both sides Track length: 2 m

Condition: new, Side guide, type ZF 100, track length 3 m, zinc-coated on both sides. · Zinc-coated C-profile · For mounting on support rods up to a guide height of 100 mm · Adjustable · Other technical features: surface: zinc-coated Design: on both sides Surface: zinc-coated Lsdpfx Amo Abuztezjah Track length: 3 m

Condition: new, Description The R-100 STANDARD chipper is a powerful roller chipper specifically designed for shredding branches with a diameter of up to 9 cm. Manufactured at the Remet CNC Technology plant, this wood chipper stands out due to its welded construction, which is completely disassemblable and ensures remarkable rigidity and stability. Thanks to its versatile range of equipment options, the R-100 STANDARD wood chipper can be adapted to various requirements. It can be equipped with a flywheel or a drive wheel, a conveyor belt, or a double bag holder. The conveyor belt can be oriented either to the right or to the rear, depending on the need, to ensure optimal integration into different working environments. With its robust design and the ability to efficiently shred branches up to 9 cm in diameter, the R-100 STANDARD wood chipper represents the ideal solution for reliable wood shredding in various applications. Technical Data Min./Recommended Power 15/25 hp Weight 145 kg Max. Cutting Diameter (fresh softwood) 90 mm Max. Cutting Diameter (fresh hardwood) Lsdpfxs Abwuco Amzsah 80 mm Max. Cutting Diameter (dry hardwood) 70 mm Distance between the shafts 100 mm Blade thickness 10 mm Gear wheel diameter 180 mm Housing thickness of the chipping unit 20 mm Recommended PTO speed 540 rpm Cutting blade material Wear-resistant steel with increased hardness Mounting system Three-point linkage Trailer coupling drawbar force 1000 kg Cutting length (6 blades) 7-14 cm Infeed hopper 62/38 cm

Condition: new, The Nero RSI-100 is a remote-controlled flail mower designed for maintaining tall grass, overgrown areas, and hard-to-reach terrain. With a working width of 100 cm and its powerful 608 cm³ LONCIN gasoline engine delivering 11.5 kW, the machine offers high area performance even under demanding operating conditions. The track chassis ensures secure traction and enables operation on slopes of up to 60°. The machine is conveniently controlled via a wireless remote control. The engine can be started remotely, and the cutting height can be electrically adjusted via a linear actuator within a range of 2 to 12 cm. An integrated 3,500-W generator reliably powers the electrical components. Features: - 100 cm working width for high area performance - Powerful LONCIN gasoline engine with 608 cm³ and 11.5 kW - Wireless remote control with remote start - Electric cutting height adjustment via linear actuator - Cutting height of 2–12 cm - Track chassis for safe operation in difficult terrain - Climbing ability up to 60° - Integrated generator with 3,500 W output - Fuel tank with 16 l capacity - 48 V / 20 Ah battery system Drive: Gasoline engine (Loncin) Lsdpfx Ao Abkrzomzsah Cutting height adjustment: electric via linear actuator Machine dimensions: 1250 x 1440 x 500 mm Engine power: 11.5 kW Battery: 48 V / 20 Ah Generator power: 3500 W Starting system: Remote start via wireless connection Weight: 330 kg Engine displacement: 608 cm³ Climbing ability: up to 60° Working width: 100 cm Fuel tank: 16 l Cutting height: 2-12 cm

Condition: new, 309 143; 309143 L1: 100 mm Packaging unit: piece Packaging quantity: 1 Lodpfx Aj Abmdyemzjah

Condition: new, 309 341; 309341 L1: 100 mm Packaging unit: piece Lajdpe Abmfqsfx Amzjh Packaging quantity: 1

Condition: new, Energy-saving thanks to the use of IE2 motors Low wear due to very low compressor speed Lajdpfo Abn Sxex Amzeh Low-noise operation and high running smoothness In the lower range of pressure vessel sizes, up to 200 liters, they are available in either mobile or stationary versions. For mobile versions in the pressure vessel range of 50 - 200 liters: • Check valve • Relief valve • Manometer • Safety valve • Condor pressure switch • Quick-release coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug For stationary compressors in the pressure vessel range of 50 - 500 liters: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Manometer • Vibration damper Up to 4 kW motor power: • 3 m connection cable with plug • Relief valve From 5.5 kW motor power: • Automatic star-delta starter for wall mounting • Solenoid valve with silencer Suction capacity l/min 380 Delivery rate l/min (at 7 bar) 280 Motor power kW 2.2 Rated voltage V/Hz 400/50 Compressor speed min 855 Max. pressure bar (g) 15 Tank capacity l 100 Stages 2 Weight kg 92 Dimensions l/w/h in mm 1,080/510/1,120 Delivery rate l/min (at 7 bar): 280 Tank capacity l: 100 Dimensions l/w/h in mm: 1,080/510/1,120 Weight kg: 92 Motor power kW: 2.2 Rated voltage V/Hz: 400/50 Stages: 2 Suction capacity l/min: 380 Max. pressure bar (g): 15 Compressor speed min: 855

Condition: new, Description The R-100 STANDARD wood chipper is specifically designed for shredding branches with a diameter of up to 9 cm. Developed and manufactured from the outset in the REMET CNC Technology factory, this wood chipper is characterized by a welded, fully disassemblable construction that ensures the rigidity and strength of the entire machine. The precise cutting mechanism, manufactured using CNC machines, is distinguished by its high quality, accuracy, and coaxial drive, which ensures the long service life of the machine and its components. This high-quality workmanship ensures that the R-100 STANDARD operates reliably even under demanding conditions. In addition, this model is equipped with a foldable conveyor belt with a length of 2.3 m. The conveyor belt can be used to discharge material to the right or to the rear in the direction of travel, allowing for flexible adaptation to various working conditions. This versatility makes the R-100 STANDARD an excellent choice for various applications in wood processing. Technical data Min./Recommended power 15/25 HP Weight 145 kg Max. cutting diameter (fresh softwood) 90 mm Max. cutting diameter (fresh hardwood) 80 mm Ljdpfxj Abpvxo Amzsah Max. cutting diameter (dry hardwood) 70 mm Cutting blade material Wear-resistant steel with increased hardness Infeed hopper 62/38 cm Mounting system Three-point linkage Trailer coupling pulling force 1000 kg Cutting length (6 blades) 7-14 cm

Condition: new, Replacement glass, green, DIN 11 · For welding shields · Other technical properties: Color: green · Material: Glass Lasdpfx Amj Abx Hyozoh Design: DIN 11 Glass size: 90 x 110 mm

Condition: new, Multifunctional product, 100 ml spray can, WD-40 · Five products in one! Rust remover Laodpfxe Abxw Ee Amzeh · Lubricant · Contact cleaner · Corrosion protection · Cleaner ·silicone-, resin- and PTFE-free · penetrates rust layers, loosens stuck mechanisms and seized vehicle and machine parts · removes stubborn dirt, displaces moisture from electrical contacts and prevents leakage currents · leaves a thin protective film that prevents the formation of new moisture and rust on metal parts Packaging: Spray can Contents: 100 ml

Condition: new, Activator 100, solvent-based, colorless to slightly yellowish, 250 ml can, SIKA · A cleaning solution for pretreating bonding surfaces before bonding with Sika® polyurethane adhesives. · For cleaning and improving adhesion in bonding applications on glass, ceramic-coated glass, cut-back polyurethane adhesive layers, as well as PUR-precoated glass and coatings. · Other technical properties: Content: 250 ml · Color: colorless to slightly yellowish · Application: Sika® polyurethane adhesives Ledpfxs Abw T Sj Amzoah · Type: solvent-based · Packaging: can Packaging: can Content: 250 ml Color: colorless to slightly yellowish

Condition: new, Diameter: 8 mm Weight per meter: 0.38 kg/m MBK (Minimum Breaking Force): 70.7 kN Construction: 6x25 cross-laid (IWRC) Number of wires in outer strands: 150 Strength class: 1960 DIN 3058 Material: Steel, steel core IWRC Strand direction: right or left Ends/Fixed length: Loop crimped / Tapered Ledpo Ab Ilxefx Amzjah Length: 100 m

Condition: new, Puller 20-10, clamping depth 100 mm, clamping width 120 mm, 4.5 t, KUKKO · Two-arm design · With sliding puller hooks that remain parallel · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adaptation of the spindle to the shaft via a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Lsdpfx Ame Ab Azujzeah Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by inverting the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: weight: 1.42 kg · Material: special steel Clamping depth: max. 100 mm Material: special steel Clamping width: max. 120 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 1,700 kg, previously installed on a CNC lathe with a diameter of 70 mm. Lodpfj Ab E S Nsx Amzeah

Condition: new, COMBIDISC grinding disc D.38mm K.60 Forte 16000min-¹ PFERD · Corundum A-Forte · For universal applications, from coarse to fine grinding, with high material removal rate and long service life · Other technical features: Design: Forte Ljdpj Ab Ed Sjfx Amzjah max. speed: 25000 min-¹ grit: 60 Ø: 38 mm recommended speed: 10000 - 16000 min-¹

Condition: new, Diameter: 10 mm Weight per meter: 0.45 kg/m MBK (Minimum Breaking Force): 97 kN Construction: SC Number of wires in outer strands: 114 Strength class: 1960 DIN 3058 Material: Steel, IWRC steel core Strand direction: right or left Ends/Fixed length: Loop, crimped / Pointed Length: 100 m Ljdpfx Ao Ab Icwemzjah

Condition: new, The reliability and availability of this 6-strand cable prevent unscheduled downtime. Standard forestry cable Specifications: - 6 x K19S IWRC Lodpfs Ab Ibgox Amzsah - Number of wires in the outer strands: 114 - Compacted rope construction, multi-layer winding - Strength class: 1960 Applications: - Pulling and retrieval cable for tilting mast equipment and long-distance cableways - Winches Steel cables in fixed lengths are always swaged with a loop on one end and tapered on the other.

Condition: used, fuel type: electric, Year of manufacture: 2015 Please contact Gebrauchtgeräte Center for more information Lodpfx Aozzlxljmzsah

Condition: new, Diameter: 14 mm Weight per meter: 0.94 kg/m MBK (Minimum Breaking Force): 211.0 kN Construction: SUPERFILL® compacted Strength class: 1960 Standard: EN 12385-4 Material: Steel, steel core IWRC Strand direction: right or left Lsdpfj Ab Nmqsx Amzeah Ends / Fixed length: Loop crimped / Tapered Length: 100 m

Condition: new, Diameter: 13 mm Weight per meter: 0.89 kg/m MBK (Minimum Breaking Force): 185.0 kN Construction: 6 x K26WS IWRC Number of wires in outer strands: 162 Strength class: 1960 Standard: EN 12385-4 Material: Steel, steel core IWRC Strand direction: right or left Ends / Fixed length: Loop crimped / Pointed Length: 100 m Ljdj Ab Nn Iepfx Amzjah