Used Frech Hot-Chamber Diecasting Machine - Vertic. for sale (69,102)

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V Ljdoyanlaopfx Am Nsaa - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: good (used), Year of construction: 2008, Year of manufacture: 2008 Control system: Heidenhain itnc 530 Gearbox, 6000 rpm 40 tools, SK 50 X-axis travel: 1,400 mm Y-axis travel: 800 mm Z-axis travel: 700 mm Lasdpsy Dfftsfx Am Nja Rated apparent power: 40 kVA Dimensions approx. Overall height: 2,900 mm Overall length: 4,000 mm Overall width: 3,500 mm Table width: 1,500 mm Table length: 800 mm Table load capacity: 1,400 kg Max. speed: 6,000 rpm Total weight: 12,000 kg Handwheel Spindle cooler Internal coolant supply 20 bar Separate tank approx. 500 l Chip conveyor Immediately available.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 170 mm, rotational speed (max.): 8,000 rpm, The machine is in good technical condition, connected and available for testing, with a 30-tool magazine and Fanuc control system. Lasdpfoy Ewwqex Am Nja

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Lasdpfxsy Avdqe Am Noa Control cabinet: 3400 x 600 x 2400 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 520 mm, table width: 460 mm, table length: 1,000 mm, The machine is in good technical condition, connected to power, with the possibility to test the Fanuc control system. Ledpfjy Evxmox Am Njaa

Condition: used, Year of construction: 2012, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 900 mm, table length: 400 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 23, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This vertical machining center, a Saeilo Contur MMV 810 S, was manufactured in 2012 and is equipped with a Heidenhain TNC 620 control unit featuring an electronic handwheel for precise operation. Travel ranges are X = 810 mm, Y = 400 mm, Z = 500 mm, with a table measuring 900 x 400 mm and fitted with 3 T-slots (size 14 mm). The machine includes a double-arm tool changer with 23 positions, BT40 tool holder, and a high-performance spindle capable of up to 10,000 rpm, oil cooling, and an internal coolant supply system with 20 bar pressure. Spindle speed: 0-10,000 rpm Axis travels: X: 810 mm Y: 400 mm Z: 500 mm Double-arm tool changer with 20 positions Tool holder: BT40 Spindle oil cooling // Internal coolant supply 20 bar Disc-type scraper in coolant tank Air blast cooling through or around the spindle External coolant gun Chip conveyor (spiral type) Central lubrication system Table clamping surface: 900 x 400 mm with 3 x 14 mm T-slots Machine weight: 3,500 kg Lajdpjx N E Acofx Am Noa Includes documentation.

Condition: like new (used), Year of construction: 2018, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 1,100 mm, table length: 3,200 mm, number of slots in tool magazine: 60, DMG MORI DMF 260/11 LINEAR 5-AXIS MACHINING CENTER (Champion) TECHNICAL SPECIFICATIONS (MACHINE IN GOOD CONDITION) Brand: DMG MORI Model: DMF 260/11 Linear 5 Axis (Champion) CNC Control: Heidenhain iTNC 530 Table Dimensions: 3200 x 1100 mm X / Y / Z Travel: 2600 x 1100 x 900 mm Table Load Capacity: 4000 kg Rotary Table Capacity: 1200 kg Machine Weight: 27,750 kg (27.5 t) Taper: DIN 2080 A-50 (ISO 50) Tool Magazine Capacity: 60 positions Spindle Speed: 10,000 rpm Blum Tool Measurement Additional equipment and maintenance performed - Internal and external air and coolant supply, through the spindle via M function (40/80 bar) - Upper external air cooling (chip evacuation for higher chip volume via M function) - Spindle vibration control module - Preventive maintenance up to date, oil changes, filters, coolant, performed as per manufacturer’s specifications or based on usage Ledpfx Asytrzxem Njaa - Y-axis spindle replaced at 9,256 hours - Belleville washers replaced at 13,903 hours - Mechanical tool setter with option to install Blum laser (Includes laser) - DMG probe - 3D QuickSET - Coolant gun - X-axis linear drive - Basic machine dimensions: Length mm: 8,600 Width mm: 5,800 Height mm: 3,200 - Chip conveyor

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,700 mm, total length: 3,000 mm, total width: 2,250 mm, table width: 550 mm, table length: 700 mm, rotational speed (max.): 42,000 rpm, overall weight: 5,200 kg, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, rotational speed infinitely variable, 2 Röders machines in excellent condition available from toolmaking operations. - new software - complete maintenance - full documentation Lajdpfx Aoy At S Sem Nja - some spare parts - loading possible

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 5,500 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 380 mm, Model: COMET ISOLA ES381 V06 Year: 2004 Control: ISAC Laedpfxeyx Hn Se Am Nja ‘X’ axis Stroke: 5500mm ‘Y’ axis Stroke: 525mm ‘Z’ axis Stroke: 380mm Spindle Taper: ISO 40 Spindle Speeds: 24,000 RPM

Condition: used, Year of construction: 1998, x-travel 1.020 mm y-travel 510 mm z-travel 510 mm control MSC 501 Fanuc table surface area (APC) 1.200 x 480 mm max. table load (APC) 550 kg turning speed range - milling 10.000 U/min power capacity - milling spindle 22 / 18,5 kW tool taper BT 40 number of toolpositions 30 pos. tool taper BT 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse 32 m/min Ljdpoy Apcysfx Am Njaa feed 1 ~ 16.000 mm/min Tipp feed 0 ~ 1.260 mm/min spindle bearing diameter 85 mm total power requirement 59,5 kVA weight of the machine ca. 6,9 t dimensions of the machine ca. 3,9 x 2,7 x 2,9 m CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT included in the scope of delivery

Condition: used, WEBSTER & BENNETT DOUBLE COLUMN VERTICAL BORING MACHINE Model 120” ‘DCM’ Serial number 5914-1 Year 1970 Diameter of faceplate 108” 2743 mm Diameter of work turned with ram 120” 3048 mm Max. diameter turned for full travel of turret slide114” 2895 mm Diameter of work admitted 122” 3100 mm Height from faceplate to underside of cross-slide78” max. 1981 mm 24” min. 609 mm Vertical travel of ram 48” 1219 mm Vertical travel of turret slide 38” 965 mm Horizontal travel of ram or turret slide (Table centre outwards) 66” 1676 mm Minimum distance between centre of ram and turret slide (dependent on tooling) 30” 762 mm Laedpsyyzxusfx Am Nja Centre to face of cross slide 17” 432 mm Smallest dia. hole toolholder and ram will enter 11 ¾” 298 mm Smallest dia. hole turret slide will enter 28” 711 mm Maximum load on table 44800 lb 20320 kg Number of feeds 12 Range of feeds .0025 - .125 ins/rev. Number of speeds 12 Range of speeds 2 - 53 rpm Main motor 50 HP Width 222” 5639 mm Front to back 186” 4725 mm Height 215” 5461 mm Approximate total weight of machine 100800 lb 45720 kg

Condition: ready for operation (used), Year of construction: 2005, A 3-axis milling machine is offered. Travels X/Y/Z: 1016mm/610mm/760mm, tool changer: 24 positions, spindle: prepared for external cooling unit. Accessories: recooling unit Rehsler TAE evo M, Renishaw measuring system, inspection by appointment possible. Lasdpfx Amsy A Sl Re Nea

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: P014TM481, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: SERIES 16i-M, total height: 2,200 mm, total length: 2,500 mm, total width: 2,000 mm, table width: 410 mm, table length: 850 mm, overall weight: 2,000 kg, number of slots in tool magazine: 14, STAMA FANUC MC 014 CNC Vertical Machining Center - Operating voltage: 400 V Frequency: 50 Hz Rated current: 17 A Laedpfxey Dcp Nj Am Nsa - Table with three T-slots The machine is equipped with a 14-position tool turret Note: The machine vice shown in the photos is not included in the scope of delivery! Note: The item must be collected between July 7 and July 9, 2026, on a date to be agreed. FCA D-71263 Weil der Stadt – loaded onto truck

Year of construction: 1995, condition: used, with backlighting and visual inspection Ledpsy Aqdrsfx Am Nsaa

Condition: used, Year of construction: 2008, travel distance X-axis: 1,300 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fagor 8055i PLUS-M, workpiece weight (max.): 8 kg, table width: 610 mm, table length: 1,440 mm, overall weight: 6,800 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, CNC machining center Brand: Pinnacle Model: LV-126 Year: 2008 Weight: 6,800 kg CNC: Fagor 8055i PLUS-M Travel (X, Y, Z): 1300, 610, 610 mm Work table: 1,440 x 610 mm Tool changer: 24 tools Maximum tool weight: 8 kg Lodoy Axdgspfx Am Nsaa Spindle speed: 8,000 rpm Taper: ISO 40 Linear guides: Class P, 45 mm width Ballscrew: 40 mm, C3 precision Axes: 3 Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Visits can be arranged to view the machine on site.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO40 - Spindle power : 18,5 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560 x 430 x 510 [mm] - Rapid traverses rates (X/Y/Z) : 42 sur le X et 36 en Y/Z [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 900 x 430 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2062 x 2080 [mm] - Machine height : 2780 [mm] - Machine weight : 4800 [kg] MACHINE HOURS - Number of spindle hours : 3351 [h] EQUIPMENT - CNC : SMART - Interface : PCMCIA / RS232 - Interactive programming : Mazatrol - Electronic handwheel Lajdpfx Amouhbu Io Noa - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor - Workpiece probe

Condition: used, Year of construction: 2010, machine/vehicle number: MR006967, Used: Vertical panel saw, manuf. Elcon – price is ready-to-use ex Staphorst. On-site delivery negotiable. Technical specifications: - Maximum saw blade diameter: 250 mm Lajdjyz Ii Ajpfx Am Noa - Serial number: 911054

Condition: used, Year of construction: 1998, machine/vehicle number: MR003421, Used panel saw, manufacturer Putsch. Machine price ex Staphorst, on-site delivery negotiable. Technical specifications: - Machine number: 9814C393 Lasdpfxjyz Iive Am Nsa

Condition: ready for operation (used), Year of construction: 2010, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,000 rpm, Haas VF5/40XT milling machine from late 2010. The machine is connected and operational—ready for work, following the replacement of the X-axis ballscrew. Plexiglass door guards and side covers have been replaced with new ones. Calibration was performed using a Renishaw Ballbar; with further leveling and configuration, even higher precision can be achieved. The machine can be inspected, tested, etc. Purchase including transport, installation, training, leveling, and configuration is possible for an additional fee. Loading for transport is included in the machine price. Spindle taper: ISO40 Lajdpfx Ajy D Enhem Nea Tool magazine: 40 tools Through-spindle coolant Rigid tapping Macros Auger chip conveyor Spindle orientation X 1524 mm, Y 660 mm, Z 635 mm—the X-axis is extended in the XT series.

Condition: good (used), Year of construction: 2003, All parts shown by hand not come with machine. Laedpfxsy Ddb To Am Nsa

Condition: used, Year of construction: 2014, operating hours: 17,500 h, functionality: fully functional, Technical details: Ljdpfx Amsy A Rd Sj Noaa Travel distance X-axis: 1,020 mm Travel distance Y-axis: 600 mm Travel distance Z-axis: 600 mm Rapid traverse X/Y-axis: 36 m/min Rapid traverse Z-axis: 24 m/min Feed rate XYZ-axis: 20,000 m/min Torque: 18,500 Nm Controller System:Heidenhain iTnc530 Spindle speed (max.): 8,000 rpm Table size: 1,120 x 600 mm Table load: 800 kg Overall weight: 6,500 kg Coolant supply: 30 bar Distance table center to spindle nose: 680 mm various tool tapers: SK 40 Number of in tool magazine: 24 pcs Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm travel -y axis 560 mm travel -z axis 720 mm Lasdpsy A Tb Hjfx Am Nsa control Siemens - 840D number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 tool taper HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm travel -y axis 560 mm travel -z axis 720 mm control Siemens - 840D number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 tool taper HSK 63 Lasdpey A Tbtofx Am Nsa Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear

Condition: new, Year of construction: 2026, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery NEW PRICE LIST year 2026 WHILE STOCK IS STILL AVAILABLE I CAN GUARANTEE PRICE LIST year 2024 Super discount while stocks last 100% made in ITALY for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : F28 . surface to be heated up to m2 100/150 Lasdpfx Amsf H Hlrs Noa F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Hedelius C100 with full equipment: internal coolant supply, internal air, external air, external water, 3D probe, laser tool measurement, spindle HSK63 18000 rpm, 40 tool magazine positions, X2500mm Y1000mm Z770mm, enclosure with automatic roof, Heidenhain 530 control, Absolent extraction (maintenance-free) Ledpjy D A Dgjfx Am Nsaa