Used Alfa Laval M6-Mfg Plattenwärmetauscher 30107-39734 -- for sale (894)

Condition: good (used), Waste oil collection device, mobile oil collection container Nwsdpfxjb A Hdxe Agrjl -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg

Condition: used, mileage: 47,750 km, power: 62 kW (84.30 HP), first registration: 11/1955, fuel type: diesel, overall weight: 7,490 kg, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1955, Equipment: cabin, cable winch, Vehicle location: Bovenden, Kz. Haus, 1x couch, switch 4, cable winch, leaf suspension Superstructure: Tiltable body with ramps for transporting cars, THIS VEHICLE IS ONLY AVAILABLE ONCE IN THE WORLD! 6.3l diesel engine Extensively restored Nodpfx Agovhhdzerjwl Folding windshield, folding couch, right-hand drive, loading length 4m, H license plate, Alfa Romeo engine and gearbox, power steering, Trilex rims, weight reduced from 9 to 7.5t. Bought by the last German owner in Italy in the 90s. Extensively restored in the early 2000s. The restoration took more than 2 1/2 years. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Nwodpex Ndu Dsfx Agrol Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Tetra Laval spiral freezer, type: SVR 400/13.75-100-159, 380 V, 3 Ph, 50 Hz, 17 floors, s/s mesh belt, belt width: 460 mm, infeed height: 1030 mm, outfeed height: 2700 mm, total dimensions: 5850 mm x 2650 mm x 3350 mm. Including evaporator, cooling compressors and Goedhardt roof condenser, type: KOAL-76L/3-6P, number: 97-3958-010, year of construction 1997, 3 fans, dimensions: 1200 mm x 5500 mm x 1900 mm. Nwedoy Tl S Sepfx Agrol

Condition: used, Truck equipped with watering nozzles and a water gun. It was used for cleaning highway tunnels and similar areas. Njdpoy S Ac Ssfx Agrewl Original 33,140 km (it was owned by a company that closed many years ago and therefore stood still for years before our purchase.) Working, testable! We have used it ourselves for cleaning some industrial buildings.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: EVTL-06B20-2103-02, We offer this Etalon Alfa Kft Etalon Alfa Vacuum Lifter - 6000 mm model, manufactured in 2021, in very good condition and with low hours. Nsdpfxjyzipdj Agrjwl The machine is for sale due to profile change and relocation of the business. Control: AC 400V 50 Hz Power: 9.6 A Working range / load capacity: 6000 mm / 90 kg If you have any questions or require further information, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Nodpfxsy Uuw Te Agrowl Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: Nwsdpfx Agoy Uquhorjl The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe Nwjdpfxoy Uiyve Agrel The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System Nwodpfjy Ugtaox Agrjl The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy. Njdsy Uc Nkepfx Agrswl

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Nwodpfozzwg Ujx Agrjl Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170

Condition: used, Crowncapper 29mm Nwsdpfez Ad Hqox Agrsl workinf direction left right

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003496 - Manufacturer Code: 4-035-01-0823 - Condition: As new (exhibition item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service; please contact us. 1KG - 20X20X20 Nwjdpfeymd Spox Agrel

Condition: used, Year of construction: 2020, Overview    The Meheen M6 isobarometric filler from the American manufacturer Wild Goose was built in 2020. The machine was used very little.  Technical Details  Capacity: Up to 2.160 bottles per hour   Number of filling heads: 6   Last used formats: 0,33l Longneck   Possible bottle diameter: 5.3 cm - 7.6 cm  Dimensions (Floor): 1680 mm x 1070mm  Nwodpfx Ager Hx Disrol

Condition: good (used), Code: 0405 Brand: VITAP - ITALY Model: ALFA 21 Multiple boring machine for furniture, kitchens, custom furniture, bathroom furniture and various Technical data: N° 21 spindles - Centre distance mm 32 Max drilling depth mm 80 Table dimensions mm 860 x 500 Spindle rpm 2800 Motor power Hp 2,5 Njdpfx Ajyrrhiogrjwl Tilting head 0-90° Operating pressure 6-8 atm Overall dimensions mm 950 x 800 x 1140 h Weight kg 300

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 690189, overall weight: 386 kg, total width: 1,150 mm, pressure: 6 bar, operating pressure: 6 bar, number of spindles: 35, type of input current: three-phase, Condition as shown in the pictures. Nwsdpezyr Epefx Agrsl

Year of construction: 1995, condition: good (used), The unit has 6 compartments, each with a 215 mm glass shelf. Nwodpfx Agszmx H Tjrjl Model: M-6. Max. glass height: 1900 mm Width: 2450 mm Height: 2320 mm Depth: 2750 mm Condition: good, second-hand

Year of construction: 2024, condition: ready for operation (used), An almost like-new and high-precision CNC centerless grinding machine Monzesi is available. Grinding wheel outer diameter min./max.: 406mm/280mm, inner diameter: 152mm, max. width: 200mm, speed: 2100rpm, power: 11kW. Regulating wheel outer diameter min./max.: 160mm/254mm, inner diameter: 115mm, max. width: 200mm, speed: 285rpm. Workpiece diameter: 100mm, workpiece length: 200mm, regulating wheel axial adjustment: +/-10mm, taper setting: -2°/6°, tilt adjustment: +/-5°, accuracy: 0.0001mm. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/21500mm, weight: approx. 4500kg, control: CNC Fanuc 35i-B Digital, operating hours April/2026: 481h. Documentation available. An on-site inspection is possible. Expected to be available from end of July/August 2026. Nodoyyb Tlopfx Agrowl

Year of construction: 1999, condition: excellent (used), 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm Nwjdpfsh Txmtox Agrel

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Njdpfsb Tmngsx Agrewl Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: good (used), JBT M6 6 fryer. electrically heated fryer, 600 mm wide with 6 m frying length. Machine in lovely condition with auto canopy lift, top hold down belt and Teflon infeed. Rare opportunity. Njdpfx Agot Dxwtsrswl

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.3 kW at 2800 rpm at 50 Hz -Voltage: 380 volts -Receiving shaft: Ø 24 mm -Tool: Ø 118 mm Nodpeb A Rzvofx Agrjwl -Dimensions: 380/200/H240 mm -Weight: 25 kg

Condition: good (used), Thread cutter, thread cutting machine, thread drilling machine -Integrated reversing gearbox: with rapid return -Nominal input: 230 watts -Max. cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg Nwodpfx Agsb A N Ihjrsl

Condition: good (used), Thread cutter, thread cutting machine, thread drilling machine -Integrated reversing gearbox: with rapid return -Nominal input: 230 watts Nsdpsb A N Ikjfx Agrowl -Max. cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg