Used Amtec Banding Machine for sale (65,734)

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges Ncsdpfxjzc Agko Acwew - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater Nedsc Tmygjpfx Acwocw CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm Ncsdpfxshy Tlrj Acwjw weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine Ncodpfx Acoc S Di Rswjw SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Ncsdpfx Acjlc Ewijwjw Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit Ncodpfjfbr S Rox Acwsw radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), SCM contura in excellent condition Ncedpet E T I Nefx Acwsw

Condition: new, Year of construction: 2026, Machine includes: Pre-milling, pre-heating, pre-melting, pressing, fine trimming, end cutting, corner rounding, cutter scraping, flat scraping, buffing Heavy duty machine body and most mechanical machine parts are proceeded by advanced CNC machines for higher stability and longer service life without deforming; Merges numerous functions in one machine, including pre-milling, pre-heating, pre-melt gluing Njdpfexd Ubbjx Acwocw system, snipping, end trimming, fine trimming with servo, corner trimming, scraping with servo, surface scraping and buffing, sprayers, edge banding work can be done in one process. Intelligent PC control, infeed fence, tape pressing rollers, fine trimming and scraping are servo adjust. Corner rounding pneumatic adjust. Machine Speed 16/20/24m/min; Nesting kit design, pre-drilled nesting hole friendly Fine trimming and Corner rounding by HSK25

Condition: new, Year of construction: 2026, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw Ncodpfoi D D A Ssx Acwjw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), functionality: fully functional, Cutting speed, continuously variable: 20-70 m/min Saw blade: 3660 x 27 x 0.9 mm Feed length: 400 mm Cutting range – round / square: 250 / 250 mm Nodpfxozgdbie Acwscw Cutting range – rectangular: 300 x 260 mm

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 with heated infeed rail Gluing station with electronic temperature control and forward/reverse function - Cutting unit - Milling unit - Profiling blade - Cleaning station - Edge thickness 0.4 - 5 mm - Board thickness up to 50 mm - Part length min. 150 mm Njdpfxekwg Tbj Acwocw - Part width min. 60 mm - Workpiece thickness 8 - 50 mm - Feed rate 12 m/min L x W x H approx. 4000 x 1260 x 1600 mm (Width can be reduced to 800 mm for shipping by removing the extendable support) Availability: by arrangement Location: Hochheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Nodpfx Ajv Sv Enecwscw Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Njdpfx Aswpm Igocwjcw Radius milling unit Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Shipping dimensions: 370x100x125 cm Weight: 1330 kg Location: Röllbach Availability: short term

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. Ncodpfxey Rlbno Acwow 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance.

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Ncedpfx Acey Sk T Eewew Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. /// Machine Construction The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) Ncedpfxszcpixs Acwsw - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT Optimat KDF 550 C, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20+ Working thickness adjustment servomotorical Material height 8 - 50mm Ncodpfxjq A N Nuj Acwew Edge thickness 0,4 - 8,0 mm Feeding speed 11 m/min. Total length including feeding plate 5860mm Total weight 2660 kg Very good condition, fully working!

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit Ncedpfxsy Id Nlj Acwew - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: like new (used), Year of construction: 2013, IMA COMBIMA 2013 - 2x loading / unloading station - for PVC, ABS & solid wood edges - U-form layout - with KFA 20 aggregate - immediately available Nodpfjtxtkxox Acwocw For more Info, Video and technical specs, please contact us.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control Nsdpfx Ajzc E A Iecwecw • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Ncodjy Exwfopfx Acwjw Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Stefani Ibimatic Double Edge Bander Year 1998 S/N NH 002993 Manufacture StefaniS.p.A. Italy Edge banding min / max 14-65mm Thickness min 0,3mm Max size of ABS 3 x 35mm Panel thickness min/ max 60mm Panel size 220- 3200mm Working edge 30-75mm Distance between the edges 400mm Adjustable feed speed from 6 to 36 m/min Units: 1+1 front milling units, 4 kW, pneumatic 1+1 air blast for cleaning the workpieces 1+1 gluing station / hot melt adhesive unit GR_HMP-P HM-P GLUING UNIT FOR STRAIGHT EDGES The device is designed for gluing straight edges using a thermo-meltable adhesive with a removable container container and a premelter for quick melting The unit includes Nsdjtrgy Nopfx Acwscw A Glue container B Strip storage table C Pneumatic device box D Support base for strip storage E Guillotine shears F Side pusher G Inclination of the glue unit H Mobile table top 1+1 feeding device for edge trims, 5 stations 1+1 head cutting unit, 0.35 kW, 12,000 rpm 1+1 equalizing unit, 1 kW, 12,000 rpm 1+1 chamfer trimming unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm 1+1 head rounding unit with two 0.35 kW motors 1+1 milling unit, 4 kW, right side, left side empty space ( U28+U55), diameter 125mm- RPM 12,000 1+1 Self-adjusting scraper RCA 95 1+1 Brush / buffing unit 0,29 kW, 1500 rpm SPO ( 150/50x 50mm ) 1+1 ABS strip color brightener, 1600 W

Condition: good (used), Year of construction: 2018, machine/vehicle number: 431-92, Offer 26142 Technical data: - Cutting range at 90°: round 350 mm - Cutting range at 90°: flat 320 x 460 mm Nsdpfx Ajzc Izascwscw - Miter angle adjustable from 90° to 30° - Cutting range at 45°: round 280 mm - Cutting range at 45°: flat 350 x 280 mm - Cutting range at 45°: round 180 mm - Material feed system - Material support height approx. 740 mm - Saw band dimensions 4350 x 34 x 1.1 mm - Cutting speed adjustable from 25 to 90 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure continuously adjustable - Material clamping device - 3 roller conveyors, total length 1400 mm - 1 roller stand - Total motor power 400 V / 4.8 kW - Space requirement approx. W 1400 x H 1400 x D 2200 mm - Weight approx. 1900 kg

Condition: repair required (used), functionality: unexamined, conveyor belt thickness: 8 mm, number of straightening rollers: 9, conveyor belt width: 2,200 mm, roller diameter: 95 mm, The leveler has been disassembled! Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Maximum sheet thickness to be leveled: 8 mm ENGLISH: Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Ncsdpfezcm Dgex Acwsw Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Maximum sheet thickness to be leveled: 8 mm

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers Nedjzccuuepfx Acwscw TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)