Used Cutting Machine Lever Cutter for sale (67,872)

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: Laodsy Snyijpfx Ammjc max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Machine dimensions (folded) 2020x3380x1200mm Net price: 16000 PLN Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR Ledeyvivmopfx Ammsac (Price may change with larger exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Polar 78 X Year of manufacture: 2004 Cutting width: 78 cm Air table with side tables Program Laedpfx Ajzdvg Sommsc Spare blades Lighting units Immediately available

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 18,948 h, machine/vehicle number: A0215A0087, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 75 mm, No minimum price – guaranteed sale to the highest bidder! A maintenance checklist from December 2025 is attached! The defects listed there have been completely rectified (see attached activity report from Trumpf)! TECHNICAL DETAILS Working area X-axis: max. 3,000 mm Working area Y-axis: max. 1,500 mm Working area Z-axis: max. 75 mm Speed X: max. 60 m/min Speed Y: max. 60 m/min Speed Z: max. 60 m/min Simultaneous speed X/Y: max. 85 m/min Sheet metal thickness, steel: max. 12 mm Sheet metal thickness, stainless steel: max. 6 mm Sheet metal thickness, aluminum: max. 5 mm Workpiece weight: max. 575 kg MACHINE DETAILS Control system: B&R Arnco Laser type: TruCoax 2000 Laser power: 2,000 W Dimensions and weight Ljdpfxszdp Ntj Ammeac Footprint (L x W x H): 7,400 x 3,300 x 2,300 mm Transport width: 2,464 mm Weight: 9,000 kg Electrical connection: 65 kVA Operating hours (as of December 17, 2025) Operating hours, laser: 18,948 h Laser beam on-time: 3,635 h EQUIPMENT Closed machine frame with integrated laser head Motion unit for high-precision machining Drives with maintenance-free three-phase servo motors Sheet metal support accessible from both sides Enclosed beam guidance Fully integrated cooling unit Traveling extraction system Collection container for falling parts under the working area Positioning laser diode FocusLine

Condition: new, functionality: fully functional, Year of construction: 2025, controller manufacturer: Aore, laser power: 6,000 W, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 10 mm, travel distance X-axis: 3,015 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 315 mm, Control System CNC control: AORE Software: AORE Cypcut PC: WINDOWS Technical Data Maximum laser power: 6 kW Cutting area: 3050 x 1510 mm Lodpfxezf Hqws Ammoac Maximum workpiece weight: 1440 kg Length (mm): 8270 Width (mm): 2280 Height (mm): 2150 Equipment Automatic pressure control for O2 Automatic pressure control for N2 Fume extraction unit Automatic focusing head Complete safety enclosure for the operator Light curtains for the loading table

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Thorwesten PBZ3 machining center for optimized processing of profiles. Lodpfxezfvf Rs Ammoac The tool carousel enables variable angles for all tools. All machining operations – milling, drilling, and screwing – are performed in a single pass. A dynamic screwdriver reduces processing times.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, cutting speed: 10,000 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 200 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 3,150 kg, total length: 9,530 mm, total width: 1,950 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF6020T Tube Laser Cutting Machine – 1.5–6kW Fiber Laser Tube Cutter, TÜV-CE Certified The SENFENG SF6020T is a versatile and efficient tube laser cutting machine for the precise processing of round tubes, square tubes, rectangular tubes, and various profiles. With laser powers ranging from 1.5kW to 6kW, it is suitable for metal fabrication companies, tube processors, furniture manufacturers, fitness equipment production, construction machinery, vehicle frames, shelving systems, and general industrial manufacturing. The SF6020T is equipped with follow-up support, a pneumatic self-centering chuck, and a professional CNC system for tube processing. It offers stable cutting performance, strong dynamics, and reliable accuracy in daily operation. Key Technical Data: • Model: SENFENG SF6020T • Laser Power: 1.5–6kW • Tube Length Range: 2000–6500 mm • Round Tube Range: Φ20–Φ220 mm • Square Tube Range: □20–□150 mm • X/Y Positioning Accuracy: ±0.05 mm • X/Y Repeatability: ±0.03 mm • Maximum Rapid Traverse Speed: 100 m/min • Maximum Chuck Speed: 100 rpm • Maximum Acceleration: 1.0G • Maximum Tube Load: 200 kg • Tube Weight: ≤33 kg/m • Machine Weight: approx. 3150 kg • Machine Dimensions: approx. 9530 × 1950 × 2200 mm • Power Supply: 3-phase, 380V / 50Hz • Protection Class Main Power Supply: IP54 • TÜV-CE Certified Lajdpfx Amezd Enxjmjc Processable Tubes and Profiles: • Round Tubes • Square Tubes • Rectangular Tubes • Oval Tubes (on request) • I-Beams • U-Profiles / Channel Steel • H-Beams • Equal-Angle Steel • Unequal-Angle Steel The pneumatic self-centering chuck enables fast and efficient clamping. The lightweight, low-inertia design supports high rotational speeds, reduces energy consumption, and lowers operating costs. The integrated chuck cover protects against dust and cutting debris, increasing reliability during continuous operation. The follow-up support system supports long tubes during processing and reduces accuracy losses due to deflection. The machine bed is made of welded rectangular tubes and is stress-relieved and precisely machined. This ensures high rigidity, low vibration, and long service life. The FSCUT 3000DE-G CNC system was specifically developed for tube laser cutting. It supports real-time compensation of tube center deviation, automatic loading and unloading, follow-up support function, tube process library, TubePro cutting software, and professional TubesT nesting software. Optional Automation: • Semi-automatic Loading System • Simplified Fully Automatic Loading System • Fully Automatic Loading System • Standard Unloading System 2 m • Optional Unloading System 3 m / 4 m SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to enable fast service support and reduce potential downtime. Other available TÜV-CE certified SENFENG tube laser models: SF6020T, SF6035T, SF6038T, SF9020T, SF6020NT, SF6038NT, SF9032NT, SF9035NT, SF9038NT, and SF12038NT.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,010 mm, working width: 1,510 mm, working height: 100 mm, travel distance X-axis: 3,010 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 100 mm, cutting speed: 100 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,100 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 5,230 kg, total length: 4,921 mm, total width: 2,225 mm, total height: 2,317 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1530NP 6kW fully enclosed compact fiber laser cutting machine The SENFENG SF1530NP 6kW is a fully enclosed, compact fiber laser cutting machine designed for efficient and precise sheet metal processing. With a working area of 1500 × 3000 mm, it is ideal for workshops, job shops, and manufacturing companies looking for a space-saving, safe, and reliable laser cutting solution. The machine is equipped with a 6kW MAX fiber laser source, a RayTools laser cutting head, and a BOCHU CNC laser cutting system. It is suitable for cutting stainless steel, carbon steel, aluminum, brass, and other metal sheets. The compact design, along with the integrated laser source and integrated control cabinet, reduces the required floor space without compromising stable cutting performance. Technical highlights: • Working area: 1500 × 3000 mm • Laser power: 6kW • MAX fiber laser source • RayTools or Precetic laser cutting head • BOCHU CNC laser cutting system • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability accuracy: ±0.02 mm • Maximum speed: up to 100 m/min • Maximum acceleration: 0.8G • Maximum table load: 1100 kg • Machine dimensions: approx. 4921 × 2225 × 2317 mm • Machine weight: approx. 5230 kg • Power supply: 3-phase, 380V / 50Hz • Protection class of power supply: IP54 The fully enclosed design increases operational safety and supports better smoke and dust control. The pull-out work table facilitates loading and unloading as well as the removal of residual material. The automatic gas distribution system enables precise control of nitrogen, oxygen, and compressed air, reducing manual adjustments. Typical applications include sheet metal processing, mechanical engineering, signage, kitchen and stainless steel fabrication, lighting manufacturing, control cabinet construction, automotive parts, and general metal processing. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to enable rapid service support and reduce potential downtime. Lsdpfxezd Dz Re Ammjac The SF1530NP 6kW is a practical solution for customers looking for a compact design, safe operation, reliable cutting quality, and professional local service.

Condition: used, Year of construction: 1998, machine/vehicle number: M-115H- 007-02/15-08, cutting width (max.): 1,150 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: safety light barrier, We offer this used Schneider Senator Schneider Senator 115H - TSC paper cutting machine - Guillotine, year of manufacture 1998. Manufacturer: Schneider Senator Model: Schneider Senator 115H - TSC Year of manufacture: 1998 Condition: used Machine type: paper cutting machine - Guillotine Lajdoymy I Hjpfx Ammoc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, TECHNICAL DETAILS - Part diameter : 100 [mm] - Nominal module * gear hobbing : approx. 3.0 [mm] * endless screw milling : approx. 5.0 [mm] - Max. axial movement : 320 [mm] - Cutting head orientation : -45 / + 115 [°] - Main mill max. diameter : 118 [mm] - Max. cut out length of the mail mill : 180 [mm] - Max. mill movement (Shifting) : 160 [mm] - Max. part-holder spindle speed : 3000 [t/mm] - Min./max. distance between axes : 10/100 [mm] - Cutting head motor power : 14 [kW] - Main mill speed : 50-12000 [t/mm] - Weight : 5000 [kg] EQUIPMENT - CNC Siemens 840D Ljdpfx Amsx Ed A Rsmsac - Cooling tank - Chip conveyor

Condition: new, Year of construction: 2025, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for un-mand production. Effective cutting diameter for round pipes: Ø10 mm – Ø225 mm Effective cutting size for square pipes: □10 mm – □225 mm Laedpfxoktffze Ammoc X/Y/Z axis travel: 270 / 6,900 / 230 mm X/Y/Z axis motor power: 0.75 / 2.9 / 0.75 kW Positioning accuracy: ±0.1 mm Repeatability accuracy: ±0.1 mm Maximum travel speed Y axis: 110 m/min Universal maximum rotation speed: 120 r/min Maximum acceleration: 1.5G Maximum pipe feed length: 6,200 mm Maximum load weight: 300KG Total electrical power of the machine: 22 kva Machine size: 10.400 x 2.180 x 2.400 mm The weight of the machine: 3 ton Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, functionality: fully functional, Year of construction: 2003, Fully functional Laedpfx Aezd Tmismmsc

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, STC-Ref: G-071-2423 Polar 78-ES, Year: 1998 format: 0x780 mm Ljdpfx Aszdu N Ejmmeac equipped with: - safety light beam - photo-cell - rear table guard - datastore for programmes - airtable at left side - airtable at left side - airtable - monitor

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, PRICE REDUCED to 230k!!!! We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Phases: 3 Supply frequency: 50 Hz Total installed power: 21 kVA Interrupting capacity: 25 kA Control voltage 1: 24 V Control voltage 1 type: DC Control voltage 2: 220 V Control voltage 2 frequency: 50 Hz Weight: 10000 kg If you have any questions or need more information, feel free to send us a message or give us a call. Ledpfx Amoyui Ekjmjac

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. Lsdpfxsv T Trus Ammjac A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. Ljdpfxjym Unzo Ammjac This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine from Franz Pytlik Maschinen, Nürnberg. Robust cast iron construction designed for precise cutting of large formats in binderies and printing houses. The machine offers an impressive cutting width of 112 cm, enabling the processing of oversized sheets. The worktable depth is 72 cm. The knife mechanism operates smoothly and effortlessly, while the rear guide, adjustable via handwheel, allows for accurate format positioning. Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Type: manual bookbinding guillotine – Cutting width: 1120 mm – Table depth: 720 mm – Heavy-duty cast iron frame – Cutting lever with wooden handle – Rear guide adjustable by handwheel – Large, stable work surface – Lower shelf for sheets and tools – Knife in good condition (can be resharpened) Technical condition: The machine is complete and fully functional. All mechanisms operate correctly. Normal signs of use – no play and no structural damage. Ideal for use in a bindery, printing house, technical workshop or model making studio. Laedpjy Nmycjfx Ammoc

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutter for sale. Brand: Eba, type 10/550 CNC. Equipped with a hydraulic pressing system, air table, light beam, geared mechanism, and manual operation, 220 volts. This machine comes from a government office and has been used very little. It is in as-new condition. You are welcome to test this machine at our location. We can arrange the transport and packaging for you and load it into a truck or container. Ljdpfxszc I Exe Ammeac Please inquire about a price including transport (location within the Netherlands). Regards, Henk Hoos.

Condition: good (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2540, laser type: CO₂ laser, laser source manufacturer: BYSTRONIC, laser source model: BYLASER 4400, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, power: 52 kW (70.70 HP), input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, overall weight: 12,000 kg, total length: 13,000 mm, total width: 6,000 mm, total height: 2,200 mm, Equipment: documentation/manual, BYSTRONIC BYSTAR 3015 laser cutting machine - including dust extraction system and Donaldson dust collection system, as well as a pallet changer and a BYSTRONIC BYLOADER 3015 loading system - Cutting head Z-axis travel: 170 mm - Max. load capacity of pallet changer: 890 kg - Max. material thickness that can be cut: steel: 0.8 - 25.0 mm, stainless steel: 0.8 - 20 mm, aluminum: 0.8 - 12 mm Note: the machine can be transported on a standard truck! Laedpszdzi Ssfx Ammjc Note: the item must be collected between August 4th and August 13th, 2026, on a date to be confirmed. FCA D-79268 Bötzingen - loaded onto a truck

Condition: used, Year of construction: 2012, Automatic loading table Laedpey Egzxsfx Ammsc Milling unit with 10 spindles, also inclined Swing machine FOM Spring 50 blade 500 mm horizontal Automatic unloading table

Condition: good (used), Oxy-fuel cutting device, with rotary table ideal for cutting weld seams Rotary table diameter 285 mm Maximum cutting diameter 600 mm Lodpfed Dti Iex Ammeac Overall height 1150 mm Width 900 mm Depth 500 mm

Condition: good (used), functionality: fully functional, Year of construction: 2011, Bystronic Bystar 3015 Flatbed Laser CO² + Bytrans Cross 3015 (Sheet Metal Automation) Laser medium: CO2 Laser beam diameter: 20mm Laser power: 4.4 kW Machine dimensions (L/W/H): 9500/6500/3500 (incl. Doldson extraction system) Table length and width: 3000/1500 mm Cutting area -x/-y: 3000/1500 mm Sheet thickness steel: 25 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminium: 12 mm Ljdpfx Aeyztchemmsac Machine operating hours: 106,367 h Laser operating hours (excitation module): 73,725 h Beam on hours: 50,873 h Includes: Depro 6-SPRK extraction system Bylaser 4400 resonator WKL 430 chiller unit Subject to prior sale, modifications, and errors!

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 265020110084, Technical specifications available upon request. Lodpfozd Hfxsx Ammoac

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine Laodpfx Amozd Afzjmjc FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 1,000 mm, total length: 3,650 mm, total height: 1,850 mm, overall weight: 600 kg, 1 Hambi Mattenschneidemaschine TV 25 V, working width 2.50 m, year of manufacture 2000, max. 12 mm single bar or 8 mm double bar, cutting time forward/backward approx. 13/10 sec. Connected load 3 kW. Ledpsvxtc Dofx Ammsac