Used Balconi Dmp 70T for sale (153)

Condition: new, machine/vehicle number: 2428b2018baf171e60fef6740, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions, 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Rear spray flaps across the entire width Mudguards in front of 1st axle and rear of each axle with anti-spray, according to EC Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 2 pairs of ring lashing eyes, 5 tons each at the front on gooseneck 11 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 2 x on gooseneck 9 x distributed in the low loading area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17.5 brand of the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Colored line routing for easy servicing. Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Gusdpfxei Ri E Rs Alxob Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle - driving stability system Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 LED rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with sheet steel covering Storage box recessed in drive-over slope to gooseneck Then with 70 mm softwood floor, steel/ checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 9 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK socket NW 10/3, without connecting hoses Operating instructions With 10,000 kg axle load, a special permit is required, only indivisible load possible!!! Special permit required if total train weight exceeds 40 tons! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) When applying for a special pe

Condition: new, machine/vehicle number: 364a8214fd0c4afa2b936c7db, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions (not in conjunction with forced steering) 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation Folding rear support Wheel chocks with holder Aluminum side collision protection Spray flaps in front of 1st axle and rear of each axle with anti-spray, according to EC Stainless steel storage box, w=600/h=400/t=500 mm, with polished door, lockable Lifting table to gooseneck, approx. 3000 mm long, can be raised hydraulically to pass over the gooseneck, with mechanical lock when raised. Operation with radio remote control Electric cable winch, 24 volt, tractive force 8165 kg, mounted in the middle at the very front of the loading area, standing on the gooseneck, in stainless steel box with door (if technically possible, exact testing still required), operation with radio remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers on gooseneck and rear inclination. Low loader lashing eyes Gooseneck:5 pairs of lashing eyes recessed in the outer frame, each with 5 to.2 pairs of lashing eyes in the middle, each with 5 to.1 pair of lashing mushrooms on the top and outside of the outer frame recessed in the neck slope, each with 10 tisch:4 pairs of lashing eyes recessed in the outer frame, each with 5 to.4 pairs of lashing eyes in the middle, each with 5 to. Pair of lashing eyes in the middle, each 5 to.1 pair of lashing mushrooms at the top and outside of the outer frame, each 10 fbett:4 pairs of lashing eyes in the outer frame, each 5 to.5 pairs of lashing eyes in the middle, each 5 to.4 pairs of lashing mushrooms at the top and outside of the outer frame, each 10 to. Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve, with hold function for lowering + auto-reset function Wheels and tires 235 / 75 R 17,5 according to manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Gsdpei Ri E Ujfx Alxsub Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear Lights completely in LED design (note! with certain towing vehicles, misdiagnosis may occur, although the function is given) 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Additional LED work light(s) at the rear, switched via reversing light LED rotating beacon with holder, switched via parking light (light can be removed) Pair of warning signs, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck covered with Mega Gri

Condition: new, machine/vehicle number: df15479123e15bcf265d560e1, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3000 mm Telescoping Central tubular frame in neatly welded telescopic frame sections that run into each other. Extendable by max. 6,000 mm and can be arranged approx. every 1,000 mmPayload/point load is reduced when extended! Locking mechanism with mechanical bolt lock With sliding table Low loader lashing eyes 2 pairs of ring lashing eyes each 5to at the front on gooseneck 11 pairs of lashing mushrooms at the top and at the side embedded in the outer frame each 10to 2 x on gooseneck 9 x in low-loader bed distributed first lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between the lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 3 pairs of additional hinged lashing eyes embedded in the low bed, 10 to each1x at the start of the low bed, 1x in front of the 1st axle and 1x behind the 3rd axle Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Last 2 axles self-steering, with automatic reversing lock via reversing light and manual locking function via hand button on the vehicle. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5 Fulda tires Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / checker plate covering Storage box recessed in drive-over slope to gooseneck Then with 70 mm softwood floor, steel / checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Gsdoi Ri Hnepfx Alxoub Drop sides 25 mm hollow aluminum profile, 400 mm high, front and side on gooseneck, pluggable Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle Hydraulic connection w

Condition: new, Year of construction: 2025, Overband Magnetic Separator – Type DMPM 2000 | Industrial Version Manufacturer: die magnetprofis GmbH & Co. KG Model: DMPM 2000 Condition: New / unused Availability: Immediately ex stock ⸻ Technical Description: The DMPM 2000 overband magnetic separator is engineered for the reliable and continuous removal of ferromagnetic contaminants from product streams. It is ideally suited for use in recycling plants, bulk material processing, crushing plants, conveyor lines, and material processing facilities. ✅ Key Features: • Design: Cross-belt discharge with motor & discharge belt • Magnet type: Permanent magnet (maintenance-free) • Belt width: 650 mm • Magnet length: approx. 2000 mm • Support structure: Robust welded steel construction • Drive: Electric motor with low-maintenance gearbox • Ready to operate: Pre-assembled, ready for operation, incl. lifting lugs • Options: Control unit in the form of a frequency converter, gallows for suspension ⸻ Fields of Application: • Recycling industry (metal, wood, construction debris, etc.) • Conveyor systems in the cement, energy, or waste sectors • Protection of downstream machinery (e.g., shredders, crushers, mills) • Food industry (optionally available in stainless steel version) ⸻ Scope of Delivery: • Overband magnetic separator DMPM 2000 (new unit) • Conveyor belt with drive unit • Suspension system (chains as required) • Documentation (operating manual, CE conformity) • Optional: Control – frequency converter Our core competence is delivering exactly what our customers truly need. Together with our customers, we develop tailored, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Guodpfx Aewx H E Djlxsb Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnets, metal separator, block magnet, filtration systems

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Magnetic grid 200x200mm High-quality cabinet construction completely closed Gjdpodtdwaefx Alxsub Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below

Condition: new, Year of construction: 2025, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Gsdpfx Alshupkmoxeub Permanent overbelt magnetic separator TYPE PEM1200 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM800 Gusdpfx Alshun Uisxjb 1,400 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 7 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: new, Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1000 1.600 x 900 x 220mm ===== Gsdotxn Ewjpfx Alxsub Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 8 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by telephone to find a suitable solution for your application.

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1200 1.800 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Gjdjtxn Irjpfx Alxsub Magnetabmessungen: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed.

Condition: ready for operation (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM1400 Gsdpohun U Uefx Alxsub 2.000 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 1.400x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 10 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Year of construction: 2020, condition: like new (used), Magnetic tape, overbelt magnetic separator, magnetic filter, lifting magnet, overbelt magnet Permanent overbelt magnetic separator Gedpehun Uusfx Alxoub TYPE PEM1800 1800x1000x400mm ===== 4x ring screw for suspension Magnet dimensions: 800x500x180mm PU conveyor belt with hard cover, matt black Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-65 Three-phase gear motor GEMOTEG 1.1KW Cladding: RAL 5015 Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: excellent (used), Storti GSI 170 TA 9 pallet production line Gjdpfx Aleu N Svzjxsub The GSI 170 TA 9 machine is a hydraulic nailing line designed for pallet production. It has a drive system with an alternating nailing carriage, and a marking burner to efficiently meet the needs in pallet manufacturing companies.

Year of construction: 2016, condition: new, machine/vehicle number: DMPMP260x104x41,5, Plate magnet in NdFeB Neodymium version 260 x 104 x 41.5mm Completely welded housing 4 tapped holes M8x20mm Edge distance: 40mm -BHmax: 263-279 kJ / m³ Br: 1170-1210, JHc:> 955KA / m Maximum operating temperature: 80 ° C Gujdpfx Aoc Tctkelxjb This is an overproduction which has not been accepted by the customer. More than 10 pcs.

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Additional key for office programming software Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 90 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 11 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher carriage with 9 clamps Blade carriage speed 120 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Guedovtbzkjpfx Alxjb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, clamping force: 70 kN, screw diameter: 32 mm, injection weight: 109 g, type of input current: AC, The Negri Bossi 70T in very good condition comes with hopper loader distance between tie bars 360x315 Gujdpfx Aljy Rvfkjxjb

Condition: excellent (used), operating hours: 4,589 h, functionality: fully functional, center height in crank: 100 mm, center height: 100 mm, grinding length: 400 mm, Studer S20-2 Operating hours: 4589 Centre height: 100 mm Max. grinding length: 400 mm Internal and external grinding Extra spindle Coolant filtration system Guedpfx Aey R D Rnolxob Large number of accessories Cabinet Documentation Machine is powered for inspection

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate Gedpoy R A Apsfx Alxoub calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: new, Nikon V-20 B profile projector NEW, never used (new price 52,400 euros) x,y 250 x 150 mm screen around 500 mm 10 x and 20 x magnification light through and light on the product Gujdpevlph Asfx Alxjb heidenhain quadra chek digital readout with various measuring/ and calculation functions turntable to align the product documentation

Condition: new, Deltronic DH 216 profile projector, NEW never used x,y 90 x 40 mm screen round 400 mm 10x magnification deltronic mpc 5 digital readout with various measuring/ and calculation functions documentation Gsdpovlphpsfx Alxeub

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, machine/vehicle number: 935452, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 4,450 kg, Equipment: documentation/manual, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software Gusdpfx Aleywcivoxjb machine powered up for inspection

Condition: used, doboy BD-V continuous sealer machine Gusdpfxsw Hy N Ee Alxjb

Condition: excellent (used), Year of construction: 2015, Gyson Orbit 600, electrically heated and rotary washing machine, in very good condition new price 73,500 pounds / 88,200 euros Godpfx Aljvlplhoxsub year of manufacture 2015

Condition: excellent (used), Year of construction: 2011, OPS Ingersoll Gantry Eagle 800 Year of manufacture: 2011 Operating hours: 1703 Eagle Powertec control X, Y, Z travel: 550 x 850 x 450 mm Clamping plate: 760 x 1000 mm Max. workpiece weight: 2000 kg EROWA interface Gujdpfx Aoxiwz Uelxjb Submersible working tank C-axis Chiller Fire extinguishing system Remote control 20-station electrode changer 60 amp generator Incl. dielectric fluid (+/- 700 liters) Incl. probe Incl. probe on machine bed Incl. magnet 400 x 200 mm Incl. cabinet with accessories Incl. documentation Machine is powered up for inspection

Condition: good (used), Year of construction: 2012, Kent KGS 250 WM1 surface grinding machine year of manufacture: 2012 max. grinding range: 460 x 200 mm max. height: 300 mm top dresser electronic handwheel variable magnetic force central lubrication touchscreen with settings for rough and finish grinding, etc. cooling water/filter tray documentation Gusdpfx Alex A D H Rjxob machine is powered on for inspection

Condition: new, Gyson Orbit 600 , electrically heated and rotary washing machine , NEW, never used new price 73,500 pounds / 88,200 euros Guedpfovlpiyjx Alxeb incl. certificates full documentation