Used Aichelin Continuous Pusher-Type Furnace System for sale (70,772)

Condition: new, Lateral guide, type ZF 201, 90° bend, on both sides. * Galvanized U-profile * Other technical characteristics: surface: galvanized * Bend: 90° Bend: 90° Surface: galvanized Kodpo Abu Akofx Ahionc Design: on both sides.

Condition: new, Ball table, type AD 115, straight, 0.5 m, pitch 100 mm, roller track B.300 mm * For installation between roller and small roller tracks at distribution, turning, or sorting points, as well as for use as independent work tables * When used in conjunction with roller and small roller tracks, the side profiles are adapted to the respective system * Ball tables are manufactured in any desired size and ball pitch, as well as for heavy loads; therefore, please always specify the required load-bearing capacity * Supports: for heavy tables or special sizes, available upon request * In conjunction with light roller tracks, see table * Design: Tabletop made of 4 mm thick steel sheet, additionally reinforced with struts. Ball rollers Ø 15 mm, housing galvanized, load-bearing capacity of the loose ball roller 50 kg, ball rollers Ø 22 mm available upon request Knjdpfx Ae Abu A Dehisc * Coating: blue, RAL 5015. Note: The conveyed goods must have a dimensionally stable, flat, closed, and clean base. * Other technical specifications: Overall width: 340 mm Overall width: 340 mm Pitch (axle distance): 100 mm Size: Straight 0.5 m Track width: 300 mm

Condition: new, Ball table, type AD 115, track width 500 mm, straight 1 m, pitch 75 mm · For installation between roller and small roller conveyors at distribution, turning, or sorting points, as well as a stand-alone work table · In conjunction with roller and small roller conveyors, the side profiles are adapted to the respective system · Ball tables are manufactured in any desired size and ball pitch, as well as for heavy loads; therefore, please always specify the required load-bearing capacity Kodpfxj Abu D Ie Ahijnc · Supports: for heavy tables or special sizes, available upon request · In conjunction with light roller conveyors, see table · Design: Tabletop made of 4 mm thick steel sheet, additionally supported by bracing. Ball rollers Ø 15 mm, housing galvanized, load-bearing capacity of the loose ball roller 50 kg, ball rollers Ø 22 mm available upon request · Coating: blue, RAL 5015. Note: The conveyed material must have a dimensionally stable, flat, closed, and clean base. · Other technical features: Overall width: 540 mm Track width: 500 mm Pitch (center distance): 75 mm Size: Straight 1 m Overall width: 540 mm

Condition: new, Ball table, type AD 115, straight, 0.5 m, pitch 100 mm, lane width 500 mm · For installation between roller and small roller conveyors at distribution, turning, or sorting points, as well as for use as independent work tables. Kodpfo Abu D Uox Ahienc · When used in conjunction with roller and small roller conveyors, the side profiles are adapted to the respective system. · Ball tables are manufactured in any desired size and with any desired ball pitch, and can also be designed for heavy loads; therefore, please always specify the required load-bearing capacity. · Supports: for heavy tables or special sizes, available upon request. · For use with light roller conveyors, see table. · Design: Tabletop made of 4 mm thick steel sheet, additionally reinforced with bracing. Ball rollers Ø 15 mm, housing galvanized, load-bearing capacity of individual ball roller 50 kg, ball rollers Ø 22 mm available upon request. · Painting: blue, RAL 5015. Note: The conveyed material must have a dimensionally stable, flat, closed, and clean bottom surface. · Other technical features: Overall width: 540 mm Size: Straight, 0.5 m Pitch (center distance): 100 mm Lane width: 500 mm Overall width: 540 mm

Condition: new, Filter pressure regulator, type 480-variobloc, 19.17 BG II, G 1/2 inch · (Diaphragm design) Knedpo Abxgtsfx Ahiec · With return flow control · Manual drain · Internal thread Filter fineness: (Sintered filter) 40 µm Thread: G 1/2? Model: BG II Ambient temperature: max. +50 °C Housing: Polycarbonate Thread mm: 12.7 mm Flow rate at 6 bar: 5500 Nl/min Control range: 0.5-10 bar Housing: Zinc die-cast

Condition: new, Maintenance unit, type 488-variobloc, connection G 1/4 inch, consisting of 2 parts, 1500 Nl/min, EWO · Two-part – consisting of: filter pressure regulator (manual drain) and mist lubricator · With polycarbonate container · Internal thread · Further technical characteristics, drain valve: manual · Container: Polycarbonate Drain valve: manual Ambient temperature: max. +50 °C Thread size (mm): 6.4 mm Container: Polycarbonate Model: BG I Control range: 0.5 - 10 bar Thread: G 1/4? Internal thread size (mm): 6.4 mm Filter fineness: 40 µm Flow rate at 6 bar: 1500 Nl/min Pre-pressure (P1): max. 16 bar Internal thread: G 1/4? Knjdpfx Aho Abxf Neioc Housing: Zinc die-cast

Condition: new, Maintenance unit, type 488-variobloc, G 3/8 inch, I, 2-part, 1800 Nl/min, EWO · Two-part – consisting of: filter pressure regulator (manual drain) and mist lubricator · With polycarbonate container · Internal thread · Other technical features, drain valve: manual · Container: Polycarbonate Ambient temperature: max. +50 °C Initial pressure (P1): max. 16 bar Control range: 0.5 - 10 bar Thread mm: 9.5 mm Kodpfj Abxgajx Ahijnc Internal thread: G 3/8 ? Container: Polycarbonate Flow rate at 6 bar: 1800 Nl/min Drain valve: manual Model: BG I Filter fineness: 40 µm Housing: Zinc die-cast Internal thread mm: 9.5 mm Thread: G 3/8 ?

Condition: new, Support, type U1, rail height 550-850 mm, width 800 mm · For stationary installation · Square tube construction · Telescoping support feet Knodpfxe Abwhco Ahioc · Painted in RAL 5015 · Height specifications include the roller track · Other technical specifications: width: 800 mm Width: 800 mm Rail height: 550-850 mm

Condition: new, Support, Type U1, rail height 680-1100 mm, width 600 mm · For fixed installation · Square tube construction · Telescoping support feet Kodo Abwh Nopfx Ahienc · RAL 5015 paint finish · Height specifications include roller track · Further technical specifications: width: 600 mm Width: 600 mm Rail height: 680-1100 mm

Condition: new, Support type U1, rail height 680-1100 mm, width 900 mm · For stationary installation · Square tube construction · Telescoping support feet Knjdpfs Abwigjx Ahiec · Painted RAL 5015 · Height specifications include the roller track · Other technical specifications: width: 900 mm Width: 900 mm Rail height: 680-1100 mm

Condition: new, Support, type U1, rail height 680-1100mm, width 1000mm · For stationary installation · Square tube construction · Telescoping support feet · Painted in RAL 5015 · Height specifications include the roller track Kjdpfx Ahs Abwimoienc · Other technical specifications: width: 1000mm Rail height: 680-1100 mm Width: 1000 mm

Condition: new, Spiral drill bit, DIN 345, Type N, D.23.5mm, HSS-Co5, ground flute, MK3, RUKO · HSS-Co5 · DIN 345 · Type N · Point angle 118° · Right-hand cutting · Tapered shank · Pointed transverse cutting edge according to DIN 1412 A · High-performance standard drill bit made of cobalt-alloyed HSS with increased hot hardness · Ideal for drilling difficult-to-machine materials and for the highest loads · Applications: for alloyed and unalloyed steel and steel castings (tensile strength over 900 N/mm²), grey cast iron, tempered cast iron, high-chromium alloyed steels such as V2A and V4A, rust and acid-resistant steels · Further technical specifications: feed rate in steel up to 800 N: 0.15mm/rev · Shank size: MK3 · Quality: ground flute Overall length: 276 mm Nominal diameter: 23.5 mm Type: N Morse taper: 3 Knodpfx Ahj Abyyuoioc DIN: 345 Point angle: 118° Spiral length: 155 mm Cutting material: HSS-Co5

Condition: new, Spiral drill bit DIN 345, type N, D.25.5mm, HSS-Co5, ground profile, MK3, RUKO Kjdps Abyzxofx Ahionc · HSS-Co5 · DIN 345 · Type N · Point angle 118° · Right-hand cutting · Tapered shank · Pointed transverse cutting edge according to DIN 1412 A · High-performance standard drill bit made of cobalt-alloyed HSS with increased hot hardness · Ideal for drilling hard-to-machine materials and for high stress applications · Areas of application: for alloyed and unalloyed steel and cast steel (tensile strength over 900 N/mm²), gray cast iron, tempered cast iron, high-chromium alloyed steels such as V2A and V4A, rust and acid-resistant steels · Other technical characteristics: feed rate in steel up to 800 N: 0.15 mm/rev · Shank size: MK3 · Quality: ground profile Cutting material: HSS-Co5 Point angle: 118° DIN: 345 Overall length: 286 mm Nominal diameter: 25.5 mm Morse taper: 3 Spiral length: 165 mm Type: N

Condition: new, Spiral drill bit, DIN 345, Type N, D.26mm, HSS-Co5, profile ground, MK3, RUKO · HSS-Co5 · DIN 345 · Type N · Point angle 118° · Right-hand cutting Keds Abyz Ejpfx Ahijnc · Taper shank grind · Pointed transverse cutting edge according to DIN 1412 A · High-performance standard drill bit made of cobalt-alloyed HSS with increased hot hardness resistance · Ideal for drilling difficult-to-machine materials and for high stress applications · Application areas: for alloyed and unalloyed steel and steel castings (tensile strength over 900 N/mm²), gray cast iron, chilled cast iron, high-chromium alloyed steels such as V2A and V4A, rust and acid-resistant steels · Further technical properties: feed rate in steel up to 800 N: 0.15 mm/rev · Shank size: MK3 · Quality: profile ground Type: N Spiral length: 165 mm Cutting material: HSS-Co5 Nominal diameter: 26 mm DIN: 345 Point angle: 118° Overall length: 286 mm Morse taper: 3

Condition: new, Spiral drill bit, DIN 345, Type N, D.28.5mm, HSS-Co5, ground, Morse taper MK3, RUKO · HSS-Co5 · DIN 345 · Type N · Point angle 118° Ksdpfx Aho Aby Avjionc · Right-hand cutting · Conical shank grind · Pointed transverse cutting edge according to DIN 1412 A · High-performance standard drill bit made of cobalt-alloyed HSS with higher hot hardness resistance · Ideal for drilling difficult-to-machine materials and for high stress applications · Application areas: for alloyed and unalloyed steel and steel castings (tensile strength over 900 N/mm²), grey cast iron, tempered cast iron, high-chromium alloyed steels such as V2A and V4A, rust- and acid-resistant steels · Other technical properties: feed rate in steel up to 800 N: 0.15mm/rev · Shank size: MK3 · Quality: ground Point angle: 118° Type: N Cutting material: HSS-Co5 Overall length: 296 mm DIN: 345 Nominal diameter: 28.5 mm Morse taper: 3 Spiral length: 175 mm

