Used Abw Gb3A Mk3 for sale (297)

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. - Rotary cross section Hsdpfsn Hxiiex Aaiofk - cutting width max. (mm): 2100 - heating: included - cooling: included

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Hfedjharwvjpfx Aaiek Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Hfsdpfx Aaevu Dv Heisk Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: used, Year of construction: 2018, operating hours: 806 h, functionality: fully functional, total width: 2,030 mm, total length: 4,450 mm, total height: 2,090 mm, pressure: 3,000 bar, operating pressure: 3,000 bar, fuel: diesel, overall weight: 2,925 kg, water tank capacity: 150 l, volume flow: 1.08 m³/h, fuel tank capacity: 200 l, type of cooling: air, noise level: 85 dB, power: 144 kW (195.79 HP), year of last overhaul: 2026, pump capacity: 18 l/min, Equipment: rotational speed infinitely variable, type plate available, Complete unit in mobile design with soundproof enclosure + accessories, consisting of: (€7,500) 5x hose DN8-20m-3010bar-2x9/16-LH-S 6x complete connector set 9/16 4000 BAR 1x hose DN8-10m-3010bar-2x9/16-LH 1x hose DN5-5m-3010bar-9/16UNF-LH 1x compressed air line DIN10, 20m 1x high-pressure gun HP3000S-E-24V incl. body support and DSA 1x Speedy 3000 1x Orbimaster 2500 0.80-9/16-18UNF LH 1x rotary union TD3000-SCS-9/16 1x plug-in foot switch, 2-channel, 24VDC 2x cable drum with cable, 50m 2x bursting disc, operating pressure 3000bar 10x filter cartridge 1µm Hfsdpfx Ajx Svnbeaiek various nozzles

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Hfodpfx Aaezimbksisk Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max feeding speed 200 m/min • Electronic speed control 30 - 200 m/min • Max working width 250 mm • Minimum working height 12 mm • Max working height 100 mm • Spindle speed 5000 & 6000 r.p.m • Spindle diameter 50 mm. For a separate fee, it can be dismantled and loaded onto a transport vehicle. Hfedpjyzdtkjfx Aaisk

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Hfodpfxewhp N Do Aaiek

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2026, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 09/2027, working width: 300 mm, conveyor belt width: 320 mm, type of input current: three-phase, total height: 1 mm, Winding machine Model: MK 30 Dough weight up to approx. 250 grams Wrapping tape width 320 mm Plastic-coated feed rollers for all sticks such as Kornspitz and pretzel sticks, Universal winding machine Stainless steel version Input shaft with safety edge Hodpfx Ajhfhpvoaiefk DGUV V3 tested Mobile croissant wrapping machine Connection 400V, 1 kW, 16A-CEE plug Used machine overhauled with 6 months warranty Visit our large bakery machines warehouse!

Condition: good (used), Tool holder, milling holder, milling tool -Recording: MK3 -Length: 973 mm -extendable up to: 440 mm -Measurements see: drawing in the photos -Weight: 11.1 kg Hjdpfed Rz Dxox Aaisfk

Condition: good (used), Tool holder, milling tool holder -Recording: SK50 Hfjdsb D I D Depfx Aaiek -Recording tool: MK3 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 12 recordings available -Price: per piece -Dimensions: 235/95/H95 mm -Weight: 3.0 kg/piece

Condition: good (used), Year of construction: 2012, Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control from CNC machining center Santenberg GTC S 2 -Pressure switch: Parker Senso Control SCPSDControl valves: coax 5-VMK 32 NC / 1 824 210 291 -Individual components: see photos -Submission/Price: complete -Dimensions: 340/145/H510 mm -Total weight: 14.7 kg Hedpfxsktm Dus Aaiofk

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination Hjdpfx Aasin Rn Ajijfk -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: used, Tapping chucks, thread chucks, tapping chucks -with slip clutch Hfodpfeb Uhktox Aaisk -Cutting capacity: max. M16 -Recording: MK3 -Weight: 3.2 kg

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. The standard tools are listed in the attached inventory. I can send it to you via email. Hfedpfxjxurhgs Aaijk

Condition: ready for operation (used), power: 1.5 kW (2.04 HP), spindle mount: MK 3, drilling depth: 150 mm, rotational speed (max.): 790 rpm, rotational speed (min.): 155 rpm, total height: 2,200 mm, throat depth: 350 mm, overall weight: 430 kg, Column drill press, geared drill press from former Bundeswehr stock, in used, functional condition, with the usual signs of wear for its age and use, see photos. Carl Sigmund Augsburg Motor: 1.5 kW - 380 V Tool holder: MK-3 Speeds: 155 rpm - 280 rpm - 470 rpm - 790 rpm Feeds: 0.1 mm - 0.2 mm - 0.3 mm Overhang: 350 mm Drilling depth: 150 mm Table diameter: 480 mm Column diameter: 140 mm Overall height: 2.20 m Weight: 430 kg Hedpfx Aezh U Ebsaijfk No VAT applicable. Subject to differential tax according to § 25a UStG. The sale of used goods is made without any warranty or guarantee! This offer is non-binding and subject to change. Modifications, errors and prior sale are reserved.

Year of construction: 2026, condition: new, functionality: fully functional, New machine with a 24-month warranty Stainless steel model Advantages: + Mobile unit with locking castors + Completely made of stainless steel + For the production and preparation of pastry dough, baking cream, chocolate, fondant, fruit jam, coatings, fillings, as well as for any product requiring uniform heating and mixing + Thermal oil circulates in the double-walled tank, designed for safe and easy use Hjdpsivdnvofx Aaisfk + Triple-walled construction for optimal thermal insulation + With side and bottom scrapers + Electronic thermostat for setting the cooking temperature + Manual / automatic operation possible + Digital temperature display with timer + The tank can be easily tilted for emptying via a handwheel (optional: with a drain tap) + Two working speeds + Safety switch in case of overheating SPECIAL optional accessories, available at an extra cost: - Drain tap for quick and easy emptying: + €880.00 net - Machine with frequency inverter for stepless stirring speed: + €1,115.00 net - Double mixing tool for particularly homogeneous mixing: + €725.00 net - Higher temperature (instead of 150 °C, up to 180 °C possible) + €900.00 net Technical data: - Capacity: 30 liters - Max. temperature: 150 °C (optional up to 180 °C) - Thermal oil volume: 12 liters - Heating power: 4 kW - Motor power: 0.37 kW / 0.45 kW (1st / 2nd speed) - Connection values: 400 V - 3Ph - 50Hz - 16A CEE plug - Dimensions: 960 x 725 x 1530 mm (W x D x H) - Filling height: 1100 mm - Net weight: 121 kg

Condition: excellent (used), Tapping attachment Type Efem MK 3 (28520) Hjdpfet R S Avjx Aaiofk Shank diameter on tap 21 mm Automatic right - left run Total length 285 mm Diameter 109 mm Weight 7.5 kg

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), fuel type: electric, color: green, overall weight: 2,880 kg, lifting power: 2,980 kg/m, lifting height: 16,950 mm, tire size: 950 × 180 mm (rubberen rupsen), tire condition: 100 %, mast type: telescopic, Year of construction: 2024, Equipment: UVV, adjustable boom, crane, hydraulics, low noise, onboard computer, rubber tracks, === KEY SPECIFICATIONS === Year of manufacture: 2024 Operating hours: New Max. lifting capacity: 2,980 kg (at 1.8 m) / 1,000 kg (at 4.7 m – jib) Max. lifting height: 16.95 m Max. working radius: 14.3 m Drive system: Fully electric (battery powered) Remote control: Yes (radio remote, proportional) Jib: Included (3-section, hydraulic telescopic) Attachments / additional equipment: Hydraulic winch, hydraulic telescopic jib, remote control, LED work lights, safety valves, tilt alarm, datalogger, non-marking rubber tracks Track type: Rubber tracks (non-marking) Hsdpfx Aoxg A Ibeaiefk Track size: 950 × 180 mm Track condition: New Weight: approx. 2,875 kg CE certification: Yes === HIGHLIGHTS === Fully electric mini crawler crane (zero emission) Ideal for indoor and emission-restricted environments Low noise operation Fully automatic 5-section telescopic boom 360° continuous slewing with precise control Fully variable hydraulic outriggers Low ground pressure, suitable for sensitive surfaces CE certified and ready for immediate use === CONDITION === New machine – factory condition, unused and immediately available. Fully tested and inspected. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price: €149,500 (EXW / excluding VAT) The Maeda MK 3053 CB is a compact and powerful fully electric mini crawler crane, offering a maximum lifting height of 16.95 metres and a lifting capacity of up to 2.98 tonnes. Thanks to its battery-powered electric drive system, this crane is perfectly suited for indoor applications and environments with strict emission requirements. Its compact dimensions and precise radio remote control make the MK 3053 CB ideal for installation, glazing and maintenance work where precision, low noise and zero emissions are essential. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to destination and logistical requirements. All transport is handled professionally by the Collé Rental & Sales logistics team.

Condition: new, functionality: fully functional, fuel type: hybrid, color: blue, overall weight: 2,900 kg, empty load weight: 2,900 kg, operation weight: 2,900 kg, lifting power: 2,980 kg/m, tire condition: 100 %, Year of construction: 2024, operating hours: 1 h, Equipment: adjustable boom, crane, hydraulics, low noise, onboard computer, rubber tracks, 🔧 Key Specifications: • Year: 2024 Hfedpfsy Hqhrox Aaisk • Operating hours: 1 h (NEW) • Max capacity: 2,980 kg (main boom) / 1,000 kg (with jib) • Max lifting height: 16.95 m (with jib) / 12.0 m (main boom) • Max working radius: 14.3 m • Power: Bi-energy (diesel + electric + battery) • Remote control: Fully proportional radio control • Hydraulic winch: Yes • Jib: Hydraulic telescopic jib included • Undercarriage: Variable crawler gauge • Outriggers: Automatic multi-position outriggers • Tracks: Rubber tracks (non-marking) • Weight: approx. 2,900 kg • CE certification: Yes ✨ Highlights: ✅ Bi-energy spider crane (diesel + electric operation) ✅ Suitable for indoor & zero-emission working ✅ Fully proportional remote control ✅ Hydraulic winch for precise lifting operations ✅ Hydraulic telescopic jib for extended reach ✅ Variable crawler gauge for maximum stability ✅ Automatic multi-position outriggers ✅ Compact design for confined spaces ✅ Ready for immediate deployment ⚙️ Condition: New machine — never used. Factory-new condition with full inspection and CE certification. 🌍 Location & Price: 📍 Sittard, Netherlands 🚚 Worldwide delivery available 💰 Price: €119,500 (EXW / excl. VAT) 🚚 Delivery: • Crane loading available • Flexible transport options • Handled by Collé Rental & Sales logistics

Condition: excellent (used), HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Hfjdpoxphnlsfx Aaisk Position 8: CRANE

Condition: new, Year of construction: 2026, - Stepless speed control - Quickly adjustable drill depth stop - Thread cutting device - Undervoltage protection - Table height adjustment via rack and pinion - LED lighting in the head - Continuous/normal drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Overhang 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): Number 2, spacing 125 mm - Speed display: Digital - Drilling depth display: Digital - Quickly adjustable drill depth stop - Manual feed - Motor: Three-phase 400 V - Spindle speeds, stepless: 30 - 3,000 rpm Optional drilling package 3, consisting of: - Machine vise [felix] 2.0 100 mm - Quick-change drill chuck 3-16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 € 485.00 Optional: Coolant system: € 620,- FACTORY WARRANTY: 3 years DELIVERY: Free to your doorstep, including packaging Hfjdpod Nk S Iofx Aaiek NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DEALER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Cutting device Programmable drilling depth shut-off Drilling depth and speed display – digital Threading device M20 (dependent on pitch) Hfedpfx Aaod H Rgfsijk Continuously variable speed from 125 – 4000 rpm in two stages, stage change via belt deflection. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Overhang 280 mm Usable table surface (swiveling) 420 x 340 mm Feed 0-300 mm/min, continuously variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor, three-phase, 400 V, pole-changing, 0.9/1.45 kW Weight 300 kg OPTION: - Drilling kit 5 consisting of: taper arbor, drill chuck, vice, and T-slot set (€845) - Spindle stop and chip breaker module (€864) DELIVERY: free to your door including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Drilling depth and speed indicator – digital Thread cutting capacity M20 (depending on pitch) Continuously variable speed from 125 - 4000 rpm in two stages, stage change via belt deflection. Drilling capacity 25/30 mm Thread cutting capacity (depending on pitch) M20 Spindle MK 3 Drilling depth 125 mm Overhang 280 mm Usable table surface (swiveling) 420 x 340 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Hedpfx Aaed H Rffsisfk Motor – three-phase 400 V, pole-changing 0.9 / 1.45 kW Weight 275 kg OPTION 1 - € 625.00 Drilling package 4 consisting of: - Vise [felix] 2.0 - 120 mm, clamping width 0-168 mm - Quick-change drill chuck, mount B18, 3-16 mm (accuracy 0.17 mm) Tapered arbor MK 3 B18 and reducing sleeve MK3 to MK 2, as well as MK 3 to MK 1 OPTION 2 - € 1,245.00 Threading unit, max. M20, adjustment of the thread cutting depth via digital depth display Delivery: FREE DELIVERY including packaging Factory warranty: 3 years NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Standard Equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/Normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Overhang: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Hodpfx Aefmh Tljaiofk Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without extra charge Extra charge for R3: € 1,700,- Accessories: Coolant system (€ 620,-) - Separate container - Filling volume: max. 15 l - Delivery rate max. 13.4 l/min Accessories: Drilling package 5 (€ 875,-) - Vise [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Quick-change drill chuck B18 3-16 mm (Accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door incl. packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1 = M30x3.5 / R2 = M24x3 / R3 = M36x4 Spindle MK IV Drilling depth: 160 mm Overhang: 300 mm Column diameter: 140 mm Usable table surface (W x D): 590 x 450 mm Hfedpfolfdufjx Aaiok Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without additional charge Additional charge for R3: € 2,250 Accessories drilling package 6 (€ 910.00) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: Free to your site including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!