Used Costa Double End Profiling Machine for sale (76,804)

Condition: used, Pipe bending machine, mandrel bending machine, bending machine for pipes and profiles Pipe bending unit with Siemens servo motor and planetary gearbox Isded E A I Iepfx Aipstk Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round pipe Ø 15.4 x 0.8 mm, R60mm - interchangeable bending tools and bending dies - drive of the bending tool via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - pneumatic height adjustment of the bending die via Festo pneumatic cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm Weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The stated price refers to 1 piece of bending unit with servo motor. If required, we also sell individual components of the bending unit. We also offer the electrical components for controlling the servo motor. We also have hydraulic units for sale.

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Lower roller width: 115 mm Upper roller Ø 100 mm Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Iedpsxbtx Hefx Aipstk Weight: approx. 200 kg

Condition: ready for operation (used), Faccin profile bending machine Itjdpfxjy Abz Us Aipjk

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF Iodsgh T Iajpfx Aipotk - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm - weight: 110 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement Itjdpjd S Uf Sofx Aipsk capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable Iedpfxjgh T Hre Aipotk - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls Itedpfod A Nb Hsx Aipjk - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: used, Year of construction: 1976, Profile bending machine IRLE - B 160 HH Ijdpfx Asytn E Teipstk Technical data on photo

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 300 mm, number of spindles: 10, No minimum price – guaranteed sale to the highest bidder! The machine can be used either as a standalone unit or as part of a complete system: Isdpfxsyk Tvlj Aipstk - Joulin vacuum lifter + stacking task & feeding (Search ID: 21264612) - Canali ML 1100 TWIN F.L. 30 H.S. band resaw (Search ID: 21264817) TECHNICAL DETAILS Working width: 300 mm Feed rate: 140 m/min to 200 m/min MACHINE DETAILS Spindle configuration: Horizontal spindle Right vertical lift spindle Left vertical lift spindle Horizontal lift spindle Right vertical lift spindle Left vertical lift spindle Top horizontal spindle Bottom horizontal spindle Bottom horizontal spindle Bottom horizontal jointer spindle EQUIPMENT 10 spindles Multiple lift spindle system NC control All spindles with support bearings (hydraulic clamping) Planer table Precision work in terms of dimension and angle

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. Itsdpsxghngsfx Aipek You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, machine/vehicle number: 007650, Max working width: 450 mm Max. machinable height: 120 mm Isdpfxeu Evi Rj Aipjtk Gluing System: EVA Hotmelt

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Itsdju Eviqepfx Aipjk Gluing System: EVA Hotmelt

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Itsdpfx Aiortr D Iopok Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: used, Danley Onsrud, model WT-2-1284A, 460V, 3 phase profile machine, S/N 797387-01, with push button controls, winning bidder responsible for proper disassembly and removal, includes table with assorted components, and hydraulic unit with 3 phase electric motor and 35" width x 12" height x 24" depth tank and coolant unit, also includes (1) skid of assorted parts, no other info available, winning bidder responsible for proper disassembly and removal, and capping of all wires. Iedpfx Aioxdddrspetk

Condition: excellent (used), machine/vehicle number: 577EK51, REF: MM6187 1 x Webomatic double chamber vacuum packing machine supplied with 16 x filler plates. Technical specification ⚙️ ✅ Model - ED 120. Isdpfxjxn Rz Ej Aipotk ✅ Serial number - 577EK51. ✅ Sealing bars - 4 x 640mm long. ✅ Distance between sealing bars - 580mm. ✅ Vacuum pump - Busch RA 0100 E 5Z1. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 2.2 kW / 5.4 Amps.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, overall weight: 1,600 kg, Equipment: documentation/manual, EMMEGI Phantomatic 3400 Ijdpfx Aezvf A Tsipjtk Machine No. 268896 Vertical profile machining center with 3 controlled axes Processing of steel / stainless steel / aluminum / plastic Data for profile machining center: Phantomatic 3400 Year of manufacture: 2002 Length approx. 3.80 m Maximum bar processing length: 6.80 m Height approx. 1.80 m Depth: Speed: Power: 7.5 kW / 16A Total: approx. 1500 kg Weight approx. 1 ton Accessories: various tool holders / collets Condition: used, functional / overhauled, see video Processes materials made of PVC, aluminum, and steel (wall thickness up to 3 mm). Technical data: X-axis travel: 2400/3400 mm Y-axis travel: 240 mm Z-axis travel: 230 mm Motor spindle: 5.5 kW Speed: 18,000 rpm Tool change: manual Tool holder: ISO 30 Power supply: 380 V / 16A Weight approx.: 1000 kg Further data, see image data sheet. The machine is still connected to power and can be inspected by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, JWV service is proud to present the new Carif 260 Auto. Itedpfx Ajzlf Dcsipjk This fully automatic and compact bandsaw machine is manufactured in Italy using European components. As the importer, we can arrange a demonstration of the machine at your location.

Condition: new, Year of construction: 2026, functionality: fully functional, New double miter band saw machine, equipped with a frequency converter. Iodpfx Aozu Db Eeipjtk Suitable for cutting various materials.

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3458 F, working width: 2,500 mm, Double tenoner FRIULMAC 2003, 3+3 heads Itedpfxox Rdrfj Aipsk

Condition: used, Year of construction: 2006, - Veneer bundle length (fiber direction): 400 - 4000 mm - Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm - Veneer bundle thickness: approx. 10 - 40 - Throughput speed: approx. 27 m/min. Double gluing machine for veneer Manufacturer: Monguzzi, Carugate Type: Gluemaster Year of manufacture: 2006 For reliable, uniform, and precise application of PVAc or UREA adhesive in a single pass on veneer bundles that are joined parallel on both sides. Fine adjustment of the adhesive quantity and the uniformly applied lateral and vertical pressure on the veneer bundle result in precise, spot-free, and perfectly glued veneers with minimal adhesive consumption. Technical data: Itedpfozuzp Tox Aipek Veneer bundle length (fiber direction): 400 - 4000 mm Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm Veneer bundle thickness: approx. 10 - 40 Throughput speed: approx. 27 m/min. Special features: - The Gluemaster can be positioned directly next to a veneer gluing machine. - Quickly and easily accessible adhesive containers for fast and easy refilling or cleaning. - Tool-free removal of the adhesive containers and easy cleaning (no dead spots). - Continuous pressure rollers and large pressure plates for uniform pressure on the veneer bundle/edges during gluing. - Rigid 4-point upper roller guide with floating upper rollers to press the veneer bundle without damaging it. - Easily adjustable adhesive quantity. Adhesive pot cooling unit For a longer service life of the adhesive pot, especially recommended for the use of UREA adhesive. 1 motorized discharge roller conveyor To feed the glued veneer bundle out of the Gluemaster and transport it to the connected Fanningmaster. Length of the roller conveyor: 3600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, - 6 working spindles - max. working width 250 mm - feed rate 6 - 24 m/min used planing and profiling machine Manufacturer: HOMAG Type: Optimat LPP306 Year of construction: 2019 OPTIMAT LPP306 Planing and profiling machine with 6 working spindles. Workpiece width after processing: - min. 10 mm - max. 250 mm Workpiece height after processing: - min. 10 mm - max. 160 mm Control system: - PowerControl with powerTouch LPP300 Infeed table 2,500 mm Feed rate min. 6 m/min max. 24 m/min FIRST LOWER SPINDLE: - Spindle motor power 7.5 kW - Siemens IE3 energy-saving motor Power speed range: - 7.5 kW - 6,000 rpm Spindle diameter 40 mm Spindle length 281 mm FIRST RIGHT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 176 mm FIRST LEFT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor Iodpfx Aszuzf Ujipjtk - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length: 176 mm Total length: 176 mm FIRST UPPER SPINDLE: - Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm SECOND UPPER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm SECOND LOWER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. Iodpfx Aiozuzfhspotk - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Isdozuzfbspfx Aipjtk Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt Itsdpfx Aiozuzb Aopek 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. Isdjzuyqijpfx Aipetk - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented