Used Gaps Q10-Mp28 for sale (821)

Year of construction: 1960, condition: ready for operation (used), Turning length: 4000mm, turning diameter over bed: 680mm, turning diameter over short cross slide: 480mm, turning diameter over long cross slide: 420mm, turning diameter in the gap: 880mm, swing diameter in the gap: 960mm, travel cross slide: 480mm, top slide: 230mm, tailstock quill: 280mm, center height over flat bed: 335mm, center height over prism top edge: 313mm, bed width: 560mm, diameter of tailstock quill: 125mm, Morse taper of center: no. 6. With upper support, steady rests, operating manual, digital readout and measuring system, Multifix tool holder. Machine is currently partially overhauled. An on-site inspection is possible. Bdjdpfx Ajylbtbshmoh

Condition: reconditioned (used), functionality: fully functional, fuel type: electric, Year of construction: 2005, Ratzinger RC 12 Impact Crusher, Bohringer RC12 + B1000 L15000 Conveyor Crusher completely overhauled Crusher mounted on a hydraulic chassis, very easy to transport. Crusher sandblasted and painted BRAND NEW conveyor L15000 Rotor diameter [mm]: 1100 Inlet [mm]: 1220x900 Maximum material inlet [mm]: 600 Crusher electric motor: 132 kW Side conveyor electric motor: 5.5 kW Main conveyor electric motor: 4.5 kW Vibrator electric motor: 7.5 kW Conveyor belt electric motor: L15000: 7.5 kW Gap adjustment [mm]: 0-20 to 0-100 - hydraulic adjustment Capacity [t/h]: 100 to 250 depending on the material and the fraction obtained Crusher equipped with a side conveyor with pre-screening Crusher weight: 31,000 kg Conveyor weight: 1500 kg Bdjdpfx Ahjy Uh Swjmjh The crusher is 100% operational and ready for operation. Crusher liners are 90% operational. The crusher has been completely overhauled, with new bearings and a new electrical system. Blow bars rotated

Condition: good (used), Year of construction: 2002, MPS – Multi Print Systems B.V. Model | EP 410 / 8 Machine type | UV Flexographic Label Printing Machine _____ Technical Data • Maximum web width | approx. 410 mm • Printing width | approx. 410 mm • Number of printing units | 8 • Printing process | UV Flexo • Drying system | UV curing system installed • Machine platform | Modular MPS EP Series _____ Bedoyvtpqopfx Ahmjdh Configuration • 8 × Flexographic printing unit • UV curing system on each print station • Corona treatment unit • Delamination / Relamination unit • Rotary die-cutting unit – GAP MASTER • Matrix stripping system • Rewind unit • Operator control console • Large tooling package included (printing cylinder, etc.)

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Bdodpszk H A Djfx Ahmsh Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Condition: good (used), Year of construction: 2008, OMET Year of manufacture: 2008 Printing process: UV flexo Condition: Used – very good condition (single owner) Location: Italy _____ Machine Configuration • 8 x UV flexo printing units • UV curing system Bdjdpfxeyyn Sns Ahmsh • 2 x die-cutting stations • 1 x Gap Master system • 1 x additional die-cutting unit for sheet-off • Sheet delivery with evacuation conveyor • Turn bar (web turner) • 3 x corona treatment units • Chilled impression cylinders with integrated chiller • Suitable for adhesive label printing _____ Equipment & Tooling • 3 sets of tooling • 10 anilox rollers • 3 magnetic cylinders _____ Technical Highlights & Advantages This OMET Flexy 330 offers a robust and versatile configuration, ideal for a wide range of label applications. Key advantages: • 8-color configuration for high flexibility • Corona treatment for improved ink adhesion • Chilled impression cylinders for consistent print quality • Well-maintained machine from single owner • Currently in production – inspection and testing possible This machine represents a cost-effective solution for converters seeking a flexible and efficient printing line. _____

