Used Cordes Mc250.713 for sale (152)

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder - Servo-driven feeder - Left and right side-register sections - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes Laedpfx Aezlqwzscfof - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Condition: used, sheet width 1050 mm plate thickness 2,5 bei 400N/mm² mm roll diameter 90 mm Weight ca. 490 kg Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Bending roll adjustment via handwheel; suitable for conical bending Lajdpfxjzfayfj Acfsf Emergency stop cord The machine comes from a training workshop and is in very good condition

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg Laedoxgpaqepfx Acfjf

Condition: excellent (used), Strapping machine SIVORON / GIGANT Model S 669 L integrated strap reel belt width 6/ 9/ 12/ 15.5 mm Electrical connection 230 V, 50 Hz Adjustable belt tension Temperature welding system idle rollers in the work table mobile with cord wheels Dimensions L x W x H = 1460 x 600 x 1600 Weight approx. 70 kg Note for used machines: Lodpfeuxm Haox Acfeaf - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Lodpsw I U Ecsfx Acfoaf Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: used, axle configuration: 3 axles, first registration: 11/2014, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, wheelbase: 8,940 mm, color: other, Year of construction: 2014, Equipment: ABS, = Additional Options and Equipment = - EBS - Lifting roof = Notes = Number of axles: 3, Payload: 32,150 kg, Unladen weight: 6,850 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inches, Suspension type: Full air suspension, ABS, EBS, Body year: 2014, Customs cord, Lifting roof, Sliding roof, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: ON-46-LX Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tyre size: 435/50R19.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 8 mm; Tyre tread right: 7 mm Axle 2: Tyre tread left: 13 mm; Tyre tread right: 11 mm Axle 3: Tyre tread left: 8 mm; Tyre tread right: 6 mm Weights Unladen weight: 6,850 kg Payload: 32,150 kg Gross vehicle weight: 39,000 kg Features Sliding roof: Yes Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our inventory includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Easy! • Large, fast-moving stock • Recognizable quality • Competitive prices • Reliable trading Lajdeytnvxjpfx Acfof • We speak many languages • We understand our customers • Support with import and transport • (Export) registration numbers are arranged quickly • Expert technical services • The assurance of "recognized quality" • And more… Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 600 mm, ✅ New & In Stock ✅ Ideal for Tall Grass & Large Meadows ✅ Shipping Available SCHORR FLAIL MOWER RR600HM HIGH GRASS MOWER 8HP 252CC MULCHER - Effortlessly mows tall grass and dense scrub - Powerful 252 cc 4-stroke engine (8 HP) – strong & reliable, even in thick vegetation - 60 cm cutting width – ideal for large areas and tall grass - 32 Y-blades made of hardened steel – efficient mulching of material up to 2.5 cm diameter - Robust 4-speed gearbox – 3 forward & 1 reverse gear for maximum control - Cutting height infinitely adjustable (20–80 mm) – precise results for any terrain - Self-propelled & easy to operate – even on slopes or uneven ground FEATURES / SPECIFICATIONS Whether it’s tall grass, dense brush, or woody growth: this flail mower gets the job done reliably and consistently. The SCHORR RR600HM is built for tough tasks – equipped with a powerful Loncin 4-stroke petrol engine (252 cc) delivering a solid 8 HP. At its core is a 4-speed gearbox (3 forward / 1 reverse), allowing precise control even in demanding ground conditions. With 32 robust Y-blades made from hardened steel mounted on a sturdy rotor, the RR600HM provides uniform and fine mulching. Whether on meadows, orchards, field margins, or fallow land – even branches up to 2.5 cm in diameter are processed with ease. Its 600 mm cutting width enables productive work while maintaining high maneuverability. The cutting height can be adjusted tool-free using the handwheel (20–80 mm), allowing flexible response to terrain and vegetation. The RR600HM is designed for intensive applications – be it overgrown gardens, large green areas, or agricultural environments. The robust construction, deep-tread drive wheels, and self-propulsion ensure confident traction – including on slopes and uneven ground. Up to 6,000 m² can be efficiently and comfortably managed with this flail mower. A professional-grade flail mower for demanding users, farmers, municipalities, or landscape contractors. For those seeking more than just a lawn mower, this machine provides real power at a fair price. Technical Data Manufacturer (abbreviation): SCHORR Manufacturer model: RR600HM Drive type: Self-propelled (3+1 speed gearbox) Blade type: Hammer flail Number of blades: 32 Y-blades Cutting height min. / max.: 20mm / 80mm Cutting width: 600mm Weight: without packaging: 146kg / with packaging: 180kg Basic Dimensions Overall length: 1790mm Overall width: 730mm Overall height: 1150mm Discharge angle: 360º Engine Air-cooled single-cylinder four-stroke (OHV) engine Displacement: 252cc Max. output: 5.9kW / 8HP Fuel type: Petrol (RON min. 95) Starter: Recoil starter (pull cord) Power transmission: V-belt Spark plug: F7RTC or equivalent Fuel tank capacity: approx. 5L Engine oil capacity: approx. 1.1L Lajdpfxswtqdmj Acfof Our knowledgeable team is happy to answer any questions you may have about the SCHORR RR600HM Flail Mower for High Grass. You can reach us by phone or email. We look forward to hearing from you and assisting with your inquiry. Find the initial investment for a flail mower too high? No problem, we also have some used machines in stock. Feel free to contact us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,700 kg, Shelf length: 3000 mm Shelf width: 1300 mm Hot water heating system Ledpfx Aszgf Uwscfoaf Two daylight openings 6 hydraulic cylinders Cylinder diameter: 85 mm Emergency safety pull-cord switch Timed press opening Daylight opening: 400 mm total / 2 × 180 mm Year of manufacture: 2006

