Used Bear 7309523 for sale (3,011)

Condition: used, RA1188 Schulz roller curve 90° roller curve conveyor 450-390 IR1220 Manufacturer: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 1220 mm Conveying speed: v = 0.35 m/s Blsdpsu Rv U Rjfx Aqwsl incl. lateral guides on both sides Roll: Type: G6/50 plain bearing with conical plastic moulding Transport mask: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports 70,00€ per piece Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Year of construction: 2002, Control: Siemens Sinumerik 840D Center distance max.: 5000 mm Swing diameter over bed max.: 890 mm Turning diameter max.: 820 mm Spindle bore: 122 mm Spindle diameter in front bearing: 240 mm Spindle nose: A15 / DIN 55026 Main drive power: 80 kW (100% ED) / 105 kW (40% ED) Number of axes: 4 (X, Y, Z, C)C-axis: yes, max. torque 5000 Nm Tool system: Vert./Hor. head, Capto C8 (Sandvik) Blodpfxozv Hw Se Aqwol Milling spindle: 28 kW / 267 Nm (100% ED) Tool magazine: 100 positions, max. tool length 650 mm Travel X: -10 / +490 mm Travel Y: -130 / +300 mm Travel Z: +180 / +5038 mm Rapid traverse X / Z: 15 m/min, Y: 10 m/min Tailstock: yes, quill diameter 160 mm, taper MK 6 2 steady rests (one of them programmable) Chip conveyor and paper belt filter system Dimensions approx. (L x W x H): 16000 x 4900 x 3300 mm Weight approx.: 35.000 kg

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bodpfevvkipjx Aqwjll

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Bljdpfsw Hwp Njx Aqwjl

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Blsdpfxjhkz E Tj Aqwjl Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Bodpshp Rdlefx Aqwell Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-roll mechanical calender. Available for immediate delivery, subject to prior sale. Model: FX4.90.1330. Double-nip configuration. Working width: 1330 mm. Diameter of upper and lower rolls: 90 mm. Diameter of side rolls: 95 mm. Thickness range: 2 – 2.5 – 3 mm. (1.5 x D, 3 x D, 5 x D) Motorized upper and lower rolls with equal power. Motorized side rolls for up/down movement. Front opening of the upper roll. Roll hardness: HRC 55/60, depth 2 mm. Special bearings for side rolls. External lever for adjusting roll inclination. Sheet clamping with bearing-supported device. 2-pedal foot control. Electrical panel compliant with “CE” standards. Indicator in mm for reading sheet clamping. 4-ROLL MECHANICAL CALENDER with double-nip configuration and front release. The upper roll is fixed, while the up and down movement is applied to the side rolls and the lower roll. Sheet clamping is very easy, as once the sheet is inserted between the upper and lower rolls, the latter rises and locks the sheet in place. Power: 1.8 kW Dimensions: 800 x 2100 x H 1300 mm Weight: 625 kg Included with the machine: Bsdjfh Skpspfx Aqwoll Conical device on the front of the upper roll. No. 02 digital displays for the position of the side rolls. Grinding/Turning of the rolls after heat treatment. Roll hardening.

Condition: new, roll diameter: 100 mm, roll width: 35 mm, The scope of delivery includes: 01x double-stop brake roller, new Roller material: Polyamide wheel Plain bearing with bearing marks Roller material color: cream white Material color frame: galvanized Total height: 135 mm Castor Ø: 100 mm Castor width 35 mm Rotation radius: 360° Panel dimensions: 105 x 80 mm (WxD) Screw grid: 80 x 60 mm (WxD) Drill hole Ø: approx. 11 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 0.908 kg Advantages compared to PA wheels: - The PA wheels are very low-wear. - They leave no marks on the floor. Bljdpfjrtplnjx Aqwol - PA wheels have a very low rolling resistance. General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. Blsdpfx Asqlck Njqwjl reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2008, x-travel 1500 mm y-travel 800 mm z-travel 700 mm table surface area 1760 x 700 mm spindle taper SK 40 spindle turning speed - stepless 8000 U/min spindle drive 15 kW feeds 1 - 8000 mm/min rapid traverse X/Y/Z axis 15 / 15 / 12 m/min table load max. 2500 kg spindle throat 760 mm ATC 40 Pos control HEIDENHAIN, TNC 530 weight of the machine ca. 12,5 t dimensions of machine L x W x H 4,23 x 2,98 x 2,74 m - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm; 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant Bledpfxjux Agvo Aqwsl - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included -