Condition: new, Spiral drill bit DIN 345, Type N, D.29mm, HSS-Co5, ground profile, MK3, RUKO · HSS-Co5 · DIN 345 · Type N · Point angle 118° · Right-hand cutting · Taper shank grind · Pointed transverse cutting edge according to DIN 1412 A · High-performance standard drill bit made of cobalt-alloyed HSS with increased hot hardness resistance · Ideal for drilling hard-to-machine materials and for high stress applications · Applications: for alloyed and unalloyed steel and cast steel (tensile strength over 900 N/mm²), grey cast iron, tempered cast iron, high-chromium alloyed steels such as V2A and V4A, rust and acid-resistant steels · Other technical properties: feed rate in steel up to 800 N: 0.15mm/rev · Shank size: MK3 · Quality: ground profile Type: N Overall length: 296 mm Morse taper: 3 DIN: 345 Spiral length: 175 mm Point angle: 118° Cutting material: HSS-Co5 Kedpfx Ahs Aby A Aoijnc Nominal diameter: 29 mm

Condition: new, Spiral drill bit, DIN 345, Type N, D.29.5mm, HSS-Co5, profile ground, MK3, RUKO · HSS-Co5 · DIN 345 · Type N · Point angle 118° · Right-hand cutting · Tapered shank · Pointed transverse cutting edge according to DIN 1412 A · High-performance standard drill bit made of cobalt-alloyed HSS with increased hot hardness resistance · Ideal for drilling difficult-to-machine materials and for the highest loads · Application areas: for alloyed and unalloyed steel and cast steel (tensile strength over 900 N/mm²), grey cast iron, ductile iron, high-chromium alloyed steels such as V2A and V4A, corrosion-resistant and acid-resistant steels · Other technical characteristics: feed rate in steel up to 800 N: 0.15mm/rev Knjds Aby A Nepfx Ahijc · Shank size: MK3 · Quality: profile ground Type: N Morse taper: 3 Spiral length: 175 mm Cutting material: HSS-Co5 Point angle: 118° Overall length: 296 mm Nominal diameter: 29.5 mm DIN: 345

Condition: new, Spiral drill bit, DIN 345, Type N, D.26.5 mm, HSS-Co5, ground, Morse taper MK3, RUKO · HSS-Co5 · DIN 345 · Type N · Point angle 118° · Right-hand cutting · Conical shank grinding · Pointed transverse cutting edge according to DIN 1412 A · High-performance standard drill bit made of cobalt-alloyed HSS with increased hot hardness resistance · Ideal for drilling hard-to-machine materials and for high stress applications · Applications: for alloyed and unalloyed steel and steel castings (tensile strength over 900 N/mm²), grey cast iron, tempered cast iron, high-chromium alloyed steels such as V2A and V4A, corrosion-resistant and acid-resistant steels Kjdpfxs Abyz Sj Ahijnc · Other technical features: feed rate in steel up to 800 N: 0.15 mm/rev · Shank size: MK3 · Quality: ground Type: N DIN: 345 Nominal diameter: 26.5 mm Spiral length: 165 mm Point angle: 118° Cutting material: HSS-Co5 Morse taper: 3 Overall length: 286 mm

Condition: new, Voltage/Continuity Tester DUSPOL® dig.1-1000 V AC/1-1200 V DC · With digital display, with resistance/frequency range · Voltage testing from 1 V - 1000 V AC TRUE RMS / 1200 V DC (LCD) · Optical, acoustic continuity testing up to 100 kΩ (yellow LED) · Resistance measurement 0.1 kΩ - 300 kΩ (LCD) · Diode testing 0.3 V - 2 V (LCD) · Rotating field direction (green LED), phase testing (red LED) · Polarity testing (LCD) · Frequency measurement 1 Hz - 1000 Hz Knode Ab Dkdopfx Ahijc · Direct display without button operation (high resistance) · Load application via push button (low resistance) · Intentional triggering of the RCD (residual current device) · Vibration alarm · Measurement point and display illumination · Cable break detector · Protection class IP65 (dustproof/protected against water jets) · Housing with rubberized grip area · CAT IV 600 V, CAT III 1000 V · Incl. 2 batteries (voltage display from 50 V even with empty batteries!) · Approved according to DIN EN 61243-3, VDE · Further technical features: operating mode: two-pole · Protection class: IP65 · Continuity test: LED/buzzer Nominal voltage range: 12 - 1000 AC TRUE RMS / 1200 DC

Condition: new, Premium diesel tank system, 1000 liters, H1800 x W1200 x L800 mm, with pump and dispensing nozzle, CEMO * Complete with 230 V electric pump and automatic dispensing nozzle with nozzle holder * Integrated hose reel with 8 m filling hose Knsdpfe Acracsx Ahijc * Counter K33 * Filter with water separator Width: 1200 mm Length: 800 mm Capacity: 1000 l Features: with pump and dispensing nozzle Height: 1800 mm Weight: 170 kg Flow rate: 56 l/min

Condition: new, Safety cabinet, type 30, H1947 x W564 x D620 mm, anthracite gray/light gray, all-metal doors, ASECOS · For safe and compliant storage of flammable hazardous substances according to DIN 14470-1 and TRGS 510. Fire resistance of 30 minutes, GS-tested. · Extremely durable. Internal width: 450 mm Weight: 146 kg External depth: 620 mm Doors: light gray Collection volume: 23 l Body: anthracite gray Internal height: 1626 mm Internal depth: 519 mm Ksdps Acugfofx Ahienc External height: 1947 mm External width: 564 mm

Condition: new, Safety cabinet, type 90, H1935 x W1190 x D598 mm, light grey/narcissus yellow, all-metal doors · Complete with 1 base pan, 33-liter collection volume · 1 perforated cover as the first storage level and 2 shelves · Door hinge on the right side according to DIN standard (left-hand hinge available on request) External depth: 598 mm Design: Steel sheet Internal depth: 430 mm Body: light grey, RAL 7035 Internal height: 1700 mm External width: 1190 mm Variant: 2 Internal width: 1087 mm Number of shelves: 3 Knedpo Act Ihsfx Ahijc Doors: narcissus yellow, RAL 1007 Weight: 505 kg External height: 1935 mm

Condition: new, Safety cabinet, type 90, H1953xW1193xD615mm, anthracite gray/gentian blue, all-metal doors, TSA · For safe and compliant storage of flammable hazardous materials according to DIN EN 14470-1 and TRGS 510 · Fire resistance of 90 minutes, GS-tested Knjdpfx Ahs Act S Heisc · ex Internal depth: 522 mm Doors: gentian blue, RAL 5010 Body: anthracite gray, RAL 7016 Weight: 424 kg External height: 1953 mm External width: 1193 mm Collection volume: 33 l Internal width: 1050 mm Internal height: 1647 mm External depth: 615 mm

Condition: new, Safety cabinet, type 90, H1315 x W1190 x D598 mm, light gray/narcissus yellow, all-metal doors · Complete with 1 drip tray, 33-liter collection volume · 1 perforated cover as the first storage level and 2 shelves · Door hinge on the right, as per DIN standard (left-hand hinge available upon request) Doors: narcissus yellow, RAL 1007 Internal depth: 430 mm Internal width: 1087 mm External depth: 598 mm External height: 1315 mm Internal height: 1080 mm Ksdj Act I Ijpfx Ahionc External width: 1190 mm Number of shelves: 2 Weight: 380 kg Casing: light gray, RAL 7035

Condition: new, Safety cabinet, type 90, H1953 x W599 x D615 mm, anthracite gray/light gray, all-metal doors, TSA · For the safe and compliant storage of flammable hazardous materials according to DIN EN 14470-1 and TRGS 510 · Fire resistance of 90 minutes, GS-tested · Extra External width: 599 mm Internal depth: 522 mm Body: anthracite gray, RAL 7016 External depth: 615 mm Internal height: 1647 mm Internal width: 450 mm Doors: light gray, RAL 7035 Collection volume: 22 l Knjdpfx Ahj Act R Ajiec Weight: 265 kg External height: 1953 mm