Used Edge Banding Machine Ima Compact Mfa / F for sale (91,169)

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Predpfx Amszc Agksxeb Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3810x575x1520 mm Weight 1000 kg Total power requirement 8 kw Psdpfx Amsvz E Scjxsrb

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Predscr T N Dspfx Amxsb Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Podjzyy Avopfx Amxorb Equipment and technical data:

Condition: new, 0 0,4 - 3 mm Pedoy Ay Akjpfx Amxjrb Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee. Prodpfjx Enquox Amxjb

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Condition: Completely Overhauled Features and Technical Specifications: - Equipped with a new glue application system - Manually adjustable feed guide - Joining milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Pneumatic pressure unit 1816 Prjdpfx Amozk Nlhexob - Trimming unit 1822 - Milling unit 1942 M: radius, chamfer, flush - Blowing nozzle, complete - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Exhaust hood set - Protective hoods, complete - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge banding thickness depending on configuration: 0.4–5 mm - Max. edge banding height: 55 mm - Edge banding strip length: min. 350 mm - Edge banding overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Exhaust: - Jointing unit: 900 m³/h - Milling unit: 280 m³/h - Rake blade unit: 280 m³/h - Static negative pressure: - Joint milling unit: 1490 Pa - Milling unit: 1650 Pa - Min. air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper unit connection: 70 mm - Compressed air: 6 bar

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x780x1500 mm Weight 800 kg Total power requirement 8 kw Predpfsvz E Evsx Amxsb

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: Machine with PLC control Feed rate: 12/16 m/min Edge feeder for roll and strip material, automatic 1901 Glue application unit, cartridge 1906, with sensing nozzle Pneumatic pressure unit, motorised adjustment to edge thickness 1926 Trimming unit, twin-motor, pneumatically swivelling 1918 Rigid milling unit up to 30 mm, 1962 MOT 5 milling unit with multifunction capabilities: flush, radius, chamfer, 1966 Radius scraper 1927 Corner copying machine 1983 Surface scraper 1964 1944 sanding unit Prjdpfx Amjzk N Hrjxeb Blow moulding nozzles Technical specifications: Workpiece thickness min./max.: 6/60 mm Workpiece width min. 60 mm Minimum workpiece length: 140 mm Maximum gluing thickness: 13 mm Weight: 1,350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: at short notice

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Prjdozrd Nqepfx Amxsb Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Prodpjzrd Rzofx Amxsb Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: CE marking, OTT TWISTER Edge Banding Machine This is a single-sided edge banding machine, operated from the right side, designed for applying and processing edges made of veneer, plastic, and solid wood. Year of manufacture: 2014 1. Technical specifications and dimensions: • Banding thickness: 0.4 – 10 mm. • Part width: minimum 70 mm. • Part height: 8 mm to 60 mm. • Part length: minimum 150 mm. • Continuous speed: 18 m/min. • Working height: 880 mm. • Machine dimensions: height 1,600 mm, width 1,100 mm, length 7,200 mm. • Weight: 3,250 kg. • Operating voltage: 400 Volt, 50 Hz. Predpfjzr Nkgjx Amxeb 2. Key working units: • Pre-milling unit: equipped with 2 motors (2.2 kW, 12,000 rpm) for milling the front surface. • Glue application (Vario-Melt): application roller with dosing automation and modular Combi Melt system for EVA and PUR adhesives. • K13 trimming unit: 2 motors (0.2 kW) for precise edge trimming with a tilting option of 0/5°. • Rough and fine milling unit: for processing edge overhang and radius milling. • AKF copying milling cutter: automated unit for longitudinal and corner processing with a function for veneer and postforming. • Scraping units: includes a radius scraper ZKc (for PVC edges) and a surface scraper ZKf (for removing excess glue). Accessories • PUR package: includes a quick-change head and a hopper. OTT TRANSLIFT Transport System This system is used for automatic handling of parts and returning them to the operator. • Manipulator: single-column, with suction, maximum load capacity 60 kg. • Movements: rotation 0°/90° and transfer to the return belt. • Return conveyor belt: width 900 mm, length corresponds to the machine. • Part limits: maximum length 3,000 mm, maximum width 1,300 mm.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1500x1500 mm Prjdpfxsvz E Tmo Amxeb Weight 1050 kg Total power requirement 8 kw

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Felder Type: G680 Year of manufacture: 2017 Technical data Power supply: 400 V, 3-phase, 50 Hz Power: 7.22 kW Current consumption: 18.6 A CE marking: Yes Equipment: Jointing unit Gluing unit Pressure zone Cutting unit Milling unit Corner rounding unit Scraper blades Pedpfx Amez Arwqoxsrb Polishing unit Additional glue tank Dust extraction connections with flexible hoses Control panel with digital display Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: Prodpfx Aszkmqzjmxsb pre-milling unit, glue application unit, airTec technology, trimming units, milling units, rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Year of construction: 2011, condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Tilting radius milling top + bottom pneumatic adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 12m/min. Predpfx Ajnwkbcsmxsb PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. Pjdpfx Amsy Exwfjxsrb The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: new, Year of construction: 2026, EBM360B Edgebander – Professional Straight and Curved Edge Banding Machine The EBM360B is a professional benchtop edge banding machine designed for precise edging of both straight and curved workpieces. Thanks to its robust construction, reliable operating systems, and automation of key processes, the machine is ideal for medium-sized and large woodworking and furniture manufacturing facilities that require repeatability, efficiency, and high-quality results. Key Advantages Versatile application – suitable for straight and curved workpieces, with edge band widths of 10–60 (68) mm and thicknesses of 0.3–3 mm. Process automation – pneumatic shears for precise edge band cutting, with automatic feeding and material pickup from the magazine. Stable and durable construction – a heavy-duty machine bed and reliable mechanics ensure long-term, trouble-free operation. Efficient bonding – a 2 kW heated glue pot ensures uniform and strong adhesion of the edge band. Ergonomic operation – the control panel is positioned within easy reach of the operator, with intuitive adjustment of operating parameters. High productivity – continuously adjustable feed speed from 0–14 m/min allows the machine to be adapted to different production requirements. Construction and Technology The EBM360B has been designed for demanding industrial working conditions. Machine body – a stable welded construction that minimizes vibration and improves operating accuracy. Heating system – a 2 kW heater provides rapid glue heating and uniform glue application. Drive motors – a set of motors (0.18 kW, 0.37 kW, 0.4 kW) providing independent drives and increasing component durability. Pneumatic shears – ensure clean and precise cutting of the edge band. Pneumatic system – a working pressure of 6 bar ensures stable operation of the feeding and cutting systems. Precision and Productivity With the ability to work with a minimum radius of 20 mm, the EBM360B enables precise edge banding of workpieces with complex geometries. The continuously adjustable feed speed of up to 14 m/min allows productivity to be adapted to the production scale while maintaining high bonding quality. Applications Prjdpfx Amjwl Eaaexsb The machine is designed for professional woodworking and furniture manufacturing facilities where the following are essential: edge banding of straight and curved workpieces, repeatability and precision when processing large quantities of components, high productivity in both batch and one-off production, durable and aesthetically pleasing edge finishing. Standard Equipment 2 kW glue heater, pneumatic edge band cutting shears, automatic edge band feeder, control panel with adjustable operating parameters, stable steel machine bed. Technical Specifications Edge band width 10–50 (58) mm Edge band thickness 0.3–3 mm Minimum working radius 20 mm Maximum cutting width 50 mm Heating power 2 kW Power supply 400 V Motors 0.18 kW / 0.37 kW / 0.4 kW Feed speed 0–14 m/min Air pressure 6 bar Dimensions (L × W × H) 1550 × 800 × 1000 mm Weight 185 kg

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Pedpswhi Slefx Amxjrb Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edgebander LUMINA 1380 Multi PUR & EVA glue application (up to 60mm) + NIR unit / laser edging up to 45mm, as exchangeable station Jointing milling unit IntelliSet - tool correction Prodpex E A Diofx Amxeb fa.s.t. - Set-up on the fly iTronic - pressure & glue quantity control Fully motorized configuration of all units Multi-function milling units - 1.3mm radius (double) & 2mm (double) Spraying units and much more... The machine is currently being refurbished at the factory in Voitsberg, Austria. Delivery, installation, and commissioning can be arranged directly through us at additional cost. The machine is currently located in our distribution warehouse in Gratwein, Austria. In the event of discrepancies between the German and a foreign language version, only the German version is binding. Our Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Biesse Type: Jade 240 Year of manufacture: 2017 Technical data Note: [b]The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.[/i] Pedpfxozuyixe Amxerb

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 60 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40. Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) . Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Prjdpfowxwyfox Amxjb Pressure zone (N.C. adjustment) "A" Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit HL84 (2 x Kw 0,22) 0°-30° Rough Trimming unit (2 x Kw 0,55) Multi-Profile Copying unit by N.C (fine and contour trimming) FK 13 (2 x Kw 0,4) revolver 8+8 Free space Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 OPTIONAL: Milling grooving unit UF11 (1 x Kw 4)

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Prodpelc Ewiofx Amxeb Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: good (used), Year of construction: 2017, I sell the edge banding machine Vitap Eclipse. Edge banding station suitable for curved shaped edges Prjdpfxjzmnx So Amxsb Radius milling station Excellent condition, possible to test !

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V - Brush unit SP-V - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit Predszgwzvjpfx Amxob - Nesting sensors for the machining units The machine is equipped with the following units: – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. – Glue scraper unit, for removing glue residues on the surface. – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707