Used Bearing Disc for sale (9,573)

Condition: used, Year of construction: 2025, Screening drums with star discs, separation distance 15 mm Medium screening – grain size 0-20/25 mm Star discs in wear zones with hardfacing using armored wire Adapter OQ70/55 – not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 drums Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min Laodpfx Aszv Rfajmveg - Separating stones, branches, roots, turf, debris, etc. from still usable waste soil, for example, for topsoil in landscaping. - The mixing of compost, sand, substrate, etc. with the soil during the screening process is easily possible. - Screening out coarse stones from excavated soil - Screening out stones from mixed soil after demolition. - Feeding clumpy soil onto a screening system reduces waste and increases throughput. The TSP.154 – the bearings are maintenance-free, and the chain housings contain grease that ensures lubrication at every point through the movement of the screen and the rotation of the chain. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, mileage: 721,000 km, power: 353 kW (479.95 HP), first registration: 11/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Tel.: call (Contact · Telephone · Mobile · WhatsApp) Special Equipment: Aero kit, 225 Ah battery, mechanical battery isolator switch, ETA circuit breaker, comfort driver’s seat - air-suspended and heated, with lumbar support and adjustable shoulder area, flame starting system, 12-speed gearbox - type: ZF 12 AS, Tipmatic, single-cylinder air compressor 360 cc with Air Pressure Management (APM), heated air dryer, Eberspächer D4S additional air heater, retarder, 12V and 24V cab socket, fleet management system control module, cab door extension, additional high beam/fog lamps with cornering function, heated fuel pre-filter with water separator Additional Features: Axle configuration: 4x2, ambient lighting, curb/front mirror, 24V / 7-pin trailer socket, ABS trailer socket, anti-slip regulation (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system pre-installation, electrically adjustable and heated exterior mirrors, heated wide-angle mirror, MAN-Tronic on-board computer, right kerb mirror, rear axle differential lock, MAN-Brakematic electronic braking system, EURO 6 engine, cab with Nordic insulation, cab: XLX, suspension: leaf / air, electric windows, remote central locking, tinted windshield, 28 V 80 A alternator, manual sunroof, superstructure: tractor unit, EVB brake rocker, automatic climate control, heated fuel filter, fuel tank: combination tank - 400 L diesel + 60 L AdBlue, multi-function steering wheel, raised air intake, engine 12.4 L - 353 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, side-mounted spare wheel carrier, fifth wheel: Jost JSK 37 C, rear axle disc brakes, front axle disc brakes, tinted rear side windows, comfort quality seat upholstery, sunblind for front windshield, sunblind for side window, driver’s door, spray reduction, stabilizer on one rear axle, front axle stabilizer, external access storage box, TGX, tinted door windows, viscous fan, central locking, permissible gross weight 18,000 kg * MAN TGX 18.480 4x2 BL * 2x bed Laedpfx Aoxtd Ezsmveg * Sleeper cab * Refrigerator * Automatic transmission * Retarder * Corrosion protection * Distance sensor * Cruise control * Lane assist * Tipping hydraulics * Displacement: 12,419 cm³ * Power: 353 kW * Euro 6 * FIN WMA06XZZ3HM729951 * Engine damage * Lower bearing seized * 721,581 km * Year of manufacture: 15.11.2016 * Net price * All information without guarantee

Condition: used, mileage: 721,000 km, power: 353 kW (479.95 HP), first registration: 11/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, Tel.: Call (Contact · Telephone · Mobile · WhatsApp) Special equipment: Aero kit, 225 Ah battery, mechanical battery master switch, ETA circuit breaker, comfort driver's seat – air-suspended and heated, with lumbar support and shoulder adjustment, flame-start system, 12-speed transmission – type: ZF 12 AS, Tipmatic, 1-cylinder air compressor 360 cc with Air Pressure Management (APM), heated air dryer, Eberspächer D4S auxiliary air heater, retarder, cab power sockets 12V and 24V, fleet management system control module, cab door extension, additional main beam/fog lights with cornering function, heated additional fuel filter with water separator Additional features: Axle configuration: 4x2, ambient lighting, entry/front mirror, 24V/7-pin trailer socket, ABS trailer socket, traction control (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system pre-installation, electrically adjustable and heated exterior mirrors, heated wide-angle mirror, MAN-Tronic on-board computer, right-side curb mirror, rear axle differential lock, electronic brake system MAN-Brakematic, EURO 6 engine, cab: Nordic insulation, cab: XLX, suspension: leaf/air, electric windows, remote central locking, tinted windscreen, 28 V 80 A alternator, mechanical sunroof, Body/build: tractor unit, brake rocker lever EVB, automatic climate control, heated fuel filter, fuel tank: combination tank – 400 l diesel + 60 l AdBlue, multifunction steering wheel, raised air intake, engine 12.4 l – 353 kW diesel, engine compartment encapsulation, wheelbase 3,600 mm, lateral spare wheel lift, fifth wheel coupling: Jost JSK 37 C, disc brakes rear axle, disc brakes front axle, rear side windows tinted, seat cover/upholstery: comfort quality, sunblind for windscreen, sunblind side window driver’s door, spray suppression, rear axle stabilizer, front axle stabilizer, external storage box, TGX, tinted door windows, viscous fan, central locking, permissible total weight 18.00 t * MAN TGX 18.480 4x2 BL * 2x beds * Sleeper cab * Refrigerator * Automatic transmission * Retarder * Corrosion protection * Distance sensor * Cruise control * Lane assist * Tipping hydraulics * Displacement 12,419 cc * Power 353 kW * Euro 6 * FIN WMA06XZZ3HM729951 * Engine damage * Lower bearing seized * 721,581 km * First registration 15.11.2016 Ljdpoxtd E Isfx Amvjag * Net price * All information subject to change

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Laodpfefi Nmwjx Amveg Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Ljdpjz D Taasfx Amvjag Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2007, loading space length: 13,410 mm, loading space width: 2,520 mm, loading space height: 2,650 mm, total length: 14,000 mm, total width: 2,600 mm, wheelbase: 8,910 mm, color: other, Year of construction: 2007, Equipment: ABS, tail-lift, = Additional options and accessories = Lajdpfx Amoz D H Evevog - Air Suspension - Cooling Engine - Disc brakes - SAF Assen - Tailgate = More information = Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 8.600 kg Carrying capacity: 33.400 kg GVW: 42.000 kg Tail lift: D`Hollandia, tail lift APK (MOT): tested until 07/2027 Registration number: OJ-90-ZX

Condition: new, Year of construction: 2026, The Cormak M250S is a professional bench grinder that combines high precision, reliability, and durability. Thanks to its robust design based on a solid rotor equipped with bearings from NSK, one of the world's leading bearing manufacturers, it ensures quiet and stable operation both in demanding workshop environments and during occasional home use. This is a double-disc bench grinder with a base, equipped with a powerful 0.9 kW motor that generates high torque – essential for efficient material removal as well as fast and uniform surface finishing. The three-phase 400 V power supply ensures stable operation even during long-term use. This stationary grinder is equipped with two grinding wheels measuring Ø250 × 32 mm, allowing the machining of larger elements made of wood, metal, or plastics. Lightweight yet durable plastic guards provide safe operation and protect the operator from sparks and debris. An additional advantage of this bench grinder with a base is the intuitive control panel and the possibility of connecting a dust extraction system, which significantly improves working comfort and hygiene. Why choose the Cormak M250S grinder? Double-disc design with a solid base – ideal for stationary operation Quiet and reliable 0.9 kW motor powered by 400 V Large Ø250 mm grinding wheels – fast and precise grinding Safe plastic guards – improved user comfort and protection Compatibility with dust extraction systems – cleaner working environment The Cormak M250S double-disc grinder is an indispensable machine for every workshop, woodworking shop, and metalworking facility. If you are looking for a reliable and durable machine capable of handling various materials, the Cormak M250S bench grinder with a base will be an excellent choice. Technical specifications Parameter Value Grinding wheel size 250 × 32 mm Grinding wheel bore 32 mm Grinding wheel grit K36 / K60 Speed 2960 rpm Motor power S1 0.9 kW Motor power S6 1.5 kW Lasdpsvlkvhofx Amvog Voltage 400 V Dimensions 530 × 310 × 1150 mm Weight 32.5 kg S1 – motor power during continuous operation under full load. S6 – motor power during intermittent operation with idle periods accounting for up to 40% of the duty cycle.

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Ledpsrn Sqhsfx Amveag Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: new, maximum load weight: 14,580 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, NEW VEHICLE!! TO RENT, BUY OR RENT AND BUY BY ARRANGEMENT!! Meiller roll-off trailer with steel frame / container lengths up to 7.00m / NEW VEHICLE! ----* Manufacturer: Meiller * Type: BTA MG18-ZL 5.4 - roll-off trailer * First registered: - (NEW VEHICLE) * Total weight: 18,000 kg * Empty weight according to manufacturer: approx. 3,420 kg * Payload: 14,580 kg * Axles: 2x BPW axles/disc brakes * Suspension: ZL air suspension with lowering device * Tires: 265/70 R 19.5 profile S / twin tires * ABS/EBS * Container lengths from 5.00m to 7.00m Laedjq Hnkxjpfx Amveg * Drawbar 40 eyelet * Container lengths 5.00 to 7.00m * Drawbar length 2.60m * Drawbar eye 50mm * Bogie with low-maintenance ball bearing steering ring * Aluminum air tank * 4 pneumatic, Four locks integrated into the cross members * automatic locking of the container after coupling the trailer to the towing vehicle * Smartboard * 1x LED work light * 1x tool box on the right * 1x open tool box on the left * Single fender with splash guard mats * LED license plate lighting * LED tail lights and additional LED reversing lights * continuous splash flap on the underrun protection NEW VEHICLE!! AVAILABLE FOR RENT, PURCHASE OR RENT AND PURCHASE BY ARRANGEMENT!!

Condition: new, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, Dimensions and Weights External length approx. 6,896 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,310 mm Rollway length approx. 6,880 mm Wheelbase 5,100 mm Complete empty weight 3,860 kg Gross weight approx. 18,000 kg Payload 14,140 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis with cross members, welded box-type idler beams made of QSTE steel 4 pneumatically operated container locks Side guards closed according to Directive 89/297/EEC. Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40mm, outer diameter 110mm, thickness 30mm Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 4300 mm, wheel mounting by centering according to DIN 74 361 Part 3. Braking system Compressed air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system in accordance with Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice 1 x 15-pin connector 6 LED side marker reflectors with flashing lights 2 white LED front marker lights 2 LED rear lane departure lights, separately mounted 1 LED reversing light Wheels/Tires Regional transport tires: 4 tires 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles serve to protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders Laedovynaaopfx Amvsg 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box Paintwork Chassis color: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions Side protection device, closed Hanging net box, galvanized EBB sticker DEKRA certificate All information No guarantee. Errors excepted. Prior sale possible.

Condition: new, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, Dimensions and Weights External length approx. 6,896 mm Overall width approx. 2,500 mm Laedjvynagjpfx Amvsg Loaded ride height approx. 1,310 mm Rollway length approx. 6,880 mm Wheelbase 5,100 mm Complete empty weight 3,860 kg Gross weight approx. 18,000 kg Payload 14,140 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis with cross members, welded box-type idler beams made of QSTE steel 4 pneumatically operated container locks Side guards closed according to Directive 89/297/EEC. Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40mm, outer diameter 110mm, thickness 30mm Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 4300 mm, wheel mounting by centering according to DIN 74 361 Part 3. Braking system Compressed air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system in accordance with Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice 1 x 15-pin connector 6 LED side marker reflectors with flashing lights 2 white LED front marker lights 2 LED rear lane departure lights, separately mounted 1 LED reversing light Wheels/Tires Regional transport tires: 4 tires 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles serve to protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box Paintwork Chassis color: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions Side protection device, closed Hanging net box, galvanized EBB sticker DEKRA certificate All information No guarantee. Errors excepted. Prior sale possible.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Lsdpfxeyh S Aie Amvoag Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, axle configuration: 3 axles, first registration: 03/2009, color: other, Year of construction: 2009, Empty weight: 9.210 kg Axle 1: left 14 mm right 14 mm Ledpfx Amswhn S Dsvsag Axle 2: left 16 mm right 16 mm Axle 3: left 16 mm right 16 mm

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Lasdsx Nuftepfx Amvjg Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" king pin, tilting cylinder: Hyva Axles and Suspension: Disc brakes 22.5” SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit adaptation, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice on Alcoa Dura Bright aluminum rims in 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with swiveling foot, rear without support Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights installed at the level of the pivot bearing in aluminum consoles according to standard 97/28/CE-2007/35/CE, 1 LED work light on the vessel, yellow warning light at the rear mounted at the height of the hose pipes, 2x reverse lights in the underrun protection, 2x reverse lights at the height of the supports (each switchable at the power console) Tank Specification: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, capacity 47,000 liters, 24-month tank warranty from delivery. Operating parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with swiveling and folding covers. Each cover is sealed under pressure with 4 wing nuts, rubber support for domed covers at the top for storage, rain strip closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for material loosening, discharge cone swivels laterally, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5” stainless steel air manifold pipe mounted on the right-hand operator side, a stainless steel air distribution pipe 4” mounted at the rear of the tank, air valves (shut-off flaps) in INOX, top air hose and air connection hoses feature 2” STORZ couplings, Micron filter, vacuum valve at the top of the tank, 1x vibrator 1m before the pivot bearing Access Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail with a separate foldable ladder section deployable from below with parking brake when open, 1 aluminum safety walkway along the upper left side of the tank, anti-slip coating on the tank Conveying Hose Storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design

Condition: good (used), mileage: 196,934 km, power: 70 kW (95.17 HP), first registration: 10/2012, fuel type: diesel, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 75 l, color: grey, driver cabin: day cab, emission class: euro5, number of seats: 3, total length: 5,910 mm, total width: 1,990 mm, permissible axle load (axle 1): 1,650 kg, permissible axle load (axle 2): 2,250 kg, Year of construction: 2012, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Rear work lights - Front work lights Lsdpfsz D Tzdsx Amvoag - Passenger airbag - Passenger seat - Third brake light - Electric windows (front) - Driver airbag - Remote central locking - Windshield - Enclosed cabin - Cabin - Front center armrest - Fog lights - Radio/CD player - Disc brakes - Side airbags - Side door - Side bars - Running boards - Automatic heater - Two rear doors - Partition without window = Additional Information = General Information Number of doors: 5 License plate: VH-519-Z Technical Information Number of cylinders: 4 Engine displacement: 2,143 cc Maximum front axle load: 1,650 kg Maximum rear axle load: 2,250 kg Weights Unladen weight: 2,176 kg Payload: 1,324 kg GVWR: 3,500 kg Max. towing capacity: 2,000 kg (unbraked 750 kg) Condition Optical condition: good

Condition: used, Year of construction: 2021, functionality: fully functional, disc diameter: 400 mm, rotational speed (min.): 915 rpm, power: 1.5 kW (2.04 HP), grinding wheel diameter: 400 mm, type of input current: three-phase, Equipment: emergency stop, motor brake, Felder disc sanding machine CB 400 D, acquired on April 13, 2021, for precise disc sanding of wood workpieces. Suitable for edges, end faces, small components, curves, and fine adjustments in the woodworking shop. Key technical data: - Machine type: Disc sanding machine - Model: CB 400 D - Sanding disc: approx. Ø 400 mm - Speed: approx. 915 rpm - Motor power: approx. 1.5 kW - Voltage: 400 V - Dust extraction connection: approx. Ø 100 mm - Table size: approx. 460 x 200 mm Laodpfxeztxpnj Amveg - Table tilt: approx. -45° to +45° - Dimensions: approx. 770 x 460 x 1130 mm Features: - Practical machine for precise finishing and clean workpiece edges - Suitable for edge and contour sanding, adjusting wood components, and finishing work - Of interest for carpentry shops, model making, training, and makerspaces Warranty exclusion

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration Laedpfx Ajzvlm Eemvog

Condition: used, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2003, next inspection (TÜV): 03/2027, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 93 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2003, Equipment: ABS, 3-axle Kögel SN 24 Standard Tautliner VIN: 717108 Chassis / Components: * Air suspension // Raise and lower * Lift axle * Haacon support legs * 3 x BPW Eco Plus axles with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front approx. 50/30%, Middle approx. 50/60%, Rear approx. 40/30% * Fifth wheel height approx. 1,150 mm * 1 x PVC storage box Body: * Tautliner Standard * Certificate EN 12642 Code XL * Edscha * Side curtains * Lashing eyes per side Weights: * Gross vehicle weight: 35,000 kg * Tare weight: 6,800 kg * Payload: 28,200 kg Other: * German vehicle * MOT (TÜV) ---- Laodpjz D Ny Asfx Amvjg New MOT/technical inspection and weight adjustments (increase or decrease) are available upon request. _____ We don't leave you alone even after the purchase: We will assist you in obtaining export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and spelling errors, and prior sale. _____ About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, it's not just the vehicle that counts, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably – from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! _____ Our service for you: Vehicle loading We will help you with loading your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term license plates We will assist you in obtaining export or short-term license plates. Customs formalities We will also support you with customs matters. Vehicle transport Upon request, we will arrange for the transport of your vehicle within Germany.

Condition: used, Year of construction: 2011, EMCO Hyperturn 45 – CNC Turning Machine - Siemens SINUMERIK CNC control system - Main spindle equipped with a full clamping cylinder (operation with bar feeder not possible; loading and unloading via automatic swing loader, see video) - Year of manufacture: 2011 Technical Data Working Area: - Maximum swing diameter over bed: 430 mm - Swing diameter over cross slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar capacity: 45 mm - Distance between main and counter spindle (spindle noses): 720 mm Slide Travel Range: - Slide travel X / X2: 160 / 150 mm - Slide travel Z / Z2 / Z3: 510 / 510 / 510 mm Main Spindle (Spindle 1): - Spindle mount – DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (internal diameter): 85 mm - Maximum mass moment of inertia for clamping device and workpiece: 0.08 kgm² Main Spindle Clamping System: - Hollow clamping cylinder (hydraulic) with draw tube, max. bar passage: 45 mm - Max. standard chuck size: 160 mm Main Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (infinitely variable): 0 – 7,000 rpm - Max. spindle torque: 100 Nm Counter Spindle (Spindle 2): - Spindle mount – DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (internal diameter): 85 mm - Z3 travel: 510 mm - Traverse speed: 45 m/min - Maximum mass moment of inertia for clamping device and workpiece: 0.08 kgm² - Counter spindle clamping system: hollow clamping cylinder with draw tube and integrated pneumatic parts ejector - Max. chuck size: 160 mm Counter Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (infinitely variable): 0 – 7,000 rpm - Max. spindle torque: 100 Nm C Axes (Spindles 1 and 2): - Circular axis resolution: 0.001° - Rapid traverse speed: 1000 / 100 rpm - Spindle indexing (disc brake): 0.01° Feed Drives: - Rapid traverse X / Z: 30 / 45 m/min Laodpfoyglx Rjx Amvsg - Feed force X: 4,000 N - Feed force Z / Z2 / Z3: 5,000 / 5,000 / 6,000 N - Position scatter width Ps per VDI 3441 in X / Y / Z: 3 / 3 / 3 µm Turrets 1 and 2 (upper and lower system): - Radial tool turret with directional logic and driven tools - Number of tool stations per turret: 12 - Tool holders according to DIN 69880: VDI 25 - Tool cross-section (square tools): 16 × 16 mm - Boring bar shank diameter: 25 mm - Turret indexing time: 0.2 s Driven Tool Stations (coupling according to DIN 5480): - Number of driven tool stations per turret: 12 - Speed range: 0 – 6,000 rpm - Maximum drive power: 4 kW - Maximum torque: 16 Nm - Maximum duty cycle at maximum speed or power: 25% Lubrication System: - Guideways, ball screws: automatic central oil lubrication - Main spindle, counter spindle: grease lubrication Chip Conveyor: - Hinged belt conveyor, discharge height: 1,200 mm Electrical Connection: - Power supply: 400 V ~3/PE - Machine connected load: 30 kVA - Max. main fuse for the machine: 80 A - Required short-circuit power: 2,500 kVA Dimensions / Weights: - Height of spindle axis above floor: 1,126 mm - Overall height (incl. oil mist separator): 2,325 mm - Footprint (incl. chip conveyor, without cooling unit): 3,830 × 1,950 mm - Net weight of the machine without chip conveyor: 4,200 kg Sound Pressure Level: - Average sound pressure level: 78 dB(A)

Condition: new, maximum load weight: 29,880 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,410 mm, loading space width: 2,346 mm, loading space height: 1,765 mm, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,230 mm, Year of construction: 2026, Equipment: ABS, Wielton Strong Master Hardox steel tipper with a 30 m³ payload volume HP tipper Immediately available Overlapping swing gate with grain discharge chute New vehicle, immediately available! Unladen weight approx. 6,120 kg Equipment: - SAF disc axles - Axle lift with control line - Automatic tilting lowering - SAF geared landing gear, full load capacity - KNORR braking system - Semi-circular Hardox tipper body - Floor 4 mm / side wall 3 mm - Overlapping swing gate with lateral tension lock - Grain discharge chute in the center + additional swivel locks - Double swing bearing and replaceable rubber seal Lsdpozzhaxofx Amvjag - Roll cover with quick-release fastener - Operating platform on the frame - Hydraulic cylinder Hyva 250 bar - Tires 385/65 R22.5 Hankook TH31 - Steel rims - Rear lights, full LED Aspöck - 2x LED reversing lights - Tool box - Water tank Subject to prior sale and errors in this offer. Only the agreements in the order confirmation or the purchase contract are binding. You will receive detailed information on the exact scope of equipment and prices from our sales team. Please contact us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS CUTTING PERFORMANCE Max. sheet thickness: 10 mm Max. working width: 3,080 mm Cutting speed: 20 mm/min CONTROL AND DRIVE Control: CNC Control system: Delem DAC-350 Drive type: Hydraulic Connection power: 30 kW SETTINGS AND FUNCTIONS Back gauge type: Electric Angle adjustment: Motorized Shear gap adjustment: Motorized Sheet support device: Pneumatic Table type: Ball bearing table MACHINE DETAILS MACHINE DATA Year of manufacture: 2007 Serial number: 621307509 CE marking: Present CE certificate: Not available Documentation: Present DIMENSIONS AND WEIGHT Length: 4,980 mm Width: 2,400 mm Height: 2,200 mm Lsdpfx Aoz Ebcfsmveag Weight: 11,500 kg TRANSPORT DATA Transport length: 4,985 mm Transport width: 2,400 mm Transport height: 2,200 mm Transport weight: 11,500 kg Transport packages: 1 piece EQUIPMENT Electric back gauge Pneumatic sheet support device Fixed finger guard with flip-up protection Ball bearing table Motorized angle adjustment Motorized shear gap adjustment

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V total power requirement 2.0 kW weight of the machine ca. 23.0 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes Lajdpfx Amjxak H Sjvsg - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: good (used), Year of construction: 2006, functionality: fully functional, Tank volume: 60 liters and 30 liters Motor power: 1.9 kW Power supply: 3 x 400 V (three-phase current). Speed: Continuous mechanical regulation (variator) in the range of approximately 53 to 288 rpm. Lasdpfx Aezwmxljmvog

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Lodpfxox Nugde Amvsag Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured using a self-supporting aluminum structure with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension: disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering mechanism, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting assist (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension. Tires and Wheels Lajdpfx Amjy U Syrjvsg 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, mounted on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg). Kingpin Aluminum landing gears, manufacturer: Alu-Leg, 2 x 10 ton support load, swivel feet for air suspension. Braking System According to E.E.G. standards, two-line braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines, with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpins, 1 LED work spotlight inside at the front left, operated from the outside. Body/Tipping Body - Body fully welded inside Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt, plank profiles fully welded inside! Floor as a sliding floor system mounted on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a tapered design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 4 swivel locking rods, mounted in the welded aluminum rear frame in Teflon and stainless steel bearings, running aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar lining" for complete discharge, lateral brush seal and additional Kevlar lining on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24 plank system - smooth design! Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, or without hydraulic hoses. Accessories PVC mud flaps w