Used Claas Arion 470 Cis+ Ackerschlepper for sale (1,260)

Condition: good (used), driver's seat, forklift seat, tractor seat, tractor seat -Manufacturer: Klepp, driver's seat with suspension -Type: unfortunately without a type designation -Adjustable rails: with hand lever -Weight adjustment via handwheel -Dimensions: 500/470/H560 mm Nwedpfx Akox Ivrxjujg -Weight: 20 kg

Condition: ready for operation (used), Year of construction: 2016, The specifications for the 2016 Horizon BQ-470 perfect binder are as follows: Attribute Specification Source Binding Method Binding with milling, binding without milling, and padding SI Modul for measuring the thickness of the book - this information automatically is transferred to the machine Number of Clamps 4 Maximum Book Size 320 x 320 mm (12.59" x 12.59") Minimum Book Size 145 x 105 mm (5.71" x 4.14") Book Thickness 1 to 65 mm (0.04" to 2.56") Maximum Cover Size 320 x 660 mm (12.59" x 25.98") Minimum Cover Size 135 x 225 mm (5.32" x 8.86") Cover Weight (Normal) 81.4 to 302.4 gsm Cover Weight (Coated) 104.7 to 348.9 gsm Cover Pile Height Max. 150 mm (5.9") Cycle Speed (EVA) Max. 1,350 cycles per hour Njdpfoyku Rqjx Akuswg Milling Depth Up to 4 mm Dimensions (L x W x H) Approx. 3,630 x 1,050-2,240 x 1,800-2,000 mm Approximate Weight 2,100 kg

Condition: good (used), Core drill, crown drill, masonry drill, core drilling machine, diamond core bit, drill bit -Core drill bit: Ø 150 mm -Drill bit length: 470 mm Nwjdpfxjb A Sm Ae Akusg -Quick-change mount -Weight: 5 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25 mm Nwedpfxsc Spnre Akuog -Total length: 470 mm -Total height: 195 mm -Weight: 18 kg

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, revolving drawer cabinet Nwedpexbzddefx Akusg -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 6 rotating drawers, division/height see photos / height adjustable in hole pattern -lockable: without bowl -Dimensions: W 720/470/H 1000 mm -Weight: 84 kg

Condition: ready for operation (used), Heidenhain LS 603 length measuring rod ML 470 mm Id.336 972-6T SN:12359072E + AE LS 603 reading head Id. 326 799-01, the article has been refurbished, used, normal signs of wear, 100% functional, scope of delivery as per photos Nwsdpfercvkbsx Akuog

Year of construction: 2025, condition: as good as new (ex-display), The "RH S" spray cleaning system is a compact, space-saving, fully automatic cleaning system designed to meet demanding requirements for cleaning/degreasing and drying results. Component cleaning can be performed with the basket in a stationary, swiveling/oscillating, or rotating mode. The spray system, featuring multiple spray bars mounted on the longitudinal and end sides, is fixed inside the working chamber. Basket dimensions: LxWxH 470x320x200(h) mm Two baskets can be washed in parallel (simultaneously) Maximum loading weight: 100 kg Spray pressure (wash cycle): 4 bar, Circulation rate: 360 l/min Control: Siemens S7-1200 with KTP700 touch panel Includes hot air drying (12 kW) Includes compressed air impulse blowing Includes steam extraction Includes stainless steel exterior cladding Includes preparation for retrofitting an oil separator Includes bag filter for medium maintenance Includes 2 stainless steel wire baskets, 470x320x200(h) mm System dimensions: LxWxH 1,425x1,920x1,980(h) mm Dimensions include open loading door Electrical connection value: approx. 25 kW Nodpfx Aksgrm Dfsuowg

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: Nedpfx Asvmpx Rjkuowg - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 470 x 470 mm, 20 plates, open spout, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 84 liters, filter surface 7m², dimensions 2300 x 800 x 1200 mm, weight 850 kg, hand or motor hydraulics, drip tray, filtrate, with or without filter cloths Nwedpfxjfbbpks Akueg

Condition: good (used), Year of construction: 2005, functionality: fully functional, TRENNJAEGER TUS 470 with ball screw and heavy-duty spur gear for burr-free cold sawing of profile, panel, square, and round material in straight and miter cuts, pivotable on both sides from 90 degrees to 45 degrees to 30 degrees, with digital angle display (built in 2005) - Cutting range with saw blade ᴓ 450 mm: 90°, 45° right/left, 30° right/left - Round 140 mm 140 mm 130 mm - Square 110 x 110 mm 110 x 110 mm 110 x 110 mm - Rectangular 290 x 40 mm 190 x 40 mm 130 x 40 mm - Rectangular Profiles 290 x 70 mm 190 x 70 mm 130 x 70 mm This increases by approximately 10 mm for a saw blade ᴓ 470 mm - Maximum clamping range of the machine: 290 x 150 mm - Working height: 900 mm Nodpfxsv Ryaao Akuswg Machine is supplied without infeed and outfeed

