Used Bystronic Bysprint Fiber 3015 for sale (1,276)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Hjdozcwupepfx Adzor Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: used, • Load capacity 150 kg • Year of manufacture 2013 • Maximum pane/frame size – 1500 x 2400 mm Hodpfx Adewcm U Hezsr • Machine no. – L-220.1743 • Price upon request

Condition: used, functionality: fully functional, Year of construction: 2011, laser type: CO₂ laser, laser power: 4,400 W, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, We offer this used Bystronic Bylaser 4400 laser cutting machine, manufactured in 2011. Model: Bylaser 4400 Year of manufacture: 2011 Laser medium: CO₂ Max. power cw: 4400 Hjdpfezbuaysx Adzer The machine is connected and can be put into operation for a demonstration. The filter system and cooler, including the piping, are offered with the machine. The machine and auxiliary units have been regularly serviced by Bystronic. If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Hsdpfxeyz Iu Ss Adzer Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 62 kW

Condition: new, Year of construction: 2025, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Hodpsv U A I Iefx Adzor Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 9500 mm Width: 4200 mm Height: 2600 mm Machine weight: 5300 kg Electrical connected load: 60 kW

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm Hodpfxjzcum Nj Adzor simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1000 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 36 kW

Condition: good (used), Year of construction: 2014, Lifting capacity: 500 kg Swivelling, horizontal/vertical 6 suction plates Height: 1250 mm Width: 1250 mm Hsdpezb E Iusfx Adzsr Depth: 1150 mm Net weight: 130 kg Condition: good, second-hand

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: SIEMENS, controller model: SIEMENS 840D, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 170 mm, feed rate X-axis: 80,000 m/min, feed rate Y-axis: 80,000 m/min, overall weight: 20,000 kg, total length: 12,000 mm, total width: 6,000 mm, total height: 6,500 mm, Laser cutter BYSTRONIC - ByLaser 4400 MACH-ID 9635 Make: BYSTRONIC Hsdpfxey U Htte Adzjr Type: ByLaser 4400 Control: SIEMENS 840D Year: 2010 BYSTRONIC BYTRANS Loading arms with change position BYSTRONIC BYTOWER Plate storrage  Change Table foir in and out feed manipulation Dust collector 5.0 inch cutting head 7.5 inch cutting head Under power insopections possible ! Working area X Axis: 3048mm Working area Y Axis: 1524mm Working area Z axis: 170mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4.4kW / Amp Feed rate X-Axis: 80000mm/min. Feed rate Y-Axis: 80000mm/min. Sheet master loading arm:Yes, BYTRANS Sheet tower storage: Tes, BYTOWER Dust collector: Yes Cutting hours: 26000H Length: 12000mm Width: 6000mm Height: 6500mm Weight: 20000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, HD-F Fiber Laser Cutting Systems Durma fiber laser cutting machines are characterized by faster cutting speeds and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain. With the highly efficient components used in Durma fiber laser cutting systems, you receive quality, performance, and efficiency simultaneously, which increases the value of your company. Thanks to highly precise Helis gears, very high acceleration values (28 m/s2), a high travel speed (170 m/min), and positioning tolerance values (0.05 mm) can be achieved. Durma fiber laser cutting systems are unique with their stable and modular machine body, excellent filter system, compact design, and efficient and user-friendly structure. X-axis: 6000 mm Y-axis: 3000 mm Z-axis: 125 mm Max. sheet size: 6048x2024 mm Max. sheet weight: 200 kg/m2 X-axis: 100 m/min. Hedsg Adu Hspfx Adzer Y-axis: 120 m/min. Synchronization: 156 m/min. Acceleration: 16 m/s2 Positioning accuracy: + 0.05 mm Reproducibility: +0.05 mm Cutting thickness Mild steel: 25 mm Stainless steel: 15 mm Aluminum: 20 mm Standard equipment Automatic pallet changer Sinumerik 840D control Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measurement system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust extraction Vanterm Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet layer detection, measurement The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 40 t, table length: 1,030 mm, Equipment: CE marking, documentation/manual, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Make: Bystronic Model: Xpert 40/1030 Tonnage 400 kn / 40ton Back gauge: 6axis back gauge Bending length 1030 mm / 1metre Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Hjdpfxsy D Smws Adzsr Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm Xpert 40/1030 ByVision Bending control with 22 Inch Full HD display and touch technology

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Hodsy Rnb Depfx Adzjr

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 35,509 h, machine/vehicle number: R1119022, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, controller model: P8005A, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 4400, laser hours: 35,509 h, laser power: 4,400 W, laser wavelength: 10 nm, Offered is a laser source from Bystronic (ByLaser 4400). All maintenance and repairs were performed by Bystronic. Operating hours may change as the machine including the laser source is in daily operation. Handover is by arrangement, dismantling is the buyer's responsibility. Parts can also be sold individually as spare part donors. Hedpfjy Rzg Tjx Adzer

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Hedpjxfrv Esfx Adzer Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, Year of construction: 2008, Folding press Bystronic in very good condition. Sold with many tools. Machine tools are connected, can be tested, inspected. Specification: Model: Bystronic PR 400 x 6200 Year: 2008 Hjdpjqzxgmsfx Adzer Bending length: 6200 mm Tonnage: 400 T Tools: available If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2011, functionality: fully functional, pressing force: 100 t, stroke length: 315 mm, overall weight: 8,000 kg, Hydraulic Press Brake Manufacturer: BYSTRONIC Model: Xpert 100/2050 Year of manufacture: 2011 Technical Data Make: BYSTRONIC Model: Xpert 100/2050 Year: 2011 Press Force: 100 t Bending Length: 2000 mm Stroke: max. 315 mm Motor Power: 7.5 kW Dimensions: approx. L 3.10 x W 1.90 (plus support arms) x H 2.85 m Weight: approx. 8 t Equipment: Hedpfx Ajy Ef Rxjdzer • Controlled axes: Y1, Y2, X, R, Z1, Z2 • PILZ Fast Bend light barrier • Controller: MMC BYBEND • Hydraulic tool clamping (top and bottom) • Hydraulic pressing table!!! • Movable support arms • CNC-controlled crowning • 1 upper tool, gooseneck, H 150mm, 80°, segmented • 1 lower tool V12 All information is supplied without liability. A demonstration in our showroom is possible at any time.

Condition: good (used), Year of construction: 2005, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, BYSTRONIC, RB-NTB-2.20x4.00-L-AL Autom. Frame Bending Machine Bystronic / Lenhardt Max. frame dimensions: 2200 x 4000 mm Profiles: aluminum and TGI (the machine is not built for TGI but it works ok.) Inkjet printer Domino A520i and bending tools included. Hedpfexyk R Rsx Adzor Connection: 3/N/PE-50 Hz, 400V, 6 kW | Year: 2005. In good technical condition. Available: NOW

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, controller manufacturer: Bystronic, controller model: Byvision, bending force (max.): 225 t, control type: CNC control, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, 1 Used High quality fully serviced Bystronic Xact Smart 225/4100 4metre x 225ton hydraulic downstroke cnc pressbrake for sale Xact Smart 225/4100 Make: Bystronic Model: Xact Smart 225/4100 Year / new: 2016 Total axis: 6 – 4axis back gauge X R Z1 Z2 Hydraulic crowning Free standing no pit required Hodpoyxqzvefx Adzjr Capacity / bed size / tonnage: 4metre x 4100mm x 225ton Cnc control: ByVision touch screen

Condition: excellent (used), functionality: fully functional, stroke length: 310 mm, controller manufacturer: Cybelec, controller model: DNC 1200, working width: 3,100 mm, bending force (max.): 100 t, distance between stands: 2,550 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 7, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, upper tooling, Bystronic 100 ton x 3100 mm PR6. 7 Axis X. R. Z1. Z2. X1 100 mm Extra Daylight & Stroke Hydraulic Crowning Hydraulic Upper Tool Clamping Hjdpfx Aoyxhhmjdzsr Full Upper & Lower Tooling Cybelec 1200 Colour Graphic Control

Condition: used, Year of construction: 2022, Excellent ByStar 4020 fiber laser with 15kW laser output and ByTrans Extented automation. Including nozzle changer, Mixgas and outdoor version of dust extraction. Hsdpfjy Erfvox Adzjr Viewing possible upon appointment. Working dimensions: 4000 x 2000 mm Laser output: 15000W Automation: ByTrans Extended Power on hours: 5734h Cutting hours: 1570h

Condition: good (used), Year of construction: 2010, Press brake with max. pressing force of 400 tonnes Hjdpfxsyh T Srj Adzjr max. working length 5100 mm max. stroke 365 mm 34 kW Total weight 38 tonnes

Year of construction: 2015, condition: ready for operation (used), A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible. Hodpfey D Trnjx Adzor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, No reserve price – guaranteed sale to the highest bidder! The machine was last overhauled in 2024! Hedpfxjy Nkzqo Adzor TECHNICAL SPECIFICATIONS Material loading area: 4,000 mm x 2,000 mm MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm EQUIPMENT Service and inspection history dating back to 2019

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Hedpfx Adjnyhvqjzjr Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Year of construction: 2007, condition: good (used), Used 4.4kw Bystronic Byspeed CNC laser for sale Used Bystronic 4.4kw lasers for sale VIDEO BELOW: Byspeed 3015 4.4kw Hsdpfx Adegwa Swezor Installed new/year: 2007 Manufacturer: Bystronic Model: Byspeed 3015 Sheet size: 3metre x 1.5metre / 3000mm x 1500mm Laser power: 4.4kw / 4400 watt Control: ByVision CNC02 Automation n/a Year: 2007 Condition: good working condition / service from new Byspeed 3015 4400w March 2010 Power on: 44,189 hrs Cut time: 20,490 hrs Good condition machine that has been covered from new by service contract with Bystronic UK. Options Included: Bypos automatic focus CutControl 2 cutting heads Tools and accessories Torit Dust collector Delivery, installation and tuition available at extra cost.

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hjdpfxogkgwfe Adzjr Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition