Used Carriage for sale (1,944)

Condition: used, mileage: 140,111 km, power: 210 kW (285.52 HP), first registration: 11/2017, fuel type: diesel, overall weight: 24,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2028, color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, all wheel drive, Liebherr LTM 1040-2.1 4x4 mobile crane – 40 tonnes – top condition German-made Liebherr LTM 1040-2.1 all-terrain mobile crane from 2017. Compact two-axle truck crane with 4x4 drive, all-wheel steering, and a ZF AS-Tronic transmission. This vehicle features extensive safety equipment, air conditioning, auxiliary heating, and two hook blocks. Technical data: * Vehicle number: G400136 * Vehicle condition: Used * Category: Truck crane * Manufacturer: Liebherr * Model: LTM 1040-2.1 * Initial registration: 11/2017 * Year of manufacture: 2017 * Mileage: 140,111 km * Fuel type: Diesel * Engine displacement: 7,700 cm³ * Power: 210 kW (286 hp) at 2,200 rpm * Transmission: ZF AS-Tronic * Transmission type: Automated * Emission class: Euro 6 * Engine emission stage: Stage IV * Environmental badge: 4 (Green) * Axle configuration: 4x4 * Number of axles: 2 * Steering: Axles 1 and 2 steered * Permissible total weight: 24,000 kg * Vehicle weight: 24,000 kg * Color: Orange * Technical inspection: New * German vehicle Blsdpfx Aoy Hy Dpjqwsl Crane chassis: * Operating mileage: 140,111 km * Chassis operating hours: 4,349 hours * Data record: April 28, 2026 * Drive: 4x4 * All-wheel steering * Axles 1 and 2 steered * Tire size: 445/95 R25 * Liebherr diesel engine * Engine power: 210 kW at 2,200 rpm * ZF AS-Tronic transmission * ABS * Air conditioning * Auxiliary heating * Chassis cab available * Crane can be driven from the upper carriage Crane superstructure: * Crane superstructure operating hours: 7,754 hours * Data record: April 28, 2026 * Maximum lifting capacity of the model series: 40 tonnes * Hook block: 25 t * Load hook: 5.7 t * Counterweights: 0.75 + 0.75 + 1.8 t * Crane can be driven from the crane superstructure * Separate crane cab Comfort and additional equipment: * Air conditioning * Auxiliary heating * 12-V socket in both cabs * Two work spotlights on the slewing ring * Work spotlights electrically adjustable * Box for outrigger pads * All-wheel drive * All-wheel steering Inspection and functional testing possible after prior appointment. Further information, photos, load charts, and videos are available upon request. Subject to errors, changes, and prior sale.

Condition: used, mileage: 257,232 km, power: 120 kW (163.15 HP), first registration: 03/2013, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 09/2028, color: white, gearing type: mechanical, Year of construction: 2013, Equipment: air conditioning, Internal vehicle number: G300109 Available immediately at our yard in Kaufungen. More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 2013, registered as a self-propelled work machine, green registration - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer mounted under the frame - Reinforced shock absorbers - High roof and rear door - Auxiliary hot air heater - Rotating beacon, yellow, front left / rear right - Rear door, two-leaf, 270 degrees TV inspection system - RCA proline with Sat - Control unit RCA proline - Cable drum ELKA 600 with approx. 380 m of camera cable - Cable drum K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel gantry with winch for lowering camera/carriage - 1 carriage L 135 for main sewers DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional halogen lighting, inclination measurement and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank - Power supply via gel batteries Financing example: * Internal number: G300109 * Purchase price: € 39,500.00 * Down payment: 10% * Term: 60 * Monthly rate: € 624.93 Residual value: € 7,980.00 If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH Bljdszpcx Sspfx Aqwol We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 178,613 km, power: 118 kW (160.44 HP), first registration: 06/2010, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 09/2028, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, Internal vehicle number: G170470 Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) The auxiliary battery needs to be replaced. Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 06/2010, registered as a self-propelled working machine, green license plate - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer under the frame - Reinforced shock absorbers Bjdezpcx Ejpfx Aqwell - Roof and rear door, tall version - Auxiliary hot air heater - Rotating beacon, yellow, front left/rear right - Rear door, two-wing, 270 degrees - Mileage: approx. 178,613 km TV inspection system - RCA proline with satellite - Control unit RCA proline - Cable drum ELKA 600 with approx. 380 m of camera cable - Cable drum K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel jib with winch for lowering the camera/carriage - 1 carriage L 135 for main pipes DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional lighting, halogen, inclination measurement, and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank - Power supply via gel batteries Financing example: * Internal number: G170470 * Purchase price: 29,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 1992, operating hours: 4,296 h, lifting height: 3,910 mm, fuel type: diesel, mast type: duplex, fork length: 1,170 mm, fork width: 1,700 mm, total height: 3,910 mm, total length: 3,630 mm, total width: 1,740 mm, color: yellow, Empty weight: 7.700 kg Lifting capacity: 5.000 kg - Year: 1992 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 74611023X8 - Operating hours: 4296 - Lifting capacity: 5000kg - Lifting height: 3910mm - Overhead clearance: 2760mm - Fork length: 1170mm - Maximum fork width: 1700mm - Minimum fork width: 330mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Work lights, Joystick, Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Yale - Transport dimensions: 3630mm x 1740mm x 3910mm (l x w x h) - Transport weight [kg]: 7700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bsdpozgcyqefx Aqwsll Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available - Blsdpfx Aqjzp Nt Ajwel

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Bjdpfx Aqjxy Tmnswell

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. Bsdjyyap Espfx Aqwjll • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: used, Year of construction: 2006, Motor-adjustable parallel guide; length stop with display; single-sided motorized tilting; sliding carriage, 3000 mm; 5.5 kW; scoring cutter; cutting width 1000 mm. Bedpfx Aqezx Tmfjwsll Location: Nattheim.

Year of construction: 2025, condition: excellent (used), Max Carriage length : 6000 mm Chain guide bar : 1900 mm 6 support rollers Blodpfozwx N Nox Aqwel Max package measures : 6000 x 1200 x 1200 mm Cutting accuracy : +/- 2 mm Main engine : 11 Kw Saw blade : STIHL 3428 Traveling speed : 10m/min PLC with SIEMENS KP400 comfort panel with DEMAG position drive With HOLTEC Waste conveyer : L 7500 x W 1600 x H 3500 mm HOLTEC ES 121 SHK Total Measures : L 14500 x W 3400 x H 3700 mm Still connected to power, can be examined in working condition Very few hours, like new all over

Condition: good (used), functionality: fully functional, Subject to differential taxation according to §25a of the German VAT Act. You will receive a regular invoice. Internal article number: 26057 Lathe Weiler Matador Blsdpfx Aqezx R R Iewjl + Multifix "A" baseplate + 3-jaw chuck + Collets + Coolant pump Center height approx. 150mm Turning diameter over carriage 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 rpm Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left Bledpfx Aqezl A Raswjl - Sliding carriage

Condition: used, Year of construction: 1999, Format: 340 mm Equipment: Bljdpfxezcp D Ns Aqwel VIVA 340 No. 85, equipped with: 1 paper unwinder (1 m diameter) 1 rotary die-cutting unit with magnetic cylinder, 14 Zoll format length 6 letterpress units with integrated register carriage and magnetic cylinder (14 Zoll format length) 1 Grated exhaust system (600 mm diameter) 1 Winding system (700 mm diameter) 1 Longitudinal cutting/trimming unit 1 UV flexo coating unit with magnetic plate cylinder 7 I.S.T. UV dryers with CMK reflectors and provision for water cooling 1 Rotometrics Hydrajack pressure control system for the main die-cutting unit 1 BST ProMark video web inspection system (model Euroscope) 1 Preparations for COVID-19 treatment 1 Plate punching machine 1 Plate bending machine

Condition: excellent (used), Catalog number: 8057 TECHNICAL DATA - max. blade diameter: 400mm - blade arbor diameter: 30mm - max. cutting height: 120mm - spindle lock - main blade adjustable up/down and at an angle - blade guard - with side carriage - cutting length on carriage: 1000mm - cutting width with guide: 1050mm - main motor: 3kW - with extension Blodpfjzx Sg Rjx Aqwel - dimensions of the table with extension: 1050x1730mm - 3 types of rotational speeds - dimensions (L/W/H): 2700x1750x1000mm - weight: 860kg ADVANTAGES – Made in Germany – Blade guard – Large blade: 400mm – Used saw, very good condition Net price: 7900 PLN Net price: 1881 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: like new (used), functionality: fully functional, CIRCULAR SAW model CASOLIN ASTRA 400 . carriage mm. 3800 second hand machine in excellent working condiiton CE-compliant machine: YES electric blade lifting electric blade tilt with scoring blade: YES scoring blade with electric movements from control panel independent motors volts 380/50 digital blade tilt display digital blade height display technical details : anodized aluminum carriage: mm.3800 cutting width on the rip fence: mm.1300 maximum panel passage to the right of the blade mm. 2000 max. blade diameter: mm.400 (with scoring blade installed) blade unit tiltable at 45° scoring unit with independent motor: YES blade rotation speed: rpm 3200 / 4200 / 5000 saw blade unit: motor power Hp 7,5 Bodpfx Aqozygcpswoll scoring unit: motor power Hp 1 machine equipment : aluminum telescopic rod n.2 mechanical stops suspended "bridge" protection on the blade n.2 additional frames (rear and side)

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 184 h, load capacity: 1,500 kg, lifting height: 4,300 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 2,700 kg, drive type: Diesel, construction width: 1,490 mm, Telescopic forklift rigid Load center of gravity: 500 Technical condition: New Front tires type: pneumatic Front tires size: 10.0/75-15.3 Bjdpfx Aqjmky N Aewoll Rear tires type: pneumatic Rear tires size: 10.0/75-15.3 Quick coupler, 3rd valve, rear work lights, front work lights, heating, full cabin, CE certificate, Images may serve as symbolic representations of fork carriage with forks

Year of construction: 2023, condition: used, Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible. Bledpfxezxhlvo Aqwjl

Condition: used, Year of construction: 2002, CASCADE 100D-FPS-C61X (2002) Reliable forklift attachment from CASCADE, manufactured in 2002. Inspected by our own workshop and ready for immediate use. Why choose this unit? FEM 3 suspension – fits directly onto the corresponding fork carriage. Opening range: 560-2100 mm Fork dimensions: 1050x150x50 Own weight: 774 kg Chassis number: SEL58564-A-251314-3 Delivered after a complete inspection. Bsdpfx Aozwvh Neqwoll Available for immediate delivery from 2Bro Trading in Mol. Delivery throughout the Benelux region is possible. Delivered with a new inspection certificate – complete pre-delivery service.

Condition: used, Year of construction: 2018, Cascade 70-CFR-222 (2018) Robust rotator from Cascade, manufactured in 2018. Inspected by our own workshop and ready for immediate use. Why this unit? Bledpozwvh Aefx Aqwel FEM 3 suspension – fits directly onto the corresponding fork carriage Opening range 560-1800 mm Fork dimensions 1150 x 150 x 60 mm Own weight 1019 kg Chassis number VER1114640-2 Supplied after a complete inspection Available for immediate delivery from 2Bro Trading in Mol. Delivery throughout the Benelux region is possible. Supplied with a new inspection report – full pre-delivery service.

Condition: used, Year of construction: 2014, Cascade 70G-CFR Rotator (2014) Reliable rotator from Cascade, manufactured in 2014. Inspected by our own workshop and ready for immediate use. Why choose this unit? FEM 3 mounting — fits directly onto the corresponding fork carriage Opening range: 560-1800 mm Fork dimensions: 1200 x 150 x 60 mm Own weight: 1084 kg Bjdpfszwvhvex Aqwell Chassis number: VER927113-1 Supplied after a complete inspection Available for immediate delivery from 2Bro Trading in Mol. Delivery throughout the Benelux region is possible. Supplied with a new inspection certificate – complete pre-delivery service.

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: Bedpfx Ajtr U Hljqwell → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Year of construction: 2019, operating hours: 15,000 h, lifting height: 7,000 mm, fuel type: diesel, mast type: duplex, total height: 4,100 mm, total length: 3,400 mm, total width: 2,230 mm, color: red, Empty weight: 13.050 kg Lifting capacity: 8.000 kg - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X396V01495 - Operating hours: 15000 - Lifting capacity: 8000kg - Lifting height: 7000mm - Overhead clearance: 4300mm - Free lift: 0mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage Bjdpfx Aezwuvxjqwoll - Options: Heating, Joystick, Work lights, Full cabin - Mast: Duplex - Inspection valid until: 04-2027 - Drive: Diesel - Motor brand: Deutz - Transport dimensions: 3400mm x 2232mm x 4100mm (l x w x h) - Transport weight [kg]: 13050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2017, operating hours: 7,098 h, lifting height: 6,190 mm, free lift: 2,030 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, fork width: 1,040 mm, total height: 2,770 mm, total length: 2,300 mm, total width: 1,290 mm, color: orange, Empty weight: 4.792 kg Lifting capacity: 2.500 kg - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516345H00091 - Operating hours: 7098 - Lifting capacity: 2500kg - Lifting height: 6190mm - Overhead clearance: 2775mm - Free lift: 2030mm - Fork length: 1150mm - Maximum fork width: 1040mm - Minimum fork width: 240mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Joystick, Non-marking tires, Work lights, Half cabin, Free-lift - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: Still/ 80V PzS 560 STILL, A - └ Battery year of construction: 2017 - └ Capacity: 560Ah - └ Battery voltage: 80V - └ Tray length [mm]: 1025 Bljdpfx Ajzwulgeqwel - └ Tray width [mm]: 710 - └ Tray height [mm]: 785 - Transport dimensions: 2300mm x 1290mm x 2775mm (l x w x h) - Transport weight [kg]: 4792kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Blsdpfx Ajw Dfnhsqwsl Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 367 h, functionality: fully functional, turning length: 2,845 mm, turning diameter: 1,150 mm, total height: 1,890 mm, total length: 6,740 mm, total width: 2,205 mm, workpiece weight (max.): 5,000 kg, overall weight: 9,170 kg, Equipment: documentation/manual, Hankook Protec 9NC 3000 Flat Bed CNC Lathe — 2014 Blsdpfx Ajzvgayjqwol Year: 2014 Machine: Hankook Protec 9NC 3000 Type: Flat Bed CNC Lathe Running Hours: 367 hours Available for sale is a 2014 Hankook Protec 9NC 3000 Flat Bed CNC Lathe, showing just 367 hours. The machine is supplied with all three steady rests, making this a very well-equipped machine and an excellent opportunity for anyone looking for a heavy-duty CNC turning centre with very low hours. Key Features Hankook Protec 9NC 3000 2014 model Only 367 hours ! Flat bed CNC lathe 3 x steady rests included 3 Jaw and 4 Jaw Chucks Heavy-duty construction Suitable for a wide range of turning applications Low-hour machine Safety platform included Turning diameter over bed: Ø1150 mm Turning diameter over carriage: Ø830 mm Maximum turning length: 2845 mm Spindle bore: Ø105 mm Maximum turning weight: 5000 kg A very clean, low-hour example of a Hankook Protec 9NC 3000, complete with all three steady rests. Contact us for further information, photographs, specifications or to arrange an inspection.

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Bodpfx Ast Tqy Ejqwoll Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...