Used Esta Welding Smoke Suction for sale (8,578)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4862 € 3000 x 1500 mm 3000 kg 755 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 3000 x 1500 x 200 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating Dedeyq Srlspfx Adrocn * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3695 € 2400 x 1200 mm 3000 kg 482 kg 200 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 2400 x 1200 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating Dcodpsyq Sr Ejfx Adrjn * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling Dsdpfx Adowiripsrecn - Substructure with stiffeners OPTION (PRICE ON REQUEST): Diagonal holes

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. Dcedpex Urqdofx Adron For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: new, functionality: fully functional, mileage: 100 km, power: 368 kW (500.34 HP), gearing type: automatic, fuel type: diesel, color: white, axle configuration: 8x4, first registration: 03/2026, Year of construction: 2026, operating hours: 10 h, Equipment: ABS, air conditioning, parking heater, traction control, New vehicle SB 1985 - Available from November 1, 2026 Standard superstructure DINO Vario 12m³ Volvo FH500 8x4-4 NLA MTS suction excavator DINO Vario 12m³ Standard equipment: MTS suction superstructure MTS double fan (patented) MTS material separation system (patented) Automatic filter cleaning Compressed air compressor 4.5m³/min, 8 bar POWERARM articulated arm with 7m suction hose 3 stabilizing supports PLC control with remote diagnostics Remote control Set of demolition and air release tools Documentation TÜV inspection Optional accessories: Container with stainless steel lining MEGAARM articulated arm Dcsdpjz Anrwefx Adrsn Rotating suction pipe system IKE/PERFOR Suction & drive & steer HYDROSTAT Full fairing DESIGN High-pressure water system 30 l/min, 160 bar, 500 l tank Full fairing DESIGN Electric steering Storage box made of stainless steel (max. 1,200mm wide) Step ladder, 3 steps, under the hose rack Step ladder, 3 steps (on both sides of the machine housing) Special - Industrial equipment: Infinitely variable speed control for special models HBC radio remote control with display (2x radio with cable function) Special accessories - Lighting: Light package I: 3 LED lights on the vehicle frame Light package II: 2 LED lights on the center joint of the articulated arm Light package III: LED light strips in the tool box Light package V: LED lights next to the articulated arm shaft Light package VIII: Light bar on the cover (rear) The general terms and conditions of MTS GmbH apply, available at: saugbagger.com/allgemeine-geschaeftsbedingungen New vehicle Errors and prior sale are subject to change. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: good (used), mileage: 565,000 km, power: 250 kW (339.91 HP), first registration: 06/1997, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, gearing type: mechanical, suspension: steel-air, total length: 8,200 mm, total width: 2,500 mm, total height: 3,750 mm, loading space volume: 16 m³, Year of construction: 1997, Equipment: air conditioning, differential lock, electric window regulation, power assisted steering, = Additional Options and Accessories = - Aluminum fuel tank - Air suspension - Air-suspended seats - Air horn - Radio/CD player Dcedpfozzz Trex Adrjn - Rotating beacon - Sun visor - Toolbox = Additional Information = Front axle: Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Leaf spring Rear axle 1: Twin tires; Differential lock; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: Air suspension Rear axle 2: Lift axle; Steering; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: Air suspension Number of cylinders: 6 Gross vehicle weight: 26,000 kg Technical condition: good Optical condition: good Please contact Andre, Henri, or Andre for further information.

Condition: used, Year of construction: 2007, 2007 | DAF CF 84.460 RSP | Used Suction Excavator | 232536 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 39900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 31 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the suction excavator. Quite significant tire wear. Presence of oxidation on the bucket and turbine. All functionalities are working. Ability to cut off the air valve on the rear left of the vehicle. Damage to the rack dampening the access door on the right side. Absence of the GNR tank cap. Presence of two remote controls. Absence of the AD Blue tank cap. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40180 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Dodpfx Adeyi Enwerocn

Condition: used, length 800 mm height 650 mm total power requirement 3,7 kW weight of the machine ca. 75 kg dimensions of the machine ca. 800 x 330 x 650 mm Technical Specifications Continuously adjustable range [A] 35â??270 Duty cycle (DC) at Imax. (10 min) [%] 30 (40) Welding current at 100% duty cycle [A] 160 Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 5.5 Protection class IP 21 Dcjdpez Auivofx Adrjn Included accessories: - Hose set - Pressure regulator - Ground cable - Basket coil adapter

Condition: used, mileage: 171,938 km, power: 115 kW (156.36 HP), color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, power assisted steering, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (available by phone at ). Aebi Schmidt MT750 sewage truck (suction and pressure truck) Superstructure: Reinex SSA 3000-0112-18, volume: 3 m³, electric windows, air conditioning, reversing camera system, air suspension seat, radio, ABS/ESP/ASR, differential lock, auxiliary drive, gearbox reduction, halogen headlights, auxiliary headlights: vehicle rear, left, right, rotating beacons, hydraulic system, ball hitch, tire tread: 1st axle 5-7 mm, 2nd axle 12-13 mm, unladen weight: 4,585 kg, permissible total weight: 7,500 kg, payload: 2,915 kg. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale reserved!!! ESP, particulate filter Dcjdpfx Adsz And Horon = Further information = Engine displacement: 4,456 cc GVWR: 7,500 kg Contact Tobias Ebert for more information.

Condition: excellent (used), Here, we offer you a Ytterbium fiber laser. The LSS5 M laser welding tongs complement the product series as a compact welding tool. With laser powers ranging from one to four kilowatts, integrated cooling technology, and a user-friendly control unit, this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet metal pairings, or aluminum. Trifocal technology 3500W laser tongs Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 – 600 Power requirement 3500 W laser power Laser duty cycle 30% (with cooler) 3.5 kW Dimensions, controller W × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F 400-460V AC 3P/PE Djdpezd Rinofx Adrscn 50/60Hz 32A/120k Type: Laser welding tongs LSS-5M-3500-3F Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have by phone.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Dsdpfxozd Rmgj Adrscn Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2001, operating hours: 12,790 h, Easy-to-use welding cell equipped with an ABB IRB140 robot and an S4C+ M2000 control system, as well as Fronius TPS welding equipment. A convenient solution for smaller welding projects, with a design that makes it easy to position and move as needed. Only a pallet truck is required to move it. The cell has primarily been used for trial welding and demonstrations. Specifications: - ABB IRB140 - ABB S4C+ M2000 control system Djdjz Apzyopfx Adrecn - Fronius TPS welding equipment - Compact design - Suitable for smaller welding projects - Used for trial welding and demonstrations - Easily moved with a pallet truck

Condition: used, mileage: 35,000 km, power: 161 kW (218.90 HP), first registration: 11/2001, fuel type: diesel, tire size: 295/80 R 22.5, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 2001, = Additional options and accessories = - 4x2 - Leaf spring suspension - Mechanical tachograph - Power take-off (PTO) Dcodpfx Aoz Dkmwodron = Further information = Tire size: 295/80 R 22.5 Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle: Dual tires; Tire tread depth left (inner): 70%; Tire tread depth left (outer): 70%; Tire tread depth right (inner): 70%; Tire tread depth right (outer): 70%; Reduction: single reduction Damage: none

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Originates from a cleanroom manufacturing process, plastic granules. Industrial vacuum cleaner for compressible material. The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. • Reduces downtime through continuous cleaning • Compression and easy removal of the collected material • Dust removal from the work environment • Recycling of trimmings • Flexible due to different performance classes Dcjdpfxow D Upzo Adren • Container sizes, maintenance-free • Simple monitoring • Unattended operation possible. Nilfisk industrial vacuum cleaner R104 V 4031600000 Article number: NILFISK-4031600000 R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Industrial vacuum cleaner for compressible material The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop.

Condition: new, Year of construction: 2026, Equipment: documentation/manual, foot remote control, Indexing table, 1500 x 3000 x 200 mm Tabletop thickness: 22 mm, hole diameter: 28 mm with wireless handheld remote control Swivel range: 360° Height adjustment: hydraulic, motor range 800 to 1200 mm Speed: 0.5 RPM Dcjdpfx Adsz D Af Sjron Motor power: 0.75 kW We offer the tables in various sizes and load capacities: Load capacity: 500 kg, dimensions: 1000 mm x 1500 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 1000 kg, dimensions: 1000 mm x 2000 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 1500 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 2000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 3000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 5000 kg, dimensions: 1500 mm x 3000 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment

Condition: used, Technical details: filter cartridge type: mechanisch air flow rate: 1.330 m³/h total power requirement: 40 kW weight of the machine approx.: ca. 300 kg Mobile extraction system with wet separator - Industrial extraction system Use for combustible dusts (for aluminum and magnesium dusts); EX protected Construction: sheet steel housing Dust cartridge dust class M 10 m² and dust class H 10 m² Dust extractor: -size Ø 580 x 1,000mm -Pipe connection Ø 160 x 60mm -mechanical filter Dust container: -size Ø 580 x 550mm -with 4 wheels Ø 100x36mm) swiveling Water separator: -with 2" drain valve with hand lever -max. capacity 75 liter Dodpfx Aeu Nv A Eodrscn *

Condition: used, Technical details: power consumption: 20 - 300 A welding current: U1 = 380 V Dodou Nwgrjpfx Adrocn connected load: 14 kVA weight of the machine approx.: 171 kg dimensions of machine: 0,9, x 0,5 x 0,92 m Transformer - Welding machine - Welding transformer Control: 14 levels for thin sheet metal and 14 levels for thick sheet metal air-cooled Protection class P 21 with electric welding gun with cable approx. 6.0 meters Ground clamp and earth cable approx. 4.0 meters *

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) Dedpfx Aou U Iixjdrjcn TIG (steel/VA) and manual electric welding Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters *

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Each chamber has a capacity of 10 trolleys Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dcsdpfxey Ua Rxe Adren Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators. Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three powerful steam-smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys), which ensures optimal air and smoke circulation, and thus a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam installation operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, shortening the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, load capacity: 800 kg, - Stationary scissor lift table with single scissors - Steel perforated grid plate System 16 - Platform size: 2000x1000x100 mm - Hole spacing: 50 mm - Hole diameter: 16 mm - 360-degree rotary platform beneath the grid plate Djdsxazzyspfx Adrscn - Grid system with 4 stops every 90 degrees - Lift up/down operated by a hand control with 3 m cable - Battery-hydraulic drive - Load capacity: 700 kg - Construction height: 670 +/- 60 mm - Useful lift: 700 mm - Maximum height: 1370 +/- 60 mm - Own weight: approx. 810 kg - Stationary version with 4 base plates.

Condition: excellent (used), Year of construction: 2021, Table Ø: 1000mm Table load on 200 mm:600 Table load on 400 mm:400 Table load on 600 mm:280 Table load on 1000 mm:200 Djdpfx Adjwvrbforjcn Rotation table: 360.000° Length: 1200mm Width: 1200mm Height: 1400mm Weight: 1200kg

Condition: excellent (used), Suction & Filtration Trolley Manufacturer: Anton Metzger Model: MKR 400 S Capacity: 400 liters Technical data, see photo Documentation available Dcjdpfxjw Avzpe Adren Length: 2650 mm Width: 800 mm Height: 1440 mm Weight: 610 kg

Condition: excellent (used), Vacuum slot channel / suction channel Manufacturer: Blaschke Dsdpfx Adjzf Aqmjrocn Length: 18 meters = 59 feet 0.661 inches, 3 x 6 meter aluminum profiles Cross-section: 180 x 180 mm Including 3 vacuum carriages and fan 3 kW 380 volts Various bends and pipe sections

Condition: new, Welding electrodes 68 HH UTP, 4 mm diameter, 365 mm long Djdpoyml Ufjfx Adrjcn

Condition: like new (used), Year of construction: 2023, functionality: fully functional, EWM Phoenix 452 Puls Multimatrix Mig Mag welding machine Year of manufacture: 2023. Dodpfx Adetkuvxjrscn unused still in original packaging.