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,000 × 2,000 mm Table, 1,000 mm Clear Height The machine shown here was built and delivered as a custom order. We can manufacture this machine for you on short notice – taking individual options into account. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and processing of large-format components. Base price: €102,000 net Optional Equipment (on request): The listed options are based on realized customer projects and allow precise adaptation of the machine to your specific application. The base machine is a functional standard version, which in practice is usually enhanced with additional features and project-specific configurations. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 controller with 7" touch panel - Radio remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various versions) ==== Technical Data & Information: ==== General Specifications Type: Portal Press Pressing force: 300 t (adjustable) Total weight: approx. 8,500 kg Overall dimensions (W × D × H): 3,285 × 3,020 × 3,500 mm ==== Working Area Table size: 3,000 × 2,000 mm Clear height: 1,000 mm Frame gap: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder movement: ±900 mm Portal longitudinal travel: 2,500 mm Bdedpfx Ajyxnw Uohmsh ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: lever control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Features - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Drag chain system - Two-component coating (RAL colors selectable) ===== For straightening steel structures, vehicle manufacturing, maintenance, assembly work, special constructions Portal press, straightening press, hydraulic press, 300 ton press, industrial press, metalworking Looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety regulation NR 12, which is based on these standards. Our major strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: used, Year of construction: 1994, Manufacturer: CFS Model: CookStar CKH400/8/130 Year: 1994 Condition: Used Serial Number: 138 Stock Number: 3341G Belt width: 400 mm Tiers: 2 x 4 pc. Belt length: 44 m Product gap: 130 mm Retention time: 2.5 - 75 min Bsdpfx Ahjy R Tiajmedh Temperature: max 200°C Heating: thermal oil, 300kW Exhaust: 2 x 2000 m³/h Steam: NW40, 4 - 8 Bar Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 35kW Dimensions: 8250 x 3150 x 4250 mm Weight: 12000 kg

Condition: used, Year of construction: 1971, swing diameter 0520 mm turning diameter over bed slide 400 mm turning dia. in gap 1000 mm turning length 1250 mm turning speed range - spindle 11,2 - 1120 U/min total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,7 x 1,7 x 1,7 m Machine has a 4 position toolholder with quick change device and DRO. Bedey Nd S Aopfx Ahmodh

Condition: new, Year of construction: 2026, CORMAK 410 × 1000 Universal Lathe is a conventional metalworking machine designed for precise and efficient machining in industrial facilities, machine shops, and maintenance workshops. Built with high-quality components and advanced engineering solutions, this lathe delivers exceptional reliability, repeatability, and versatility for continuous production applications. Key Features Versatile machining capabilities – suitable for external and internal turning, taper turning, metric, imperial, module, and DP threading, drilling, and boring operations. 3-axis Digital Readout (DRO) with optical scales provides precise positioning and full control of the longitudinal, cross, and top slide movements. 250 mm hardened and precision-ground cast iron bed ensures excellent rigidity, vibration damping, long service life, and machining accuracy. 52 mm spindle bore with a reinforced bearing system provides stable operation when machining larger workpieces. Direct spindle speed and feed selection from an ergonomic control panel enables quick setup and intuitive operation. Wide threading range without changing change gears – supports 42 metric and imperial thread pitches, 18 module pitches, and 21 diametral pitch (DP) threads. Removable gap bed allows machining of workpieces up to Ø580 mm in diameter. Construction and Technology The CORMAK 410 × 1000 is built around a rigid cast iron frame with a precision-machined bed, ensuring outstanding stability, long-term accuracy, and reliable operation. The spindle features a D1-6 Camlock spindle nose with an MT6 spindle taper, providing excellent concentricity and high load capacity. The headstock transmission offers 16 spindle speed ranges (45–1800 RPM), allowing optimal cutting conditions for a wide variety of materials and machining applications. Technical Specifications Specification Value 3-jaw chuck 200 mm Swing over bed 410 mm Swing over cross slide 255 mm Swing over gap 580 mm Distance between centers 1000 mm Center height 205 mm Top slide travel 145 mm Cross slide travel 225 mm Longitudinal carriage travel 750 mm Bedsiz Tf Sopfx Ahmsdh Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 Camlock Spindle taper MT6 Tool post dimensions 100 × 100 × 32 mm Maximum tool size 20 × 20 mm Spindle speeds 16 ranges (45–1800 RPM) Metric thread range 42 pitches, 0.2–14 mm Imperial thread range 42 pitches, 2–72 TPI Module thread range 18 pitches, 0.3–3.5 MP Diametral Pitch (DP) threads 21 pitches, 8–44 DP Longitudinal feed rates 17 feeds, 0.05–1.7 mm/rev Cross feed rates 17 feeds, 0.025–0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill travel 120 mm Tailstock taper MT4 Main motor power 2.2 / 3.3 kW Coolant pump power 0.1 / 0.12 kW Machine dimensions (L × W × H) 2050 × 900 × 1650 mm Net weight 1600 kg Standard Equipment 3-axis Digital Readout (DRO) with optical scales 200 mm 3-jaw chuck with internal and external jaws 250 mm 4-jaw chuck 350 mm faceplate Fixed steady rest Follow rest MT4 dead center MT6/MT4 spindle reduction sleeve Complete set of change gears Coolant system Work light Oil can Chuck key and tool post wrench Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity Six vibration isolation mounts