Condition: used, Year of construction: 2001, Number of printing units: 8 Nedpfxjx E Tm Uo Akuowg Web width: 1,270 mm Print width: 1,200 mm Print repeat: 300 - 1,000 mm Unwinder type: Double Axis Drop Splice Rewinder type: Turret Fully Automatic Splice Drying: Hot air – electric heaters Video camera: BST Euroscope Web guides: Yes Material: Plastic webs Camber doctor blades number: Yes Ink pumps: 8 Type of ink: Solvent based Transmission: Bull gear Length/Side registers: Motorized remote controlled

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 840x540x1980 mm Nwjdpfxovz Hdao Akuog Weight 158 kg Total power requirement 2,1 kw

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade Nwedpfxsxzrx Ee Akuog 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Condition: used, Year of construction: 2003, Number of inking units 8 Max. printing width 900 mm Max. material width 950 mm Min. printing length 280 – 650 mm Nwodpfx Akew Hryvoujg Max. mechanical machine speed 250 m/min Material to print: PE, OPP, Paper Repeat of design, 280 mm - 650 mm printing sleeves for 1.14. plates (more the 150 sleeves) printing sleeves for 2.54 plates (approx 50 cylinders) corona, slit, automatic winders quick sleeve and anilox change system Two edge guides Ink pumps Doctor blade system camera system

Condition: used, Year of construction: 1996, Year: 1996 / overhauled in 2008 Technical specifications and equipment: • 8 printing units Material width: 620 mm Printing width: 600 mm Print repeat lengths: 250 – 520 mm Nedpsxfvrwjfx Akujwg Materials processed: • PA: 20 – 60 µm • LDPE: 20 – 150 µm • HDPE, OPP and similar films: 12 – 80 µm, max. 120 µm • Laminated films • Paper: 25 – 120 g/m² Mechanical machine speed: up to 200 m/min (depending on substrate) Main equipment: • Impression cylinder with new nickel-plasma coating • Impression cylinder temperature control unit • Non-stop unwinder with web tension measurement and control, including splice table, roll diameter 600 mm, core ID 76 mm • Nip roller before 1st printing unit • 8 doctor-blade printing stations • Speed assist system • Drive elements from the printing unit to the bridge • Intercolor dryers • Web guiding before printing • Bridge with bridge dryer • Web video inspection system • Edge guiding before rewinding with 3 slitting discs and suction • Non-stop rewinder with pneumatic slitting and web tension measurement and control, roll diameter 600 mm, core ID 76 mm • 8 chamber doctor blades plus 8 additional coated doctor blades • 8 electric pumps, new • 8 ink vessels (10 L each) with hose connections, new • 8 ink catch trays plus 4 extra trays • 1 service trolley for anilox roll and sleeve handling • 1 service trolley for chamber doctor blade and ink tray handling • 8 printing sleeves, new, print length 320 mm, make: Rotec Conductive Blue Light • 8 format gears, new, print length 280 mm • 8 ceramic anilox sleeves, new. Base bodies ordered from Apex. Company Wareg will obtain required sleeve type directly from Apex; only for UniFlex sleeves will Wareg incur the additional costs. • ATEX-compliant • New Siemens S7 control system

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x500x2000 mm Weight 180 kg Nsdpfx Akevz Evbeuswg Total power requirement 2,57 kw

Condition: new, machine/vehicle number: dc46d2e1cd272305b99fb3160, empty load weight: 9,800 kg, maximum load weight: 31,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Vehicle consisting of: Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Quarter-shell mudguards in front of and behind axle unit 1st pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, slanted towards the entrance. Length at bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in main beam area 260 mm higher than wheel recess. 2nd pair of wheel recesses between A and B axle. Bottom length approx. 350 mm, depth approx. 260 mm. Note! Frame in main carrier area 260 mm higher than wheel recess. If wheel loaders are to be driven and the overall height is to be checked, we request a technical data sheet for the wheel loader types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses are required by the customer). Wheel recess cover can be pulled out from the main frame, with wooden inserts. Widenings extendable to 3,000 mm (not in the rear slope and not in the wheel recesses below) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 2 pairs of ring lashing eyes, 5 tons each at the front on the gooseneck 11 pairs of lashing rings at the top and sides, each 10 tons, embedded in the outer frame 2 x on gooseneck9 x in low loader bed distributed first lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets 5 to. Ring lashing eyes embedded in the floor Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle - driving stability system Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 x LED rotating beacon with holder, switched via parking light (removable light) Nedpfx Akoi Ri Hcjuowg 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel / checker plate covering Storage box embedded in drive-over slope to gooseneck Then with 70 mm softwood floor, in the wheel recesses underneath and in the wheel

Condition: new, machine/vehicle number: 2428b2018baf171e60fef6740, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions, 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Rear spray flaps across the entire width Mudguards in front of 1st axle and rear of each axle with anti-spray, according to EC Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 2 pairs of ring lashing eyes, 5 tons each at the front on gooseneck 11 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 2 x on gooseneck 9 x distributed in the low loading area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17.5 brand of the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Colored line routing for easy servicing. Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle - driving stability system Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 LED rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with sheet steel covering Storage box recessed in drive-over slope to gooseneck Then with 70 mm softwood floor, steel/ checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 9 200 mm Drive-on ramps Nwedpfx Akji Ri E Reujg Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK socket NW 10/3, without connecting hoses Operating instructions With 10,000 kg axle load, a special permit is required, only indivisible load possible!!! Special permit required if total train weight exceeds 40 tons! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) When applying for a special pe

