Used Flat Grinder Ltf With Magnet for sale (7,630)

Condition: good (used), Seydelmann GW 300 Frozen Meat Grinder Thanks to their robust construction and their extremely strong power of motor, Seydelmann Frozen Meat Grinders guarantee a perfect cutting image even when grinding whole frozen meat blocks down to -25 °C (-13 °F). A very high hourly output and a very uniform grain size is achieved with any material. Seydelmann Frozen Meat Grinders can be integrated ideally into production lines. The machine frame is made of stainless steel and completely closed so that all pipes, motors and other parts are integrated into the machine. All edges are rounded and all surfaces on the machine are polished very precisely and designed with a slope so that cleaning water will drain completely from all surfaces. Thanks to embedded covers and the closed bottom of the machine frame water cannot enter the machine and pollution is prevented. The first stage of the size reduction process takes place in the hopper with the worm of the Frozen Meat Grinder. With its extended profile and relief grinding windings, the worm cuts off approximately 8 cm (3.2 in) of the frozen meat block with every rotation, and carries the meat to the cutting set for grinding. The GW 300 is equipped with a two-speed drive. The first speed is for deep-frozen blocks of meat or when using hole plates with small holes and the second speed is suitable for reduction with hole plates with bigger holes. Nledjy Dquyepfx Ag Dea Manufacturer: Seydelmann Model: GW 300 Hole plate diameter: 300 mm Capacity: Up to 10.000 kg/h Power of motor: 78/105 kW Power of AC-6 motor: 140 kW Hopper capacity: 450 Liters Machine dimensions LxWxH: 2.700x1.500x2.400 mm Conveyor dimensions LxWxH: 2.500x900x2.100 mm Total weight: 3.300 kg.

Condition: used, Year of construction: 2007, operating hours: 14,100 h, Equipment: ABS, Scania G LTF 1045 14010 h OW 122,000 km / UW 35-meter mast very good RUST-FREE condition second owner no pending repairs Nlsder Icl Dopfx Ag Doa major service in 12/2023 OW inspection 23.05.2024 all inspections can be newly performed at handover Wire rope from 2024 everything dry OW air conditioning UW air conditioning UW bed Tires 85% brakes new / clutch new / in use with us Photos are from 2024 Errors or typographical mistakes excepted.

Condition: used, mileage: 122,000 km, power: 297 kW (403.81 HP), first registration: 10/2007, fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, brakes: retarder, color: yellow, gearing type: mechanical, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, Scania G LTF 1045 14010/h OW 122000 km / UW 35 meter mast very good rust-free condition second hand no backlog of repairs major inspection in 12/2023 OW inspection 05/23/2024 all inspections can be redone for handover rope from 2024 everything dry OW air conditioning UW air conditioning UW bed tires 85% new brakes / new clutch / in use with us pictures are from 2024 Nsdpfx Ajr Icl Ssg Djla mistakes or misprints cannot be ruled out

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 180,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 180,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Nsdpfx Ajwdmy Seg Dela Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Condition: used, mileage: 446,764 km, power: 294 kW (399.73 HP), first registration: 02/2019, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, disability-friendly, = Additional Options and Accessories = - DVD - Retarder - Wheelchair lift - USB connections - USB connections - Webasto heater = Further Information = Damage: none = Company Information = We are an international company based in Belgium, located approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for buying and selling used buses and features an extensive lot that serves as our showroom. We always keep a wide range of buses from all brands, capacities, models, and price categories in stock. We can help you find the right coach, school bus, or city bus tailored to your needs and budget. All information provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing hours for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Nedpfey Dvhxex Ag Dsla Mowimy po Polsku (Agata). We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish and more.