Condition: new, Year of construction: 2026, functionality: fully functional, Our StoStack 5000 is designed for high-performance stacking operations with medium to high throughput. The system processes up to two packages simultaneously, with a maximum length of 8 m, and offers a cycle rate of up to 30 pieces per minute without any air gap. Optionally, the machine can be equipped with an automatic spacer insertion system. This eliminates the need for an operator to insert spacers, which is particularly advantageous for integration into automated production lines. Adjustable uprights, a touch display, and extensive options for safety and automation make the StoStack 5000 a flexible solution for modern production environments. Applications: Stacking of boards Stacking of laminated timber Stacking of planed timber Stacking with/without air gap Stacking with/without intermediate spacers The advantages of the system at a glance: Fully automatic, flush stacking Fast, continuous process Precise positioning and rapid movements Simple operation via touchscreen Robust construction No pneumatics, therefore unrestricted operation even in freezing temperatures Data from timber measurement for subsequent invoicing Options: Board ejector for variable board widths and air gap (optimal for drying) Alignment rollers for longitudinal alignment of timber Ejector for removing defective boards Electrically adjustable side supports Mobile machine frame: deployment at multiple workstations by moving the machine on rails or with a forklift Technical data: Flexible stacking width: up to 1200 mm Stacking height: up to 1200 mm Board length: from 1500 mm Board/post width: 50 – 300 mm Board/post height: 15 – 120 mm Maximum board/post weight: 75 kg Maximum layer weight: 500 kg Cycle rate: up to 25 pieces per minute Bsdpfx Ahetv E D Uomjdh

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: W6378-04A, Uraca PÜV 8/200 safety valve, bypass valve, overflow valve (pneumatic and silicone-free), similar to, but not a Hammelmann, Woma, or Kamat. Permissible operating overpressure: 50-200 bar Recommended flow rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10.9 kg with MADER PEU-063-0010-I-P-M Year of manufacture: 2012 (unused) Suitable for use with demineralized water. Bedped D Aghsfx Ahmodh Electro-pneumatic control: Takes over the switching command and pressure setting of the valve. Gap seal: Ensures the exact reproducibility of the actuation pressure. Further technical data can be found in the data sheet. Maintains the operating pressure independently of the nozzle configuration. Suitable for long-term overflow operation. Excellent dynamic behavior with rapid flow changes. Special features: Very high actuation reproducibility, high actuation dynamics, cone can be used on both sides.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch Bdsdpfx Ahot Ucgaemsh - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Bjdeuddh Aepfx Ahmodh Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: good (used), Year of construction: 2003, machine/vehicle number: A 10371, Offer 25448 Technical Data: - Max. working width: 3050 mm - Max. cutting capacity (St 40): 0.5 – 6 mm - Cutting angle adjustable (motorized): 0.5 – 3° - Blade gap adjustment: manual - Number of hydraulic hold-downs: 18 pcs - Motorized backgauge with SP8 positioning control: 10 – 750 mm - Strokes per minute (depending on cutting angle and length): 9 – 17 strokes/min - Hydraulic drive: 400 V / 7.5 kW - Table height: 770 mm - Space requirement incl. backgauge, w/o front support arms: approx. W 3750 x H 1600 x D 2450 mm - Weight: approx. 4500 kg Bedpfx Asx I I Uxjhmedh Includes: - Electric foot switch - Cutting line illumination - Angle gauge - 2 support arms - Rear area protection with side guard and light curtain

