Used Aichi Sr18A 2005 for sale (1,183)

Condition: excellent (used), Year of construction: 2007, Fanuc R2000iB/210F, 20% discount when ordering more than one robot. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH was founded in 2005 in Gütersloh. Since 2015, GSG Robotics GmbH has been based in Marl, with a large service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Nwjdpfxoz Tafvo Ai Ton

Condition: excellent (used), Year of construction: 2021, operating hours: 2,600 h, ABB IRB4600-45/2.05 robot and IRC5 controller-TPU-RW6.X DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Njdpfoz Tab Djx Ai Tswn

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B + Trackmotion 2.9 meters, complete, like new, DTC 7 hours, 2019 DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Nwsdpfx Aijz Tacno Ton

Condition: used, Year of construction: 2005, New RVS 520 hammer mill: Year of manufacture 2005, (motor type Y 160 M, 400 V), with switchgear cabinet. Nwsdpfs Afk Hysx Ai Ten

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Fully Refurbished – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005, which is undergoing a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good condition, both technically and aesthetically, and will be prepared for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Fully Refurbished Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Working Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 is undergoing a comprehensive and professional overhaul in our facility. During the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally refurbished or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire working tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul ## Quality Control and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality control. This includes, in particular, a detailed erosion test according to the quality and testing specifications of OPS INGERSOLL. The relevant machine functions, as well as accuracy and process reliability, will be checked. ## Ready for Production After Overhaul Nwedpfoz Atdrjx Ai Tjn After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit is immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large working area, the machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively refurbished wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability. 10/16.

Condition: used, Year of construction: 2005, turning length: 1,000 mm, turning diameter: 380 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 1,085 mm, overall weight: 5,200 kg, bar passage: 65 mm, CNC Lathe Manufacturer: MAZAK Model: QTN 200M 1000L Year of manufacture: 2005 Control system: MAZATROL 640T NEXUS Technical details: Turning diameter: 380 mm Max. swing diameter: 675 mm Turning length: approx. 1,000 mm Bar capacity (spindle bore): 65 mm X-axis: 230 mm Z-axis: 1,085 mm Spindle speed: 5,000 rpm Number of tool stations: 12 positions Weight (approx.): 5,200 kg Operating hours approx. 5,954 h Nwedpfez S N Iqox Ai Tsn Condition: Used The machine does not include a chip conveyor! Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications, errors in technical data/specifications, and prior sale!

Condition: used, Year of construction: 2005, DAMMANN ANP 5056, Profi-Class, Year of Manufacture: 2005, Capacity: 5,000 liters, Working width: 33.00 m, Operating hours: 38,609 hectares, 2,943 hours, 11 partial widths, K80 hitch, hydraulic embankment steering, tires: 520/85R46, air brake system, LOAD SENSING, ISOBUS, operator terminal: DAMMANN BASIC terminal with Müller S-Box and joystick, pump: ANNOVI REVERBERI AR 320 BP, tandem nozzle carrier, DCD-DISTANCE CONTROL DAMMANN, PTO shaft. Offered price including 19% VAT. The location may change; please inquire about the current location before visiting. Subject to change, errors and prior sale. Nwodpfxs Ad Aiko Ai Ton

Condition: excellent (used), Year of construction: 2005, Shinohara 75 V H Year: 2005 Counter: 21 million 5 colors Maximum format: 520 x 750 mm Maximum plate format: 745 x 605 mm Thickness: 0.04–0.60 mm Maximum speed: 16,000 sheets/hour Double impression cylinder CIP 3 IR Powder sprayer Alcohol-based dampening system Baldwin cooling and circulation system High-pile delivery Nodpfo Adzgujx Ai Town Remote ink fountain control Semi-automatic plate changing (Autoplate) Automatic washing of rollers and rubber blankets

Condition: used, Automatische Taschenfalzmaschine MBO T800.1-78/6-4 AUT mit Palettenanleger, ideal, um aus der Druckmaschine direkt in die Falzmaschine reinzufahren. Automatic Buckle Folder MBO T800.1-78/6-4 AUT with a pallet feeder it is perfect to move directly from the printing machine into the pallet feeder.  Automatische Taschenfalzmaschine / Automatic Buckle Folder MBO T800.1-78/6-4 AUT Baujahr / Year 2005 - Serial-No. 1124239 Nodps Ad Iyusfx Ai Town Palettenanleger / Pallet Feeder Falztyp  6 Taschen - 4 Taschen / Folding Type 6 Buckles - 4 Buckles Automatische Falztaschen / automatic buckles Navigator Control Stehendbogenauslage / Vertical stacker delivery SBAP 46 ME SN. 1224254 Inklusive Kompressor / Include Compressor 1 Jahr alte SoftPU-Walzen / 1 year old Soft-PU Rollers. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Nedpjzk N S Usfx Ai Tewn Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2005, operating hours: 8,888 h, * Type: Paus AKR 242 Nedpfx Aowdllaoi Town * Year of manufacture: 2005 * Power: 50 kW -----Internal vehicle number: 10919----Subject to errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, - *Type: EJC 16* - *Serial number: 90159353* - *Year of manufacture: 2005* - *Load capacity: 1600 kg* - *Load center: 600 mm* - *Battery voltage: 24 V* - *Unladen weight without battery: 1073 kg* (weight without battery) - *Battery weight: 230/255 kg* (depending on type) *Meter/display:* - *5124.1 hours* - which is low for a 2005 model! (average 250 hours/year) Nwsdpfjz Hmk Rox Ai Ten - *Battery at 100%* - all green bars lit up in your photo - Key present, no STOP fault - This proves the battery holds its charge *Green charger:* - *Type: HF MINI SW2A M24/30* - *S/N: 14009996* - *Output: 24V / 30A* - *Capacity: 150 ÷ 300 Ah* - perfect for EJC 16 - *Input: 230V single-phase - 50/60 Hz - 1.02 kW* - *Fuse D 40A - CE* - Black T-bar plug supplied - connected to 220V household outlet *Machine in the photo:* - 2600mm duplex mast (you can see the new plexiglass) - Long 1150mm forks with yellow pads - Fork carriage + rollers under the forks - Ergonomic Jungheinrich steering wheel with anti-crush protection (red button), green trigger for direction - Red emergency stop button on the hood ACTUAL VALUE with this evidence: With 5124 hours + 100% battery + HF MINI charger + clean condition as shown in your photos:

Condition: used, functionality: fully functional, Year of construction: 2005, load capacity: 1,000 kg, lifting height: 1,650 mm, Electric Stacker JUNGHEINRICH type EMC B10 Nwedpfxsz Nycme Ai Tjn Year of construction: 2005 Maxi loading capacity: 1000 KG Centre of gravity: 600 mm Maximum width of the lower forks: 1250 mm Total length of the lower forks: 960 mm Equipped with new batteries (October 2024) Length: 1500 mm Width: 1250 mm Total Lift height: 1650 mm Weight: approx. 500 kg

Condition: good (used), functionality: fully functional, Year of construction: 2005, Mechanical oscillating shear Manufacturer: Schröder, Type: MSS 1250 x 5.0 Year of manufacture: 2005 Technical data Nwedpfx Aiez Ny I Ns Tsn Manufacturer: Schröder Type: MSS 1250 x 5.0 mm Year of manufacture: 2005 Useful length: 1250 mm Sheet thickness: 5.0 mm Stroke rate: 32/min (only in continuous stroke) Rated power: 17.0 kVA Cutting angle: 1.7° Dimensions: L 2.00 x W 2.0 (plus angle stop) x H 1.50 m Weight: approx. 2.7 t Equipment - Continuous, pneumatic clamping beam with hard rubber strip - Manual rear stop 750 mm - Angle stop - Support arms - Manual adjustment of the cutting gap - Cutting edge lighting - Foot switch All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, mileage: 669,815 km, power: 170 kW (231.14 HP), first registration: 09/2005, fuel type: diesel, next inspection (TÜV): 03/2026, gearing type: mechanical, emission class: euro3, number of seats: 2, total length: 7,390 mm, total width: 2,550 mm, total height: 3,410 mm, loading space length: 5,200 mm, loading space width: 2,550 mm, loading space height: 2,150 mm, Year of construction: 2005, Mercedes-Benz Atego 823 * 09/16/2005 * Manual transmission * Diesel * EURO 3 * 2 sleeper berths * 669,815 km Nwjdpfx Aiez N Nf Ro Tsn * 170 kW * EURO 3 * Air suspension * All information provided without warranty.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, number of axes: 5, This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Machine with nc rotary table and tool magazine for 60 tools: approximately 9610 kg • Belt filter system 900 l: approximately 850 kg Nedez I N E Topfx Ai Tswn • Installation weight of machine with max weight for workpiece, tools, and operating materials, belt filter system: maximum 11500 kg • B-axis complelty overhauled Extra Information Machine still under power // Contril unit: Heidenhain: MILL PLUS 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery. 900 liter cooling water tank with belt filter

Condition: ready for operation (used), Year of construction: 2005, Make: DMG Type of machine: DMC 60 T Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Machine's weight: ca. 9 t Tool holder: SK 40 x-travel: 780 mm y-travel: 560 mm z-travel: 560 mm Njdpfx Aiez I Rfho Tjwn Speed range: 12.000 1/min Number of tools in the magazine: 120 Pl. Internal coolant supply: 40 bar. 3D Measuring probe: Heidenhain TS641 : 360 ° : x

Condition: good (used), empty load weight: 900 kg, Year of construction: 2007, Humbaur HUT 2005 machine trailer | Year of manufacture 2007 | 2,600 kg payload Nwsdpfx Aez N Uqfei Tsn For sale: a Humbaur HUT 2005 machine transporter. A robust and reliable trailer, ideal for transporting mini excavators, loaders, aerial platforms, machines, and other equipment. Thanks to the spacious loading platform and high payload capacity, this trailer is suitable for both professional and private use. Specifications Brand: Humbaur Type: HUT 2005 Year of manufacture: 2007 Internal dimensions of loading platform: 430 x 210 cm Overall dimensions: 578 x 226 cm 2 axles Payload capacity: 2,600 kg Maximum design speed: 100 km/h The trailer has recently been inspected, is in good condition, and is ready for immediate use. New hydraulic pump. €4,350 excluding VAT. Viewings are possible by appointment. Bosmans Machines B.V. No nonsense, quick delivery!

Year of construction: 2005, condition: excellent (used), ambulance class 3A Nsdpegv U S Asfx Ai Tjwn year of production 2005

Condition: used, Year of construction: 2005, functionality: unexamined, Equipment: CE marking, Belt grinding machine Manufacturer: Falcioni Type: Profitech Plus 5 Year of manufacture: 2005 1 belt grinding unit, swiveling 4 brush grinding units, swiveling Nwsdpfx Aiez Ritqj Tjn Conveyor belt width approx. 75 mm Dimensions approx. 5000 x 1700 x 2300 mm (L x W x H)

Condition: good (used), Year of construction: 2005, operating hours: 8,167 h, lifting height: 4,210 mm, fuel type: electric, mast type: duplex, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Year of manufacture: 2005 Empty weight: 5.400 kg Lifting capacity: 3.000 kg Number of valves: 3 CE mark: yes Technical condition: good Visual appearance: good Mast type: duplex = Additional options and accessories = Nwedpfsz I Ak Njx Ai Ton - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Forklift weight class: 1928 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2005, CNC Horizontal Machining Center OKUMA MA-400H (Year 2005) Condition: Good, the machine is connected and can be seen in operation. Manufacturer: OKUMA Corporation (Japan) Model: MA-400H Year of manufacture: 2005 Scope of supply: Complete with Tsubakimoto / Mayfran Inc. chip conveyor and full assembly system. High-class CNC horizontal machining center designed for precise milling, drilling, and tapping of metal parts. An excellent choice for series production where performance, accuracy, and reliability are critical. Main technical specifications: (based on OKUMA MA-400H model specification) Control system: OKUMA OSP-E100H Nodpfexql Dajx Ai Tswn Working travel (X / Y / Z): 560 × 560 × 625 mm Table: 400 × 400 mm (2-position pallet changer) Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Max. table load: 400 kg Spindle speed: up to 15,000 rpm Spindle taper: BT40 Spindle motor: 15/11 kW Tool changer: 60 positions (automatic) Chip conveyor: Tsubakimoto / Mayfran Inc. – integrated Cooling: integrated cooling system Approximate weight: 11,000 kg Application: The OKUMA MA-400H is intended for the machining of medium and high-precision components in the automotive, mold, tooling, machine-building, and metal industries. Ideally suited for versatile machining – with automatic pallet changing, it enables operator-free production. If you have any further questions, please feel free to contact us.

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Nwsdpfx Aiju R A Dls Tjn Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: used, Year of construction: 2005, 1 used, very well-maintained crankshaft milling attachment for mounting, e.g., on a lathe for milling crankshafts or other milling operations. Manufacturer: SEMA, Origin: Austria Model: SE 100 Year of Manufacture: 2005 Technical Data: Spindle mounting: ISO 50, Runout / Test mandrel L=300 mm = 0.01 mm Njdpoddziysfx Ai Tjwn Speed range, continuously variable: Currently set to 2,000 rpm Spindle is designed for: Up to 3,000 rpm Drive power: Currently 15 kW The milling spindle is designed for: Up to 25 kW Bearing diameter: 110 mm The 2 bolted adapter plates under the milling spindle are each bolted on. These plates can be used for your lathe, modified, or may need to be newly manufactured. Mounting surface of the milling spindle: L x W: 490 x 250 mm Accessories / Special Features: Milling spindle: • The milling spindle is mounted on the flat support of your lathe • Continuously variable speed adjustment, frequency inverter manufacturer LENZE, designed for up to 30 kW • Right / Left rotation • Lifetime-lubricated spindle bearings • Stable construction with hardened and ground spindle • High precision • 2-fold supported spindle with 5 spindle bearings • Workpiece clamping via a threaded spindle • Mobile carriage with control panel • Emergency stop • Lockable main switch Indexing gear for the main spindle: • A long drive rod is mounted in the spindle bore and connected to the gear • Continuously variable speed adjustment, frequency inverter manufacturer LENZE • Right / Left rotation • Jog operation, fast / slow The pictures show this unit mounted on a universal lathe SARO SPA 10 x 3000 for milling crankshafts. This lathe is not included in the scope of supply! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Type: AP 3600 x 200 Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Year of manufacture: 2005 Nwjdjzh Icyopfx Ai Ton