Condition: excellent (used), mileage: 659,000 km, power: 315 kW (428.28 HP), first registration: 05/2003, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,190 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: retarder, color: orange, driver cabin: day cab, gearing type: semi-automatic, number of gears: 16, emission class: euro3, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 16 m³, Year of construction: 2003, Equipment: ABS, air conditioning, cruise control, differential lock, electric window regulation, power mirror, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - 8,000 kg Front Axle - 430 Liter Diesel Tank - Aluminum Fuel Tank - Heated Mirrors - Comfort Driver's Seat - Differential Lock - Differential Lock - EPS with Clutch - High Beam - Speed Limiter - Battery Master Switch - Hydraulic System - Lift Axle - Radio/CD Player - Beacon Lights - Sun Visor - Toolbox - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF Intarder - Towing Hitch = Notes = GOOD CONDITION MERCEDES-BENZ ACTROS 2543L V6 6x2 CHASSIS WITH MULLER F155 EGH VACUUM TANK & RETARDER!! 430HP, V6 ENGINE!! EPS WITH CLUTCH (3 PEDALS)!! RETARDER!! ADR/VLG (FL - AT)!! LIFT AXLE!! P.T.O.!! ETC.!! MULLER F155 EGH VACUUM TANK!! HYDRAULIC SNAKE ARM!! HIGH PRESSURE WATER PUMP!! ETC.!! TRUCK IS IN GOOD WORKING AND DRIVING CONDITION, READY FOR THE JOB!! MORE MERCEDES-BENZ 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS AVAILABLE IN STOCK!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of Cylinders: 6 Engine Displacement: 11,946 cc Transmission Transmission: EPS WITH CLUTCH (3 PEDALS), 16-speed, Semi-automatic Transmission Axle Configuration Brakes: Disc Brakes Front Axle: Tire Size: 385/65R22.5; Max. Axle Load: 8,000 kg; Steering; Left Tire Tread: 50%; Right Tire Tread: 50%; Suspension: Leaf Spring Rear Axle 1: Tire Size: 315/80R22.5; Twin Tires; Differential Lock; Max. Axle Load: 11,500 kg; Inner Left Tire Tread: 20%; Outer Left Tire Tread: 20%; Inner Right Tire Tread: 20%; Outer Right Tire Tread: 20%; Reduction: Single Reduction; Suspension: Air Suspension Rear Axle 2: Tire Size: 315/80R22.5; Lift Axle; Max. Axle Load: 7,500 kg; Left Tire Tread: 30%; Right Tire Tread: 30%; Suspension: Air Suspension Nlsdoytxu Sopfx Ag Doa Weights Unladen Weight: 16,540 kg Payload: 9,460 kg gross Vehicle Weight: 26,000 kg Functional Body Make: MULLER F155 EGH VACUUM TANK Condition Technical Condition: Very Good Visual Condition: Very Good Further Information Please contact Sales Department or Erik Engel for further details.

Condition: excellent (used), mileage: 128,632 km, power: 165 kW (224.34 HP), first registration: 06/1988, fuel type: diesel, tire size: 13R22,5, axle configuration: 4x4, fuel: diesel, color: orange, gearing type: mechanical, number of gears: 6, emission class: euro2, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 5,050 mm, loading space width: 2,500 mm, Year of construction: 1985, Equipment: crane, differential lock, seat heater, = Additional Options and Accessories = - All-wheel drive - Heated mirrors - Passenger bench seat - Leaf suspension - Comfort driver's seat - Differential lock - Differential lock - Speed limiter - Hydraulic system - Hub reduction - Radio/CD player - Sun visor - Toolbox - PTO (Power Take-Off) - PTO (Power Take-Off) = Remarks = PERFECT CONDITION MERCEDES-BENZ 1622AK (V6) 4x4 FULL STEEL SUSPENSION CHASSIS WITH HMF 1003K2 CRANE, MANUAL GEARBOX & REDUCTION AXLE!! 220HP, V6 ENGINE!! ZF6 GEARS MANUAL GEARBOX!! FULL STEEL SUSPENSION!! REDUCTION AXLE!! P.T.O.!! SUN VISOR!! 3RD SEAT!! ETC.!! HMF 1003K2 CRANE MOUNTED ON REAR OF CHASSIS (2 HYDRAULIC EXTENSIONS)!! 4x STORAGE BOXES!! RACK FOR OVERSIZE LENGTH ABOVE CAB!! TRUCK IS IN CLEAN & GOOD WORKING AND DRIVING CONDITION, READY FOR (ELECTRICAL) JOBS!! MORE MERCEDES-BENZ 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A “ONE STOP SHOP” COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ENGEL TRUCKS; “YOUR GLOBAL TRADING PARTNER” = Further Information = Transmission Transmission: ZF 6-speed manual gearbox, 6 gears, manual transmission Axle configuration Brakes: Drum brakes Suspension: Leaf suspension Nodpfxeyrhgbo Ag Djla Front axle: Tire size: 13R22.5; Differential lock; Max. axle load: 7,500 kg; Steered; Tire tread left: 90%; Tire tread right: 90%; Reduction: single reduction Rear axle: Tire size: 445/65R22.5; Differential lock; Max. axle load: 11,500 kg; Tire tread left: 90%; Tire tread right: 90%; Reduction: outboard planetary axles Weights Unladen weight: 10,700 kg Payload: 8,300 kg Gross vehicle weight: 19,000 kg Functional Mast: Telescopic Lifting capacity: 10,000 kg Superstructure brand: HMF 1003K2 CRANE Condition Technical condition: very good Visual condition: very good Further information Please contact Sales Department or Erik Engel for further information.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0000025, center height: 315,425 mm, workpiece weight (max.): 3,000 kg, grinding length: 3,000 mm, grinding wheel diameter: 750 mm, total width: 2,700 mm, total length: 11,000 mm, total height: 2,200 mm, grinding diameter: 630,850 mm, workpiece weight between centers: 3,000 g, distance between centers: 3,000 mm, grinding wheel width: 100 mm, feed length Z-axis: 3,300 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 250 rpm, warranty duration: 24 months, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 250 rpm, Equipment: rotational speed infinitely variable, Cylindrical grinding machine BUC63/3000 CNC new in 100% condition with Sinumerik ONE control system, or INTRONIX TOS CNC. Nledpju U Ewgofx Ag Dea It is possible to expand with additional equipment for superfinishing SUPFINA, or for grooving equipment for rubber or plastic rollers.

Condition: excellent (used), mileage: 218,666 km, power: 206 kW (280.08 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2010, Equipment: cruise control, = Additional Options and Accessories = - Aluminium fuel tank - Leather interior - Leather upholstery - Air suspension - Air-suspended seats - Power Take-Off (PTO) = Further Information = General Information Year of manufacture: 2010 Axle Configuration Front axle: Steered; Tyre tread left: 60%; Tyre tread right: 60%; Brakes: Disc brakes; Suspension: Leaf suspension Rear axle 1: Twin tyres; Tyre tread inside left: 40%; Tyre tread outside left: 60%; Tyre tread inside right: 40%; Tyre tread outside right: 60%; Brakes: Disc brakes; Suspension: Air suspension Rear axle 2: Lift axle; Steered; Tyre tread left: 40%; Tyre tread right: 40% Weights Unladen weight: 15,460 kg Payload: 12,640 kg Gross vehicle weight (GVW): 28,000 kg Interior Upholstery: Leather Nledpfx Aey Drr Heg Dja Condition Technical condition: Very good Optical condition: Very good

Condition: good (used), total width: 3,500 mm, total length: 19,000 mm, total height: 2,100 mm, workpiece weight (max.): 6,000 kg, grinding diameter: 850 mm, grinding length: 6,000 mm, center height: 425 mm, Cylindrical grinder Schmaltz - RM 82/6000 MACH-ID 9492 Make: Schmaltz Type: RM 82/6000 Centre height: 425mm Grinding Ø: 850mm Grinding length: 6000mm Grinding stone dimensions:1100 x 80 x 560mm Grinding stone speeds: 700Rpm Table inclasement: -5 to +5° Tailstock: 160 x 100Mk Nledpfx Agoy Dr Eas Dja Length: 19000mm Width: 3500mm Height: 2100mm Weight: 31000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, The UFS-155 is a universal cutter grinder, ideal for manually regrinding straight and helical cutting tools. It offers a reliable and precise solution for regrinding work in workshops and manufacturing facilities. Main features: • Simple and user-friendly operation • Backlash-free spiral grinding device • Infinitely variable helix adjustment from 0 - ∞, quickly and easily left or right Nledpfx Agsd Hhhpj Doa • Grinding length up to 155 mm • Quick and easy assembly • Suitable for HSS and carbide tools Scope of delivery includes: • 3 SK40 reducing sleeves • 1 control unit • 3 index plates

Condition: good (used), Nagel Foldnak Compact Booklet Maker with Trimmer The machine is in working order and ready for production. Very good condition. The machine stitches at two points and folds in half to create a finished booklet, while the final knife trims the front of the booklet. Description: – Regular stitching and optional loop stitching (standard staples, economical to operate) – Adjustable heads – Option to disable stitching or folding (allowing for sewing only, for example) – Push-button or photocell triggering – Copy counter – Side and front alignment Nlsdpoy Hgi Eefx Ag Dea – Staple indicator light – SRA3 format – 230V power supply Supports non-standard formats.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Control: Numroto incl. software Center height: 155 mm Maximum tool length: 270 mm Working area X/Y/Z: 530/400/320 mm Grinding wheel interface: HSK-E50 Spindle power: 16 kW Max. speed: 12,000 rpm Power: 16 kW 4-position automatic grinding wheel changer Nedpoy Eg Ryjfx Ag Dsla including pallet loader with pallets

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 60180, Republic Lagun VBM vertical spindle surface grinding machine 1000-F Nljdsy Ey Dtjpfx Ag Dea

Condition: used, functionality: fully functional, machine/vehicle number: 113509, High-precision surface grinding machine Willis, 460V, industrial grinder Nedpfx Agey Eyt Uo Dsla

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 2706CNC00217, The JAINNHER CNC cylindrical grinding machine is designed for grinding the external surfaces of cylindrical and conical parts in automatic and manual modes using longitudinal and plunge grinding. Nledpfx Asy Exi Isg Dea

Condition: new, Year of construction: 2026, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Njdpfx Ajy Drbnog Dsla Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Njdey Drbhepfx Ag Dela Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: used, Year of construction: 2000, functionality: fully functional, OKAMOTO ACC 95DX Precision Surface Grinder – 400V For sale is an OKAMOTO ACC 95DX surface grinder. This is a robust industrial machine designed for precision surface grinding, making it ideal for toolmaking and manufacturing applications. The machine comes with a separate control console. Inspection and test run available by appointment. Machine Data: • Manufacturer: OKAMOTO Machine Tool Works, Ltd. • Model: ACC 95DX (Nameplate: ACC95DXM) • Serial number: 690277 • Voltage: 400 V • Phases: 3 • Frequency: 50 Hz • Total connected load: 8.6 kVA • Control/Auxiliary voltage: AC 100 V, DC 22/24 V (as per nameplate) Equipment / Notes: • Side-mounted control console (see photo) • Grinding head/safety enclosures included • Availability: immediate / by arrangement • Sale ex stock, subject to prior sale Nedpfxswtm Die Ag Djla

Condition: excellent (used), Year of construction: 2020, operating hours: 1,800 h, overall weight: 3,000 kg, rotor diameter: 360 mm, rotor length: 1,000 mm, power: 45 kW (61.18 HP), Shredder, ideal for processing pallets, cables, plastics, and more. Equipped with a feed conveyor with magnetic drum for nail separation. Also suitable for plastics thanks to the powerful 45 kW motor. Fitted with hydraulic pusher. Rotor width: 1000 mm. Rotor diameter: 360 mm. Motor: 45 kW. 56 blades on the rotor. Original price was €80,000! Nlsdpfx Agew Td S Nj Dsa

Condition: good (used), mileage: 879,179 km, power: 338 kW (459.55 HP), first registration: 02/2019, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,000 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2019, Equipment: AdBlue, cruise control, electric window regulation, onboard computer, soot filter, spoiler, tail-lift, = Additional Features and Accessories = - Roof spoiler - Refrigerator - Particulate filter = Notes = Volvo FH13.460 Globetrotter XL 6x2 – Chassis with tail lift – 6000 mm wheelbase – Full air suspension – Euro 6 Year: 27-2-2019 Mileage: 879,179 km VIN: YV2RTY0C2KA841490 Zepro tail lift Full air suspension Leather seats WB 6000 mm Nedpfxey A Ep Ne Ag Dola = Further Information = Technical Information Number of cylinders: 6 Gross vehicle weight: 28,000 kg Transmission Transmission: I-Shift, 12-speed, automatic Axle Configuration Suspension: Air suspension Front axle: Tyre size: 385/55R22.5; Max. axle load: 9,000 kg; Steered; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 1: Tyre size: 315/70R22.5; Twin wheels; Max. axle load: 11,500 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Rear axle 2: Tyre size: 385/55R22.5; Max. axle load: 7,500 kg; Tyre tread left: 50%; Tyre tread right: 50% Functionality Tail lift: Zepro, tailgate Body make: Volvo Condition Technical condition: good Visual condition: good

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro C7200x’ colour production system Items for sale: 1 x Ricoh Pro C7200x with the following specifications: Nlsdpfx Agoy Dffys Dea Includes Fiery Controller E-45A Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5050 incl. Banner Sheet option Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,403,577 pages Colour: Approx. 1,749,798 pages Black: Approx. 653,779 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 2012, Kent KGS 250 WM1 surface grinding machine year of manufacture: 2012 max. grinding range: 460 x 200 mm max. height: 300 mm top dresser electronic handwheel variable magnetic force central lubrication Nedpfx Ajx A D H Rjg Dsla touchscreen with settings for rough and finish grinding, etc. cooling water/filter tray documentation machine is powered on for inspection

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm Nodsy Am Dnopfx Ag Djla loading height : 2.200mm pneumatic lid

Condition: used, axle configuration: 3 axles, first registration: 02/2015, total length: 14,040 mm, total width: 2,600 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,010 mm, Year of construction: 2015, Equipment: ABS, = Additional options and accessories = - Air suspension - Disc brakes = Additional information = Axle configuration Tyre size: 385/65 R 22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Tyre tread left: 25%; Tyre tread right: 25% Rear axle 3: Tyre tread left: 35%; Tyre tread right: 35% Weights Unladen weight: 920 kg Payload: 38,080 kg Gross vehicle weight: 39,000 kg Functionality Loading platform height: 120 cm Refrigeration engine: Diesel and electric Condition Damage: None Nedpfxoy Al Tho Ag Dola Identification Registration number: OT-87-LN