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump Lajdpfot Nfarsx Acfsf • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Year of construction: 2026, condition: new, We also offer leasing and financing options. Please feel free to contact us! ‼️ATTENTION‼️ There are currently machines being offered on various platforms from China. Most CE markings are counterfeit. These machines are not EU-compliant. Their electrical configuration is also not approved for use in Germany. Several customers contacted us asking how to extract copper from such a machine, as all they got was shredded cable mixture. We tested these machines ourselves two years ago, and the customers are correct—these machines do not yield pure copper. These machines are not permitted for operation in Germany! Buy from us and make use of our expertise—see the machines for yourself at our Heilbronn facility. We provide long-term support and always help you to separate top-quality copper. Your Josan & Söhne Team! German quality, CE certified, EU-compliant, and available for live demonstration—not just edited or cut videos. We strongly recommend buying locally here in Germany. German guarantees, local laws, fixed prices, and German-language support in case of future issues. You get all this only with machines purchased from us. You're welcome to inspect our quality in person by appointment. Remember, videos can be edited. We offer live demonstrations‼️ We stock shredders and other recycling machinery for all recycling needs at our Heilbronn location! From copper recycling to plastics recycling—you can purchase all the necessary machines from us. Just ask! ‼️INSPECTION AT OUR FACILITY POSSIBLE‼️ Our compact model works just as perfectly as our larger machines, only smaller and more affordable. Top-grade copper granulate. Can be used in any garage. Approx. 20-30 kg input per hour. From stranded cables, extension cords, automotive cables, telephone cables, NYM cables—our machines can recycle it all! Josan Cable Granulator E30 We are happy to demonstrate the machine live in Heilbronn! Appointments only! We are based in Heilbronn as a German company, subject to German laws, with warranty and service! We also speak English! ‼️For further questions, please get in touch! We can only respond if you contact us with your name, address, email, and phone number. Any other inquiries may be filtered as spam. We will get back to you and provide preliminary advice! Here is our entry-level model: ➡️With 380 V ➡️For cable diameters approx. 0.1–30 mm ➡️Power approx. 4.2 kW ➡️Input approx. 20–30 kg/h ➡️Weight approx. 310 kg ➡️Dimensions approx. 88×74×173 cm ➡️With UVV (accident prevention regulation) executed by our German company With this machine, you can process cables into copper granulate. We also offer larger systems and accessories such as hydraulic cable cutters, electric motor breakers, triple-separators, etc. Complete solutions for cable recycling. Lajdpop E Efyefx Acfsf When you buy from us, you also buy our service! This is extremely important, especially with these machines! Please note: our service applies only to machines and accessories purchased from us. With our know-how and our machinery, you will reliably produce copper granulate—not unseparated material. Net price 8,999.00€ +19% VAT 1,709.81€ Gross price 10,708.81€ Our machines are CE-certified. Subject to errors. Images, prices, and features may differ.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 330, rotational speed (max.): 2,900 rpm, motor model: 5,5kW, Equipment: CE marking, STYROFOAM/STYRODUR GRINDER KP2 Lodpjy Nantefx Acfeaf 5.5 kW three-phase 400V electric motor Circuit breaker 1:0, power cord, 5-pin 16A plug 500 mm diameter grinding drum with hopper feed two granulate outlets with rubber clamps single-direction rotary knife with double blades 13 mm diameter screens positioned around the grinding drum operating capacity min. 4 m³/h The crusher allows the resulting granules to be bagged directly into bags or plastic sleeves, which are secured to the outlets using elastic rubber straps. All our shredders come with complete technical documentation (DTR), CE certification, and professional operating instructions

