Used Berg & Schmid Mks 350 for sale (8,257)

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Working height from to 80 - 220 mm table surface area 120 x 60 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Hand presses with rack HZ 250 Crjdsfv Av Ispfx Adreh The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank Credpofv Avvsfx Adreh comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy Cedpjfgyh Uefx Adrerh • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which Csdpfx Adsfg E Hnersrh ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m Codpfx Ajfgyifjdrerh 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly Credpefgyigjfx Adroh “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs Csdpfx Adsfg E Hmororh with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, saw blade diameter 300 mm capacity 90 degrees: round 102 mm capacity 90 degrees: square 90 mm capacity 90 degrees: flat 120x80 mm capacity 45 degrees: round 90/80 mm capacity 45 degrees: square 80/70 mm capacity 60 degrees: flat 90x70/85x70 mm total power requirement 1,5/2,0 kW weight of the machine ca. 0,135 t Csdefg Rlaepfx Adrjrh dimensions of the machine ca. 0,5 x 1,05 x 1,0 m The versatile professional metal circular saw. Convincing in performance and price. · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Spindle vice with double clamping arm for low-burr cuts · Cone safety clutch to protect the saw blades. · 2 speeds 33 + 66 rpm · Automatic cooling directly on the saw blade · Double bearing for saw head · 24 V safety switch in the handle with restart lock · Length stop, assembly tool · Closed cast, solid cast superstructures · Miter adjustment on operator side machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 93 / EUR 123)

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 Codpfx Adofg E Hlsrerh band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Outer dimensions (width x height): 80 x 80 mm Overall length: 6050 mm Divided into: 2x25/30/35/40/45/50/3x100/11x500 mm Permissible load: 200 t/m Material 42CrMo4, hardened (plasma deep-nitrided: hardness approx. 700 HV, 58 - 63 HRC, depth 0.4 - 0.5 mm), ground Cjdpfsy N S Irsx Adrjrh

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW dimensions of the machine ca. 1,9 x 1,45 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit Crodpfx Adjd Iin Eorjh · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood CNC control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 275 mm capacity 90 degrees: round 90 mm capacity 90 degrees: square 80 mm capacity 90 degrees: flat 100x70 mm capacity 45 degrees: round 75 mm capacity 45 degrees: square 70 mm capacity 60 degrees: flat 80x60 mm total power requirement 1,1/1,3 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 0,5 x0,85 x0,95 m The versatile professional metal circular saw. Convincing in performance and price. • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Cone safety clutch made of hardened steel to protect the saw blades. • 2 speeds 33 + 66 rpm • Automatic cooling directly on the saw blade • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Closed cast, massive cast superstructures • Operator side miter adjustment • Machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 70) Cedpfxjd Iipao Adrsrh

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Crodpod Iip Aefx Adrsh Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW Credpfsd Iin Hex Adrjh weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15+30 oder 30+60 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,44 t dimensions of the machine ca. 0,8 x 1,1 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic semi-automatic. (20185/ 20188) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush Cjdpfxsd Iin Is Adrjrh · Automatic cooling · Metal tension wheel for high power transmission c. · Solid, strong cast iron table Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the beginning of the material or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: new, saw blade diameter 315 mm capacity 90 degrees: round 108 mm capacity 90 degrees: square 93 mm 150 x 90 mm Working height 920 mm saw blade turning speeds 17+33 oder 33+66 U/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 0,8x0,9x1,95 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 315 HA (20154/20155) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension Cedpfx Adjd Iin Rjrjrh • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force • Spring package Semi-automatic function: 1. Saw starts 2. Clamp material 3. Rapid lowering to the beginning of the material or cut the same for series cutting 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise ATTENTION: Price is without saw blade!!! (saw blade price EUR 109)

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm Cjdpfx Adod Iiprjrsrh total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° Cjdpjd Iiptofx Adrjrh • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, saw blade diameter 250 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 95x60 mm capacity 45 degrees: round 70 mm Croded Iipbopfx Adrsh capacity 45 degrees: square 60 mm capacity 60 degrees: flat 65x60 mm total power requirement 1,0 kW weight of the machine ca. 0,075 t dimensions of the machine ca. 0,3 x0,8 x0,75 m SPECIAL PRICE!!! The ideal metal circular saw for workshop and assembly • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Optionally with 230 V or 400 V motor • Automatic cooling directly on the saw blade • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Subframe (option) additional price 172,-EUR ATTENTION: Price is without saw blade!!! (saw blade price EUR 62,-EUR)

