Used Fliegl Sds 380 Gooseneck 40Ft. Starr for sale (5,320)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 32,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Save on transport costs! Upon request, up to three curtainsider trailers can be delivered as a space-saving 3-unit stack. Roof and side curtains are supplied separately and can be easily installed after delivery. Benefit from significantly reduced transport costs. Customized transport solution Configure your Fliegl trailer according to your requirements. The shown vehicle is an example only. Production and equipment are customized according to customer specifications. #Chassis Fine-grain steel welded construction with "Preload" neck area reinforcement Fifth wheel plate with replaceable 2" kingpin Outer frame with Load-Lock profile for securing straps 24 t 2-speed landing gear, one-side operation Extendable rear ladder Aluminium side underrun protection Galvanized steel underrun protection Rear impact protection Lockable plastic toolbox, W=600 / H=425 / D=460 mm Storage box for fire extinguisher up to 6 kg #Axles + Suspension Disc brake axles Laser-measured axle and chassis alignment for reduced tyre wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and starting aid (activated by 3x brake operation) #Brake system Dual-line compressed air braking system Colour-coded brake lines for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connecting lines EBS electronic braking system with EBS socket at front Raise/lower valve Vehicle height increases by approx. 50 mm when lift axle is raised Vehicle driving stability system #Wheels and tyres 445/45 R19.5" steel rims, factory silver finish #Electrical system 24 V system, multi-chamber lights Yellow LED side marker lights White front position lights White/red rear lane marker lights 2 x 7-pin non-interchangeable sockets at front Blsdpfx Amozmub Hszek #Floor Approx. 30 mm phenolic plywood floor panels on longitudinal supports High point load capacity for forklift axle loads up to max. 7,100 kg Rear steel chequer plate flooring approx. 300 mm length #Front wall / Corner posts Height 2,580 mm Steel corner posts in high-volume design Side curtain release system at front wall "Crash Blocker" steel impact protection inside lower area (approx. 140 mm height) Front wall additionally covered inside with 1,250 mm high phenolic plywood panel #Centre posts 3 pairs of sliding posts, movable over full length With 4-fold insertion pockets and long lower pocket 3 post positions 4 rows of aluminium V-insertion slats #Rear wall / Corner posts Steel rear corner posts up to roof height Curtain attachment with round tube and tension ratchet Double-wing rear portal doors with 2 internal rotary bar locks each #Curtain Curtain with welded horizontal and vertical reinforcement belts Stainless steel tension buckles #Roof Sliding roof system with rear end lift function Roof opens from rear to front L-shaped roof beam for automotive industry applications Non-elastic roof with minimal deflection during loading and unloading Optimized rain gutter at rear, mounted on top rear cross member above doors EcoLift roof lifting system, height adjustable by approx. 380 mm on both sides with gas spring assistance Complete body supplied loose as a kit (unassembled).

Condition: excellent (used), For sale: Mannesmann Demag S040-B5-21-3 geared motor with a three-phase UMF71BX-6-Z motor, 0.25 kW. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good, with normal signs of wear and tear from use. The robust gearbox and reliable motor make this geared motor ideally suited for driving conveyors, feeders, production machines, and other industrial equipment. Technical specifications: Manufacturer: Mannesmann Demag Gearbox type: S040-B5-21-3/ Motor type: UMF71BX-6-Z Motor power: 0.25 kW Power supply: 3× 220/380 V, 50 Hz Motor speed: 890 rpm Output speed: approx. 64 rpm Gear ratio: i = 14 Current: 1.56 / 0.90 A Power factor: cos φ 0.73 Protection rating: IP54 Insulation class: B Bedpfx Aeznxa Aomzjlk Lubrication: synthetic oil Country of manufacture: Germany

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Save on transport costs! Upon request, up to three curtainsider trailers can be delivered as a space-saving 3-unit stack. Roof and side curtains are supplied separately and can be easily installed after delivery. Benefit from significantly reduced transport costs. Customized transport solution Configure your Fliegl trailer according to your requirements. The shown vehicle is an example only. Production and equipment are customized according to customer specifications. # Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame with Load-Lock profile for securing straps 24 t 2-speed landing gear, one-side operation, with load compensation Extendable rear ladder, side door retainers 2 wheel chocks with holders Aluminium side underrun protection, galvanized steel underrun protection Quarter mudguards with EC-compliant anti-spray mud flaps Rear impact protection 2 spare wheel holders + 1 spare wheel (same make as standard tyres) Lockable plastic toolbox Storage box for fire extinguisher up to 6 kg # Axles + Suspension BPW disc brake axles with 430 mm discs Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and starting aid (activated by 3x brake operation) # Brake system Dual-line compressed air braking system Colour-coded brake lines for easy service Spring-loaded parking brake EBS electronic braking system with EBS socket at front Raise/lower valve and vehicle stability system # Wheels and tyres 385/65 R22.5" steel rims, factory silver finish # Electrical system 24 V system, multi-chamber lights Yellow LED side marker lights White front position lights White/red rear lane marker lights 2 x 7-pin sockets at front # Floor Approx. 30 mm phenolic plywood floor panels on 8 longitudinal supports High point load capacity for forklift axle loads up to max. 7,900 kg Rear steel chequer plate flooring approx. 300 mm length # Front wall / Posts Height 2,580 mm Steel corner posts in high-volume design "Crash Blocker" steel impact protection inside lower front area # Centre posts 3 pairs of sliding posts, movable over full length 4-fold insertion pockets and long lower pocket 3 post positions 4 rows of aluminium V-insertion slats # Rear wall Steel rear corner posts up to roof height Curtain attachment with round tube and tension ratchet Double-wing rear portal doors with internal rotary bar locks # Curtain Curtain with welded horizontal and vertical reinforcement belts Stainless steel tension buckles # Roof Blodpfxszmtmuo Amzek Sliding roof system with rear end lift-up function Roof opens from rear to front L-shaped roof beam for automotive industry applications Non-elastic roof with minimal deflection during loading/unloading Optimized rear rain gutter Complete body supplied loose as a kit (unassembled).

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, *Save on Transport Costs! Up to three platform trailers can be delivered as a space-saving 3-unit stack. Simply assemble the front wall yourself after delivery and benefit from significantly reduced transport costs. *Customized Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. #Chassis High-strength steel welded chassis Fifth wheel with replaceable 2" kingpin Angled outer frame with Load-Lock profile for easy strap attachment 24 t two-speed landing gear, single-side operation, semi-round feet with load compensation Approx. 1,930 mm rear swing clearance Rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Galvanized rear underrun protection Quarter fenders in front of and behind axle assembly Anti-spray mud flaps (EC compliant) Rear impact protection 2 spare wheel carriers incl. mounting kit 1 spare wheel with steel rim Lockable plastic toolbox #Axles & Suspension BPW disc brake axles (430 mm) Laser-aligned axle and suspension system for reduced tyre wear and fuel consumption Air suspension Automatic lift axle with forced lowering and traction aid (activated by pressing the brake pedal 3 times) #Braking System Dual-line air brake system Colour-coded air lines for easier servicing Spring parking brake 2 interchangeable air couplings at front (without connecting lines) EBS electronic braking system with front EBS socket Raise/lower valve Vehicle Stability System (RSS) Suitable only for tractors equipped with ABS #Tyres 385/65 R22.5 tyres Steel rims, factory silver #Electrical System 24 V lighting system Multi-chamber rear lights LED side marker lights 2 white front position lights Bledpfx Amozmtc Aezek 2 red/white rear outline marker lights 2 × 7-pin front sockets (without connecting cables) #Loading Platform Approx. 30 mm phenolic plywood floor 8 longitudinal support beams Forklift axle load up to 7,900 kg Steel chequer plate reinforcement at rear #Front Wall Approx. 1,350 mm aluminium front wall Heavy-duty steel corner posts Front curtain release system Crash Blocker with integrated steel impact protection #Registration & Certificates German registration EC type approval (2007/46/EC) 24/7 service hotline Optional delivery as a secured 3-unit transport stack Fliegl body strength certificate according to EN 12642 XL ECE R70 rear warning plate

Condition: excellent (used), For sale: a SEW-EURODRIVE RF43 DT71D4 geared motor with a three-phase motor with a power of 0.37 kW. The unit is fully functional, tested, and ready for operation. The technical condition is very good; visually, it has normal signs of use resulting from operation. The geared motor is equipped with a cylindrical gearbox with a B5 mounting flange, making it ideal for driving conveyors, feeders, production machines, and other industrial equipment. Technical specifications: Manufacturer: SEW-EURODRIVE Gearbox type: RF43 Bljdpfxjznv Hao Amzek Motor type: DT71D4 Power: 0.37 kW Power supply: 3×220/380 V, 50 Hz Motor speed: 1380 rpm Output speed: 22 rpm Output torque: 137 Nm Design: IM B5 Protection class: IP54 Insulation class: B Power factor: cos φ 0.70

Condition: used, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 04/2023, next inspection (TÜV): 05/2027, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 870 mm, total width: 2,550 mm, total height: 870 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle semi low-bed trailer with lifting platform, grating floor, cable winch, and electric hydraulics. First registration. Bljdpfxszmqm Eo Amzek Total weight: 41,000 kg Unladen weight: 11,800 kg Maximum fifth wheel load: 17,000 kg B-dimension: 11,850 mm Tire size: 12-ply 235/75 T 17.5 Hydraulically liftable lifting platform in the low-bed Floor made entirely of grating Extra-long, two-part loading ramps, hydraulically foldable and adjustable Rear support Electric cable winch with nylon strap and remote control SAF axles with drum brakes Third axle with trailing steering Haldex trailer EBS In very well-maintained condition. RENTING is the new BUYING; with us, it is also immediately available in a full-service rental package.

Condition: excellent (used), For sale: SEW-EURODRIVE R32DT71D6 geared motor with a three-phase electric motor, 0.25 kW. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good. Normal signs of use resulting from operation are visible. Thanks to its robust construction, the geared motor is ideal for driving conveyors, feeders, production machines, mixers, and other industrial equipment. Bjdpfeznfb Tjx Amzolk Technical data: Manufacturer: SEW-EURODRIVE Type: R32DT71D6 Power: 0.25 kW Motor speed: 870 rpm Output speed: 36 rpm Power supply: 220 V Δ / 380 V Y Frequency: 50 Hz Rated current: 1.65 / 0.95 A Power factor: cos φ 0.80 Protection class: IP54 Insulation class: B Duty cycle: S1 (continuous operation) Design: IM B8 Weight: 11.17 kg Country of manufacture: Germany

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 22,100 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 860 mm, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Heavy-duty welded steel low-loader turntable trailer with robust ball-bearing turntable. Folding rear support. Aluminium side underrun protection. Full-width rear mud flap. Quarter mudguards in front of the 1st axle. Extendable loading platform up to 3,000 mm. Integrated storage compartment for timber extension beams. 70 mm timber extension planks included. Two pairs of recessed wheel wells: Front wheel wells behind the gooseneck, approx. 1,600 mm long and 400 mm deep. Rear wheel wells between the axles, approx. 600 mm long and 300 mm deep. Removable steel covers for wheel wells. Main frame spacing approx. 1,280 mm in wheel well area. Lashing Equipment 1 pair of 10 t lashing cut-outs in the gooseneck 4 pairs of 5 t lashing holes in the outer gooseneck frame 7 pairs of recessed 10 t lashing mushrooms Lashing point spacing max. 1,100 mm Recessed stake pockets (70 × 40 mm), convertible to 5 t lashing rings Additional 10 t folding lashing rings on the gooseneck and rear beavertail Drawbar Height-adjustable drawbar with certified 40 mm towing eye. Axles & Suspension SAF drum brake axles Laser-aligned axle/suspension geometry for reduced tyre wear and fuel consumption Air suspension with raise/lower valve Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver Braking System Dual-line air brake system Spring parking brake Electronic Stability Program (ESP) Axle load indication via EBS CAN bus Front air couplings with connecting lines Parking sockets for ABS/EBS and air connections 24 V EBS with front connector Trailer Info Module displaying axle loads, mileage and diagnostic data Bodpfjzl Uv Uox Amzslk Electrical System 24 V full LED lighting LED side marker lights LED number plate light LED front position lights LED rear outline marker lights Parking sockets for electrical connections Extendable illuminated LED warning boards up to 3,000 mm Loading Platform Steel chequer plate on gooseneck Integrated storage box in transition area Approx. 70 mm timber floor Steel chequer plate over wheel wells Rear beavertail with 70 mm timber decking Total low-bed deck length incl. beavertail: 6,500 mm Loading Ramps Hydraulic steel loading ramps Length: 3,000 mm Width: 750 mm Side-adjustable Foldable lower ramp locking system Mega Grip serrated grating surface with chequer plate ramp tips Hydraulic operation via tractor PTO with flow restrictor Hydraulic connection with SVK coupling (NW 10/3)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,740 kg, maximum load weight: 14,260 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Attention: Archive pictures are used! Chassis Heavy-duty welded steel low-loader turntable trailer chassis Heavy-duty turntable with ball-bearing race Integrated storage box in turntable front section Folding rear support Wheel chocks with holders Bjdpfx Amszl R S Sjzolk Aluminium side underrun protection Full-width rear mud flap Semi-circular mudguards on 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd axle Spare wheel carrier incl. spare wheel (steel rim) Lockable plastic toolbox with shelf (padlock not included) Lashing Equipment 3 pairs of integrated 10 t lashing points at the front 5 pairs of recessed 10 t lashing mushrooms on top and sides of the outer frame Additional 5 t recessed lashing rings instead of stake pockets Maximum spacing between lashing points: 1,200 mm Drawbar Height-adjustable drawbar with certified 40 mm towing eye, angled by 8° Axles & Suspension SAF drum brake axles Laser-aligned axle and suspension geometry for reduced tyre wear and fuel consumption Maintenance-free parabolic spring suspension with steel-rubber bushings Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Two anti-mix coupling heads with air lines to towing vehicle ABS & ALB with front ABS connector and connection cable Compatible only with towing vehicles supporting ABS functionality Electrical System 24 V lighting system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front connectors with connection cables Loading Platform Steel deck in front section 70 mm softwood flooring Steel chequer plate over wheel arches Rear beavertail with 70 mm timber flooring Total low-bed loading area incl. beavertail: approx. 7,200 mm Loading Ramps 2 steel loading ramps Length: 2,800 mm Width: 750 mm Side-adjustable Timber-covered Spring-assisted lifting Foldable lower ramp locks to prevent lateral movement Operating Notes A special permit is required for 10,000 kg axle load (approval must be obtained individually in each German federal state). The stated gross vehicle weight is technically possible; depending on the cargo, the maximum permissible weight may not be achievable while complying with legal axle, kingpin and support loads. Registration Registration: Germany EC type approval (2007/46/EC) 24/7 service hotline Prepared for two-line licence plate holder ECE R48 reflective contour marking (white sides, red rear) ECE 70 rear warning plate

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902024934, empty load weight: 3,900 kg, maximum load weight: 31,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: white, Archive photos shown! Demonstration vehicle Additional Information Chassis Lightweight high-tensile steel welded tipping semi-trailer chassis with replaceable 2" kingpin. Frame without side supports for gearbox landing legs. Patented curved front design. Central telescopic support leg. Trailer cannot be uncoupled while loaded; when uncoupled, it must remain inclined to the rear. Wheel chocks with holders. Folding rear underrun protection. Half-shell mudguards with new mounting system and anti-spray flap on the rear axle. Tarp support bar with holder. Rear towing hook. Axles & Suspension SAF lightweight disc brake axles with 370 mm brake discs. Laser-aligned axle and suspension system for reduced tyre wear and fuel consumption. Switchable tipping stabilizer on the 3rd axle. Air suspension with air pressure gauge. Automatic first lift axle with traction aid, also electrically controlled from the tractor (no tractor installation required). Traction aid operates up to 30% axle overload and max. 25 km/h. Braking System Dual-line air brake system with colour-coded air lines for easy servicing. Spring parking brake. Front air couplings without connecting hoses. Electronic Braking System (EBS) with front socket. Trailer must only be operated with towing vehicles supporting ABS functionality. Raise/lower valve. Electronic Stability Program (ESP). Automatic lowering during tipping with shut-off valve. Wheels & Tyres 385/65 R22.5 Fulda tyres. Polished aluminium wheels. Electrical System Bsdpfxozl E Egs Amzslk 24 V LED lighting with resistors. LED side marker lights. LED number plate lighting. LED front position lights. LED rear marker lights. 15-pin front connector. Additional rear LED work light activated via reverse gear. Hydraulics Low-pressure tipping cylinder (max. 170 bar) with HDK screw coupling, DN 48 (without hose connection). Hydraulic operation via PTO. Hydraulic hose with HDK screw connector included. Body Lightweight aluminium box body made from high-quality, wear-resistant material. 5 mm sloping front wall with external cylinder mount. Side walls made of 30 mm hollow aluminium profiles with anti-spillage top rail. External shovel and broom holder. Internal front access ladder. Aerodynamic Greenline tapered body. Membrane tailgate with external double-hook locking system and rubber seal. Heat-resistant up to 170°C. One-piece 6 mm floor. Front platform with access ladder. Lightweight roll tarp opening to the right with central locking on the left. Operating Information For transporting salt, lime or similar materials, Fliegl recommends a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion. The stated gross vehicle weight is technically achievable; however, depending on the load, the maximum permissible weight may be limited by legal axle, kingpin or support loads.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,228 kg, maximum load weight: 29,772 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is for illustration only. Production and equipment are tailored to customer specifications. Chassis Lightweight high-tensile steel welded chassis with replaceable 2" kingpin. Patented curved front design. 24 t two-speed landing gear with single-side operation. Rear swing clearance approx. 2,100 mm (rear position) / 2,600 mm (front position). 2 wheel chocks with holders. Aluminium side underrun protection. Pneumatically folding rear underrun guard. Half-shell mudguards with anti-spray flap on the last axle. Rear towing hook. Axles & Suspension SAF 430 mm disc brake axles in off-road specification. Laser-aligned axle/suspension system for reduced tyre wear and fuel consumption. Air suspension with air pressure gauge. Automatic first lift axle with forced lowering and traction aid, also electrically operated from the tractor. Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty. Braking System Dual-line air brake system with colour-coded air lines. Spring parking brake. 24 V EBS with front socket. Raise/lower valve. Electronic Stability Program (ESP). Automatic tipping lowering system with shut-off valve. TPMS (ECE R141) via EBS with display in the tractor. Axle load indication via EBS CAN bus. Tyres 385/65 R22.5. Electrical System 24 V LED lighting. LED front position lights. LED rear marker lights. LED side marker lights. 2 × 7-pin and 1 × 15-pin front sockets. Two recessed LED rear work lights. Hydraulics Low-pressure tipping cylinder (max. 170 bar), hard chrome-plated first stage. Hydraulic operation via PTO. Hydraulic connection with 48 mm HDK screw coupling. Body Round steel body in Stone Master Design, manufactured from wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Internal front access ladder. Aerodynamic Greenline tapered body design. External shovel and broom holder. Hydraulic rear tailgate with approx. 2,200 mm opening height. Tailgate protection cover and rubber seal. Heat-resistant up to 170°C. Side walls 4 mm, floor 4/5 mm, weight-optimised wear-resistant construction. Bsdpozl Ez Uefx Amzslk Cover System Fliegl S.T.E.P. swivelling front platform with folding access ladder (left side), in combination with Flip Top sliding cover. Electrically operated Flip Top cover with automatic rear locking bow, operated from the trailer or via radio remote control. 7-pin spiral cable to tractor included (tractor socket required).

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902035352, empty load weight: 6,460 kg, maximum load weight: 32,540 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 40,000 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, color: original, Note: The images shown are archive photos. The vehicle may still be in operation. Additional Information Chassis – Curtainsider Semi-Trailer Lightweight high-tensile steel welded chassis with replaceable 2" kingpin Rail-road (Huckepack) version for combined road/rail transport Huckepack load securing code XL with 4 crane gripping edges Overall height max. 4,000 mm with air suspension deflated for pocket wagon transport (880 mm support height), rail code P400 Curtain with integrated crane edge protection according to DB requirements PRO SLIDE front guide plates on both sides of the kingpin Heavy Push Frame reinforced outer frame for intensive side loading 1 pair of rear landing legs with straight foot and single-side operation (right-hand side) 4 pairs of ferry lashing rings, yellow marked Heavy-duty pallet stop on both sides, fully bolted Storage compartment for 32 side boards (16 per side) beneath the loading platform Document box (360 × 260 × 40 mm) Axles & Suspension SAF disc brake axles for combined transport with anti-sag wire rope protection (or equivalent design) Laser-aligned axles and suspension for reduced tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded air lines for easy servicing Bledpfx Aszl D Rzemzek Spring parking brake 2 interchangeable-proof air couplings plus C & CA-type air connections (UK) EBS electronic braking system with front EBS socket Raise/lower valve Electronic Stability Program (ESP) Brake pad wear indication via Trailer Info Center, including axle load, mileage and diagnostic/system information Tyre pressure monitoring system (TPMS) via EBS Wheels & Tyres 445/45 R19.5 Continental tyres Steel wheels, factory silver Wheel nut protection caps Electrical System 24 V lighting system 4 × three-chamber rear lights Round reversing light and rear fog light 2 red/white rear marker lights 2 × 7-pin and 1 × 15-pin front sockets 2 additional LED work lights at the rear Floor Approx. 30 mm plywood floor on longitudinal cross-members Forklift axle load capacity up to 7,100 kg Premium sealed floor with perimeter joint sealing Side Posts 3 pairs of sliding posts, fully adjustable 3 post positions Side Boards 5 rows of aluminium V-type side boards Curtain Reinforced curtain with welded horizontal and vertical straps 3 document pockets per side Stainless steel buckles Roof Sliding roof with rear end lift Roof slides from rear to front L-shaped roof beams for automotive loading Internal roof width approx. 2,490 mm White roof curtain Five-point roof bow securing system with additional roof safety hooks on every second roof bow Non-elastic roof design with minimal roof beam deflection during loading/unloading Optimised rear rain gutter above the doors EcoLift lifting roof, raises approx. 380 mm on both sides with gas strut assistance

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037809, empty load weight: 7,722 kg, maximum load weight: 31,278 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: white, Archive photos shown. Vehicle may still be in operation. Fliegl Coil Curtainsider Semi-Trailer Chassis: Approx. 8,040 mm reinforced coil well with coil cover, 8 removable coil posts, 4 pairs of internal coil pockets, 1 pair of lashing adapters for coil posts, 4 pairs of removable 6 t Vario-Lash lashing rings, 7 pairs of 5 t lashing rings in the outer frame, 9 pairs of 5 t lashing rings in the coil well, 1 pair of 5 t lashing points in the longitudinal beam, pallet box for 8 Euro pallets, heavy-duty pallet stops with lashing points, spare wheel carrier, 2 lockable plastic toolboxes, galvanized rear forklift mounting bracket, 5 pairs of outer stake pockets and 3 centre stake pockets compatible with coil stakes. Axles & Suspension: SAF disc brake axles, laser-aligned axle geometry for reduced tyre wear and fuel consumption, TIS automatic tyre inflation and pressure monitoring system, air suspension, automatic lift axle with forced lowering, traction aid and electric truck control. Braking System: Dual-line air brake system with colour-coded air lines, aluminium air tank, spring parking brake, raise/lower valve with auto-reset, AAC Basic automatic unloading axle (manoeuvring aid up to 20 km/h), WABCO SmartBoard displaying axle loads, mileage and diagnostic messages, axle load monitoring via EBS CAN bus. Wheels & Tyres: 435/50 R19.5 tyres with polished aluminium wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables), 2 × 7-pin rear sockets for truck-mounted forklift. Floor: Approx. 30 mm plywood floor for forklift axle loads up to 5,600 kg. Front Wall: Front bulkhead with two pairs of lashing rings and integrated storage compartment accessible from inside. Bodozl D Iyepfx Amzelk Side Posts: 3 pairs of sliding posts, 5 post positions, 6 widening adapters (+25 mm each). Load Securing: 7 rows of aluminium side slats, 1 pair of Vario steel slats and 1 Vario locking beam for front and rear load securing. Roof: Fliegl Blitz sliding roof, Anti-Ice system with central air hose and automatic venting via brake light signal, Fliegl Easy Fix system with 12 pairs of strap holders integrated into the roof bows, EcoLift lifting roof (approx. 380 mm).

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037806, empty load weight: 7,960 kg, maximum load weight: 31,040 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: black, Archive photos shown. Vehicle may still be in operation. Fliegl Lightweight 50 m³ Tipping Semi-Trailer Lightweight high-strength fine-grain steel chassis with swan neck and replaceable 2" kingpin. 24 t two-speed landing gear, aluminium side underrun protection, foldable rear underrun guard, integrated stone-resistant mudguard supports and two rear towing hooks. Axles & Suspension: SAF 430 mm disc brake axles, laser-aligned axle/suspension geometry for reduced tyre wear and fuel consumption, air suspension, automatic front lift axle with forced lowering and traction aid, electrically controlled from the truck, hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty. Braking System: Dual-line air brake system with colour-coded air lines, spring parking brake, EBS (24 V), raise/lower valve, Vehicle Stability System (RSS), automatic tipping lowering valve, axle load monitoring via EBS CAN bus (display in tractor unit). Tyres: 385/65 R22.5 tyres on factory silver steel rims with TPMS (ECE R141), displayed via the truck's EBS system. Electrical: 24 V lighting system, LED rear lights, LED side marker lights with integrated flashing function, LED front position lights, LED rear outline marker lights, 2 × 7-pin and 1 × 15-pin front sockets, two integrated rear LED work lights. Hydraulics: Low-pressure tipping cylinder (max. 170 bar), hard-chromed first stage, operated via truck PTO, HDK hydraulic coupling (NW 48 mm). Body: Lightweight steel body made of highly wear-resistant HB400 steel with external hydraulic cylinder mount. Folding aluminium tarp protection, external shovel and broom holder, front access ladder. Side walls 4 mm, floor 5 mm. Membrane tailgate with split rear doors (50/50), grain hatch in the right door, external locking bars and mechanical lower locking. Rear platform with ladder and spacious air/electrical connection panel. Side roll-over tarp with central locking. Approval & Finish: Germany, EC type approval (2007/46), EN 12642 body certification, 24/7 service hotline, prepared for single-line licence plate, ECE R70 warning plate, foldable "A" warning plate for waste transport, ECE R48 contour markings. Chassis painted DB 7350 Nova Grey (10-year anti-corrosion warranty), black-coated landing legs, body in RAL 9005 Jet Black, tarp in RAL 7035 Light Grey. Bljdpfx Aozlz Uwomzek Archive photos shown. Vehicle may still be in operation.

Condition: used, first registration: 06/2018, Year of construction: 2018, Fliegl ZWP 180 ZWP 2-axle platform trailer ∗AS NEW∗ ! 4 units available ! ● First registered: 06/2018 ● Vehicle dimensions: 9,150 mm x 2,480 mm (L x W) ● Fully air-suspended ● Lifting/lowering system ● ABS ● 2 x air-suspended BPW axles, 9 tons each ● GVWR: 18,000 kg ● Unladen weight: 2,610 kg ● Payload: 15,390 kg ● Tire size front/rear: 385/65 R22.5 ● Tread depth: 8/8 / 7/7 mm - German vehicles! - 1st owner! - MOT / inspection: upon request and possibly with an extra charge: new!! Bsdszlwpdspfx Amzjlk Errors and prior sale excepted! = Further information = Unladen weight: 2,610 kg Payload: 15,390 kg GVWR: 18,000 kg

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902034305, empty load weight: 5,875 kg, maximum load weight: 33,125 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Archive photos shown. Vehicle may still be in operation. Fliegl Rail-Transport Curtainsider Semi-Trailer (Huckepack) High-strength fine-grain steel welded chassis with replaceable 2" kingpin. Rail-compatible Huckepack design for combined road/rail transport. EN 13044 railway coding with ILU code. XL rail load securing package for transport speeds up to 140 km/h, including 4 colour-marked crane grab areas, integrated grab protection in the curtain, roof markings for crane positioning, max. overall height 4,000 mm with air suspension lowered for pocket wagons. Foldable side and rear underrun protection, aluminium side guards, rear ladder, D-Lock door retainers, Heavy Blocker 2.0 rear impact protection, yellow ferry lashing rings and pallet stops on both sides. Axles & Suspension: SAF 430 mm disc brake axles for combined transport with anti-drop cable protection, air suspension, automatic lift axle with forced lowering and traction aid (activated by braking three times). Braking System: Dual-line air brake system with colour-coded air lines, spring parking brake, EBS with front socket, raise/lower valve with auto-reset function. Bledpfx Amszlrqcezek Tyres: 385/65 R22.5 tyres (manufacturer's choice), steel wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets, rear LED work light. Floor: Approx. 30 mm plywood floor on 8 longitudinal cross-members, forklift axle load up to 7,900 kg, premium sealed floor. Front Wall: 2,580 mm steel bulkhead with EN 12642 XL strength (0.8 × payload), Crash-Blocker and internal steel impact protection. Rear: Steel rear corner posts, EN 12642 XL rear portal (0.5 × payload), Fliegl I-Lock integrated door locking system (iF Design Award), lifetime warranty on frame-mounted locking components. Curtain: Reinforced curtain with welded horizontal and vertical straps, side curtain strength 0.4 × payload. Roof: Fliegl Blitz sliding roof with rear end lift, automotive L-roof beams, five-point roof fastening, additional roof safety hooks, non-elastic roof with minimal deflection, integrated rear rain gutter. Approval: Germany, EC type approval (2007/46), Fliegl EN 12642 XL, DL 9.5 and VDI 2700 Sheet 12 load securing certificates.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, total length: 10,020 mm, total width: 2,550 mm, tire size: 445/45 R19,5", color: grey, Platform Trailer – Specifications Chassis Fine-grain steel welded construction 1-speed landing leg at the front with straight foot and single-side operation on the right-hand side Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half fenders extending slightly beyond the main frame Rear impact buffers Drawbar Tandem trailer drawbar with certified 50 mm towing eye Transport version with under-mounted coupling drawbar Axles & Suspension BPW disc brake axles (manufacturer's choice) Air suspension with raise/lower valve Wheels & Tyres 445/45 R19.5 tyres (manufacturer's choice) Steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Front Duomatic connection with connecting line to the towing vehicle Haldex Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Loading Platform Bjdpfoni Udzox Amzolk Platform length: approx. 7,300 mm Phenolic plywood floor Front Wall Aluminium front wall, approx. 1,200 mm high Heavy-duty steel corner posts (volume design) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Registration & Certification Country of registration: Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective strips on the sides and red reflective strips at the rear

Condition: excellent (used), Miyachi Unitek HF25 DC Resistance Welding System controller. The unit is fully functional, starts up correctly, the display works, and all functions respond as expected. The screen displays the message “EMERGENCY STOP – OPERATOR ACTIVATED,” which indicates that the emergency stop circuit has been activated – this is not a malfunction of the device. This model is designed for precise control of the DC resistance welding process. It features a clear display, numeric keypad, the ability to program welding parameters, and RS-232 and RS-485 communication interfaces. Power supply: 380–400 V AC, 50/60 Hz. Technical specifications: Manufacturer: Miyachi Unitek Bedozma Sdspfx Amzjlk Model: HF25 Type: DC Resistance Welding System Power supply: 380–400 V AC, 50/60 Hz Max. output current: 2400 A RMS Max. open-circuit voltage: 10 V Interfaces: RS-232, RS-485 Inputs include: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Condition: Fully functional. Visual condition matches the photos – normal signs of use. The power cord has been repaired (insulated area visible in the photos). The repair does not affect the operation of the device, but this information has been included for full transparency of the sale.

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Swap Body Turntable Trailer – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Additional 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Blodpfx Amsi Riz Hszek Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Spare wheel holder for 1 spare wheel including wheel fastening kit, basket design Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension BPW disc brake axles Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit WABCO EBS electronic braking system with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Electrical System 24 V electrical system 4 × three-chamber rear lights 1 round reversing light 1 round rear fog light Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Certification Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: used, machine/vehicle number: WFDFLT21802026297, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Fliegl ZWP 180 Standard – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Swap Guard – swap body positioning guide, mounted in front of and behind each container locking point 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Side underrun protection positioned further inwards for optimum clearance to swap body support legs Steel rear underrun protection Shortened underrun protection for optimum clearance to swap body support legs Protected installation of the lighting system Bsdpfx Aei Ri Dzjmzolk Quarter fenders at the front and half fenders at the rear Without rear impact protection Spare wheel holder in basket design Plastic toolbox Drawbar Drawbar length: 2,200 mm Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit EBS electronic braking system with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Brake release function via push button on the vehicle next to the raise/lower valve, allowing brake release when coupled (EBS power supply must be ensured) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Equipment Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder Warning board according to ECE R70 Foldable ADR warning board at the rear ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: used, machine/vehicle number: WFDFLT21801006610, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2017, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Fliegl ZWP 180 Standard – 2-Axle Swap Body Trailer Weights and Dimensions: Gross vehicle weight: 18,000 kg Payload approx.: 15,380 kg Axle load: 18,000 kg Unladen weight (basic version): approx. 2,620 kg +/- manufacturing tolerance Overall length with 7,450 mm swap body: approx. 9,470 mm Overall width max.: 2,550 mm Frame height lowered: approx. 1,180 mm Frame height raised: approx. 1,380 mm Frame height driving position: approx. 1,260 mm Support height: approx. 1,220–1,320 mm Standard front stop to front locking point: approx. 800 mm Locking distance: 5,853 mm Coupling height: approx. 800 mm Drawbar length (adjusted): approx. 2,200 mm Free drawbar length from front stop for 7,450 mm swap body: approx. 1,970 mm Support heights apply on level ground. Note: Steering through is not possible in lowered position. Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Quick-release connection for Anti-Ice system at the front Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container twist locks with heavy-duty outriggers on 20" base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Bodpfxezlfwce Amzolk Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter fenders at front and half fenders at rear Without rear impact protection Spare wheel holder for 1 spare wheel including wheel fastening kit Drawbar Drawbar with certified 50 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension Disc brake axles (manufacturer’s choice) with 430 mm brake discs Air suspension Braking System Dual-line air brake system Air reservoir capacity: 208 litres Spring parking brake Duomatic connection at front with connecting line to tractor unit EBS electronic braking system with front EBS connector and connecting cable Note: Trailer may only be operated with towing vehicles ensuring ABS functionality Raise/lower valve with holding function in raised and lowered position Brake pad wear indicator via EBS CAN bus signal (display in cab, truck preparation required) Axle load detection via EBS CAN bus signal (display in cab, truck preparation required, not a calibrated scale) Tyre pressure monitoring system via EBS (truck preparation required) Additional air connection front left at container cross member for Anti-Ice system Wheels & Tyres 385/65 R22.5 tyres Polished aluminium wheels, Speedline Electrical System 24 V electrical system LED multi-chamber rear lights Yellow LED side marker lights LED licence plate lighting Note: Certain towing vehicles may display incorrect fault messages although the system is functioning correctly. 2 LED white front position lights 2 LED red/white rear outline marker lights 1 × 15-pin front connector with connecting cable, including power supply for Anti-Ice system on swap body Additional rear LED work light, activated via reverse light Additional front LED work light centrally mounted between the chassis beams, illuminating to the rear, activated via reverse light Registration & Certification Country of registration: Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour marking with white reflective strips on sides and red reflective strips at rear Paint Finish Chassis: RAL 9011 Graphite Black

Condition: used, machine/vehicle number: WFDFLT21801005232, empty load weight: 2,650 kg, maximum load weight: 15,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation. Fliegl ZWP 180 Standard – Specifications #Chassis – Swap Body Turntable Trailer Fine-grain steel welded chassis Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers 4 container twist locks with heavy-duty outriggers on a 20' base Suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Without rear impact protection #Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles & Suspension SAF disc brake axles Air suspension #Braking System Dual-line air brake system Spring parking brake Two colour-coded front coupling heads with connecting lines to the tractor unit Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Bledpfxezldqhe Amzjk Raise/lower valve with holding function in both raised and lowered positions #Wheels & Tyres 385/65 R22.5 tyres (manufacturer's choice) Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 2 × 7-pin front connectors with connecting cables Additional LED work light at the rear, activated via the reverse light #Registration & Certification Approved for registration in Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective tape on the sides and red reflective tape at the rear

Condition: used, machine/vehicle number: WFDFLT33802021791, empty load weight: 6,433 kg, maximum load weight: 28,567 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", color: black, Please note: The images shown are archive photos. The vehicle may still be in operation. ## Fliegl Mega Curtainsider Semi-Trailer Chassis: Lightweight fine-grain steel chassis, replaceable 2" kingpin, Load-Lock outer frame, 24 t JOST two-speed landing gear, rear access ladder, door retainers, aluminium side underrun protection, galvanised rear underrun protection, quarter mudguards, anti-spray mud flaps, Heavy Blocker rear impact protection with side roller buffers, heavy-duty pallet stop, spare wheel carrier, lockable toolbox with drawer, document box. Axles & Suspension: BPW drum brake axles (8-stud hubs), laser wheel alignment, mechanical hubodometer, air suspension, automatic lift axle with forced lowering and traction aid (activated by brake pedal or manual switch). Brakes: Dual-line air brake system, spring parking brake, WABCO EBS, lift/lowering valve. Raising the lift axle increases loading/overall height by approx. 50 mm. Tyres: 445/45 R19.5 (manufacturer's choice). Electrical: 24 V LED lighting, LED side markers, LED front position lights, LED rear outline lights, 2 × 7-pin and 1 × 15-pin front sockets. Floor: Approx. 30 mm plywood floor with Omega-reinforced joints, suitable for forklift axle loads up to 7,100 kg. Front Wall: 2,580 mm high, steel corner posts, curtain release system, internal steel impact protection, additional 1,250 mm plywood lining. Centre Posts: 3 pairs of full-length sliding posts with multiple locking positions. Side Slats: Aluminium or timber V-slats. Bsdpszlciiefx Amzelk Rear: Steel rear corner posts, double rear doors with internal locking bars, curtain tensioning system. Curtains: Reinforced curtains with welded horizontal and vertical straps, stainless steel buckles. Roof: Sliding roof, rear end lift, automotive L-roof rails, hydraulic lifting roof on both sides (+400 mm), rain gutter at rear. Certification: DEKRA approval, EN 12642 XL load securing certificate, VDI 2700 Sheet 12 beverage transport certification, ECE R70 rear warning plate.

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Trailer Stability Control System #Wheels & Tyres 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Four-way insert pockets Additional long lower pockets Bjdpfx Aezlcdgemzslk 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Folding "A" warning plate for waste transport Rear night parking sign

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,997 kg, first registration: 05/2016, loading space length: 6,900 mm, loading space width: 2,480 mm, color: red, Year of construction: 2016, Axle brand: BPW 10-ton drum axle Front axle: Max. axle load: 10,000 kg; Steerable Blodpeziz Dtsfx Amzjk Maximum rear axle load: 9,997 kg Unladen weight: 3,880 kg Payload: 16,200 kg GVWR: 20,000 kg Loading platform height: 112 cm Technical condition: good Optical condition: good