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator Ledjcvkalspfx Acfjaf The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Ledpfxsy Egkgo Acfeaf Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: excellent (used), Nordson Hot Melt Heated Hoses Lasdpfx Acewuqfysfof 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition

Condition: excellent (used), functionality: fully functional, The AERA blue-cord slicer optimizes industrial preparation with efficiency. Designed for fast, accurate cutting, it uses multiple ribbon slicers to guarantee uniform results. In addition, the trim conveyor handles products before cutting, while the blue-cord folder shapes each product perfectly. With its pneumatic control system and belt scrapers, the slicer ensures high performance. What's more, the titanium cutting carriage, equipped with automatic lubrication, reduces maintenance requirements. In conclusion, the AERA model improves both quality and production efficiency, while complying with industrial requirements. COMPOSITION : FILLING CONVEYOR Overall dimensions (L x W x H): 6400 x 1000 x 970mm. Weight: 970 Kg Sliding surface height: 960 +/- 50mm. Stainless steel tubular legs and jacks Synchronous belt width 600mm. Lyre-shaped winding Pneumatically-operated belt quick-release system Servo-motor control with positioning register. Belt scrapers TRANCHEUR Overall dimensions (L x W x H): 1880 x 1030 x 2460mm Weight: 1000 Kg Laedpfxou Ivcie Acfof Stainless steel frame: 20 mm Stainless steel panel housing with magnetic safety sensor and pneumatic locking during operation. Components : The slicer is equipped with 4 magazines consisting of : 4 synchronous pinned belt conveyors controlled by a servomotor 4 chutes defined according to the products to be sliced pneumatic control of chute release from loading belts CUTTING CARRIAGE Cutting is performed by a ribbon blade on 2 titanium 200 flywheels mounted on a titanium crosspiece The cutting carriage is guided by "Hepco inox" rails and rollers The cutting motion is driven by a Sew Usocome servo-reducer, a through shaft and two connecting rod-crank systems. The flywheels are driven by a Sew Usocome geared motor equipped with a transmission shaft and an expanding pulley for constant V-belt tension. A torque-limiting tensioning system enables correct adjustment of the tension on the ribbon blade. Cutting blade lubrication is provided by an automatic gun fed by a low-pressure water network. INFEED CONVEYOR : Slabs are received and distributed by a two-ply polyurethane belt conveyor driven by a Sew Usocome servo-reducer. Product deposited by a 16 mm diameter saber at the end of the conveyor. Quick belt release system. Open-worked bottom for easy cleaning. Conveyor made entirely of stainless steel.

Condition: used, Year of construction: 2000, Depalletising and palletising system for Euro pallets with PETCYCLE crates. The empties pallets arrive via a lift from above. They first pass through a pallet denester, in which the empties are fixed, the transport securing cord is cut off and vacuumed. The crates are then destacked and transferred to the bottle ejector. The pallets continue to the pallet magazine/loader. After the pallets have been reloaded, they are secured with a cord and transported upwards in the second lift. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletising and palletising Unloading capacity: 3600 crates/h Loading capacity: 3600 crates/h Power: 21 kW Voltage: 230/400 V Frequency: 50 Hz Compressed air: 6 bar, 30 Nm³/h Formats: Euro pallet, PETCYCLE crates, 20 x 0.5 l (400 x 300 x 256 mm), 9 x 1.0 l, 6 x 1.0 l, 6 x 1.5 l (300 x 200 x 365 mm) Running direction: right -> left Operation / Control: at control cabinet, Simatic OP17 / Simatic S7-300 Material: housing/frame constructions in black steel Position: free-standing with floor fixings Features: Pallet loading and unloading, roller conveyors, lifts for 1 x empty and 1 x full pallets, Eurapack pallet securing with cord extractor, unloader, pallet magazine, loader, Bornbinder pallet securing, protective grids, stairs and platforms, switch cabinets Lajdpfxox T Ak Ss Acfsf Layer patterns: composite stacking up to 5 layers

Condition: used, This listing is for a CS Cleaver Scientific LTD The Cube Dry Bath - 01 TCDB----- Cleaver Scientific TCDB – The Cube Dry Bath The Cleaver Scientific TCDB, known as "The Cube Dry Bath", is a compact, digitally controlled dry bath incubator designed for accurate and efficient sample heating in laboratory environments. It is ideal for a variety of applications, including enzyme reactions, nucleic acid denaturation, and other temperature-sensitive protocols. ----- Technical Details Condition: The TCDB is in excellent working condition with minimal use. Specifications: Model: Cube Dry Bath Incubator (Single Block Unit – Block Not Included) Ledpfxexzh Shs Acfeaf Voltage: 240V (unit spec), also listed as 110V, 50–60 Hz – please verify power compatibility Temperature Range: 5°C above ambient to 150°C Temperature Stability: ±0.2°C Temperature Uniformity: ±0.2°C Incremental Control: 0.1°C Timer: Up to 99 hr : 59 min, with continuous operation option Heated Power: 125W Controller: Digital Microprocessor Controller Weight: Approx. 2.1 kg Block Material: Molded Aluminum Alloy Block Dimensions: 79 x 104 x 50 mm Display: Dual LCD (temperature & time shown simultaneously) Safety Features: Leak-proof chamber, over-temperature protection, SSR fault detection Includes: Cleaver Scientific TCDB Cube Dry Bath Power Cord ----- Applications Ideal for use in: Restriction enzyme digestion DNA denaturation Coagulation studies Melting agar Hybridization procedures Hot Start PCR® BUN (Blood Urea Nitrogen) assays Incubation with water (mini water bath functionality)

Condition: as good as new (ex-display), Year of construction: 2026, Press area: 3000mm x 1300mm Opening: 450mm Heating: electric / thermal oil Maximum temperature: 120° Plate surface: stainless steel Press opening: automatic - timer / manual Emergency stop: yes, pull cord Pressing force: 120t Number of cylinders: 6 Current consumption: 36A Power consumption: 21 kW Laodpfehpl U Iex Acfof Machine length: 3600 mm Machine width: 1800 mm Weight: 4500 kg

Condition: like new (used), functionality: fully functional, - Shelf length: 3000mm - Shelf width: 1300mm - Clearance: 340mm - Number of pistons: 6 Ljdpey N Rcujfx Acfsaf - Piston diameter: 80mm - Oil heating - Hydraulic side pressure - Emergency stop – pull cord

Condition: used, This listing is for a Sartorius Cubis MSE2202S-100-D0 Balance with printer. The unit is in full working condition and is ready for immediate release. The Sartorius MSE2202S-100-D0 is a top-of-the-line balance from Sartorius’ Cubis series, offering precision, advanced functionality, and robust design, making it ideal for various laboratory settings. With a significant capacity and a range of built-in applications, this balance is suited for demanding weighing tasks. Key Features: High Capacity and Readability: Capacity: 2,200g Readability: 10mg (0.01g) This allows for precise measurements of both small and larger samples, making it versatile for different applications. Generous Weighing Pan: Dimensions: 206 x 206mm (W x D) Ample space for weighing liquids, powders, pastes, or solid samples without risk of spillage. User-Friendly Control Panel: Features a keypad and LCD display with text prompts for easy navigation and activation of functions, enhancing user experience. Built-in Applications: Comes with nine built-in applications for various tasks, including: Unit conversion isoCAL (automatic calibration) Density determination via the buoyancy method Net/total formulation Weighing in percent Lasdpfx Ajxxzhdjcfjf Counting Connectivity Options: Equipped with a USB port for data transfer to PCs (compatible with Windows 7, Vista, XP, 2000, ME, or 98SE) and an RS-232C port for connecting peripheral devices, allowing for easy integration into lab setups. Accuracy Features: isoCAL: Automatic internal calibration ensures precision based on temperature and time, reducing user intervention. Automatic Levelling: Achieved at the touch of a button, simplifying setup. Security Features: Includes a fastening point for attaching an anti-theft locking device, enhancing security in shared or public environments. Robust Design: Ingress Protection Rating: IP54, which protects against dust and water splashed from all directions, making it suitable for various lab environments. Operating Temperature Range: 5 to 40°C at 80% RH, ensuring reliable performance under different conditions. Technical Specifications: Capacity: 2,200g Readability: 10mg Linearity/Repeatability: 20mg/7mg Minimum Sample Weight (USP Standards): 10g Weighing Units: gram, kilogram, carat, pound, ounce, troy ounce, grain, pennyweight, milligram, parts per pound, Austrian carat, Newton, pound:ounce, microgram Display: LCD Power Supply: 100-240V, 50-60Hz (includes 120V line cord) Weighing Pan Material: Stainless steel Compliance: ISO, FDA, USP, GxP; IP54

