Used Circular Saw Hamech Tks 400, 5.5 Kw, 380V for sale (49,353)

Condition: used, Year of construction: 1987, Sawblade tiltable 45 ° Length of the rolling table 3200 mm cutting width 1000 mm Gkedjvyuqrepfx Afusc Motor output 5,5 kW weight of the machine ca. 1000 kg

Condition: used, functionality: fully functional, machine/vehicle number: 40711, Single jersey circular knitting machine, Mayer & Cie. model MV 1, machine number 40711. Made in Germany. Gkedpfxszvn S Ro Afuec NAMEPLATE DATA · Nominal diameter: 914 mm / 36 inch · Gauge: 28 E · Pitch: 0.91 mm · Number of needles: 3168 · Manufacturer: Mayer & Cie., Emil-Mayer-Straße 10, D-72461 Albstadt, Germany · No CE marking 36" DIAMETER WITH GAUGE 28. With 3168 needles, this machine has the highest needle count in the lot. A 36-inch diameter combined with a fine 28 E gauge is designed for wide-width production: mattress ticking, home textiles, shirting, and lightweight outerwear. EQUIPMENT FITTED · Phototex FM8 electronic fault scanner (ITE), CE marked · Senso+ lubricator by EQ Systeme, 5-liter tank · Air filter-regulator · Control panel with start and stop push-button station · Hengstler counters · Top creel CONDITION Machine assembled, currently protected with film for storage. Viewing, inspection, and a running test on-site can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6858, Jumberca MIL model double-sided circular knitting machine, machine number 6858, year 2000. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). CE marked. NAMEPLATE DATA: · Diameter: 33 inches · Gauge: GG 18 · Number of needles: 1860 + 1860 · Maximum speed: 20 rpm · Power: 8.4 kW · Voltage: 380 V · Frequency: 50-60 Hz · Maximum air pressure: 6 bar · Weight: 2,890 kg · CE marking APPLICATION: Large-diameter double-sided knitted fabric: interlock, rib, fabrics for mattresses and home textiles. INSTALLED EQUIPMENT: · Control cabinet with start/stop buttons · Electronic lubricator Memminger-IRO Pulsonic 5.2, with oil · Upper fillet Gsdpszvhzxjfx Afujkc POWER SUPPLY: 50-60 Hz. The nameplate indicates 50-60 Hz, so the machine is suitable for both European networks and 60 Hz networks without frequency conversion. CONDITION: Complete and assembled machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Weight according to nameplate: 2,890 kg · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain.

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Gedpfezvhx Rsx Afuokc Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. YEAR Approximately 1990, based on the serial number and the nameplate. CE MARKING The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Disassembly: No disassembly required Location: Albacete, Spain

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit Gksdpfsw D T Dkox Afusc T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm Gsdpfsfc T Ufjx Afuekc saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,210 t dimensions 0,9 x 1,4 x 1,4 m Manual circular saw machine for sawing aluminum, miter cuts 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm

Condition: new, capacity Ø 30 - 160 mm Saw Body 30 Grad Linear Schlitten sawing motor 15 kW hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Saw speed 30-120 rpm /min saw-blade dia. Ø480 x 2,25 x 2,7 x 50 mm control Siemens Gedpfx Ajy Aplusfuekc hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl weight of the machine ca. 5550 kg required space 3200 x 7600 mm Please use the contact form for price information. GERD WOLFF GLS-160 High-performance circular saw Introducing the new generation of High-Performance Metal Circular Saws, seamlessly blending precision and efficiency with German quality. Our High-Performance Metal Circular Saw machines are setting the standard in metalworking thanks to their innovative technology, allowing for precise and effortless cutting of steel of any kind. From 10 millimeters to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within seconds. At the core of these machines are their automatic functionalities, coupled with an advanced ball screw spindle and an automatic material feeding system. This combination ensures not only maximum precision but also impressive speed. A Siemens motor and Siemens PLC screen guarantee reliable performance and easy control. Moreover, our High-Performance Metal Circular Saw machines feature a special system for quick and convenient blade changes. The hydraulic material tension provides secure fixation of the workpiece during the cutting process. Additionally, a programmable misting system is integrated to ensure optimal lubrication and cooling of the saw blade, extending the tool's lifespan. With our servo and driver technology, you have full control over your manufacturing processes, allowing you to optimize production and achieve the highest quality standards. Choose our High-Performance Metal Circular Saw machines and embrace the future of metalworking – precise, efficient, and reliable.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 316792, total length: 2,700 mm, total width: 1,450 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,500 kg, Equipment: documentation/manual, Kaltenbach SKL452 NA including ESTA DUSTOMAT – Year of manufacture 2023 We are offering our Kaltenbach SKL452 NA including ESTA DUSTOMAT for sale. We purchased the machine directly from Kaltenbach as a new machine in 2023 and have since used it in the metalworking department of our WfbM (workshop for people with disabilities). The machine was used exclusively for cutting aluminum profiles. It was operated in a single-shift system with a maximum of approximately 6 hours of machine runtime per day. The machine can be inspected on-site after prior arrangement. Collection / Transport Godpfsz H Sgdjx Afujkc The machine is offered for sale exclusively at our location. Dismantling, loading, and transport must be organized and carried out by the buyer. If you are interested or would like to arrange a viewing appointment, please contact us.

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm Gksdel R Nnnspfx Afuec capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Year of construction: 1991, condition: ready for operation (used), Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible. Godpfxoyarq Tj Afuskc

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Gsdpowrb U Tjfx Afuekc

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Godpfex Avtvsx Afuekc Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Godoufgnzepfx Afuokc Table size 1000x630mm

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Gjdpfxoxzfqbe Afuekc Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: good (used), Mitre and cross-cut saw for aluminium. Swivels left and right up to 45° and tilts up to 45°. Saw blade diameter up to 250 mm. Gsdoy N S Hzjpfx Afuekc

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Gedpoz Hpazsfx Afuekc Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: used, Year of construction: 2003, saw blade diameter 510 mm cutting diameter 150 mm capacity 90 degrees: flat 450 x 150 mm capacity 90 degrees: square 150 mm turning speeds 29 / 58 m/min. total power requirement 4,2 kW weight 1,55 t range L-W-H 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed - hydraulic workpiece clamping Gedpfeyrhurjx Afuekc - 4 spare saw blades

Condition: good (used), saw blade diameter: 350 mm, – Saw blade, 350 mm – Double miter cut – Hydrocheck system – Protective cover Gedjunh H Ejpfx Afuskc – Mist lubrication system – 400 V

Condition: used, Year of construction: 2018, saw blade diameter 550 mm weight ca. 650 kg Under-table saw for aluminum and PVC Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Gsdpszvhm Uofx Afuskc Mitre cuts up to 60° on both sides Full protective guard very good condition! The saw was rarely used; it served as a backup machine

Condition: excellent (used), Catalog number: 7937 TECHNICAL DATA - max. disc diameter: 500mm - spindle diameter: 30mm - pneumatic top pressure - disc guard - pneumatic disc extension Gsdpfszrnt Hox Afuokc - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - diameter of dust extraction nozzles: 120mm - table dimensions (length/width): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table + guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall dimensions of the machine (without table) (length/width/height): 1200x640x1280mm - weight: approx. 500kg ADVANTAGES – Polish-made – original technical documentation – 2 roller tables – pneumatic disc stroke – used saw, in perfect condition Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in exchange rates)

Condition: used, Year of construction: 1990, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm Gkedpfxswvl E Rs Afuoc capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min total power requirement 2,5 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base

Condition: excellent (used), CATALOG NUMBER: 7991 TECHNICAL DATA - max. disc diameter: 400mm - disc bore diameter: 30mm - disc guard - adjustable arm (up/down) - max. cutting height: 120mm - max. cutting width: 540mm - hydraulic saw feed - 3 feed rollers in the table - motor: 3.7kW Gedpjztq Ntofx Afuskc - hydraulic pump motor: approx. 0.55kW - dust extraction port diameter: 110mm - roller width: 530mm - machine dimensions (L/W/H): 1900x1500x1950mm - weight: 650kg ADVANTAGES – Made in Poland – DTR documentation included – Very good condition – Used saw Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: as good as new (ex-display), Year of construction: 2025, Sawblade tiltable 0-45 ° Length of the rolling table 3350 mm cutting width 1100 mm Motor output 5,5 kW Cutting height 155 mm Godewyd Tuopfx Afuekc Cutting height at 45° 110 mm Saw blade diameter 450 mm Speed 3000 | 3600 | 4200 U/min.

Condition: used, Year of construction: 2022, Circular saw complex Manufacturer: WoodVER Type: UPK-1 Year of manufacture: 2022 Technical data Maximum diameter of the log being processed: 1000 mm Length of the log being processed: 2.0 - 6.5 m Saw diameter: 550 mm Saw rotation speed: 1500 (3000) RPM Power of the main motors: 2 x 18.5 kW Productivity: 12 - 20 m3 / shift - Automatic feed of the carriage with adjustable travel speed - Digital ammeter integrated into the control panel - Three-part frame with two guides for perfect geometry - Remote control with CNC system - Three-stage soft start system - Laser pointer for cutting lines - Digital cameras with an 18.5-inch display, installed in the remote control - Four hydraulic side clamps, four end clamps - Hydraulic log tilting device that performs the function of log tilting and simultaneously serves as the log centering device on the frame. - Scraper conveyor Note: Gkedpfx Afjzuy Axsuoc The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2000, Panel saw with scoring unit 3 m sliding table Length adjustment via display Width adjustment by hand Height adjustment converted to foot-operated hydraulic system with clamping bar for veneer or other materials Gkjdpfx Aotw Hd Ajfujc