Used Bonfiglioli C/A4 Scivolo 70 for sale (62,682)

Condition: used, Vötsch Climate testing chamber / temperature testing chamber Vötsch VCS³ 7034-5 climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 7.0 K/min Temperature change rate, cooling: approx. 8.0 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range, temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface Cable entry 50 mm Cable entry 125 mm Test specimen protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Visual condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 climate testing chamber Accessories as shown in the pictures Hnsdpfxoz Akcfo Akrju Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful check Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2017, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Hsdpfxoz Aty He Akrsnu Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 392 cm3 Injection pressure: 2000 bar Euromap 67 1x core puller Type: Horizontal Drive: Hydraulic

Condition: used, WE NEED SPACE: Direct from mold making: MACHINE LID MAHO DMC 70 V Control system Heidenhain TNC 426, manual control panel HR 410, Hedpfx Aszwdfvskrjnu X/Y/Z 700x550x500, spindle taper 40, 18000 rpm, tool changer with 30 positions, direct path measurement, internal coolant system 40 bar, enclosed cabin, chip conveyor, LTA emulsion mist extraction, year of manufacture 1999, only 14,400 spindle hours * Machine from the first owner, has only been used as a standby machine for some time, test runs and geometric measurements possible at any time. * Price ex works plus VAT, internal transport and loading included.

Condition: refurbished (used), machine/vehicle number: R-00700, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in {year_of_manufacture_robot}. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: {year_of_manufacture_robot} Hnodpfxjz E Iixj Akreu Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.10 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: used, Vötsch Temperature Test Chamber / Climate Test Chamber Vötsch VTS 7027-15 Temperature Test Chamber Temperature range from -70 °C to +180 °C Approx. 270 liters / Heating up to 15 K/min / Cooling down 15 K/min For sale is a used temperature test chamber from Vötsch Industrietechnik GmbH. The test chamber is suitable for rapid temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The unit features a programmable touch panel control, a large viewing window, a stainless steel test chamber, and side access ports for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VTS 7027-15 Device type: Temperature test chamber / Climate test chamber Test chamber volume: approx. 270 liters Temperature range: -72 °C to +180 °C Heating rate: approx. 18 K/min Cooling rate: approx. 18 K/min Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±2 K Heat compensation at -20 °C: approx. 8,000 W Heat compensation at +20 °C: approx. 8,000 W Refrigerant 1: R404A Refrigerant quantity: 6.5 kg Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 2.3 kg Max. high pressure: 25 bar g Standby pressure: 17 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 16 kW Rated current: 31 A Cooling: Water-cooled version Cooling water inlet and outlet available Dimensions and weight: Test chamber volume: approx. 270 liters Internal dimensions (W × D × H): approx. 580 × 620 × 750 mm External dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Weight according to model series documentation: approx. 835 kg Equipment: Hnedpfx Aoz A U N Tskrsu Programmable touch panel control S!MCON/32-NET control, monitoring, and regulation system Water-cooled refrigeration unit Interior made of stainless steel Large viewing window Test chamber lighting Side access ports for test specimens Stainless steel grid shelves Adjustable temperature limiter Main switch RS232 interface Power socket 220–240 V AC, max. 2 A Programmed operation and manual operation Application areas: Temperature testing Temperature cycling testing Environmental Stress Screening / ESS Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Scope of delivery: 1x Vötsch VTS 7027-15 Temperature Test Chamber Programmable touch panel Stainless steel inserts according to images Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, CTS Type: CS-70/900 CTS climate testing chamber with Feuchet water cooling (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98 % RH Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Hodeziiztspfx Akrenu Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, rated current: 35.7 A Climate testing chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Climate testing chamber / Shaker chamber CTS TV-70/530 Climate testing chamber Hodpfszd Uq Ajx Akrjnu Climate testing chamber for combined temperature and vibration testing A used climate testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH is for sale. The system was developed for combined climate and vibration tests and is suitable for environmental simulation, material testing, electronics testing, quality assurance, as well as development and endurance tests. Shaker/vibration exciter is not included in the offer! Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TV-70/530 Equipment type: Climate testing chamber / Shaker chamber Test chamber volume: approx. 530 liters Test chamber dimensions: approx. 850 x 730 x 860 mm (W x D x H) External dimensions: approx. 1450 x 2250 x 2000 mm (W x D x H) Weight: approx. 1,200 kg Temperature range: -70 °C to +180 °C Heating rate: approx. 5 K/min Cooling rate: approx. 5 K/min Refrigerant: R404A / R23 Rated power: 16 kW Rated current: 29.1 A Equipment Shaker chamber for combined tests Test chamber prepared for vibration applications Cascade refrigeration system Temperature testing Accessories as shown in the pictures Application areas Temperature testing Combined climate and vibration testing Environmental simulation Electronics testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x CTS TV-70/530 Climate testing chamber Scope of supply as shown in the pictures Shaker/vibration exciter is not included in the offer. Items, machines or other accessories shown in the pictures that are not explicitly described are not included in the scope of supply. (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), mileage: 343,842 km, power: 125 kW (169.95 HP), first registration: 01/2001, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,250 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, number of seats: 3, total length: 7,940 mm, total width: 2,550 mm, loading space length: 6,090 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Year of construction: 2001, Equipment: tail-lift, General information Number of doors: 2 Cab: single Registration number: BJ-TS-37 Technical information Number of cylinders: 4 Front axle: Steering Rear axle: Double wheels Weights Empty weight: 5.040 kg Carrying capacity: 3.460 kg GVW: 8.400 kg Max. towing weight: 10.500 kg Functional Tail lift: BAR CARGOLIFT, tail lift Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Hedpozg I T Nsfx Akrenu Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch, unused, original packaging -Type: RT 107 17-1566 -Temperature range: 70 to 150 °C Hsdpfxjlc Uh Ej Akronu -Quantity: 4 thermostats available -Price: per piece -Package dimensions: 280/130/H75 mm -Weight: 1.2 kg/pc.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 6,170 h, load capacity: 3,000 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,440 mm, power: 70 kW (95.17 HP), empty load weight: 6,900 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,200 mm, Telescopic handler, rigid frame Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Hnsdpfx Aez N N D Tokrsu Front tire condition: 0 - 20% Rear tire type: Pneumatic Rear tire condition: 0 - 20% Description: JCB 530-70 telescopic loader - - - Year of manufacture 2001 - - 7m reach - - 3 tons lifting capacity - - - 4-wheel steering - - 4-wheel drive - - 3 steering modes - - mechanical quick coupler - - - 4-cylinder Perkins diesel engine (95 hp) - - Tires are not in good condition - - Windshield has a crack - - - but otherwise in good condition - - including used pallet fork + used bucket (2.2 m wide) Bulk material bucket, double pallet fork, 3rd valve, heater, full cab.

Condition: used, Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Control Panel “Touch Panel” All control and operating commands can be initiated on the “Touch Panel” control panel by simply touching the function symbols. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measurement cables and testing equipment to be placed in the test chamber. Feedthroughs: 1 feedthrough, ∅ 125 mm, installed on the right 1 feedthrough, ∅ 50 mm, installed on the left Volume: 990 liters Test chamber dimensions: Test chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Data for temperature tests: Minimum temperature: -70 °C Maximum temperature: +180 °C Temperature deviation, temporal: ± 0.1 to ± 0.5 K Temperature homogeneity, spatial: ± 0.5 to ± 2 K Temperature change rate, heating: 4 K/min Temperature change rate, cooling: 2.5 K/min Max. heat compensation: 2750 W Data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temperature deviation, temporal: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, temporal: ± 1 to ± 3% RH Data for operation: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 29A, Nominal power: 19.8 kW Refrigerant: R-452A / R23 Weight: approx. 910 kg For your safety as a buyer, here is the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant Hjdpfozgbtpjx Akrsnu 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch VT 7100 Temperature Test Chamber -70°C to +180°C Features • Touch panel • Microprocessor-controlled monitoring and control system MINCON/32 • Extremely low noise level • Protection of test specimens through independent temperature measurement • Maintenance-friendly design • Door with window (including test chamber lighting) • Streamlined air flow Manufacturer: Weiss Vötsch Type: Temperature test chamber Model: VT 7100 Control system: MINCON / 32 Operating unit: Touch panel Hjdpfx Aeph Uzxjkrenu Test chamber volume: 990 l Temperature range: -70 °C to +180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.1 to ±0.5 K Temperature change rate (cooling): 2.2 K/min Temperature change rate (heating): 3 K/min Electrical connection: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 13.8 kW Rated current: 29 A Weight: 910 kg Dimensions of the test chamber: Width: 1100 mm Depth: 950 mm Height: 950 mm External dimensions: Width: 1390 mm Depth: 1855 mm Height: 1995 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: M-710iC/70 R-30iB, overall weight: 560 kg, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: Fanuc, controller model: R-30iB, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® – Refurbished industrial robot. Established in 2002. Reliability as standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: M-710iC/70 Controller: R-30iB General purpose: Multi-purpose Payload: 70 kg Reach: 2050 mm Robot mass: 560 kg Delivery time: To be agreed upon mutually IRS Robotics® refurbishment includes: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, and painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash). About: Our daily business is the reliable delivery of refurbished A-brand robots: ABB – KUKA – FANUC – YASKAWA. Established in 2002. We ship worldwide. Hnsdpfox Trk Ijx Akrju

Year of construction: 2006, operating hours: 109,000 h, condition: excellent (used), functionality: fully functional, Horizontal machining center with 6-fold pallet station Machine has run only in aluminum - new spindle in 2020 TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001 spindle speed: max. 18000 rpm control: SIEMENS 840D Shopmill clamping area: 500 x 500 mm table load: max. 800 kg workpiece diameter: max. 800mm workpiece height: max. 900mm tool holder: HSK 63 tool changer: 180 positions spindle power: max. 30 kW torque: 5.000 Nm Holding torque: 5.000 Nm rapid traverse/feed rate: 60 m/min Feed force in X/Y/Z: 10 kN EQUIPMENT - chip conveyor - Pallet station 6 pallets - Automatic tool measurement 3 D wireless probe M+H Hnjdpjmfrgnofx Akrsu - Coolant system with paper belt filter - IKZ system with belt filter, 40 bar 30 tool pockets in the magazine are defective.

Condition: good (used), Year of construction: 1998, punching force: 70 t, overall weight: 2,400 kg, total length: 2,100 mm, total width: 1,300 mm, total height: 1,900 mm, Profile shear with punching and notching station, shear capacity 70 tons = 450x15 mm, punching capacity 130 tons = Ø 28x20 mm, punching throat 500 mm, punching table 1150x530 mm with gauges, shear gauge with trigger pulse, 2 foot pedals, much tools; dimension 1300x2100x1800 mm, weight ca. 2400 kgs Hnsdpfx Akemig D Dorsu

Condition: ready for operation (used), Hydac OLF-5/4-S-370-N-N5AM002-C filter system SN: MK116904 with FCPA171B-4 / 6018870 motor, Hydac VM 2 C.0 pressure switch and FZP-1/3.1/P/71 cooler, used, minor signs of wear, 100% functional, scope of delivery as per photos Hnjdpeny Dngofx Akrju

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length Hnjdpfx Akou R R Avjrou 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm Hnjdpfx Akjidmptsrou spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Year of construction: 2000, condition: excellent (used), Weinig High-Mech A4 bundling system Bundle forming packaging unit possible to combine with other Weinig outfeed handling systems available from stock such as buffers and stackers. Consisting of 1. Weinig 815-300 high speed bundling unit 2. Weinig 812-200 outfeed roller conveyor with crossfeed 3. Control panel with Siemens S7-300 CPU Hnodpfx Aeq Rvrbokreu

Condition: used, Tapping chucks, thread chucks, tapping chucks, tapping attachments -with: slip clutch -Integrated reverse gear with: fast reverse -Thread sizes: M5-M18 -Recording: MK3 Hnodpfx Akedvkg Ajreu -Dimensions: 380/95 mm -Weight: 2.6 kg

Condition: good (used), Stick electrodes 3.2 x 350 Hjdsd Iuxqspfx Akronu -Type: Thyssen Ce I 70 -1 package: 650 pieces -Weight: 17.9 kg

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive Hnsdpfx Asdkqg Sskrju -Type: Microdrive-3 UDZ-70 -Power: 33-44 kW -Connection: 380-480 V -20/+5% 48-62 Hz -A: 70 A -Dimensions: 440/145/H685 mm -Weight: 35 kg

Condition: good (used), Bezel, setting stick, lynette -Max. passage: Ø 70 mm Hodpfx Ajb A Iuiokrsnu -Peak height: 250 mm -Weight: 10 kg

Condition: used, Year of construction: 1998, travel distance X-axis: 8,300 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, table load: 30,000 kg, spindle diameter: 220 mm, BRAND: COLGAR MODEL: FRAL 70 C16 CATEGORY: CNC BORING MACHINE YEAR: 1998 CNC CONTROL: ECS CNC2600 MACHINE DIMENSIONS Length: 14,000 mm Width: 9,000 mm Height: 6,500 mm Hedpfxex E U R Io Akronu SPINDLE HEAD Quill diameter for boring: 160 mm Spindle nose type: ISO-50 Milling spindle diameter: 220 mm Spindle speed range: 2 – 1,665 rpm Spindle motor power: 55 kW Overhauled bi-rotary automatic head A axis minimum angle: 2.5° C axis minimum angle: 1° Automatic head changer system High-pressure coolant through spindle line with pump WORKING CAPACITY X axis: 8,300 mm Y axis: 3,000 mm Z axis: 1,000 mm V axis: 2,000 mm W axis: 800 mm B axis rotation: 360° A axis bi-rotary head: 360° (minimum angle 2.5°) C axis bi-rotary head: 360° (minimum angle 1°) RAM dimensions: 645 x 500 mm ROTARY TABLE Table dimensions: 2,500 x 2,500 mm Maximum load: 30,000 kg Number of Stolle plates: 2 (each 4,000 x 2,000 mm) FEED RATES Rapid feed (axes X, Y, Z, V, W): 8,000 mm/min Working feed (axes X, Y, Z, V, W): 6,000 mm/min TOOL MAGAZINE Capacity: 60 tools Tool holder: DIN 69871-B50 ACCESSORIES Machine complete with accessories, Stolle plates, and rotary table

Condition: new, color: grey, Field of application: Mining Empty weight: 32.000 kg Dimensions (LxBxH): 2200 x 310 x 430 cm Tyre size on axle rear: 225 Tyre tread remainder on axle rear: 100% Hodsx D A H Espfx Akrsnu - Central lubrication - Originally painted - Tool box MOBILE SAND MAKER Feeding Hopper : 10 m3 Crusher Feeding Belt Conveyor 800*9000mm VSI700 Vertical Shaft Impact Crusher 132kw Vibrating Screen 2 Decks 1600x5000mm 11 kw Feedback conveyor 600*8000mm Stockpile Conveyors 600*8000mm Mobile Chassis 2 Axles-Compacible With EU Road Regulations Automation -PLC- with Tablet and PC Controlled Industrıal Paint on 1 Layer Linings-120-140 Micron- Barriers-Ladders-Platfroms Galvanised PLANT DETAIL Production Capacity 40-60 tph 0-5mm Maximum Feeding Size 50mm Feeding Height 3.8 meters Main Configuration VSI Crusher + Vibrating Screen Total Motor Power 165 kW Electric Generator Requirement 350 kVA Weight of the plant 31 Tonnes Sizes of the plant 14(L) x 3 (W) x 4.2(L) meters Chassis Type Single chassis on wheels Production Capacity 100-150 tph Maximum Feeding Size 50mm FEEDER PROPER FOR HEAVY DUTY Dimensions : 900x4100 mm Bunker : 15 m³ Capacity : 150 to 200 tons / hour Grid Length : 1160 mm Main Body Sheet : 20 mm. Weight : 5.5 tons. Number of springs : 111 ea Type of Bypass : Flat grid type (throttle transfer) Grill casting : 16-18 mn. 1,5 cr. Type of Bunker : With flat ramp climbing Anchorage slots : pin click - fit Bypass chute : With rear additional saddle 2-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane Crusher Feeding Belt conveyor Rated sizes : 800 x 9000 mm Motor power : 7 kw 1500 d/d Power Transmission : Motorized Reducer Drive drum : 273 Vulcanized Rubber Coating Tail drum : Angle process over pipe Body Construction : Sheet Metal Body Rubber Tension System : SNH type sliding bedding Carrier : triplet assembly pedestal Group of turning roll : single hanger system Type of reducer : İ-MAK reducer Band rubber : 5 layers...