Used Bernardo Fu 1600 E for sale (72,392)

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits Dkedpfsyxdwdsx Ad Nsl • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: good (used), Year of construction: 2006, Demag systec 160/520-430 (2010) Dkedpfx Aoyyzpyed Nsl

Condition: used, mileage: 445,633 km, power: 353 kW (479.95 HP), first registration: 05/2011, fuel type: diesel, empty load weight: 14,000 kg, maximum load weight: 12,000 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,200 mm, brakes: intarder, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, differential lock, trailer coupling, Vehicle location: Bovenden. Aluminum body, long cab, 1x comfort seat, 1x sleeper berth, electric mirrors, heated mirrors, power window left, power window right, air conditioning, sun visor, 16-speed manual transmission, ABS (anti-lock braking system), Intarder, differential lock, beacon, leaf suspension, trailer coupling with air, electric and hydraulic connections, lashing rails, pendulum side panels, crane mounted behind cab, emergency stop, grab control, 2-point hydraulic outrigger support, radio remote control, 5x hydraulic extensions, green environmental badge. Wheelbase: 4200 mm. Superstructure: Hiab 245-E 5 Hiduo, radio-controlled, foldable, Schwarzmüller aluminum body, folding and swinging side boards, load-relieving springs. Loading height approx. 1,550 mm. Load diagram: 2.5 m – 8,300 kg, 7.8 m – 2,460 kg, 13.8 m – 1,280 kg. Reversing camera, left side and tailgate opening pneumatic, disc brake on front axle, drum brake on rear axle, Nordic cab insulation. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Djdpfx Asyhw Ibjd Nokl

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Mobile Concrete Batching Plant – SBM EUROMIX 1600 Manufacturer: SBM Mineral Processing GmbH Type: EUROMIX 1600 Type CM 128 L Year of Manufacture: 2021 Control System: GEDIS IBS33W Dksdoywi I Sepfx Ad Nol Mixer Capacity: 1,670 liters Production Capacity: approx. 60 m³/h Total Production: approx. 25,000 m³ Aggregate Bins: 4 compartments Heating System: 1 × hot air system for aggregates 1 × hot water system for fresh concrete production Admixture System: Container with 6 × 1,500 liter tanks 6 admixture pumps Cement Silos: 4 × 85 tons Condition: The plant is in very good condition and fully operational. Availability: Immediately available Location: Central Germany Price: On request Note: All prices are net ex works / ex location. Subject to prior sale, errors and/or misrepresentations. Sold without warranty or guarantee, as seen and inspected. Any reproduction, reuse, publication or copying of this offer in whole or in part is strictly prohibited.

Condition: used, Year of construction: 2020, operating hours: 4,725 h, functionality: fully functional, working width: 1,600 mm, sheet thickness (max.): 100 mm, The 42 RB series is the RB machine, offering versatility for deburring, edge rounding, finishing, laser oxide removal and slag removal of different materials. This 42 Series 1600 WRb is equiped with a 300 mm magnetic track, including a wet dust extraction system from Ulmatec with ATEX certification. The machine has undergone a full service and has been fitted with a new conveyor belt. Dkjdsyudbmopfx Ad Nol

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 7,500 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, total height: 1,635 mm, total width: 1,690 mm, overall weight: 2,600 kg, controller manufacturer: FANUC, product length (max.): 1,850 mm, number of axes: 3, This 3-axis DN SOLUTIONS Leo 1600 turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 320 mm and a turning length of 303 mm. The machine is equipped with a 6-inch main spindle chuck and offers a rapid traverse speed of 30 m/min in both X and Z axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS Leo 1600 machine we have for sale. Contact us for further details. • Main spindle chuck size: 6 inch (153 mm) • Bar capacity: 45 mm • Rapid traverse X: 30 m/min • Rapid traverse Z: 30 m/min • Main spindle torque: 72 Nm • Max turning diameter: 320 mm • Max turning length: 303 mm • Number of tool stations: 12 • Guideway type: Linear guideways • Monitor size: 10.4 inch • Electrical connection: 380 V • Electrical supply: 3 phase • Frequency: 50 / 60 Hz • Rated power: 14.97 kVA • Full load current: 22.74 A • Short circuit capacity: 10 kA • Interrupting capacity: 5 kA Additional equipment Dkjdpfx Asyu R Nwed Nsl • Optional: • 8 pcs. External clamping piece • 1 pc. Face turning tool post 850418 (500-5804) • 3 pcs. Internal turning tool post • Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, basic tool post included Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Djdpfx Adoyvfvue Njkl Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control High reliability and low maintenance Control: FANUC CNC

Condition: used, We offer for sale a used Ghelco VALJET 1600 digital inkjet printer. This printer is designed for printing on flat surfaces such as glass, metal, wood, and plastic. Maximum print width is 1.6 m. Maximum print resolution is 1440 dpi. Dodpfx Adsywlaqj Nokl If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, mileage: 298,000 km, power: 257 kW (349.42 HP), first registration: 10/2006, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: orange, loading space length: 4,300 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2006, Equipment: ABS, crane, Man TGA 18.360 / 4x4 TIPPER 4,30 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN GOOD CONDITION! KEIN GETRIEBE !! ? YEAR OF PRODUCTION: 2006 ? MILAGE: 298 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? POWER STEERING ? Immobiliser ? TACHOGRAPH TIPPER: 430 x 245 x 60 cm (L x W x H) CAPACITY: 11 000 kg TOTAL WEIGHT: 18 000kg WHEELBASE: 495 cm TIRE SIZE: Dsdpfx Asyw Enhod Nokl FRONT : 385/65R22,5 BACK : 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: ATLAS TEREX 120.2 E A3 + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 5761

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Dodpfxoywh Epe Ad Nekl Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Dedpfx Adsvgmr Ij Nskl Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm Dksdpjvut Uxsfx Ad Njl table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Dsdpfx Adjv Nzpge Nskl Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: good (used), Year of construction: 2011, functionality: fully functional, - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. Dedetmrkrjpfx Ad Nokl -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry Djdpfx Adex D E Dys Nokl • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 814 mm, controller manufacturer: HAAS, number of axes: 4, This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. • Table with integrated rotary table 4th axis • Table dimensions: length 1626 mm x width 814 mm • Rotary table diameter: 762 mm • Tool changer: 30 +1 • renishaw probe included • Last geometry check by HAAS in 2023Machine still under power Additional equipment • Coolant tank with low and high pressure pumps Dodjx D Eppopfx Ad Njkl • 2 chip conveyors with screwrenishaw probe included Last geometry check by HAAS in 2023 Technical Specification Taper Size SK 50

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc Dksdpfxsx D Nxzs Ad Nel • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: excellent (used), Year of construction: 2020, For sale is a used Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. The machine is in good condition. Technical specifications: - Center height: 200 mm - Max. turning diameter: 395 mm (700 mm with optional outboard turning attachment) - Center distance: approx. 715 mm (optionally extendable) Dksdpfx Adoyucw Tj Nsl - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (trapezoidal thread), prepared for ER-25 drill quill - Motor: 2 HP (230 V connection) - 2-stage brake switch - Weight, floor-standing version: 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Sale subject to prior sale! Related terms: woodturning lathe, lathe, turning machine, wood lathe, turning, turning tools, woodturning, machining, machine Reference: B18OO

Condition: good (used), Year of construction: 2020, For sale is a used Drechselmeister Twister FU 180 wood lathe with a center distance of 560 mm. The machine is in good condition. Technical Data - Center height: 180 mm - Swing over bed: 358 mm (with optional outboard turning device even more – depending on the workpiece!) - Distance between centers: approx. 560 mm (expandable!) - Spindle mount: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt stages): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal threaded spindle - Motor: 1.5 HP (230 V) - Overall width: 1,345 mm - Weight, stand version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Dkodoyucuxjpfx Ad Njl Related keywords: wood turning machine, lathe, wood lathe, turning bench, wood turning, turning tools, wood turning, machine Reference: B18OO 1572

Condition: used, mileage: 635,000 km, power: 324 kW (440.52 HP), first registration: 07/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, loading space length: 7,450 mm, loading space width: 2,470 mm, loading space height: 600 mm, Year of construction: 2008, Equipment: ABS, air conditioning, crane, Volvo FM 440 / 6x2 Platform 7,45 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? MILAGE: 635 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION TIPPER: 745 x 247 x 60 cm (L x W x H) CAPACITY: 12 000 kg TOTAL WEIGHT: 26 000kg TIRE SIZE: 13R22,5 WHEELBASE: 575/135 cm SUSPENSION: AIR Dkjdpoyu Hk Djfx Ad Nel CRANE: HIAB 288 E - 8 HIPRO + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 70247

Condition: used, Year of construction: 2019, operating hours: 6,285 h, mileage: 6,285 km, power: 55 kW (74.78 HP), first registration: 07/2019, overall weight: 3,500 kg, fuel type: diesel, color: orange, maximum load weight: 1,550 kg, empty load weight: 1,950 kg, next inspection (TÜV): 07/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: other, emission class: euro6, suspension: other, total length: 4,016 mm, construction height: 1,970 mm, Equipment: air conditioning, all wheel drive, soot filter, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Dodpfx Adsyrih To Njkl Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 vehicles from Deutsche Post. Other services: - Various loading options - Registration service - Delivery available throughout Germany for an additional charge Inspections possible without appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-Mail: Further information available at We speak German / English / Russian / Italian / French / Spanish More Information Sales to businesses only (agriculture, freelancers, small or large enterprises) or export. Subject to errors and prior sale. CoC available.

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm Djdpfxjym D E Aj Ad Nokl stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: used, mileage: 4,861 km, power: 44 kW (59.82 HP), first registration: 07/2010, fuel type: diesel, color: green, gearing type: mechanical, suspension: other, number of seats: 1, operating hours: 4,861 h, Equipment: all wheel drive, , diesel all-wheel drive 44 kW Year of construction approx. 2010 4,861 operating hours 1 seat Mower front and side attachment Large area mower Mowing width approx. 3.00 m FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, DEPOSIT OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Dkjdpovidgujfx Ad Nel

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 Dsdpjr Iil Ejfx Ad Njkl VLA-25, VL-extension with corner correction rollers, 1999 DOS-1/PU, mix and metering station for PU, including nozzle purching device,1999

Condition: new, Year of construction: 2025, - Cutting Force : 1600 Tons - Capacity : up tp 70 tons per hour - Side Compression Force : 2 x 220 Tons - Clemp Compression Force : 250 Tons - Electric Motor : 480 kW - Machine Weight : 150.000 kg - PLC Controlled Dsdpogv Acujfx Ad Nokl - Remote Control Avaliable - Output Length Adjustable