Condition: new, machine/vehicle number: 364a8214fd0c4afa2b936c7db, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions (not in conjunction with forced steering) 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation Folding rear support Wheel chocks with holder Aluminum side collision protection Spray flaps in front of 1st axle and rear of each axle with anti-spray, according to EC Stainless steel storage box, w=600/h=400/t=500 mm, with polished door, lockable Lifting table to gooseneck, approx. 3000 mm long, can be raised hydraulically to pass over the gooseneck, with mechanical lock when raised. Operation with radio remote control Electric cable winch, 24 volt, tractive force 8165 kg, mounted in the middle at the very front of the loading area, standing on the gooseneck, in stainless steel box with door (if technically possible, exact testing still required), operation with radio remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers on gooseneck and rear inclination. Low loader lashing eyes Gooseneck:5 pairs of lashing eyes recessed in the outer frame, each with 5 to.2 pairs of lashing eyes in the middle, each with 5 to.1 pair of lashing mushrooms on the top and outside of the outer frame recessed in the neck slope, each with 10 tisch:4 pairs of lashing eyes recessed in the outer frame, each with 5 to.4 pairs of lashing eyes in the middle, each with 5 to. Pair of lashing eyes in the middle, each 5 to.1 pair of lashing mushrooms at the top and outside of the outer frame, each 10 fbett:4 pairs of lashing eyes in the outer frame, each 5 to.5 pairs of lashing eyes in the middle, each 5 to.4 pairs of lashing mushrooms at the top and outside of the outer frame, each 10 to. Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Nsdpfx Akoi Ri E Usujwg Air suspension with lift & lower valve, with hold function for lowering + auto-reset function Wheels and tires 235 / 75 R 17,5 according to manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear Lights completely in LED design (note! with certain towing vehicles, misdiagnosis may occur, although the function is given) 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Additional LED work light(s) at the rear, switched via reversing light LED rotating beacon with holder, switched via parking light (light can be removed) Pair of warning signs, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck covered with Mega Gri

Condition: used, mileage: 986,600 km, power: 345 kW (469.07 HP), first registration: 03/2002, fuel type: diesel, empty load weight: 10,000 kg, overall weight: 26,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 6x4, wheelbase: 3,900 mm, brakes: retarder, color: blue, gearing type: mechanical, emission class: euro3, suspension: steel, Equipment: ABS, additional headlights, air conditioning, differential lock, low noise, onboard computer, parking heater, traction control, Displacement 11,705 ccm Hydraulics (power take-off) Tipping hydraulics Nsdpfxjuzk Due Akuowg Light alloy rims Particle filter Payload 16,000 kg 09/2017 at 805,900 km replacement engine installed and clutch renewed Cab with air suspension Sun visor Rotating beacons Compressed air horns Central lubrication 1 couch Carnehl CHKS / HH round steel trough Color blue First registration 04/2008 ABS BRAKE Drum brake EBS 2 axles Wheelbase 1,310 mm Tire size 425/65 R22.5 Gross vehicle weight 32,000 kg Payload 24,620 kg Unladen weight 7,380 kg Load compartment length 7,350 mm Load compartment width 2,340 mm Load compartment height 1,460 mm Load volume 23 m³ Air-lift suspension 7 mm + 4 mm wear floor Swinging hydr. tailgate roller tarpaulin platform BPW axles Folding underride guard Errors excepted

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine Nwedpew Ah Nljfx Akusg - fully functionalmanufacturer: Keba type: DI 470/A Kemro K2-400 manufacturer no.: 054943

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine Njdpfx Aow Ah N Eskuewg - fully functionalmanufacturer: Keba type: DI 470/A Kemro K2-400 manufacturer no.: 054943

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Additional key for office programming software Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 90 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 11 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher carriage with 9 clamps Blade carriage speed 120 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Nsdpfx Akevtbzkeuowg

Condition: like new (used), Year of construction: 2006, Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Heating Power: Example listing ~ 10.2 kW Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Nodsxqx H Ijpfx Akuowg Machine Weight:4 500 kg

Condition: used, mileage: 765,000 km, power: 346 kW (470.43 HP), first registration: 02/2005, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, Year of construction: 2005, Equipment: ABS, air conditioning, had accident, SCANIA R 124 470 / 6x2 HOOKSYSTEM Imported / Motor Problem ? YEAR OF PRODUCTION: 2005 ? MILAGE: 765 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? AIRCONDITION ? ENGINE BRAKE ? POWER STEERING ? TACHOGRAPH CAPACITY: 14 000 kg TOTAL WEIGHT: 26 000kg WHEELBASE: /138 cm TIRE SIZE: FRONT: 385/65R22,5 BACK: 315/80R22,5 SPRING SUSPENSION TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? Nwjdopd Upijpfx Akusg (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????