Used Flexicam S2 2030 for sale (3,603)

Condition: used, Three-phase motor, electric motor -Power: 1.5 kW Kledodwhuiopfx Akxet -Speed: 2820 rpm -Shaft: Ø 24 x 30 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 300/230/H170 mm -Weight: 13.1 kg

Condition: used, Control unit, control panel, control panel, control unit, foot switch, safety foot switch -Manufacturer: Steute, 2-pedal safety foot switch -Type: C S2 OS/OS Kledpfxsgqlgys Akxjt -Metal housing: with protective cover, die-cast aluminum -Dimensions: 275/280/H130 mm -Weight: 2.6 kg

Condition: used, Year of construction: 2002, functionality: fully functional, HOMAG Optimat KL79 A20/S2 (2002) – Full Configuration The edge banding line is in satisfactory working condition, fully operational and ready for production. Installed Units: • A20/S2 gluing station (edge thickness up to 20 mm) • Edge feed magazine • Front/rear end trimming units (two saw modules) • Top and bottom trimming units • Corner rounding units (two heads) • Profile scraper units (top/bottom) • Glue joint scraper • Buffing/polishing units • Pneumatic control and vacuum extraction system Kjdpfx Asycg D Tokxelt Technical Data (from manufacturer specifications): • Feed speed: 18–24 m/min • Edge thickness: 0.3–20 mm • Workpiece thickness: 12–60 mm • Minimum workpiece width: 55 mm (22 mm thickness) / 100 mm (60 mm thickness) • Machine length: 10,115 mm • Weight: ~6,200 kg • Power supply: 400 V, 50/60 Hz • Compressed air: 8 bar

Condition: excellent (used), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-cooled Two-chamber design Hot Chamber: The temperature range of the hot chamber extends from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: The cold chamber temperature range is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Hot chamber temperature range: +50°C to +220°C Cold chamber temperature range: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +10% 50 Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Weight: 1,000 kg Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate Kjdpfxowxc I Uo Akxelt 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Heraeus shock test chamber Here we offer a shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature range of the warm chamber is from +50°C to +220°C. Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Kodpfx Ajikvlxokxolt Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: Temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Operating hours: 27.903 hrs. Weight: 1000 kg For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Kledpfxsi Az Ege Akxst Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer Vötsch shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -80°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate Kjdpfx Aeigg Hnskxjlt heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Feedthrough ∅ 67mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: VT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Ytterbium Fiber Laser Type: YLR-2400 S2-WW Description: Laser cell (fiber laser IPG YLR-2400 S2-WW with cooling) YEAR: 2017 S/N: 7121450 Laser source 2.4 kW Laser structuring system, cooling unit KKW; without 3D scan head and without laser spy sensors and cables. 400 VAC +/-10% 3P/PE 50/60 Hz 80A Condition: gebraucht / used Scope of delivery: (see picture) Kjdjf Dkftspfx Akxolt (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Model: VT 7012 S2 Water-cooled Two-chamber configuration Hot chamber: Temperature range of hot chamber: +50°C to +220°C Temporal temperature deviation at the center of useful space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Kjdpfx Akex Hhfhexolt Temperature range of cold chamber: -74.5°C to +70°C Temporal temperature deviation at the center of useful space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg Important safety information for buyers: The following actions are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) We are happy to answer further questions by phone.

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Kodpox Hglyefx Akxjlt Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone.

Condition: ready for operation (used), Rexroth MAD225C-0100-SA-S2-FH0-35-N1 / R911317252 Servomotor SN:7800406280035,used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Klsdpfotzhf Uex Akxot

Condition: new, Rexroth CSH01.1C-PB-ENS-NNN-NNN-S2-S-NN-FW MNR: R911328093 SN:7260406036068, unused, 100% functional, scope of delivery as per photos Kledpfxjl Eci Ho Akxjt

Condition: ready for operation (used), Rexroth MSK101D-0300-NN-S2-AG0-RNNN 3-phase permanent magnet motor MNR: R911320508 SN:MSK101-03323 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Ksdju T Akbspfx Akxolt

Condition: new, Festo DSL-32-25-270-P-S2-CC swivel linear unit 163100, with 2 shock absorbers YSR-8-8-C / 34571, with 2 proximity switches 150387, unused, 100% functional Klodpfx Akoi D U I Usxst

Condition: new, Rexroth MAF 130D-0150-FQ-S2-AH0-05-V1 3-phase induction motor, MNR: R911323903, SN: MAF130-04157, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kedpfoi D Ngyox Akxolt

Condition: ready for operation (used), Rexroth CDB01.1C-S3-ENS-ENS-EN2-EN2--S2-S-NN-FW MNR: R911328503, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Klodpfx Aei Ecprskxjt

Year of construction: 2019, condition: used, functionality: fully functional, empty load weight: 90 kg, total length: 2,000 mm, load capacity: 900 kg, Carrying mandrel Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Klodpfx Aexnt Twokxot Technical condition: very good Description: Further data on request

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, 24 vertical spindles, 10 horizontal spindles, 7-position tool changer, 8 vacuum worktables with digital position display, interchangeable angle gearbox. Usable length of the workpiece support: 3200 mm, width of the workpiece support: 925 mm. Kedpex Iulwefx Akxolt

Condition: new, Year of construction: 2025, Fully automatic paper labelling machine for applying labels on both sides (back and front). PLC controlled or touch switch knob control, photoelectric device (LEUZE sensor), variable speed motors and conveyor chain board. - Specification: label length: 10-250mm; label width: 10-150mm; bottle diameter: customized; label core diameter: 76mm. max. label roll diameter: 300 mm. Label precision: ± 1mm; max. speed of the machine in neutral: 150 cycles/minute; power: 220V/380V, 50Hz/60Hz, 750W; machine dimensions: L2400mm×W1500mm×H1400mm; weight: 400kg. Kledpsv Nk Sqofx Akxst Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), throat depth: 415 mm, water-cooled, compressed air-operated spot welding machine Make DALEX type A 3139-S2 Rated power at 50 % duty cycle: 8 kVA Klodpfxjtdnqze Akxet Sec. short-circuit current: 8 kA sec. open circuit voltage: 2.9 V Electrode force: 300 daN with cardan suspension and suspension bracket 10 m connection cable Synchronous welding control RS 15 1 pair of electrode arms 415 mm projection top 245/55-1 K and bottom V 20//415 S

Condition: used, Year of construction: 2011, Scissor Lift Platform – JLG 2030 ES Manufacturer: JLG Model: 2030 ES Year of manufacture: 2011 Technical Data Working height: 8.10 m Platform height: 6.10 m Platform length: 2.24 m Platform width: 0.69 m Total weight: 2,020 kg Length: 2.30 m Kjdpfx Akoxfi Dgsxolt Width: 0.76 m Overall height (stowed): 2.20 m Platform capacity: 360 kg Outriggers: none Drive: electric Special Features Platform extension: 0.90 m with 360 kg capacity Suitable for indoor and outdoor use (outdoor use for one person only, max. 160 kg) Non-marking tyres Foldable guard rails, height 1.81 m Miscellaneous: 4 new batteries (installed 04/2025) Driver’s license: Class 3/B Inspection Status TÜV: not required UVV inspection valid until: 09/2025 Mileage: not applicable Operating hours: 501 hrs as of 04/2025 Price plus statutory VAT. Interested? We are always happy to assist you! You can reach us Mon – Fri from 7:00 am to 4:00 pm. Subject to prior sale and errors!

Condition: used, Year of construction: 2011, Scissor Lift - JLG 2030 ES Manufacturer: JLG Model: 2030 ES Year of Manufacture: 2011 Technical Specifications Working Height: 8.10 m Platform Height: 6.10 m Platform Length: 2.24 m Platform Width: 0.69 m Total Weight: 2,020 kg Length: 2.30 m Width: 0.76 m Clearance Height: 2.20 m Basket Capacity: 360 kg Stabilizers: None Kodpfx Aexfi D Hskxslt Drive: Electric Special Features Platform Extension: 0.90 m with 360 kg capacity Suitable for indoor and outdoor use (outdoor operation: max. 1 person, 160 kg) Non-marking tires Foldable guard rails, height 1.81 m Driving License Class: 3/B Service/Inspection Status TÜV: Not required UVV Safety Inspection: valid until 11/2025 Mileage: Not applicable Operating Hours: 495 hours as of 04/2025 Price indicated excluding statutory VAT. Are you interested? We are always at your disposal! You can reach us Monday - Friday from 7:00 am to 4:00 pm. Subject to change and errors!

Condition: new, Year of construction: 2026, functionality: fully functional, Pros: • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table Kledpfxsur N A Ns Akxet

Condition: new, Year of construction: 2026, Router CNC2030 ATC 4 axes, tilting spindle +/- 90 degrees working area 2100 x 3000 [mm] The ATC series of plotters was created for professional use in large industrial plants and factories. These machines are designed to process a wide range of materials. In order to meet the demands of heavier machining, the ATC machines feature an additionally reinforced construction and more powerful AC servo drives on each axis. A vacuum work table is standard on these machines. It is also possible to install a hybrid table. Plotters in this series are equipped as standard with automatic tool changing, a six-position linear magazine and a tool height sensor. The solutions used significantly speed up the machining process requiring the use of several cutters. Materials to be machined: wood wood-based materials (chipboard, MDF, OSB, etc.) plastics composites PVC non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The structure of the machine tool is made of steel and cast iron which gives it high rigidity, as well as resistance to the overloads associated with the machining process. Ksdpoirfavefx Akxjlt WORKING SURFACE: The usable area of our machine tool is 2100 x 3000 [mm]. MATERIAL CLAMPING: The machine is equipped with a vacuum table. It is possible to install a hybrid or T-table. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 300 [mm] as standard (can be increased). DRIVES: SERVO motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes are driven using classic and proven helical rollers to ensure long service life and precision, while the Z axis is driven using a high-performance ball screw. All axes move on rail guides.... SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. The power supply is provided by an inverter, which has more power than the spindle, which protects against speed drops when operating under heavy load. TOOL STORAGE: The machine tool comes standard with a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine has been supplied with the appropriate CAD/CAM software in its latest version. The software makes it possible to design parts quickly and easily, which the programme then converts into so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is controlled by a controller, which has its own processor and operating memory to ensure stable and reliable operation. The machine controller is equipped with active vector analysis functions, so that operation of the machine is smooth and there is little overshoot during processing. The controller has a recovery function to continue operation after a power loss, so there is no need to initialise the programme from scratch. The controller's on-board memory allows the machine to work without having to load the programme each time.

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Klodpfxjin Etzo Akxst Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.