Condition: new, Year of construction: 2026, Holzkraft panel saw with scoring saw Compact panel saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence The cutting plane of the compact panel saw is directly on the sliding table Precision-guided aluminum crosscut fence, anodized as standard Large table extension guided on a telescoping arm and adjustable in length The standard table widening and extension allow for easy work with larger workpieces The large-sized saw unit made of gray cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running, and a long service life Large work table made of ground gray cast iron, making it extremely robust and durable Smooth operation and precise cuts Aluminum crosscut fence Equipped with a tried and tested ball bearing system Dust and dirt resistant due to minimal contact point between the ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guide rails Telescoping fence Extendable aluminum telescoping fence Angle adjustable With two professional folding fences Ek2a0i2ik Parallel fence Bledpfx Asih Dwvoqwel Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model SC 2 classic Item No. 5504215 Technical data Table dimensions 1020 x 325 mm Table height 900 mm Fence length 1660 mm Cutting height max. 90° with scoring saw 100 mm Cutting height max. 45° with scoring saw 79 mm Rip width max. to the left of the saw blade 1270 mm Cutting width with parallel fence 900 mm Saw blade tilt 90° - 45° Saw blade diameter max. with scoring saw 315 mm Saw blade diameter max. without scoring saw 315 mm Scoring saw blade diameter (optional) 80 mm Main saw blade speed 4000 min-1 Scoring saw blade speed 7600 min-1 Electrical connection 400 V / 50 Hz Motor power 4.0 kW Dust extraction nozzle diameter 120 mm Dust extraction nozzle diameter saw blade guard 60 mm Weight 295 kg Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Bedji Anadjpfx Aqwsll Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, tire size: 13, wheelbase: 155 mm, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004188 The UNITRAILER Garden Trailer 230 TIPPING transport trailer is the latest product from UNITRAILER. It is currently our largest car trailer with a GVWR of up to 750 kg. The trailer has a folding tailgate, which allows for loading and unloading in just a few minutes. By using a tilting drawbar, it can be placed vertically against the rear wall. We will take care of all formalities associated with the purchase for you. When ordering a car trailer, please specify the GVWR of the vehicle that will be towing the trailer. You can find information on the permissible total weight on the last page, under the information in the vehicle registration document. Technical data of the Garden Trailer 230 TIPPING car trailer CHASSIS - Steered axle from Knott or AL-KO – special orders available on request from Unitrailer. Wheel size: 155/70 R13. Tilting V-drawbar that can be folded under the trailer floor at any time. BODY - Load-bearing frame made of hot-dip galvanized sheet steel. Curved profiles were used with screws. Loading area: non-slip, water-resistant screen-printed plywood, 9 mm thick. SIDE WALLS - all side walls are made of galvanized steel. Rear side wall folds down. Bledpfx Ajir H R Neqwjl Delivery costs will be charged separately.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 3.6 m³, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004191 The Garden Trailer 230 TILT car trailer from UNITRAILER, with a maximum permissible weight of up to 750 kg, features a folding rear gate, allowing for loading and unloading in just a few minutes! The tilting drawbar allows it to be positioned vertically on the rear gate at any point. All formalities related to the purchase will be handled for you. When ordering a car trailer, please specify the maximum permissible weight of the vehicle that will be used to tow the trailer. Technical data of the Garden Trailer 230 TILT car trailer: CHASSIS - Steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-shaped drawbar, which can be folded under the trailer floor at any time Bljdpfeir H R Tjx Aqwol BODY - Load-bearing frame made of hot-dip galvanized sheet steel Curved profiles were used with screws Loading area: non-slip and water-resistant screen-printed plywood floor, 9 mm thick SIDE PANELS - All side panels are made of galvanized steel. Total height of the side panels: 70 cm Shipping costs will be charged separately.

Condition: good (used), Technical data for the pallet racking beam: Racking system: Dexion Type: Speedlock P90 (Silverline) Included in the scope of supply: 01x Pallet racking beam, used Material color: sendzimir galvanized Beam type: 125|14 I-profile: 125 x 50 mm Agraffe: 5 hooks Clear span: 3,000 mm Max. load per beam pair: 2,100 kg, with evenly distributed load Bsdpfx Aqoi E Tbvowjll The shelf load capacities are only valid in conjunction with the P90/20 support. In addition, depending on the bay load and the hanging height, the load-bearing capacity of the hook plate must be checked. 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out.

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) Bedpecnxa Ssfx Aqwoll 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edgebanding machine F5 Next With PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation including glue dispensing device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (including pneumatic feed), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Chassis F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent Bodelht Hwopfx Aqwoll F5/25 Spray device for edge F5/27 Nesting for cutter and radius pull blade F6/28 Spray texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Bedpfxsd Hx Hmj Aqwoll Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Blsdpfxjw U Ry No Aqwjl Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: new, bore capacity in steel (diameter) 32.0 mm threading max. M 24 throat 265 mm bore stroke 150 mm morse taper 3 MK turning speeds 320 - 1820 U/min Bsdpfx Aqexabxrswsll table-size 332 x 332 mm T-slots 14.0 mm column diameter 100 mm 400 x 380 mm distance spindle/base plate max. 735 mm voltage 400 V total power requirement 2.2 kW weight 246 kg range L-W-H 520 x 920 x 1380 mm Description: - robust table drilling machine with thread cutting device - very smooth running thanks to pulleys made of gray cast iron - drive: V-BELT - quality ball bearings ensure a high concentricity of the spindle - large drilling table with diagonally running T-slots - drilling table height adjustment via rack - thread cutting device - powerful and high-torque aluminum motor in accordance with IP 54 - standard with T-slots in the ground base plate - ergonomic handles for comfortable working - foldable drilling spindle guard - emergency stop button at the front - manual drilling depth adjustment - control cabinet - left with main switch

Condition: new, Year of construction: 2026, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Bledpfx Asv Sg T Noqwsl Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Holp MultiGrip Bucket / MG.095.080 / MS08 / 800 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €5,895.00 net / €7,015.05 gross - For excavators up to: 9.5 t - Own weight approx.: 345 kg - SAE capacity: 252 liters - Cutting width: 800 mm - Maximum opening: 1,200 mm - The bucket is made entirely from HARDOX steel. - The MultiGrip combines the functions of both a digging bucket and a grab in a single attachment. Advantages of the Holp MultiGrip Bucket: - Cylinder with hardened piston rod - Only grab rotation lines required for operation - Robust side wall-mounted bearings - Secure gripping and transporting - Strong shafts connect the two fingers (forming a 3-point grip for small objects) - Significantly lighter than a grab - Up to 30% more soil can be loaded into the bucket during digging operations - Minimizes damage caused by falling material The MultiGrip is suitable for all digging and gripping applications, making it ideal for placing stones, backfilling soil, or handling wood and brushwood, and is significantly faster than a conventional grab. It can grip and sort all types of materials, including earth or grass. Thanks to its unique shape, the MultiGrip bucket offers optimal penetration and handles bulky materials with ease. We have many other Holp products available for immediate delivery from our warehouse! Simply contact us at ... for further information. Blsdpfx Aeynflajqwel On request, we are happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range! Errors and prior sale excepted. = Further information = New: Yes Intended use: Construction Please contact Marius Herden for more information.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,000 kg, rotor diameter: 400 mm, number of blades: 10, total length: 1,120 mm, total height: 1,950 mm, control cabinet length: 500 mm, control cabinet width: 300 mm, control cabinet height: 1,500 mm, total width: 1,210 mm, rotor width: 600 mm, power: 22 kW (29.91 HP), type of input current: three-phase, sieve perforation: 6 mm, warranty duration: 12 months, input voltage: 400 V, inner dimension width: 590 mm, opening width: 400 mm, Equipment: CE marking, ZERMA GS 400/600 – High-Performance Granulator | Precision. Performance. Reliability. Experience the new ZERMA GS 400/600 high-performance granulator in action. The GS series was developed for the highest demands in plastic recycling and combines maximum performance with exceptional reliability and easy maintenance. Highlights ✔️ Rotor diameter: 400 mm ✔️ Rotor width: 600 mm ✔️ Proven ZERMA V-Cut technology ✔️ 5-knife rotor ✔️ 3 stator knives ✔️ Robust steel construction ✔️ Intelligent drop-down cutting system ✔️ External knife adjustment ✔️ Robust bearing outside the cutting chamber ✔️ Optional bypass hopper for long profiles and pipes ✔️ Designed for continuous industrial operation Typical applications * Packaging tapes (at 8 mm, 600 kg/h) * Runners and injection molded parts + start-up lumps up to 1 kg Bjdpfjzmhgijx Aqwsll * Plastic profiles * Pipes * Sheets * Films * Blow molded parts * Engineering plastics * Production waste * Post-industrial recycling The GS 400/600 stands for precise shredding, high throughput, and long service life – the ideal solution for modern plastic processors and recycling companies.

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Bledpfszpbazjx Aqwol Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: used, Manufacturer : Clextral Model : Evolum 32 Type: Twin-screw extruder Blsdsy Abclspfx Aqwjl Previous application: Food processing – Cooking and extrusion Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled DC motor: 23.78 kW Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)