Condition: new, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 300 mm, loading space volume: 0.7 m³, suspension: other, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS! Manufacturer: UNITRAILER Product code: UT004047 Model: Garden Trailer 230 Tipping GVWR max.: 750 kg Length of the cargo area: 2304 mm Width of the loading area: 1256 mm Tire type: 155/70 R13 Spare wheel with bracket: optional Wheel location: outside the cargo area Type of suspension: unbraked axle up to 750 kg Number of axles: 1 Side walls: steel Braked: no Side wall height: 300 mm Type of loading area: made of a screen-printed floor panel Tipping mechanism: yes Use: moving, in-house goods transport Unladen weight: 129 kg Total capacity: 620 kg Connector type: 7-pin, option to use a 13 to 7-pin adapter GVWR min.: 300 kg Reversing light: no Trailer UNITRAILER Garden Trailer 230 TIPPING What's new with our latest TIPPING model? Our new model is finally here! The new TIPPING series is characterized by new, improved features: - The new model has not only been equipped with a new hinge structure for the side walls, but also has a new, unique side wall design. - The ribbed surface of the side walls guarantees safe use and no sharp edges. - The lower edge of each side wall has been flattened to improve your safety when loading and unloading your goods. - The new side walls are 30 cm high, which means they are more compact than ever! - We have made this model even more user-friendly. It features design changes such as improved spacing between hooks for tarpaulin cords and an improved folding structure of the drawbar, which greatly reduces the need for a lot of storage space for the trailer. - The frame has also been redesigned, which means that the frame bars are easier to assemble. When you purchase our trailer in a set with a high frame, you will receive more vertical bars, which increases the stability of the entire structure. No more water on the tarpaulin! - This model has been equipped with revolutionary rear wall stops – the safety of the rear wall is thereby improved when the trailer is placed upright. You not only save a lot of space, but also secure the structure of your rear wall. Laodpfxsir H Sqs Acfjf Transport trailer UNITRAILER Garden Trailer 230 is the latest product from UNITRAILER. Currently, this model represents our second-largest car trailer with a GVWR of up to 750 kg. The trailer has a folding tailgate. This allows loading and unloading in just a few minutes. By using a tilting drawbar, the trailer can be placed vertically on the rear wall. We take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specified together with the registration documents within 5 working days. After you receive the trailer, you only need to register it to be able to use it fully. The purchased car trailer will be shipped within 48 hours with the complete set of documents. Buy now online! The car trailer is both tilting and very robust. Shipping from: €129

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug Ljdpfx Asx Ta Nxocfjaf 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Condition: new, Year of construction: 2025, The Optimat BD150 Floor grinding machine is the perfect complement to the SDP750 sander. It is ideal for leveling sanding, sanding wooden surfaces, finishing and renovation work, as well as for stairs, corners and edges. Thanks to its compact size, it ensures precise sanding quality. The edge sander is equipped with a powerful motor and an integrated dust extraction system. Laedpfx Acotw Smvofof The BD150 is suitable for Velcro and screw discs. The tiltable dust extraction pipe ensures that the dust bag is not damaged. Efficiency 5 m2/h Disc diameter 150 mm Engine speed 11,500 rpm Disc speed 3400/3700 ​​rpm Power consumption 1.1 kW Length of long nozzle 481 mm Dimensions (L x W x H) 552 x 246 x 410 mm Weight (without cord) 10 kg Sound power level 80 dB(A)

Condition: used, Year of construction: 2014, power: 2 kW (2.72 HP), General Equipment Designation: Plant for the shredding of residual wood Machine No.: 9495 Order No.: HZ 5814/14 Year of manufacture: 2014 Delivery/Document number: 3277061 Main Machine Manufacturer / Type: ZERMA Single-Shaft Shredder ZPS 2000 Version: Single-shaft shredder Drive power: 2 × 55 kW Serial number: #9495 Frequency inverter for ZPS 2000 (1 piece) Conveying Technology Discharge belt Type: WF 4000 x 2500 x 580 Drive: 1.5 kW Conveyor belt (inclined, mounted on shredder) Belt width (BW): 980 mm Axle spacing (AS): 5000 mm PVC belt with cleats Metal-free zone Lajdjy Dd Hvepfx Acfsf Pull cord and emergency stop Drive right: 1.5 kW Drawing No.: Q0911023 Unit No.: #9230

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle Lsdexfvahjpfx Acfoaf 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF 2x bellows d100 wbz 100-E1 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters