Used Behringer 2008 Behringer Hbp 513 A for sale (68,770)

Condition: used, mileage: 440,411 km, power: 65 kW (88.38 HP), first registration: 05/2008, fuel type: diesel, overall weight: 3,000 kg, gearing type: mechanical, number of seats: 2, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: 13-pin trailer socket, 100 Ah battery, 1-pole battery disconnect switch, rear door (opening angle 270 degrees), wooden floor in the cargo area, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, seats in the cab: double passenger seat, front stabilizer, step for the rear door, lining in the cargo/passenger compartment: plywood Additional equipment: 3rd brake light, driver's airbag, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake assist, headliner in the cab, lockable glove compartment, body/superstructure: high-roof van, child safety lock, fuel tank: main tank 75 liters, continuous cargo area partition, load securing/tie-down points, headlight range adjustment, engine 2.1 liters - 65 kW CDI CAT, wheelbase 3665 mm, low emissions according to exhaust standard Euro 4 Group III, sliding door cargo/passenger compartment on the right, maintenance interval indicator Assyst, heat-insulating glazing, permissible total weight 3.00 t Bwedpfxjkq Al Ne Af Dor * WDB9066131S280012 * First registration: 20.05.2008 * Net price Tel./WhatsApp:

Condition: used, mileage: 375,516 km, power: 107 kW (145.48 HP), first registration: 04/2008, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, * Iveco Daily 35 C 15 * Long flatbed * Twin tires * Manual transmission * VIN: ZCFC35A8005730261 * Engine Type: F1CE0481F * kW: 107 * Displacement: 2998 cc * Tare weight: 2470 kg * Payload: 955 kg * Gross vehicle weight: 3500 kg * Internal length of flatbed: 4.10 m * Internal width of flatbed: 2.10 m * Vehicle length: 6820 mm * Vehicle width: 2200 mm * Vehicle height: 3100 mm * Wheelbase: 3750 mm * Tires: 195 / 75 R 16 Bsdpfxsr Npgtj Af Dewr * Alternator defective * Subject to differential tax * All information without guarantee

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 06/2008, loading space length: 13,620 mm, loading space width: 2,470 mm, loading space height: 2,730 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,660 mm, color: white, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = Bwedpfxoy T Ntms Af Djr - Rear doors - Air suspension - Fog lights - Spare wheel - Disc brakes = Further Information = Axle configuration Tire size: 385/65 R 22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 6,300 kg Payload: 23,700 kg GVW: 30,000 kg Functional Body manufacturer: HERTOGHS Condition Technical condition: good Optical condition: good Identification License plate: OK-58-KX

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 07/2008, loading space length: 9,800 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, total length: 12,250 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 265/70R19,5, wheelbase: 6,980 mm, color: white, Year of construction: 2008, Equipment: ABS, tail-lift, = Additional Options and Accessories = - Electronic Braking System (EBS) - Air suspension = Further Information = Axle Configuration Tyre size: 265/70R19.5 Bedpfsy Shfrjx Af Dewr Brakes: Disc brakes Suspension: Air suspension Front axle: Twin tyres; Max. axle load: 10,000 kg; Steered; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50% Rear axle: Twin tyres; Max. axle load: 10,000 kg; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50% Weights Unladen weight: 8,140 kg Pay load: 11,860 kg Gross vehicle weight (GVW): 20,000 kg Functional Tail lift: ZEPRO, 1,500 kg Refrigeration: from -29 °C to +25 °C Refrigeration unit: Diesel and electric (6,500 operating hours diesel; 490 electric) Wall thickness: 8 mm Condition Technical condition: good Optical condition: average

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turning and milling parts, equipped with integrated spindle motors (ISM) on both main and sub-spindle, featuring a thermal compensation system (liquid-cooled). Drive power: Main spindle: 29 kW Sub-spindle: 22 kW Speed range: Main spindle: 0-5,000 rpm Sub-spindle: 0-7,000 rpm Spindle interface (DIN 55026): Main spindle: KK6 (max. bar capacity 65 mm) Sub-spindle: KK6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute resultant cutting forces over two axes, providing exceptional rigidity for all machining operations. All linear axes feature preloaded roller guides, a digital drive system, integrated spindle encoder, and state-of-the-art SINUMERIK 840D control. Includes: * Hollow clamping cylinder with draw tube * Parts ejector and flushing system through the sub-spindle * 2 x 12-position VDI 30 tool turrets, radial mounting with direction logic, accommodating up to 2 x 12 driven tooling stations * Swivel speed adjustable via feed selector Performance data: Max. 6.7 kW at 2,650 rpm Constant torque: 25 Nm Speed range: 0-5,000 rpm - C-axis for main and sub-spindle - TRANSMIT software for simple C-axis programming * Finished parts unloading device * Sinumerik 840D * Chip conveyor with programmable discharge height of 1,200 mm (hinged belt type) * Integrated coolant system in the chip conveyor: 2 high-pressure pumps at 14 bar 2 rinsing pumps at 3.7 bar * Electrical cabinet cooling unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Documentation IMPORTANT: Export/re-export from the EU requires an export license R7AW2001 – Year of manufacture: 2008 Including: S6Z170 PC keyboard Siemens R7Z460 Machine installation and mounting hardware Bwsdpfx Aoy Svz Isf Dsr X1Z100 EMCO standard bar feeder interface R7Z030 Alarm lamp R7Y750 Finished part transfer conveyor, crosswise S6Z900 EMCO TOPLOAD 10-65/3300 R7Z620 Automatic tool setter – HT665 S6Z110 Setting gauge VDI 30 + Various static and driven tool holders + Clamping devices for main spindle and sub-spindle

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 1,850 h, axle configuration: 4x4, load capacity: 220 kg, mast type: telescopic, lifting height: 16,900 mm, lifting power: 220 kg/m, platform length: 1,200 mm, platform width: 920 mm, overall weight: 7,225 kg, construction height: 2,040 mm, fuel type: electric, tire size: 24 × 7.5 in / 600 × 190 mm, tire condition: 80 %, wheelbase: 2,000 mm, color: red, Equipment: UVV, all wheel drive, === MAIN SPECIFICATIONS === Year of manufacture: 2008 Operating hours: 1,850 h Max. platform capacity: 220 kg Boom type: Articulated Jib: Telescopic Rotation: Continuous (360°) Platform rotation: Yes (66° right / 59° left) Platform size (L × W): 120 × 92 cm Tailswing: 7.0 m Tyres: Non-marking solid Power supply: Electric Max. working height: 16.51 m Max. outreach: 9.0 m Weight: 7,225 kg CE certification: Yes Remote control: No === HIGHLIGHTS === Fully reconditioned machine in excellent working condition Bjdsxa Eqlopfx Af Djwr CE-certified with full documentation Ready for immediate use and transport Ideal for both indoor and outdoor applications Quiet and smooth electric drive === CONDITION === Fully refurbished and tested – very good condition (4/5) Battery checked and operating perfectly Available immediately from our Sittard stock === LOCATION & DELIVERY === Located in Sittard, the Netherlands Worldwide delivery available Price excl. VAT: € 12,750 (EXW) Price incl. 21% VAT: € 15,427.50 The Manitou 170 AETJ is a reliable articulated electric boom lift with a 16.51 m working height and 9 m outreach. Perfect for maintenance and installation tasks in tight or indoor environments. Professionally inspected, reconditioned, and ready for immediate use. An efficient and sustainable choice from the Collé Rental & Sales fleet. === DELIVERY === Crane loading available on request for hassle-free handling at departure. Flexible shipping options tailored to your destination and logistics preferences. All transport handled professionally by the Collé Rental & Sales logistics team.

Condition: ready for operation (used), 1 x stitching unit HS350 2 x stitching heads Hohner 52/8  6 x section feeders ( 5 x verticle, 1 x flat) 1 x cover folder feeder UFA350 Bwedpfsir A Ixjx Af Dor 1 x three knife trimmer TR350 1 x stacker delivery

Year of construction: 2008, condition: used, overall weight: 75 kg, terms of delivery: FCA Pegnitz delivery time: on request Bwedewyfm Nspfx Af Djr terms of payment: 100% prior to delivery

Year of construction: 2008, operating hours: 133 h, condition: used, JBM - Wood Chipper Type 630 MDX on Single-Axle Chassis / Car Trailer Bedpfeyxkncjx Af Djwr > Kubota diesel engine 44 kW (60 HP) > Sprung, braked single-axle chassis > Wide feed: 310 x 220 mm > Max. log diameter: up to 220 mm > Adjustable wood chip length: 0 – 25 mm > Weight approx. 1,690 kg > Only 133 hours! > Year of manufacture: 2008 On request, we can provide a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted. = Further Information = Please contact Tobias Ebert for more details.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 800425, Labelling of cardboard boxes with an Italian vignette top label and 2-sided sealing labels. The sealing of the reverse tuck-in flaps must be performed over the leading corner (right side) and over the trailing corner (left side), viewed in the product flow direction, which is from left to right. Working height: 810 mm +50 mm/-20 mm Labeller: 1 HERMA 400 PPS 8 L vignette labeller 2 HERMA 400 PPS 8 L/R seal labellers Product description: Cardboard boxes: Actual sizes (A x B x H / mm): 68 x 56 x 143, weight approx. 90 g 85 x 85 x 210, weight approx. 170 g Bwjdoyr Hdrjpfx Af Djr Label specification: Label size: Vignette label: 40 x 25 mm, winding specification 5 Seal label: 15 x 25 mm Label make: Core inner diameter: 76 mm Reel outer diameter: 300 mm Winding outside

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake Bedeu Nvwvspfx Af Djwr >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, mileage: 329,823 km, power: 95 kW (129.16 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 2,150 kg, overall weight: 5,000 kg, axle configuration: 2 axles, wheelbase: 3,665 mm, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Equipment: ABS, airbag, central locking, electronic stability program (ESP), Power/Engine: 2,143 cm³ Axles: 4x2 Brakes: ASR, disc brakes Driver's cab: multifunction steering wheel, tinted windows, electric windows, electric. Outside mirrors, outside temperature display, audio system, tachograph Refrigeration body: Carlsen, bunker doors/ice, 5 doors on the left, number of doors on the right 5 doors Refrigeration unit: cooling down to -33°C °C Other equipment: power steering, immobilizer Registration/documents: previously registered in Germany ID: 118074 The eutectic plates are new New plates 5.0 ton front axle with increased load capacity Electronic stability program (ESP®) Rear spring harder Multifunction steering wheel with trip computer Hill start assist Battery management Radio preparation Lockable glove compartment Heated and electrically adjustable outside mirrors Storage above the windshield Convenient opening and closing with IR remote control 6-speed manual transmission ECO Gear Heat insulation in the driver's compartment Auxiliary hot water heating Heat-insulating glass all around with band filter on the windshield Radio remote control for additional hot water heating Wheelbase 3665 mm (BM-forming code) Instrument cluster with pixel matrix display Service interval display ASSYST Tank sender for additional heating Automatic headlight switch-off to parking light Clearance lights Electrics for body interior lighting Exit lights Adaptive brake light Engine OM 651 DE 22 LA 95 kW (129 HP) 3800/min Engine version Euro V Adjustable passenger seat Armrest for driver's seat, ISO-fix (child seat fastening system) Armrest for passenger seat, rear center armrest (FFO) Driver airbag Driver's seat Suspension seat Thorax sidebag for driver (in seat back) Windowbags for driver and front passenger Smoker's package Video link on YouTube: Plate cooling is a cooling system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power grid (380V) overnight. The solidification point of the eutectic solution is -33 ° C. The eutectic plates are used to maintain the temperature of the already frozen product. We always have a large selection of used refrigerated and ice cooling vehicles in stock. You can find more of our offer under Non-binding offer, sale only to traders, errors and prior sale reserved Bwodet Nbdaopfx Af Djr

Condition: used, maximum load weight: 13,880 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2008, * Call (Contact · Phone · Mobile · WhatsApp) * Trailer · Technical Data & Dimensions * Brand / Manufacturer: Obermaier / Kals * Model: OD2-L180L * Configuration: 2-axle flatbed for building materials * VIN: WOD2000008E007049 * Year of manufacture: 27/06/2008 * Weights * Unladen weight: 4,120 kg * Technically permissible gross mass: 18,000 kg * Permissible total weight: 18,000 kg * Payload: 13,880 kg * Drum brakes Axle loads: * 1st axle: 9,000 kg * 2nd axle: 9,000 kg Tyres Bwjdpfx Ajx Suwbef Dsr * Tyres: 385/65 R22.5 * Load index / Speed index: 160K Loading area dimensions * Internal length: approx. 6,500 mm (6.5 m) * Internal width: approx. 2,450 mm (2.45 m) * Side wall height (side panels): approx. 1,000 mm (aluminium side boards) Loading height * Platform height unladen (ground to platform bed): approx. 1,510 mm * Net * Price upon request

Condition: used, mileage: 446,713 km, power: 265 kW (360.30 HP), first registration: 12/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro4, Equipment: air conditioning, all wheel drive, Tel.: call (Contact · Phone · Mobile · WhatsApp) * MAN TGS 28.360 6x2-4 BL All-wheel Drive * Garbage truck * Vehicle data: * Body type: Garbage truck * Drive: All-wheel drive (6x2-4) * Lift: available * Trailing axle: steerable * Transmission: manual gearbox * Retarder * Technical data: * VIN: WMA84SZZ89L055492 * Engine type: D2066LF36 * Displacement: 10,518 cm³ * Power: 265 kW (360 hp) * Emission standard: Euro 4 * Technically permissible gross weight: 28,000 kg Bjdpexrx Afefx Af Dewr * Permissible gross weight: 26,000 kg * Unladen weight: 9,720 kg * Axle loads: * Front axle: 8,000 kg * Drive axle: 11,000 kg * Trailing axle: 8,000 kg * Tire size: * 315/80 R22.5 156/150K – 22.5×9.00 * 3rd axle: 385/65 R22.5 160K – 22.5×9.00 * Year of manufacture: 17.12.2008 * Price on request * All information without guarantee

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Bjdpfx Ajzq A Ipsf Dewr Pressing force: 130 tons

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank The scope of delivery includes: Bwedpohrdl Tefx Af Dor 1x shelf, grade II Material color: Sendzimir galvanized Length: approx. 1,285 mm Depth: approx. 340 mm Height: approx. 30 mm Weight/piece: approx. 4.30 kg Technical data for the shelf: Manufacturer: SSI Schäfer Type: R3000 Type designation: ZB1351308V Maximum load per shelf 150 kg with evenly distributed load General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelving systems. Delivery with our own fleet (without unloading)

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: Rod20x10RES, ABUS ZHB overhead crane runway, approx. 20x10m Load capacity / lifting capacity: 1000 kg (1 ton) Technical data: Runway made of ABUS HB250 rails The system is delivered complete: ABUS HB rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Abus GM electric chain hoist, travel drives, and pendant control Lifting height approx. 3.5 m The crane is dismantled and available immediately Rail color is affected by oil mist Used condition, see pictures Bedjxr S Dcspfx Af Djwr Item location: 75053 Gondelsheim Shipping by freight forwarding or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: used, axle configuration: 3 axles, first registration: 05/2019, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2019, Tyre size: 385/65 R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 7 mm; Tyre tread right: 7 mm Rear axle 2: Tyre tread left: 10 mm; Tyre tread right: 15 mm Rear axle 3: Tyre tread left: 6 mm; Tyre tread right: 5 mm Damages: none Bwsdpfjzrbkxex Af Djr

Condition: used, axle configuration: 3 axles, first registration: 09/2015, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2015, Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: tyre tread left: 5 mm; tyre tread right: 2 mm Rear axle 2: tyre tread left: 6 mm; tyre tread right: 5 mm Rear axle 3: tyre tread left: 2 mm; tyre tread right: 5 mm Weights Unladen weight: 6,730 kg Payload: 32,270 kg Gross vehicle weight: 39,000 kg Condition Damages: none Bedpfx Afezrbhds Dswr

Condition: used, axle configuration: 2 axles, first registration: 02/2016, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2011, Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Rear axle 2: Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Bsdpezrbaajfx Af Dewr Damage: None

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 10019781, total length: 894 mm, total height: 1,746 mm, total width: 650 mm, overall weight: 330 kg, type of input current: three-phase, input voltage: 400 V, Like-new, high-performance circular saw machine from Berhinger Eisele. Max. 10 operating hours. Designed to accommodate saw blades up to 350 mm in diameter. Min./max. cutting range at: Bodezrlnujpfx Af Dewr 90° 45° Round (in mm) 10 / 120 10 / 120 Square (in mm) 8 / 100 8 / 100 Rectangle (in mm) 8 x 8 / 170 x 100 8 x 8 / 120 x 100 With continuously adjustable hydro-pneumatic feed, pneumatic maintenance unit, pole-changeable three-phase motor, 400 V, 50 Hz, 1.4/1.9 kW, including automatic clamping device to the left and right of the saw blade, stationary base with integrated coolant system and chip drawer, material support height 900 mm. Operating pressure of 6–8 bar required. Machine design complies with CE standards. Saw machine is designed for a voltage supply of 400 V / 50 Hz (3LNPE400V/50Hz). With continuously adjustable hydro-pneumatic feed, automatic clamping device to the left and right of the saw blade, pneumatic maintenance unit, pole-changeable three-phase motor, 400 V, 50 Hz, 1.4 / 1.9 kW. With additional gearbox for 4 speeds: 10/20/40/80 RPM. With clamping pressure reduction. With micro-spray system with coolant system, i.e. spraying or cooling can be selected. Incl. electrical equipment according to VDE 0.113 and CE compliant, ready for operation. Incl. initial equipment package for steel, consisting of: 1 pc Saw blade HSS 350x3.0x40 Z = 280 ZT04 1 pc Saw blade HSS 350x3.0x40 Z = 180 ZT 06 1 pc Saw blade HSS 350x3.0x40 Z = 110 ZT10

Condition: repair required (used), Year of construction: 2001, machine/vehicle number: 794, functionality: limited functionality, Boring and sawing machine. Bsdpfx Afjzrl Eas Djwr From 2001 to 2011: operated in a three-shift system From 2011 onwards: operated in a two-shift system Sawing machine: fully functional Boring machine: functional on 2 out of 3 axes Machine is currently running.

Condition: used, empty load weight: 3,750 kg, maximum load weight: 9,750 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 01/2014, loading space length: 5,040 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55R19,5 148J, color: other, gearing type: other, front tire size: 385/55R19,5 148J, rear tire size: 385/55R19,5 148J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Drop-side panels, wide tires, lashing eyes, surcharge for ramps: €900 net, subject to printing errors, errors and changes, sample images, more details at: ! Bjdpfx Afjzrqiwo Dswr

Condition: used, empty load weight: 3,690 kg, maximum load weight: 9,810 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 09/2019, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 48 m³, suspension: air, tire size: 285/70R19,5 148J, color: other, gearing type: other, front tire size: 285/70R19,5 148J, rear tire size: 285/70R19,5 148J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, , --  Misprints, errors and changes reserved, Sample pictures --, More details at: !, More details: ! Bjdpjzrqf Sofx Af Dewr

Condition: used, Year of construction: 1982, machine/vehicle number: 82/MA/7, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, Equipment: documentation/manual, Year of manufacture 1986 Fully functional Cutting height (max.) 180 mm Cutting width (max.) 350 mm Saw blade diameter 350 mm Saw blade bore 80 mm Disc diameter 350 mm Description A.COSTA LEOPARD / S Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Max. disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-ejection latches Weight: ± 6.000 kg Spare sleeves, spacers, saw blades Total length: 400 cm Number of rollers: 2 straight, 14 angled. Bwjdpfxjzhh Uvj Af Dsr TOTAL: 16 lower rollers + 2 upper rollers Pneumatic clamping of upper rollers