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions Crodpfx Adsd Iipmsreh • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: excellent (used), I am offering for sale a Tektronix DPO 4032 Digital Phosphor Oscilloscope. The device is fully functional, starts up without any issues, and operates correctly. It displays the startup screen and the measurement screen, as shown in the attached photos. The cosmetic condition is good – it has normal signs of use resulting from operation. Technical specifications: • Manufacturer: Tektronix • Model: DPO 4032 • Type: Digital Phosphor Oscilloscope • Bandwidth: 350 MHz • Sampling rate: up to 2.5 GS/s • 2 analog channels • Color LCD display Codpfx Adjzru Hmorerh • Interfaces: LAN, USB Host, USB Device, VGA, CompactFlash • Power supply: 100–240 V AC, 50–60 Hz Condition: • Fully functional. • The device starts up and operates correctly. • Sold without measurement probes and other accessories. • The set includes only the oscilloscope shown in the photos.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, total length: 1,980 mm, total height: 2,150 mm, total width: 1,850 mm, type of input current: AC, distance between centers: 750 mm, input voltage: 220 V, workpiece diameter between centers: 350 mm, workpiece diameter (max.): 350 mm, year of last overhaul: 2026, overall weight: 750 kg, Technical data: – Workpiece diameter max. 350 mm Crjdpfx Adez Hd I Tsrjh – Distance between centers 0–750 mm – Measurable tooth width: 600 mm – Largest/smallest module 12–1.5 mm – Workpiece table diameter 260 mm – Installation dimensions: Length × Width × Height 1980 mm × 1850 mm × 2150 mm – Machine weight: net 750 kg Control system: Zeiss ST 57 Required power supply: 220 volts, 50 Hz, compressed air: 8 bar Machine accessories: – Basic machine with probe holder – Zeiss VAST measuring head – Zeiss quick-change probe system with 4 positions – Calibration sphere – Complete set of workpiece carriers – Auxiliary table – Probe assortment: Various measuring probes for different modules – Quick-change tool holder for holding various measuring probes / a total of 4 – New MINI computer with monitor and printer – Operating manual in English Software: Standard equipment – New software module for testing spur and helical gears, evaluating K profiles, pitch, concentricity and Klingelnberg index – Selectable software language – Evaluation according to DIN/ISO/AGMA/customer-specific tolerances

Condition: new, cutting diameter 280 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 280 mm 250 mm 350 x 200 mm 240 mm 220 mm 230 x 220 mm Credpfx Ajivuqtedrsh 170 mm 150 mm 170 x 100 mm saw tape speed 37 + 74 m/min total power requirement 1,8 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m

Condition: used, Year of construction: 1997, SCHMID T3-400 3 – TECHNICAL DATA Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 3 Machine No.: T3-400 3 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Hydraulic nutation / orbital forming press (Taumelpresse) CE marked: Yes PRESS DATA Nominal press force: 4,000 kN Equivalent press force: approx. 408 metric tons Operation: Hydraulic Working direction: Vertical Press construction: Four-column press Number of columns: 4 Forming process: Nutation / orbital forming Tool arrangement: Upper and lower tooling Operation mode: Automatic / PLC controlled HYDRAULIC SYSTEM These specifications are confirmed directly by the machine plate in your new photo: Press force: 4,000 kN Hydraulic oil capacity: 1,500 litres Lubricating oil capacity: 350 litres Maximum hydraulic pressure: 250 bar Maximum lubrication pressure: 315 bar ELECTRICAL DATA From the other T3-400 nameplate you sent earlier: Connection voltage: 3 × 400 V Frequency: 50 Hz Connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 CONTROL & ELECTRICAL EQUIPMENT Control: Siemens PLC PLC system: Siemens SIMATIC Power supply: Siemens SITOP Operator panel: Machine-mounted control panel Electrical cabinet: Integrated/separate machine electrical cabinet Automatic operation: Yes Parameter-controlled operation: Yes Emergency stop: Yes MACHINE / WORKING AREA Press frame: Four-column construction Cjdpfezvnr Rjx Adrsrh Working area: Enclosed Lower tooling: Circular die/tool mounting arrangement Upper tooling: Circular tool arrangement Automatic workpiece handling: Integrated Hydraulic lubrication: Yes Hydraulic power unit: Integrated Pressure monitoring: Yes

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Crodpfx Adjidchcsrjh Type: MSNSBG 350/2.0 S 350 GD Included in the scope of supply: 1x CS Sigma profile, used Material color: sendzimir galvanized Overall length: approx. 5,500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm