Used Cea Bsw 50 for sale (33,892)

Condition: like new (used), Horizontal carbon steel tanks 73.000l Nodpfoibh S Hex Ac Tecu Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder.

Condition: used, functionality: fully functional, BREVETTI CEA CARTRIDGE INSPECTION MACHINE, MODEL K32-400 Automatic inspection machine for the presence of bubbles, cap defects, stopper defects or wrong position in cartridges. With three inspection units for checking for particles. Ncedoxzupgopfx Ac Tsu CHARACTERISTICS Height of infeed/outfeed: 900 +/- 25 mm AVAILABLE FORMAT PARTS - For containers: with a diameter of 8 to 52 mm and a height of up to 150 mm - For cartridges: Ø 8.65x63 mm and Ø 8.65x76 mm PRODUCTION -Output: up to 400 cartridges/min ENERGY CONSUMPTION - Electricity: 400V, 50/60Hz, 3Ph - Power: 8 kW - Compressed air: 5 bar DIMENSIONS - Size: 2400 x 2600 x 2440 mm (approx) - Net weight: 2800 kg (approx)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. Njdpozcuyisfx Ac Tjcu EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,877 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Njdpezcla Hefx Ac Tscu Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, power: 52 kW (70.70 HP), screw conveyor diameter: 49 mm, machine/vehicle number: DE27566, TECHNICAL DETAILS Ncjdpfx Aszd Scpsc Tju Capacity: 150 – 250 kg/h Screw diameter: 2 x Ø 49.7 mm L/D ratio: 32D MACHINE DETAILS Motor power: 52 kW (DC) Control system: analog, contactor-controlled system EQUIPMENT Synchronous motor Degassing Vacuum pump

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain TNC 426 C, No minimum price – guaranteed sale to the highest bidder! Loading can be carried out by the seller for €750! TECHNICAL DETAILS Travel in X-axis: 4,000 mm Travel in Y-axis: 1,200 mm Travel in Z-axis: 2,000 mm Spindle type: ISO 50 Spindle power: 50 kW Spindle speed: up to 3,000 rpm Table length: 5,000 mm Tool changer: 30-position ATC MACHINE DETAILS Control system: Heidenhain TNC 426 C Headstock Swiveling: Automatic Increment: 1 degree / 2.5 degrees / stepless Dimensions & Weight Dimensions (L x W x H): 9,000 mm x 5,000 mm x 5,000 mm Weight: 35,000 kg EQUIPMENT Hydrostatic guideways in all axes Tool holders Coolant preparation/filtration system Chip conveyor Cooling system, manufacturer: Deerosdassi Control cabinet system Nsdpfozdtxfox Ac Tscu Note: The machine has already been professionally disassembled and is in storage.

Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Nedpex Ddc Iefx Ac Tocu Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Safety Guarding, Light Curtains, Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Repairs necessary: Pumps C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55

Condition: used, mileage: 52,877 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2021, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2021, Equipment: air conditioning, airbag, central locking, cruise control, immobilizer system, onboard computer, power assisted steering, trailer coupling, = Additional Options and Accessories = - Android Auto - Apple CarPlay - Armrest - Passenger airbag - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Wood cargo bed - Wood trim - Height-adjustable driver's seat - Height-adjustable steering wheel - Multifunctional steering wheel - Radio - Side bars - Start/Stop system - Immobilizer - Tachograph - Phone with Bluetooth - Twin tires = Additional Information = General Information Number of doors: 5 Model year: 2026 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 1,968 cc Transmission: 8 gears, automatic Dimensions Length/Height: L3H3 Dimensions (L x W x H): 615 x 207 x 312 cm Weights Unladen weight: 2,344 kg Payload: 2,656 kg GVWR: 5,000 kg Interior Interior color: black Maintenance, History and Condition APK (Technical Inspection): valid until 01.2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL Ncsdpfozg Uduex Ac Teu

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Njdpfx Aex Axbcjc Tjcu

Condition: like new (used), Nilma salad spinner in as new condition. 5-8 kg per cycle with a 1-2 minute cycle time Nodpfxoy Hqanj Ac Tscu

Condition: used, Year of construction: 1996, Manufacturer : Marchesini Model: MS 235 / AS 237 / BA 50 Year : 1996 Type : 4-seal pouch packaging line for powders. 1. Bagging machine Vertical automatic machine with intermittent movement for filling and sealing bags, for medium and high speed production lines, for powders. Nedpfx Aozg I Ugec Tocu Volumetric shaving filler Mechanical speed: 100 strokes/min Range of formats : max reel outer diameter: 400 mm (800 mm with reel) max reel width: 800 mm (820 mm with waste) bag length: 60 to 120 mm Reel support trolley Hopper handling trolley Weight: 2100 kg 2. sachet counting unit 3. Cartoning machine Capacity : 70 cartons / minute Dimension A = 40 - 145 mm Size B = 20 - 80 mm Size H = 70 - 190 mm A+B = 190 mm Weight: 900 kg

Condition: good (used), machine/vehicle number: 3039, Year of construction: 2001, load capacity: 35,000 kg, lifting height: 7,000 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 7,000 mm, total width: 3,680 mm, operation weight: 47,850 kg, additional equipment features: Dual tread, Weight system, Equipment: lighting, SveTruck 35120-50 from Uniktruck Wheel type – Drive wheel: Pneumatic Nedpfxjyuh E Ns Ac Tocu Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00-25 Wheel size – Steering wheel: 16.00-25

Condition: good (used), Year of construction: 2006, Mold heating, resistance heating device, transformer heating unit Nsdpfxjzg U S Eo Ac Tscu -Manufacturer: Sokol-Therm, resistance heater, portable -Type: 50 kVA 6 control circuits -Individual components: see photos -Dimensions 1000/770/H1510 mm -Weight 492 kg

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, Ncodpfx Acszg Ty Ue Tju rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: good (used), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical specifications of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5°C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Dimensions: Test space volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (see picture) Nodozg Txqepfx Ac Tjcu (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: good (used), LDS + Andreas Schmid Type: LDS Shaker V721 + TK 8000/-50/120 -55 to +140°C Shaker: Exciter: 4x LDS V721, air-cooled Amplifier: PA 1000L Controller: imv K2 MIMO (Multi Input Multi Output) Software: imv K2 Excitation types: Sine / Random / Shock / Real-time profiles Force vector per shaker: 2.9 kN (peak sine) / 1.9 kN (RMS random) / 4.6 kN (peak shock) Maximum payload: 100 kg per shaker Acceleration: max. 44 g RMS / 66 g peak Velocity: max. 0.7 m/s Displacement amplitude: max. 25.4 mm p-p (1 inch) Frequency range: 5...4000 Hz Mounting area for test specimens: 1000 x 1000 mm aluminum profile frame Special features: The four shakers can be operated synchronously or asynchronously with the MIMO controller. An aluminum profile frame enables a mounting area of 1x1 m² for large test specimens. Without the profile frame, it can be used as a mobile modal shaker for large test specimens, such as complete vehicles. The lightweight vibrating elements of the shakers enable excitation frequencies up to 4000 Hz. Weight: 2000 kg Climate chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8.000/-50/120 / Monoblock, welded Dimensions (mm): Width Depth Height Test chamber: 2,000 2,000 2,000 (8 m³) External dimensions without base frame: 2,340 3,600 2,800 External dimensions with base frame: 2,340 3,600 3,800 External dimensions of unit: 1,200 2,400 2,200 Nsdpjzg Tv Nsfx Ac Tecu Door: 2,000 2,000 2 test chamber windows in the door: 460 460 Weight: 4,500 kg Insulation: 140 mm PU, CFC-free, B1 according to DIN 4102 Outer cladding: Steel sheet 0.6 mm, painted according to RAK 7035 Temperature range: -55 °C to +140 °C Temperature stability: ± 0.5 K over time Climate range: +10 °C to +95 °C Humidity range: 10% to 95% RH Refrigerant R404A 29 kg Total weight: 6500 kg Condition: used Scope of supply: (See picture) Example pictures! Current pictures will follow! (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, axle configuration: 3 axles, first registration: 01/2010, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2010, Axle configuration Tyre size: 385/65 R22.5 Axle make: Mercedes-Benz Brakes: disc brakes Suspension: air suspension Rear axle 1: alloy rims; tyre tread left: 5 mm; tyre tread right: 3 mm Rear axle 2: alloy rims; tyre tread left: 5 mm; tyre tread right: 5 mm Rear axle 3: alloy rims; tyre tread left: 2 mm; tyre tread right: 4 mm Weights Unladen weight: 6,370 kg Payload: 32,630 kg Gross vehicle weight: 39,000 kg Nsdezgmkyspfx Ac Tecu Condition Damage: none

Condition: used, Year of construction: 2013, x-travel 500 mm y-travel 450 mm Nedpjzhchqefx Ac Tscu z-travel 400 mm total power requirement --- kW weight of the machine ca. 4,5 t dimensions of the machine ca. --- m

Condition: good (used), Year of construction: 2018, operating hours: 9,500 h, lifting height: 4,370 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, power: 25 kW (33.99 HP), motor manufacturer: Linde, battery capacity: 850 Ah, fork length: 2,400 mm, Weights Empty weight: 8.700 kg Battery Battery: 850 Ah, Year of manufacture 2020 Functional Lifting capacity: 5.000 kg Maximum passing height: 230 cm Number of valves: 3 Supply voltage: 80 V CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fork type: Vorkenversteller Fork carriage: Positioner and spread Latest inspection: 2026-03-03 Charger make: Linde Charger current: 850 Ncjdpjzgribefx Ac Tou Production country: NL Additional information Please contact Martyn Joosse for more information = Additional options and accessories = - 3rd valve - 4th valve - Battery charger - Roof window - Super elastic tyres

Condition: good (used), machine/vehicle number: 3513, Year of construction: 2009, load capacity: 32,000 kg, lifting height: 5,500 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 6,900 mm, total width: 3,700 mm, operation weight: 46,000 kg, additional equipment features: Centralized greasing system, Engine heater, SveTruck 32120-50 from Uniktruck Wheel type – Drive wheel: Pneumatic Nodpfsyuil Rjx Ac Tscu Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00x25 Wheel size – Steering wheel: 16.00x25

Condition: good (used), machine/vehicle number: 2715, Year of construction: 2002, SISU FC 50 AL from Uniktruck Ncedpfsyuhtgsx Ac Tju

Condition: good (used), machine/vehicle number: 1756, Year of construction: 2008, load capacity: 32,000 kg, lifting height: 4,520 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 7,100 mm, total width: 3,700 mm, operation weight: 39,900 kg, additional equipment features: Centralized greasing system, Equipment: lighting, SveTruck 32120-50 from Uniktruck Wheel type – Drive wheel: Pneumatic Ncsdpfeyuhhqsx Ac Tsu Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00x25 Wheel size – Steering wheel: 16.00x25

Condition: good (used), mileage: 801,813 km, power: 266 kW (361.66 HP), first registration: 01/2015, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,000 mm, total width: 2,600 mm, total height: 3,650 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, soot filter, spoiler, tail-lift, Technical information Number of cylinders: 5 Engine capacity: 9.291 cc Transmission Transmission: Scania, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: Scania Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 11.285 kg Carrying capacity: 7.715 kg GVW: 19.000 kg Functional Nedpfxszgryae Ac Tocu Tail lift: Dhollandia DHSV.20, slider lift, 2000 kg Interior Interior: grey History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Speed limiter - Spoilers - Stability control - Visor

Condition: good (used), mileage: 715,346 km, power: 266 kW (361.66 HP), first registration: 11/2015, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,950 mm, total width: 2,600 mm, total height: 3,650 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,910 mm, loading space width: 2,490 mm, loading space height: 2,190 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, power mirror, soot filter, spoiler, tail-lift, trailer coupling, Technical information Number of cylinders: 5 Engine capacity: 9.291 cc Transmission Transmission: Scania, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: Scania Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 11.080 kg Carrying capacity: 7.920 kg GVW: 19.000 kg Functional Tail lift: Dhollandia DHSV.20, slider lift, 2000 kg Make of bodywork: Brinks Carrosserie Frigoblock FK 13 SL Cooling engine: electric (11602 operating hours) Wall thickness: 50 mm Interior Interior: grey Maintenance APK (MOT): tested until 11/2026 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 3 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL Nsdpozgrx Nsfx Ac Tscu = Additional options and accessories = - 12 volt socket - Armrest - Car kit - Coupling - Heavy duty engine brake - Low-noise - Particulate filter - Radio/CD player - Speed limiter - Spoilers - Stability control - Visor

Condition: ready for operation (used), Year of construction: 2001, Available immediately from our location: 5-axis machining center Deckel Maho Type DMU 50 M Year of manufacture 2001 Control system Heidenhain TNC 124 5 axes (3 plus 2) Manual rotary axes with B and C tilting rotary table Axes B and C are displayed in the control system Table 700 x 500 mm Travel ranges X/Y/Z 500 / 400 / 400 mm Table load 200 kg Spindle SK 40 Spindle speeds 20 – 4500 rpm Drive power 9 / 13 kW Rotation range C 360 degrees Tilting range plus 95 / minus 10 degrees Feed rate up to 5000 mm/min Ncsdszg Tl Dspfx Ac Tju Spindle speeds 20 – 4500 rpm Weight 3 tons Coolant system Price: Euro 6,500.— plus VAT, ex location.