Used Forestry Mulcher for sale (213)

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, Year of construction: 2026, Equipment: air conditioning, all wheel drive, crane, TECHNICAL CONSTRUCTION DESCRIPTION KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: Todezdl Sdepfx Ahmoc The vehicle is from the 2019/2020 production year. Inspection/Initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting, and transport work in rough terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot TERRAIN CAPABILITIES ? Gradient climb: up to 60% ? Side slope: up to 40% ? Wading depth: up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Ideal for work off paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Continuous slewing system ? Hydraulic six-section boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Special forestry work ? Work in moorlands and nature reserves ? Disaster relief and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the PALFINGER PK 23002 SH E Power Link Plus mounted on it combines maximum off-road performance with powerful crane technology. Due to the extremely low ground pressure, the high payload, and the reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, High-capacity funicular mounted on a MAN 6x4 chassis truck - Maximum working length, line of 2,000 m - MAN 400 CP truck chassis - 12 m tower equipped with 6 hydraulic anchors - Possibility of mounting the funicular in the lower position (valley) or in the upper position (mountain), in other words, the funicular can pull logs from top to bottom or from bottom to top - Trolleys with 50 m cable reserve (for easy manipulation), verbally activated with remote control station + 2 additional Trolleys - Various spare parts - The machine is registered in Romania and can be driven on public roads - Good working condition. It was used very little. Purchased from the Austrian Forestry Directorate. Installation in very good working condition. Tedpst Nf Ipofx Ahmoc Belwo you can find our offer for VOLVO L180E. For this machine, no professional description is needed, as you can see all the details in the attached photos.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane Todpfjzgzavjx Ahmoc ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: used, Year of construction: 2019, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at…). Ressenig SATL2-400.1 – extendable forestry machine low-loader, used in excellent condition – extendable semi-trailer low-loader with 2 hydraulically steered 12-ton axle lines. Todpfxsyfrxno Ahmec Manufacturer: Ressenig (Austria), low-loader bed length: approximately 5,500 mm when retracted, approximately 8,500 mm when extended, initial registration: 05/2019, permissible total weight: 42,000 kg, fifth-wheel load: 18,000 kg, rear axle load: 24,000 kg, overall length: approximately 12,860 mm when retracted, approximately 15,860 mm when extended, unladen weight: 13,180 kg, payload: 28,820 kg, width: 2,550 mm, axles: DL-S axle lines, 12 tons, Tridec – single-wheel suspension, hydraulically sprung, hydraulically steered, remote control for steering and air suspension, tires: 245/70 R 17.5, braking system: BBA – compressed air, EBS, spring brake on both axles, low-loader bed: extendable by 3 meters from 5.5 m to 8.5 m, ramps: electro-hydraulic, other equipment: yellow rotating beacon, spare wheel, aluminum bridges for insertion into the extended low-loader bed, red/white pull-out signs for oversized transport. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel.…) will be happy to assist you. You can find more information on our website. … Errors, changes, and prior sale reserved!!! = More information = Please contact Tobias Ebert for further information.

Condition: new, Year of construction: 2026, Engine power: 14 HP Splitting force: 20 tons LONCIN engine Starting: Puller and key Operating pressure: 18 - 20 MPa Cylinder: Ø101.6 x 610 mm Maximum log diameter: 500 mm Maximum log length: 610 mm Cycle time: 6 - 8 s Return time: 3 s 6-arm splitting wedge 22" STHIL guide bar 74-link chain, 0.75 mm Saw/splitter drive: hydraulic motor/gear pump Ejector length: 3.2 m Conveyor belt (outfeed belt): 6800 x 250 x 4 mm 13" tires Engine oil: 0.8 L (10W30/10W40) Hydraulic oil 30 - 35 L (HL46) Tsdozx Amzopfx Ahmsc Hydraulic pump efficiency 81% Shipping dimensions (W x L x H) 2150 x 1000 x 1200 mm Machine dimensions 6400 x 1200 x 2200 mm Gross weight 650 kg Features: Splitting force of 20 tons – effective splitting of larger and harder logs. Combustion engine – independence from the electrical grid, suitable for field use. Hydraulic feed and pressure – stable material guidance and safe operation. Hydraulic cutting and splitting – one machine for two key stages of wood processing. Sturdy construction – durable and stable frame for intensive use. Ergonomy and comfort of use – convenient settings and intuitive operation facilitate everyday use. Universal use – suitable for farms, forestry work and professional woodworking.

Condition: used, functionality: fully functional, power: 14 kW (19.03 HP), fuel type: diesel, empty load weight: 654 kg, Year of construction: 2023, operating hours: 85 h, machine/vehicle number: H100D202801, Equipment: all wheel drive, Etesia HVHPX all-wheel drive with high dump in very good condition, only 85 hours. Unfortunately, the mower has become too small for the area we now need to maintain. The machine is in excellent, nearly new condition. With a locking wedge, the mower can be converted to a mulcher; this component is included in the scope of delivery. Tedpfewgwg Iox Ahmsc

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), first registration: 09/2015, fuel type: diesel, color: red, axle configuration: 4x4, operation weight: 1,500 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Year of construction: 2015, operating hours: 2,398 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, Self-propelled work machine, mower: + Toro + Groundsmaster 360 + Year of manufacture: 2015 + 2,398 operating hours + 4-cylinder Kubota diesel engine, 1,498 cc, 35 HP + All-wheel drive + Selectable all-wheel steering + Hydrostatic drive, max speed 20 km/h + Front and mid-mount lift arms + Front hydraulics + PTO (power take-off) + Beacon lights + Full cab with opening windows + Air conditioning / heating Tedpfx Asx E R Enjhmoc + Hand throttle + Toro rotary mower deck with 3 blades, 180 cm cutting width Optional: + Müthing front mulcher + Type MU-FM + 160 cm working width + 240 kg + Year of manufacture: 2015 Municipal vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos excepted, subject to prior sale!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 313 h, power: 114 kW (155.00 HP), fuel type: diesel, maximum speed: 50 km/h, first registration: 01/2024, next inspection (TÜV): 07/2029, color: green, overall weight: 6,500 kg, front tire size: 540/65R28, rear tire size: 650/65R38, motor manufacturer: AGCO Power, gearing type: mechanical, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, trailer coupling, Valtra N155 Forestry – Top-spec – 50 km/h – Front PTO – Olive Green Metallic For sale is a very well-maintained Valtra N155 forestry tractor in the exclusive olive green metallic paint finish. The tractor impresses with its extensive equipment and is ideally suited for both forestry and agricultural applications. Technical data: Manufacturer: Valtra Model: N155 Forestry First registration: 2024 Power: approx. 114 kW / 155 hp Fuel: Diesel Emission stage: Stage V Transmission: DPS Power Shuttle 30/30 Maximum speed: 50 km/h Total weight: 6,500 kg Next §57a/TÜV inspection: 07/2029 Tires: Front: 540/65 R28 Alliance Forest Tsdpfx Ahozi Erbsmjc Rear: 650/65 R38 Alliance Forest Equipment: Cab with automatic climate control and footwell heater Front hydraulics and front PTO Rear linkage HD 4 hydraulic rear control valves Power Beyond 2 hydraulic front control valves Automatic trailer hitch (38 mm pin) Premium work lights 2 yellow rotating beacons Forestry equipment Roof-mounted work light and extensive lighting system The tractor is in very good condition and is ready for immediate use. Viewings are possible at any time by appointment.

Condition: used, mileage: 1 km, color: red, empty load weight: 760 kg, driver cabin: other, gearing type: other, Year of construction: 2023, * Mechanical mulcher, drive on the right * Suitable for vehicles with a power output of 40 kW / 54 HP or more * Chain curtain * Hydraulic flap with counter-cutting blades * Standard color: Prinoth red * Housing lining * Lining with two rows of counter-cutting blades * Rotor: 450 mm diameter, 1450 mm wide, 30x BCS03 tools * Mechanical drive (PTO operation) * PTO speed 540 rpm, gear ratio i=0.4 * Skids, height-adjustable in 3 stages * Presser bar, hydraulically adjustable * Tractor connection: 3-point linkage, CAT 2 * With mechanical/manual side adjustment * Extra-strong PTO shaft * Hydraulic hoses including connectors * 2x adapter for AEBI TT mounting * Reinforced chain curtain with parallel plates Other: * Trade-in and purchase of vehicles and machines possible. * Selling price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer is non-binding. Tjdpfszlucnsx Ahmoc * Photos may differ. Price applies to the existing condition. * All information without guarantee.

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, total length: 10,520 mm, total width: 2,300 mm, total height: 3,990 mm, suspension: air, tire size: 385/65-22,5, color: green, Year of construction: 2026, Equipment: ABS, - EBS Tedpfx Asz Hkcqohmec Brand new at PAVIC. Available immediately! PAVIC 3-axle 55m³ tipping trailer with lift axle Technical specifications: Coupling height: 1250 mm Length: approx. 10,522 mm Width: approx. 2,300 mm Height: approx. 2,380 mm Technical axle group load capacity: 27,000 kg Technical kingpin load capacity: 12,000 kg Unladen weight: 8,520 kg CHASSIS: Heavy-duty and extra-durable I-beam main frame; manufactured from high-strength MC700 steel, welded using an automatic robotic welding process. BODY: Capacity: 55 m³ Floor plate: HARDOX450, thickness 5 mm Side walls: HARDOX450, thickness 4 mm Front wall: HARDOX450, thickness 4 mm Rear door: HARDOX450, thickness 4 mm A resonator/vibrator is installed under the structure at the front to help loosen stuck bulk materials when tipped (see pictures). TIPPER BODY: Tipping body with hydraulic tailgate. Suitable for agriculture, forestry, recycling (scrap), and more. HYDRAULIC CYLINDER (LIFT): Heavy-duty hydraulic cylinder (brand HYVA – C), single-circuit AXLES: 3 × 9-ton SAF CD (BI9–22S) axles with disc brakes (SBS2220) SUSPENSION: Air suspension. LIFT AXLE: Automatic lift axle on the 1st axle. TYRES: 6 × 385/65R22.5 (premium brand tires) WHEELS: 6 × steel rims BRAKE SYSTEM: WABCO braking system 2-line brake system according to EU regulations EBS 2S/2M Pneumatic parking brake 1 × yellow air coupling 1 × red air coupling 1 × brake pressure valve TPMS (tire pressure monitoring system) KINGPIN: 1 position, 2” (brand JOST or SAF) LANDING LEGS: Mechanical aluminum landing legs. Each leg is operated via its own locking device (after coupling). ELECTRICAL SYSTEM: Voltage: 24 V 2 × 7-pin and 1 × 15-pin ISO connectors EEC-compliant lighting as standard: SAE tail lights Side marker lights Brake warning lights Rear signal lights Lighting ASPÖCK (EUROPOINT III): 2 combination tail/brake lights (red) 2 combination indicator lights (orange) 1 license plate light ACCESSORIES: 6 × mudguards 2 × mud flaps 2 × reflective tapes and reflective plates, rear and side 1 × rear underrun protection 2 × wheel chocks with holders 1 × side aluminum protection 1 × toolbox 1 × working platform (painted and bolted) 1 × rollable tarpaulin (including mechanical support bar) PAINTWORK: Before painting, surfaces are smoothed and then cleaned. Then: sandblasting according to SA 2.5, followed by: 2 coats of primer 2 coats of acrylic topcoat RAL colors: Chassis (KTL): black Body: green (similar to RAL 6016 yellow green) For further inquiries, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes. General information Year of manufacture: 2026 Axle configuration Tire size: 385/65-22.5 Brakes: disc brakes Suspension: air suspension...

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Further information Tedszwa Imspfx Ahmec New: No

Condition: used, mileage: 28,700 km, power: 220 kW (299.12 HP), first registration: 05/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,800 mm, total width: 2,550 mm, total height: 3,780 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,600 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, Year of construction: 2024, Equipment: tail-lift, General Information Number of doors: 2 Applications: Agriculture, cleaning, construction, demolition, land drainage, drainage, earthmoving, forestry, fruit farming, land management, horticulture, internal logistics, livestock farming, mining, parking management, recycling, road construction, and field cultivation Tjdpfoyx E Uwex Ahmsc Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Maximum front axle load: 7,500 kg Maximum rear axle load: 11,500 kg Weights Curb weight: 8,121 kg Payload: 10,879 kg Gross vehicle weight: 19,000 kg Functional Tail lift: Dhollandia, rear tailgate, 2,000 kg Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: used, Year of construction: 2024, front tire size: 0%, rear tire size: 0%, We are selling a used Reform Metrac H 75 from year 2024 with approximately 830 operating hours and around 4,000 kilometers. Price does not include front mulcher, which can be purchased separately. Further details available upon request by email or phone. Storage location: 93095 Hagelstadt. Tedpfsyq Axpsx Ahmsc

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Greentec HS 212 Branch Cutter / incl. MS08 adapter plate / NEW unit / in stock & immediately available Price: €6,290.00 net / €7,485.10 gross - Working width: 2,100 mm - Cuts per minute: 250 - 450 - Max. branch diameter: 60 mm - Oil flow: 50 l/min - Pressure: 190 bar - Working speed: 5 km/h - Weight: 132 kg Optional: Flow divider with pressure relief valve - freely adjustable (50-90 l/min at 190 bar) = €660.00 net Description: - Clean and smooth cut of small branches and larger limbs up to max. 60 mm diameter - Sturdy frame beam made of high-strength steel - Lightweight construction - Low weight and flat housing for optimal visibility - HIGH-POWER blade drive via planetary gearbox with constant torque during direction changes - 100% linear blade movement thanks to a cast iron constant power motor - Max. 450 cuts per minute - PRO CUT blade (Made in Germany) - Fine-toothed double-cut blades (ground on both sides) increase both the surface quality and the working capacity - Special blade guide made of wear-resistant plastic ensures smooth operation and long service life - Blade fingers with branch-saving function = remaining branches are not damaged - Long service life thanks to hardened and galvanized material - Easy and quick blade change - Sliding skid prevents damage from ground contact - Minimal wear and low maintenance - High working speed up to 5 km/h - Variable mounting position of the blade bar - Required hydraulic connections: 1x DW (1x supply + 1x return) Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Greentec products that are immediately available! Mr. Herden (tel. number) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. Tjdpfx Aozk S Tbehmoc We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application forestry Please contact Marius Herden for more information.

Condition: new, Year of construction: 2026, The CORMAK S910 band sawmill is a technologically advanced machine designed for professional cutting of large-diameter logs. Powered by a 22 HP petrol engine, this wood sawmill is ideal for locations without access to mains electricity, while maintaining high cutting precision and efficiency. The machine is suitable for both mobile sawmills and wood processing facilities. Main Advantages The RATO R670 22 HP petrol engine provides complete independence from the electrical grid. Maximum cutting width of 910 mm without guides. Maximum cutting width of 750 mm with guides. Maximum cutting thickness of 475 mm allows the processing of large-diameter logs. The four-column construction ensures stable guidance and low vibration levels. Dynamically balanced cast-iron drive wheels ensure precise and smooth blade operation. The cooling and lubrication system protects the blade against overheating and extends its service life. Manual feed and cutting unit height adjustment allow the machine to be adapted to different types of wood. Construction and Technology Tedpfszzxqnex Ahmsc The CORMAK S910 is built on a reinforced bed made of steel profiles and features a four-column cutting unit guidance system, providing high rigidity and cutting precision even during prolonged operation. The 35 mm wide and 4000 mm long bandsaw blade operates at a speed of 17 m/s, producing a kerf of only 1.4–2.2 mm, which significantly reduces material waste. Cutting Precision and Efficiency The blade height can be adjusted from 47 mm to 740 mm, allowing the log to be precisely divided into multiple sections. The 6000 mm track length makes it possible to process even very long workpieces. A solid guide and adjustable stops stabilize the material being processed, positively affecting cutting repeatability and quality. Applications The CORMAK S910 wood sawmill is designed for use in mobile sawmills, wood processing plants, forestry operations, and companies producing sawn timber. It is ideally suited for cutting both softwood and hardwood. Standard Equipment High-performance RATO 22 HP petrol engine 4000 × 35 mm bandsaw blade (included free of charge with purchase) 6 m long track Cooling and lubrication system Log clamping system with adjustable stop Bandsaw blade guard Optional Equipment Additional track sections Spare bandsaw blades Cutting height measurement system Manual or automatic longitudinal feed Technical Specifications Specification Value Engine type Petrol Engine power 22 HP Starter Electric Max. cutting width without guides 910 mm Max. cutting width with guides 750 mm Max. blade height 770 mm Min. blade height 47 mm Max. cutting thickness 475 mm Cutting length 6000 mm Bandsaw blade guard Yes Blade width 35 mm Blade length 4000 mm Flywheel diameter 470 mm Flywheel width 25 mm Blade speed 17 m/s Kerf 1.4–2.2 mm Coolant tank capacity 12 l Feed Manual Machine dimensions (L × W × H) 6000 × 1980 × 1810 mm Net weight 520 kg

Condition: used, functionality: fully functional, power: 18 kW (24.47 HP), overall weight: 1,600 kg, fuel type: diesel, color: green, axle configuration: 4x4, maximum load weight: 500 kg, empty load weight: 1,100 kg, fuel: diesel, gearing type: hydrostat, suspension: steel, Year of construction: 2018, operating hours: 1,041 h, Ride-on mower: + Amazone + PH 1250 Profihopper 4WDi + Year of manufacture: 2018 + 1,410 operating hours + Flashing beacon + 4-cylinder Kohler diesel engine, 24 hp, 1028cc + All-wheel drive + Hydrostatic transmission (max. speed 12 km/h) + Rear-wheel steering + Lighting + High-dump function + Conveyor auger + Mulcher with feeler wheels & Y-hammers + 2775mm x 1482mm x 1994mm (l x w x h) Tsdpfxez Eq Rfo Ahmsc + Unladen weight: 1,100 kg; permissible gross weight: 1,600 kg + Municipal equipment, from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Year of construction: 2018, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Westtech Woodcracker C250 / Tiltator / Grapple / immediately available / Year of manufacture: 2018 / Top condition! Price: 19,990.00 € net / 23,788.10 € gross - Cutting diameter softwood (mm): 330 - Cutting diameter hardwood (mm): 280 Tedpfx Ahsznrutemsc - Grapple opening (mm): 930 - Shear opening (mm): 450 - Self-weight (base – fully equipped) (kg): 580-970 - Recommended flow rate (l/min.): 50-100 - Recommended flow rate for auxiliary functions (l/min.): 35-50 - Recommended operating pressure (bar): 280 - Service weight of carrier vehicle * (t): 7-15 Equipment: - incl. Tiltator, infinitely rotatable - incl. Grapple - incl. Autospeed function - incl. Multigrip integrated We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Westtech Woodcracker range! Errors and prior sale excepted! Internal No.: 318367 = Further information = New: No Part suitable for: Application in forestry Please contact Marius Herden for more information.

Condition: used, mileage: 3,890 km, power: 230 kW (312.71 HP), first registration: 05/2020, fuel type: diesel, overall weight: 11,900 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, compressor, crane, soot filter, Unimog with crane and optional front-mounted flail mower Original mileage: 3,900 km Like new Unimog U 423 Year: 2020 Crane: MKG 230 Front mounting plate Tilting cylinder Torsion frame Dual-circuit hydraulics Camera system Crane MKG Grab and swivel servo control Winch on the crane Elevating work platform Inspection performed according to the latest standards Option: Tedpfsi R Aikox Ahmoc Dücker UNA 500 Branch cutter Mulcher

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush Tjdpfsupiapsx Ahmec - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Holp CutWheel / CW.149.140 / incl. MS10 mounting / HARDOX / NEW / in stock & immediately available Price: €18,590.00 net / €22,122.10 gross - Suitable for excavators: 12 – 17 t - Own weight approx.: 670 kg - Cutting material diameter (cutting direction): 3 – 50 mm - Cutting material diameter (sawing direction): 50 – 200 mm - Cutting width: 1,360 mm - Cutting height above ground: 150 mm - Oil flow: 100 – 110 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 80 – 100 rpm Advantages of the Holp CutWheel: - Clean cutting of all types of wood due to adjustable counter blade - Significantly more economical operation as less manpower and fewer machines are required, while maintaining a high level of operational safety - 3-in-1 functionality: cutting (3 mm to 50 mm), sawing (50 mm to 200 mm), and piling of cut material - Work at heights up to 8.5 meters with a 10-tonne excavator and up to 10 meters with a 15-tonne excavator Tsdpfsynrhzjx Ahmoc - The cutting wheel operates in two directions and easily handles diameters from 3 mm to 20 cm - High robustness (cutting wheel made from fine-grain steel) - Cutting and sawing direction as well as diameter are adjustable from the cab without interrupting the work process, which also ensures greater safety - Significant savings as the CutWheel on the excavator replaces a platform lift – thus, the CutWheel replaces various machines and manual labor - The robust design also allows for pushing material lying on the ground, similar to a broom - As the CutWheel does not saw but pinches the wood in both cutting directions, wood fibers are not torn out as with a conventional saw blade. This results in a smooth cutting surface, preventing fungal infestation - Three hydraulic connections are required: Double-acting work line for cutting/sawing blades 1 x leakage oil We have many other Holp products available for immediate delivery in our warehouse! Mr. Herden (phone) will be pleased to assist you. Upon request, we are happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Subject to errors and prior sale! New: Yes Empty weight: 670 kg Part suitable for: Forestry applications Please contact...

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Holp CutWheel / CW.099.110 / incl. MS08 mount / HARDOX / NEW / in stock & immediately available Price: €14,290.00 net / €17,005.10 gross - Suitable excavators: 7 – 11 t - Own weight approx.: 490 kg - Cutting material diameter (cutting direction): 3 – 50 mm - Cutting material diameter (sawing direction): 50 – 170 mm - Cutting width: 1,000 mm - Cutting height above ground: 100 mm - Oil flow rate: 50 – 60 l/min - Hydraulic pressure: 180 – 200 bar - Recommended knife rotation speed: 100 – 120 rpm Advantages of the Holp CutWheel: - Clean cuts on all types of wood thanks to the adjustable counter-blade - Significantly more economic operation as less manpower and fewer machines are required, while ensuring high occupational safety - 3 work steps in one: cutting (3mm to 50mm), sawing (50mm to 170mm), and collecting the cut material - Work at heights up to 8.5 meters with a 10-ton excavator and up to 10 meters with a 15-ton excavator - The cutter wheel works in both directions and easily processes diameters from 3 mm to 17 cm - High durability (cutter wheel made of fine-grain steel) - Cutting and sawing direction as well as diameters can be adjusted from the cab, so work does not need to be interrupted—this also ensures increased safety - Significant savings, as the CutWheel on the excavator replaces a lifting platform—thus, the CutWheel replaces various machines and even manual labor - The robust design also allows pushing together of material lying on the ground, similar to sweeping with a broom - As the CutWheel does not saw but 'shears' the wood in both cutting directions, the wood fibers do not tear as with a conventional saw blade. This ensures a smooth cutting surface, which prevents fungal infestation - Three hydraulic connections required: Double-acting working line for cutting/sawing saw blades 1 x leak-oil return Tsdpfeynrhuex Ahmjc We have many more Holp products in stock and available for immediate delivery! Mr. Herden (phone) will be happy to advise you. On request, we can also provide you with a financing offer. We are an official sales and service partner for Holp. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Westtech. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Subject to errors and prior sale! New: Yes Unladen weight: 490 kg Part suitable for: Forestry applications Please contact us...

Year of construction: 2022, condition: used, For inquiries about the attachment, Mr. Herden will assist you (by phone). Westtech Woodcracker CL320 Felling Grapple / in stock & immediately available / Year of manufacture: 2022 / DEMO unit / like new Price: €8,890.00 net / €10,579.10 gross Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Grapple opening = shear opening (mm): 1,060 Own weight (basic – fully equipped) (kg): 620 – 1,170 Recommended main circuit oil flow (l/min): 70 – 150 Recommended main circuit operating pressure (bar): 280 Recommended auxiliary circuit oil flow (l/min): 45 – 60 Recommended auxiliary circuit operating pressure (bar): 200 Carrier vehicle operating weight (t): 12 – 20 We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. Our warehouse holds a wide selection of various Westtech products, all immediately available! Mr. Herden will be happy to assist you (by phone). Upon request, we can also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Tjdpfxjyix N Uj Ahmjc With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Errors and prior sale excepted! Internal ref. no.: 121059-F = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further information.

Condition: used, Year of construction: 2024, operating hours: 206 h, JCB 270T S5 Compact Track Loader Forestry cab armour (ideal for mulching operations!) Only 206 operating hours! Year of manufacture: 2024 Rubber tracks 450 mm (86 mm pitch x 56 links) 74 hp / 55 kW JCB turbo engine 2 speed ranges LED headlights front and rear Cab door opens rearward sideways for easier entry and exit Cab with heating and air conditioning Reversing alarm Radio and speakers Landscaping bucket 2,134 mm wide (0.64 m³) Industrial pallet fork carrier Smooth Ride System Hydraulic quick coupler Immediately ready for use; a wide range of additional attachments in stock. Viewings by appointment are expressly requested. We are happy to provide you with a leasing or financing offer on request. Mr. Mihm (phone) will be happy to assist you. Further information is available on our website. Errors and prior sale excepted! Quick Coupler System = Further Information = Tedpfxjyfrgfo Ahmsc Drive: Track Please contact Tobias Ebert for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 12/2024, total length: 78,000 mm, total width: 25,500 mm, total height: 35,800 mm, suspension: air, tire size: 365/65R22,5, wheelbase: 6,040 mm, color: white, Year of construction: 2024, General Information Applications: Construction, Demolition, Earthmoving, Forestry, Horticulture, Internal Logistics, Mining, and Parking Management Registration: OV-18-FK Axle Configuration Tire size: 365/65R22.5 Axle brand: Goodyear Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Aluminium rims; Lift axle; Max. axle load: 10,000 kg Rear axle 2: Aluminium rims; Max. axle load: 10,000 kg Rear axle 3: Aluminium rims; Max. axle load: 10,000 kg Weights Unladen weight: 7,420 kg Payload: 34,580 kg Gross vehicle weight: 42,000 kg Functional Tipper: Rear Condition Technical condition: very good Visual condition: very good Product Safety Manufacturer: AJK Nederland Borkel en Schaft, NL Further information Please contact Maarten van Marion for further details. = Company Information = Tsdpfx Ahex Np Nyemsc Our complete range can be found here:

Condition: new, mileage: 420 km, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, = Further options and accessories = - Brake system = Notes = Arocs 2751 6x2 HAD - pre-equipped for forestry crane operation!! Tjdeyfqvfepfx Ahmec Front axle 9.0 t, Hydraulic Auxiliary Drive (HAD), rear axle 13.4 t, steering and liftable trailing axle 8.0 t, electronic brake system with ABS and ASR, retarder, two-line trailer brake, wheelbase 4,800 mm, stabilizer on front axle, extendable rear underrun protection, front underrun protection, compressed air connection in cab, air-suspended driver’s comfort swing seat, functional passenger seat, air conditioning, transparent external sun visor, comfort steel-spring cab suspension, M-Cab ClassicSpace, reinforced end cross member, interactive multimedia cockpit, navigation system, LED fog lights, construction rear lights, 2 low LED revolving beacons, body: Hyva-Lift roll-off tipper 20-60 Titan, hook height: 1,570 mm, container length: 4,500 mm to 7,000 mm, lifting force: 200 kN, container with crane platform, capacity: approx. 30 cbm, container length 7,000 mm, recessed hook, foldable protection roof 2,000 mm with hand pump, crane: Epsilon Q150L, crane cabin available on request, length: 9.7 m Application area: Processing and transport of cut material. We will be happy to provide you with a leasing or financing offer from Mercedes-Benz Bank on request. Mr. Ebert and Mr. Seidel (Tel. ...) will be pleased to assist you. For further information, please visit our homepage. !Subject to changes, errors, and prior sale! ESP, navigation system Cabin: Local traffic = Further information = Engine displacement: 12,809 cc Please contact Tobias Ebert for further information.