Used Falken // Erbend Ufa 1015 for sale (531)

Condition: new, Description The wide F2-200 mowing units have a lateral displacement of 40 cm (-10 cm to +30 cm from the mowing unit axis) and are equipped with a suspension system that is compatible with tractors in Category II. The robust housing ensures high stability and durability. The mowing units have a single-sided drive system with belt transmission for 5 XPB belts, which is protected by safety devices. The gearbox transmits a power output of 60 to 120 hp. The recommended PTO speed is 540 rpm, which results in a cutting rotor speed of 2380 rpm. The cutting height can be adjusted with guide skids, and the discharge hood is adjustable in four positions. The travel speed should be adapted to the terrain and should not exceed 10 km/h. The rotors of the F2 series mowing units are electronically balanced and have replaceable pin bolts. These are mounted on robust oscillating roller bearings with seals and covers, which are housed in steel housings. Technical data Min./Recommended power 60/120 hp Recommended PTO speed 540 rpm Mounting system Three-point linkage Mowing width 200 cm Flail mower dimensions 2164 x 1010 x 1015 mm Flails Knodpfs Abnuajx Ahisc 20 pcs. Gearbox One-way clutch Rear roller 168 mm Shaft diameter with flails 420 mm Lateral displacement 40 cm Weight 700 kg

Condition: new, Description The wide F2-175 mowers have a lateral displacement of 40 cm (-10 cm, +30 cm from the center of the mower) and can be mounted on tractors with a Category II suspension system. They are robustly constructed, which ensures high stability and durability. The drive system uses 5 XPB belts and is protected by safety devices. The gearbox transmits a power of 60 to 120 hp, and the recommended PTO speed is 540 rpm, resulting in a cutting blade speed of 2380 rpm. The cutting height can be adjusted with guide shoes, and the discharge hood is adjustable in four positions. The travel speed should be adapted to the terrain and must not exceed 10 km/h. The mowers of the F2 series have rotors that are electronically balanced and have interchangeable pin bearings. These rotors are mounted on robust oscillating roller bearings with seals and covers, which are housed in steel housings. Technical data Min./Recommended power 60/120 hp Recommended PTO speed 540 rpm Mounting system Three-point linkage Cutting width 175 cm Flail mower dimensions 1914 x 1010 x 1015 mm Flails 16 pcs. Gearbox One-way clutch Rear roller 168 mm Shaft diameter with flails 420 mm Kjdpfs Abnd Iox Ahisnc Lateral displacement 40 cm Weight 650 kg

Year of construction: 2011, condition: ready for operation (used), A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible. Knsdpfxewrhwze Ahioc

Condition: used, A package of six injection moulds for the series production of office organization products is available. The molds can be used to manufacture nestable filing trays, PET filing trays A4-C4, high-gloss and matte PS filing trays, a frame for a 3-tier filing tray unit, and a PET desk organizer. Materials processed: PET, recycled PET and PS. Mold numbers: W23630, W23635, W61014F2, W61015F5, W61019 and W62539. Mold dimensions depending on the mold: 397-570mm × 396-820mm × 369-637mm. Mold weights where documented: 450-1450kg. Average cycle times: 24.4-43.2s. Machine classes previously used where documented: 250t, 275t and 380t. According to the available documentation, the molds are in good condition. W61019 is used exclusively to manufacture the frame for the 3-tier filing tray unit. The molds are sold as a complete package. An on-site inspection of the molds is possible by arrangement. Knsdpfozyq S Usx Ahisc

Condition: new, neu 050233 Knodpewirciofx Ahisc Jänner 2027, Zwischenverk Taiwan 87870 € 1660.74 € 1015 mm 600 mm 1000 x 400 mm 1000 x 400 mm 670 kg 1100 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2.000 1/min 5,5 kW 1.5 kW 1.1 kW 1.1 kW 3630 mm 2682 mm 2200 mm 4400 x 2300 x 2400 mm 4800 kg 423 kg 670 kg 355 x 50 x 127 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working area 1 grinding wheel 2 grinding wheel flanges grinding wheel balancing stand balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Year of construction: 2025, condition: new, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit, a flow wrap unit and a unit for applying the reclosable lid. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing and feeding to the lidding unit. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; lid dimensions: Width max. 80mm, length max. 120mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L16273xW5404xH2350 mm; total weight: about 12000kg; power: 27kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the packaging and lid closing unit on request. Knjdsv Nma Dspfx Ahiec Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Knjdpfsxrpm Uox Ahiec Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Condition: good (used), Year of construction: 1994, Window processing line, CNC window manufacturing plant, window angle machine, clamping device, pneumatic clamp -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 120 mm -Clamping cylinder: airtec HM-25-120 Knodeyibx Ajpfx Ahioc -Number: 2x clamping device available -Price: per piece -Dimensions: 560/225/H80 mm -Weight: 5 kg/pc.

Condition: used, This listing is for a refurbished Laboklav 135M Autoclave 2018 Refurbished by the manufacturer Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 135l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 840 x 965 x 700 Kodpsxx Aqmsfx Ahienc Chamber dimensions (Ø x d in mm) 500 x 660 Steam generator 10kW Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Knedpfsyl S Eujx Ahioc

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, Very well-maintained double-pressure press DM2 by Heuer Hammer. Immediately ready for use. Kjdpfsxywkwox Ahijnc

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, Very well-preserved double-pressure press DM3 from Heuer Hammer. Immediately ready for use. Kedpfxexywlns Ahionc

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Reversible left/right rotation, brake Haffner 3-roller power feed, 4 feed speeds, Kedpfx Ahsv Im Sweisnc Feed rollers new, Good condition – machine has been inspected Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 77000 € 1455.3 € 460 mm 445 mm 460 x 200 mm 450 x 200 mm 0,1 - 25 m/min 0 - 3000 mm/min 0,001 mm 220 mm 340 mm 0 - 3000 mm/min 0.001 mm 1000 - 7000 1/min 3 kW 0.7 kW 1.1 kW 1.1 kW 2510 mm 2515 mm 2010 mm 1550 kg 1015 mm 175 kg 210 kg Dm. 205 x 12,7 x 31,75 mm 0,004 mm 0,003 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel, with graphical dialog programming Infinitely variable speed Kedpjwiqvbsfx Ahijnc Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with Turcite-B coating Transverse and vertical feed with precision ball screws (class C2) and AC servo motors Longitudinal feed hydraulically Fully enclosed splash guard with lamp Electromagnetic chuck plate Coolant system with automatic paper filter and magnetic separator autom. dressing attachment table mounted with compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing stand Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH * The exact configuration of the dresser must be clarified before ordering

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request. Knedpfx Aoxw Tumehioc

Condition: new, functionality: fully functional, Year of construction: 2015, machine/vehicle number: Masa HDP-800, Silicate brick production equipment Masa GmbH HDP-800 Knsdpfx Ahsx Aza Usioc

Condition: like new (used), overall weight: 200 kg, Year of construction: 2022, STEEL PRODUCTION TABLE TOPS, DIMENSIONS 1400X1200X15, CONDITION: GOOD. THE LISTED PRICE IS PER PIECE. AVAILABLE QUANTITY: 2750 PCS. Knsdpfox Ncdqox Ahisc

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Kedpfx Ahjyzc Rujienc

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 152-026710, overall weight: 3,000 kg, total height: 5,593 mm, total width: 1,340 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), main lifting speed: 4,000 mm/min, fine lifting speed: 12 mm/s, throat depth: 4,000 mm, working height: 4,500 mm, operating hours: 20 h, Equipment: documentation/manual, 5 t pillar-mounted slewing crane with electric hoist and electric slewing drive Manufacturer: ABUS Kransysteme GmbH Type: VS 660 pillar-mounted slewing crane with electric chain hoist / wire rope hoist GM 1000.5000 H-162.41.6000.6.E130.20 Year of manufacture: 2023 Serial No.: Crane: 152-026710 Trolley: 250-123870 For sale is a like-new pillar-mounted slewing crane with a lifting capacity of 5,000 kg and a reach of 4,000 mm. The system was put into operation at the end of 2023 and has only been used very little. According to the available remaining useful life calculation, only 20 operating hours have been recorded up to April 2025, resulting in a remaining reserve of approximately 1,598 hours or a projected remaining useful life of over 30 years. The crane features an electric slewing drive, an electric trolley, and a two-stage hoist. Operation is conveniently performed via a pendant control. The system is equipped with a load indicator system (LIS-SV), upper and lower hoist limit switches, and the associated inspection and conformity documents. Scope of supply: Kedpfxezd Sqas Ahisnc * Complete pillar-mounted slewing crane * Electric slewing drive * ABUS trolley * ABUS wire rope hoist * Load hook 5 t * Crane inspection book * Declaration of Conformity * Remaining useful life calculation * Existing technical documentation Condition: Used, very good condition, low operating hours, regular inspection records available. System is visually and technically well-maintained. Photo of the assembled system is available. Location: Dresden Loading: Loading onto a suitable transport vehicle is included in the purchase price. Inspection: An inspection of the system is expressly desired and possible by appointment. Technical documents and further images can be provided upon request. Subject to prior sale and errors. * Lifting capacity: 5,000 kg * Reach: 4,000 mm * Crane type: VS 660 * Pillar diameter: 660 mm * Underside of boom: 4,983 mm * Hook travel: 6,000 mm * Crane classification: H2 / B3 * Hoist motor group: 2m / M5 * Operating mode: Indoor operation * Slewing drive: electric, two-stage * Slewing speed: 0.15 / 0.60 rpm * Hoisting speed: 0.7 / 4 m/min * Trolley travel speed: 5 / 20 m/min * Operating voltage: 400 V / 230 V, 50 Hz * Total connected load: 4.63 kW * Total current consumption: 12.07 A * Load indicator system: LIS-SV * Hook: Single hook DIN 15401, 5 t * Weight of boom: approx. 869 kg * Weight of pillar: approx. 872 kg * Weight of trolley: approx. 356 kg * Total weight of system: approx. 2,100 kg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2.7552.069, wire diameter (max.): 6 mm, power of the servo motor: 10,000 W, input voltage: 400 V, type of input current: three-phase, We are offering this very well-maintained Wafios BM 3 wire bending machine, manufactured in 1998, for sale. Tool set for 3 - 6 mm wire is included. Complete documentation is available. The PC has already been replaced. We mainly produced 3D parts from 3 mm wire – brochure holders in all variations. Everyone knows what happens when you maintain the speed after the third bend... distortion. Therefore, this machine operated at a maximum speed of 15%. Knodpfozvdd Aex Ahiec If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, EMCO E65 TCM CNC turning machine Technical specifications •Manufacturer: EMCO •Model: E65 •Year of manufacture: 2006 •Machine number: R6EU1351 •Control system: Fanuc 0i •Bar diameter: Ø 65 mm Knjdpfx Ahszvpqheiec •Axes: X / Z / C – 210 / 610 mm / 360° •Tool turret: 12 driven tool stations •Tool holder: VDI 30 Equipment •Bar loader •Chip conveyor •12 driven tool stations •VDI 30 interface Software options •Manual Guide i •Polar interpolation •Cylindrical interpolation •Helical milling

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, Complete concrete block production line Manufacturer: Schlosser Control system completely renewed in 2019 Production of paving stones, grass pavers, etc. Drying unit Ksdjy Sin Uspfx Ahienc Palletizing system

Condition: used, Year of construction: 2009, operating hours: 67,500 h, functionality: fully functional, machine/vehicle number: 2.7681.023, For sale: WAFIOS BMZ 42 CNC tube bending machine, year 2009. We are offering a CNC tube bending machine from the premium manufacturer WAFIOS, model BMZ 42. The machine has been used in production and is suitable for the precise, serial production of bent wire and tube components. Technical data: manufacturer WAFIOS, type BMZ 42, year of construction 2009, serial number 2.7681.023, operating hours approximately 67,500 h, location: Northern Italy, province of Bolzano. The machine has a robust construction and is currently still in operation and used for complex tube applications in the automotive industry. The machine is sold complete with protective casing. Used condition, machine in production, further details on condition and accessories available upon request. Machine supplied as inspected, including available documentation. Inspection possible by appointment, loading assistance provided. If interested, please contact us. Price negotiable. Knjdpfx Aszb U Tgohijc

Condition: new, functionality: fully functional, operating pressure: 195 bar, empty load weight: 222 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KRANZLE THERM 895-1 TECHNICAL DATA: Model: KRANZLE THERM 895-1 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 895 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 155 Operating pressure (bar): 195 Maximum pressure (bar): 215 Connection power (kW): 6.4 Power cable length (m): 7.5 Weight with accessories (kg): 214 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1015 Kedjy R U D Sopfx Ahionc KRANZLE THERM 895-1 EQUIPMENT: KRANZLE [123272] pressure gun (M22 / quick coupler) Spray lance: KRANZLE [12420] (quick coupler) 25° flat jet power nozzle [D2507]. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m Professional-Class Pressure Hose WHY CHOOSE THE KRANZLE THERM 895-1? The THERM 895-1 is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 895-1 model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's lifespan. A large water filter protects the pump from contaminants that may be present in the water. A high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle are standard. The device also features a D12 quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 895-1 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: used, Year of construction: 2012, The SAC F4TL window manufacturing centre is designed to meet the requirements of modern window production. It enables highly efficient, high-quality manufacturing with minimal setup time and without the need for tool changes. After machining, the workpiece is automatically returned to the operator. SAC F4TL CNC Window Manufacturing Centre – Machining Units Tenoning Side 1. Tenoning carriage 2. End trimming unit 3. Tenoning spindle Profiling Side 4. First profiling spindle 5. Second profiling spindle Knedpfozl D Dnjx Ahisc 6. Glazing bead notching unit 7. Hardware slot milling unit (optional) Feed System Tenoning Side 1. Tenoning carriage • Machining speed: 3–10 m/min • Return speed: 45 m/min • Table size: 290–955 mm • Motor power: 1.1 kW • Fence tilting angle: ±60° 2. End trimming unit • Saw blade diameter: 400 mm • Bore diameter: 30 mm • Motor power: 3 kW 3. Tenoning spindle • Vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 620 mm • Vertical travel: 565 mm • Motor power: 7.5 kW • Maximum tool diameter: 350 mm Profiling Side 4. First Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: left/right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 5. Second Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 6. Glazing Bead Notching Unit • Saw blade diameter: 200 mm • Saw blade bore: 30 mm • Horizontal spindle adjustment: 60 mm • Motor power: 2.2 kW Optional Unit 7. Hardware Slot Milling Unit • Motor power: 3 kW • Spindle diameter: 30 mm • Spindle length: 100 mm • Horizontal spindle adjustment: 60 mm • Vertical spindle adjustment: 60 mm • CNC-controlled with 2 vertical positions (maximum difference: 60 mm) • Maximum tool diameter: 190 mm Feed System • Feed speed: 4–20 m/min • Pneumatic workpiece clamping CNC Control and Software • 17" colour LCD monitor • 102-key alphanumeric keyboard • Operating system: Windows XP Professional Options • Hardware slot milling unit • Motorized NC-controlled stop • Return roller conveyor • Leitz IV 69 tool set • Leitz IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.