Used Ammann Feed Bunker / Dispenser for sale (12,367)

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C Hodpfx Aotp Df Hsaisfk • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Hfodpfx Asvnrz Dsaiok

Condition: good (used), Weinig EM 4 Hsdpfx Aezcnwueaijfk

Condition: good (used), Weinig EM 11 Hodpfozcnt Aex Aaijfk

Condition: used, Year of construction: 2016, For Sale: Hedezlt S Iopfx Aaiofk Complete TU premix bunker installation with accessories. Included: - 5 premix bunkers, micro-dosing system, dosing system 1400 liters per storage tank - 1 micro-dosing system with 5 storage tanks - dust extraction system - other components from Technology Unlimited It has been disassembled, but it is possible to view a similar, operational installation at our location. The installation can be viewed on-site.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Cold Feed Rubber Vacuum Extruder 150mm 20d manufactured by years: 2020 condition in new Equipment type E150-01-00 Screw diameter 150 mm Screw Speed 1-50 r/min Max output Around 1000kg/h Temperature control system The heating section number/power 6kw×7 Application Rubber extrusion mixing and plasticization, and extrude certain size of products in accordance with the machine head External dimensions 4200×1600×1500 (L×W×H)mm Extrusion system The feeding way Side rolls transmission power through the screw, active feeding. Feeding structure Hsdpfxjy Ez Ere Aaisfk Feed roller gear and the screw gear, and with automatic lubricating device. Screw material 38GrMoAcA Screw hardness HRC65-68 hardness of steel sleeve HRC65-70 Nitriding depth 0.4—0.7mm Screw structure With exhaust slot, with good performance of Pressure control With the pressure sensor, pressure protectionvalue 0-35MPA adjustable, also with a temperature sensor L/D 20:1 Cooling section 1 section (side rolls) Vacuum pump power 2.2 KW Temperature control Automatic control heating, cooling by electromagnetic valve Circulating pump brand Weile Cooling water pressure 0.15-2 kg/cm2 Temperature control accuracy ±1℃ Screw and the gear box Involute connection Drive of the motor and the reducer Belt drive Hardened reducer model Reducer (involute) ZLYJ420-28-I speed regulation Frequency conversion 2. Rubber sheet head(Pneumatic) 1 Equipment type E200-PDJT-03-00 2 Equipment use With the use of extruder, extrusion foaming plate for expansion Dimensions 1170×510×330 (L×W×H) mm Head Material 40Cr Heating mode By mold temperature unit, the water cycle control Heat treatment Quenching and tempering, carburizing Surface treatment electroplate runner structure Straight type

Condition: new, Feed roller for Hofmann thickness planer 210 mm wide Diameter 75 mm Internal hexagonal bore Hfjdpfjk I Si Hsx Aaiek 9 pieces available

Condition: used, Year of construction: 2000, Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Year: 2000 - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 Hodpfx Aewnhabjaiofk - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 120 - Heating boiler present: Yes - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Location: Nattheim. Hfedpfx Aezd Tg Ajaijk

Condition: used, Rotary milling cutter with 3-roller feed mechanism. Hfodozd Tgvepfx Aaijk Location: Nattheim.

Condition: used, Quantity: 3 available Used Siemens feed module for industrial drive technology. Hedpfezluatsx Aaiefk Manufacturer: Siemens Model: 6SN1145-1AA01-0AA1 Series: SIMODRIVE 611 Product type: Feed module Design: Uncontrolled Application area: CNC and servo drive systems Mounting type: Control cabinet mounting Cooling: Air-cooled System: SIMODRIVE 611 digital Condition: Used

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: Hjdjy Urtfepfx Aaiofk The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Hfedpfxjxnpx Ns Aaisk

Year of construction: 2021, condition: like new (used), Stick handling Biocone -> Stick I/O feed machine Manufacturer Biocone Year of purchase 2022 Separate conveyors for in and out (outfeed bagging features) Hfodpfx Asxmk S Ioaiek Main layout attached in operation for less than one year

Year of construction: 2006, condition: used, No. 10036 Screw conveyor with feed hopper Van Beek KS250 Used, year of construction 2006 According to our customer / the previous owner, the machine is fully functional and can be viewed on site Stationary screw conveyor with feed hopper / dosing hopper / storage hopper for the controlled discharge and onward conveying of lightweight bulk materials and piece goods Hopper volume approx. 2 m3 Conveying capacity approx. 2 m3/h Screw diameter approx. 248 mm Screw pitch approx. 250 mm Screw speed approx. 10 rpm Labyrinth seal Motor power 3 kW Protection rating IP54 Chain drive Transport dimensions approx. 2800 x 1500 x 2125 mm LWH Weight approx. 1500 kg Hodpfx Aaozltwqsijfk Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: new, Year of construction: 2026, Feed unit with a consistent feed rate and no power loss Metal gearbox with hardened gears Metal cover for the feed rollers Right-hand and left-hand operation Powerful motor Durable PU feed rollers Tripod with extended outrigger arm as standard Individually adjustable for horizontal and vertical use With counter Model VSA 48 L Article no. 5115500 Technical data Max. outreach 1050 mm Number of feed rollers 4 Roller diameter 120 mm Roller width 60 mm Hodpscnxmzjfx Aaiefk Roller travel 25 mm Speed stages 8 Speeds 2/4/5.5/6.7/11/13/16.5/33 m/min Motor power 0.75 kW Connection 400 V / 50 Hz Weight 65 kg

Year of construction: 2020, condition: new, Feeding for granulate and powder Hsdpfx Aajfmn Ufjiofk

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Strip inlet width max. 203 mm Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Hfjdpfjzlqkbsx Aaiek Please contact us for more information!

Condition: used, Second-hand machine Features and technical specifications: - with 3 rollers - Roller diameter 120 mm - Roller width: 60 mm Hfedpszlbudofx Aaijk - Roller travel: 20 mm - Speeds (left and right rotation): 4–8–11–22 m/min - Voltage: 400 V - Motor: 0.8 kW - Weight approx. 70 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), functionality: fully functional, Year of construction: 1979, DEMAG fine travel drive, consisting of: DEMAG motor KBA 140 B 4, 8.8 kW, 1,440 rpm; DEMAG motor KBA 80 B 4, 1.4 kW, 1,340 rpm; DEMAG gearbox EGO 8 B 3 I = 9.9 Hsdpfew Ulirjx Aaisfk

Year of construction: 2001, condition: used, Fully automatic infeed system for dovetail cutter Table width max. 620 mm Spindle feeder Automatic length sorting, 3 lengths Package forming, 3 x Buffer Hjdpoh Icimefx Aaiofk Package turner Package destacking Manual infeed Buffer before the zinc coating system with 6 compartments Specification: Wood input length: min. 150 mm max. 600 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Performance: 6 milling tables/min Working height: 960 mm Table width: 620 mm System width: System length: See pictures System is immediately available, already dismantled.

Condition: good (used), Pre-stroke: ALBA Type Mvhy 50 Hedpfx Aajlz I Hbsisfk sheet metal straightening: Georg SKB With complete documentation!

Condition: good (used), Feed: Manufacturer: ALBA Tip: AVS 400 Belt straightening: Manufacturer. George Type: SBK 2 Hfsdpfelz I R Rsx Aaiek Double straightening and feed line!!! With complete documentation!!

Condition: ready for operation (used), The robot is used for dispensing pastes or liquids in a targeted or arbitrary manner. Hfsdpfx Ashx Nh Reaiok

Condition: like new (used), Year of construction: 2026, Band width: max. 76 mm Feed length: max. 76 mm Band thickness: 0.076 - 1.91 mm Speed: max. 195 strokes/min at full feed length Feed force: 205 N Hedpfoxaqvox Aaiefk with mechanical control valve or optionally, as shown in the picture, with solenoid valve (24V or 230V) also available in: - band widths from 38...400 mm - feed lengths up to max. 300 mm - band thicknesses 0.05...3.18 mm