Used Rsf-Pro 2-30 for sale (89,792)

Condition: new, Year of construction: 2024, overall weight: 260 kg, fuel type: diesel, tank capacity: 34 l, color: black, output current: 65 A, output voltage: 230 V, output frequency: 50 Hz, nominal power: 12 kW (16.32 HP), continuous power: 10 kW (13.60 HP), total length: 930 mm, total width: 660 mm, total height: 900 mm, rotational speed (max.): 3,000 rpm, type of cooling: water, Model Proton 12000 230V is a single-phase generator with a maximum power of 12kW. This aggregate is equipped with a cooler thanks to which we increase its continuous operation time up to 24 hours. The aggregate has a built-in AVR regulator. ABBREVIATION: Genset type: Single-phase Liquid-cooled: Yes Fuel type: Diesel Voltage: 230V Rated power: 230V - 10,000 watts (12.5kVA) Maximum power up to 15 minutes - 12,000 watts (15 kVA) WEIGHT: Gross weight: 260 kg FUELING: 2.2 liters per hour (at 70% of maximum power) 1.8 liters per hour (at 40% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 2V8-W Fuel type - Diesel (Diesel) Podpfx Aetq Hggsl Sjpr Engine type - High-pressure, 4-stroke Number of cylinders - 2 Direct injection - Yes Type of cooling - Liquid (The unit has a radiator) Displacement - 998 cc3 Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 24 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure sensor - Yes Oil condition sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 1100W Oil sump capacity - 2.5l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 220-CAVR-D Rated current (230V) - 65 A Voltage - 230V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to discharge exhaust fumes outside the facility - Yes Sound pressure level LPA - 85dB (measurement - 5m, open space) Fuel tank capacity - 34 liters Operating time on a full tank (Average) - 12 hours SOCKETS: Number of three-phase outlets - none Number of single-phase sockets - 1 piece (32A), 1 piece (16A) Number of other outlets - none DIMENSIONS: Diameter of wheels - 10 cm Width - 66 cm Length - 93 cm Height - 90 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - No Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 1xC39 (for 230V) Hour meter - Yes Battery - 45 Ah TRANSPORT KIT: Yes - Small wheels Yes - Handrails on two sides Yes - Swivel wheels Yes - Wheels with mechanical lock RICH EQUIPMENT See below what else the kit includes: - Battery - Air filter - Oil filter - Fuel filter - Keys for current service - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: used, Press brake Amada Promecam HFB 12530 Ppjdpfex H A Dlex Al Sjr 5 axes Y1 Y2 X Z1 Z2 Controller Delem DA58 Retrofitting available

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) Podpfx Alsyxccro Sspr - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, cutting height (max.): 305 mm, control type: manual, actuation type: manual, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, overall weight: 19 kg, torque: 5 Nm, cable length: 4,000 mm, saw band length: 1,710 mm, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, PBS300 TITAN – 300 mm Cutting Capacity The PBS300 TITAN is a professional portable bandsaw designed for processing large structural timber sections up to 300 mm. The machine combines high cutting capacity with a compact and lightweight construction, making it suitable for carpenters, timber frame builders and woodworking companies that require a mobile solution for cutting large wooden elements. Despite its compact size, the PBS300 TITAN provides stable cutting performance in thick structural timber. Well-adjusted machines can cut timber sections up to maximum thickness without noticeable blade drift. The design focuses on rigid blade guidance, efficient manufacturability and practical usability in professional environments. Key Features • Maximum cutting height: 300 mm • Designed for structural timber processing • Hybrid blade guide system (steel guides + bearings) • Precision-machined aluminum band wheels • Compact and portable design – 19 kg machine weight • Robust welded aluminum frame construction • Developed specifically for professional users Typical applications: • timber frame construction • carpentry workshops • log house building • structural timber processing Technical Specifications Cutting height: 300 mm Band wheel diameter: 203 mm Blade length: 1710 mm Blade width: 6–13 mm Guide table size: 420 × 310 mm Motor: asynchronous electric motor Power: 0.75 kW Speed: 1420 RPM Power supply: 230 V (single-phase) Protection class: IP54 Connection cable length: 4 m Machine weight: 19 kg Manufacturer Astra Pro Sp. z o.o. We manufacture machines for other companies as an OEM supplier. The PBS300 TITAN is our own model developed based on years of manufacturing experience in this niche market. Pedpfev Tcuxox Al Sjpr More Information If you are interested in the machine, please contact us for technical details, pricing and delivery information.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8310’ black-and-white production system Item for sale: 1 x Ricoh Pro 8310 with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 431,372 pages Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). Ppjdpfx Asy Altbjl Sjr The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 52180, - Type: TB-21.65/J35 - Width: 620 mm - Weight: 550 kg - Volume: 0.43 m³ Pedpjvvaq Nefx Al Sopr - Mount CW 30/40

Condition: used, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 Ppsdpfxow N Su Do Al Sjr - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,100 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 540 kg Price: On request Ppodpew N St Hofx Al Ser Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 260 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Motor power: 2.2kW - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, This offer is for a used black-and-white production printer, the ‘Ricoh Pro 8300s’ Item for sale: 1 x Ricoh Pro 8300s with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 2,343,873 pages Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Pedpfx Alsywryqj Sspr Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This offer is for a used black-and-white production printer, the ‘Ricoh Pro 8310s’ Item for sale: 1 x Ricoh Pro 8310s with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Ppsdpsywrx Hjfx Al Sjr Meter readings: Total: Approx. 2,206,561 pages Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, mileage: 65,680 km, power: 96 kW (130.52 HP), first registration: 04/2018, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0551. GW222H01591 ---- SPECIAL EQUIPMENT Ppodsxcc Uyjpfx Al Sor - Passenger-side airbag, switchable - Air conditioning FURTHER EQUIPMENT - ABS - Storage compartments - Driver's airbag - Exterior mirrors including integrated side indicators - Mechanical brake assist - Roof light in cargo area - Double roof light in cab - Tachometer - ESP, ASR - Front electric windows - Gearbox: 6-speed manual - Rear door (double-wing), closed - Paintwork: Solid colour - Reach-adjustable steering wheel - Manual headlight levelling - Multifunction display - Particulate filter: Diesel particulate filter - Upholstery: Fabric - Radio pre-wiring (cables and antenna) - Black side protection strips - Right-hand side sliding door, without window - Power steering - Double passenger seat bench - Height-adjustable driver's seat - 12V socket in cargo area - 12V socket in centre console - Partition wall, closed - 8 lashing eyes in cargo area - Service interval indicator - Immobiliser with transponder - Heat-insulating glazing - Central locking with remote control ...and much more. ---- Vehicle is in unprepared/original condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing / Leasing possible with no down payment! Any questions? We are happy to advise you!

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Pjdjyb Rpdspfx Al Sopr Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: excellent (used), I offer a professional hydraulic rescue device from the renowned company LUKAS, model LSP 44 B. The equipment is used in rescue operations (e.g., fire brigade) and is distinguished by its very high build quality and reliability. Technical condition: The device is fully functional, tested, and ready for operation. It shows normal signs of use as visible in the photographs. Technical specifications: Manufacturer: LUKAS / FAG Kugelfischer Model: LSP 44 B Type: DSH-20-2 Podpfxoyxrbdo Al Sepr Power supply: 230 / 240 V Motor: Leroy Somer, approx. 1.1 kW Country of origin: Germany Set includes: Hydraulic power unit Hydraulic hoses Hose reel Working element as shown in the photographs Application: Technical rescue Fire services Emergency services Hydraulic work

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 FOR HELICAP 23 PRO: YOM 2019 VERSION 400v 9.000 RUNNING HOURS Ppodpjyynd Rjfx Al Sjr NEW CONDITION THE MACHINE IS IN PRODUCTION TILL MAY 15TH.

Condition: ready for operation (used), Year of construction: 2022, number of axes: 3, This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator. Additional equipment Podpfx Aleyu Immj Sopr • Material starter kit PA11 ESD BASF Machine Benefits Technical Machine Benefits • Sinterit fz154 sandblaster sls lisa, lisa pro, lisa x, nilsxyzpro mfgpro230 xs 3pl01xus00f 3d printer • Sinterit fz138/fz176 phs station 2022 incl. Separator • Interit fz101/fz188 atex vacuum cleaner 230v vacuum, accessories, powder separator • Air separator nitropur 800-pok special • Build volume: 230x230x230mm • Min. Layer thickness: 0,08mm • Max. Chamber temperature: 180°c • Operating software: buildware (control panel), slsware (slicer)

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Ppedpfx Aleywcrwe Sor Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: like new (used), Year of construction: 2019, machine/vehicle number: B0203R0016, functionality: fully functional, operating hours: 3,500 h, stroke length: 250 mm, total length: 6,000 mm, total width: 2,300 mm, total height: 3,000 mm, overall weight: 17,000 kg, controller manufacturer: TRUMPF, controller model: T3500 Touch CNC control, working width: 4,000 mm, bending force (max.): 230 t, installation height: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, lower tooling, safety light barrier, upper tooling, TRUMPF ProfiPress 230-40 Heavy Duty CNC Press Brake LOW HOURS! Pjdpfoycl U Rox Al Sopr High-performance heavy duty hydraulic press brake in excellent technical condition with very low operating hours. The machine has been fully serviced and maintained exclusively by TRUMPF from new. Equipped with TRUMPF T3500 Touch CNC control, offering fast and intuitive operation, DXF import for tools and part files, and efficient programming directly from CAD data. 4-axis CNC backgauge (X, R, Z1, Z2) with 4 backgauge fingers, allowing easy and precise part positioning, improved repeatability, and comfortable two operator bending for large or heavy parts. Integrated CNC crowning system guarantees accurate bending results over the full working length. Robust block hydraulic system and hydraulic upper beam drive make this press brake extremely powerful and reliable, suitable for continuous industrial production. Fast working speeds. Features include pneumatic uper clamping system, foot pedal operation, DXF import, and safety systems. Key advantages: – Very low operating hours – TRUMPF serviced machine, TRUMPF support. TRUMPF ProfiPress series. – 4-axis CNC backgauge with 4 fingers ideal for two-operator or long part bending – Heavy-duty, extremely rigid construction – DXF import (tools & parts) – High precision CNC crowning – Reliable ProfiPress series Delivery within Europe possible by agreement. The machine can be inspected under power by appointment.

Condition: new, For sale: high-quality electric motor from the renowned brand WEG, Premium IE3 series. The motor is new, unused, and has been stored in a warehouse – condition is very good. Ideal for pumps, fans, industrial machinery, and workshop applications. ⚙️ Technical specifications Manufacturer: WEG Model: AL90S L 02 Power: 2.2 kW Speed: 2855 rpm Voltage: 230 / 400 V Frequency: 50 Hz Podpfx Ajyvamnel Sopr Current: approx. 7.8 / 4.5 A Efficiency class: IE3 Degree of protection: IP55 Duty type: S1 Flange version: B5 Shaft diameter: approx. 24 mm Weight: approx. 22 kg Year of manufacture: 2018

Condition: new, For sale: professional MOTEK electric motor with brake. Brand-new unit, warehouse stored, never installed. Italian production – very high manufacturing quality. The motor is fitted with an electromagnetic brake – ideal for industrial applications, machinery, conveyors, pumps, and drives. Technical specifications: Ppjdpfx Aeyvadmol Ser Manufacturer: MOTEK Model: ET90SLa-2 Power: 3 kW RPM: approx. 2800 Voltage: 230 / 400 V Frequency: 50 Hz Current: 11.9 A / 6.9 A Power factor (cos φ): 0.81 Brake torque: 7 Nm Brake supply: 103 VDC / 230 VAC Duty cycle: S6 40% Weight: approx. 16.2 kg Country of manufacture: Italy Condition: New, warehouse stored Possible minor signs of storage

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Podpfsyrihgox Al Sopr Screw diameter: 60 mm, L/D = 30 Grooved feed section Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg

Condition: used, machine/vehicle number: 007470, Max. panel width: 3800 mm Max. panel length: 2200 mm Ppedpfot H Twaex Al Ssr Main saw blade projection: 130 mm No of Grippers: 7

Condition: used, machine/vehicle number: 007875, Max. panel width: 3800 mm Max. panel length: 2200 mm Main saw blade projection: 130 mm Ppodpfxewkf Axs Al Sor No of Grippers: 7

Condition: new, For sale: professional electronic circulation pump Wilo Stratos 50/1-9 – high-efficiency, energy-saving, designed for heating and cooling systems. Technical specifications Manufacturer: Wilo Psdpeyhhn Dofx Al Sopr Model: Stratos 50/1-9 Power supply: 1~ 230 V, 50/60 Hz Power: 25–490 W Current: 0.20–2.15 A Connection: DN50 (2”) Connection: flanged Operating pressure: PN6 / PN10 Protection class: IPX4D Max. medium temperature: up to 110°C Energy Efficiency Index: EEI ≤ 0.20 (ErP) Year of manufacture: 2015 Made in: Germany Condition Technically fully functional Very good visual condition Condition as shown in the photos Applications Heating systems Cooling systems Industrial and commercial buildings 📦 Possible shipping or personal collection 🧾 Invoice available 🌍 Export sales also possible

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Welding and cleaning line consisting of: double-head welding machine, automatic moving table, CNC cleaning machine. Ppodpfx Aloywcv Ns Sjr

Condition: excellent (used), mileage: 693,713 km, power: 315 kW (428.28 HP), first registration: 02/2020, fuel type: diesel, tire size: 295/80 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking air conditioner, parking heater, = Additional options and equipment = Pjdpfsx Nymvjx Al Sjpr - (Roof) spoiler - Aluminum fuel tank - Climate control - Sleeping berth - Air horn - Radio/CD player - Rear-view camera - Electrically adjustable side mirrors - Sun visor - Digital tachograph = Further information = General information Cab: sleeper (one and a half) Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 7,994 kg Axle configuration Tire size: 295/80 R22.5 Brakes: disc brakes Front axle: Max. axle load: 7,500 kg; Tire tread left: 30%; Tire tread right: 30%; Suspension: leaf spring Rear axle: Max. axle load: 12,000 kg; Tire tread left: 30%; Tire tread right: 30%; Suspension: air suspension Condition Technical condition: very good Visual condition: very good Damage: none