Condition: excellent (used), 1) Main Welding Station – ACR6-P Type: Rotary welding station for narrow groove (Narrow Gap) Axes: 4-axis rotary system Control: Beckhoff CNC / HMI Weld monitoring: Stenning Video Weld Monitor System Approximate footprint: approx. 10,000 mm × 6,500 mm 2) Welder / Power Source Miller XMT 456 CC/CV — backup unit Type: CC/CV welding power source (MMA / MIG / FCAW / TIG – depending on equipment) Type: Multiprocessing Power supply: 400 V (via attached transformer) 3) Power Transformer Voltage: 400 V Dimensions: 970 × 760 × 1,200 mm (H) Application: powering machines in the welding station 4) Power Sockets Quantity: 3 × 415 V Mounting: on aluminium frame 5) Welding Lathe Bjdpfx Ahjx Upf Ssmsdh Dimensions: 3,000 mm × 1,200 mm × 780 mm (H) Purpose: rotary positioning of workpieces for circumferential/narrow gap welding 6) Heavy Duty Work Table Dimensions: 900 mm × 600 mm × 600 mm (H) Design: robust, industrial-grade 7) Curtains and Guarding System Welding curtains: included KEMPER system: adjustable, 50 kg, wide range of adjustment

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm Bsdpfsww Nccox Ahmsdh table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 2004, Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Year: 2004 Type: roller compactor, granulation unit for the pharmaceutical industry. Feeding screw: 0.1–180 rpm Compaction screw: 1–460 rpm Compaction zone with pressure rollers: 1–30 rpm Bodpfxex R Ar Rs Ahmedh Granulation zone with star rotor and screen: 0–180 rpm Force: 1 – 20 KN/cm Gap width: 1.0 – 6.0 mm Pressure roller speed: 1 – 30 rpm Roller diameter: 250 mm Roller width: 100 mm Capacity: 60 – 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Full electrical and technical file + program backup available. Electrical, control, and safety cabinets are not available. These items can be quoted separately.

Year of construction: 1996, condition: excellent (used), film width: 1,300 mm, Used single-layer blown film extruder for sale in excellent condition, featuring a 150 mm die diameter and a production capacity of up to 100 kg/h. Model: Queens EP-65N Processable materials: LLDPE/LDPE/MDPE/HDPE/other blends. Screw diameter: 65 mm Head: • Blown film die head • Die diameter: 150 mm Die gap: 1.2 mm Output: Up to 100 kg/h, depending on material composition • Maximum speed: 120 m/min • Winding width: 1300 mm - Flying knife roll slitting Accessories included: • Tower • Gravimetric weight control system • Masterbatch dosing unit • Calibration cage The machine can be inspected in operation. Offered with spare parts. Bdodsxrb Hmopfx Ahmsh

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Bdedsw Ew D Djpfx Ahmsh Operating manual

Condition: new, Year of construction: 2026, Industrial Universal Lathe CORMAK GOLIAT 660 × 4000 mm The CORMAK GOLIAT 660 × 4000 is a heavy-duty industrial universal lathe designed for demanding turning applications. With a 4000 mm distance between centers and a 105 mm spindle bore, the machine enables precise machining of large-size components while maintaining high rigidity and accuracy. It is an ideal solution for production plants, repair workshops, and companies specializing in the regeneration of machine parts. Main Features of the Machine 4000 mm distance between centers and 3950 mm turning length – designed for machining long shafts, pipes, and large components. Large 105 mm spindle bore – enables efficient machining of large-diameter workpieces. Heavy-duty cast iron bed – hardened and precisely ground, providing excellent resistance to twisting, vibration, and deformation. 3-axis digital readout system – ensures accurate control of carriage and slide positions. High-quality spindle bearings – guarantee smooth operation, stability, and long-term precision. Rapid feed system – longitudinal rapid feed of 4.5 m/min and cross rapid feed of 1.9 m/min significantly reduce machining time. Removable bed gap section – allows turning of oversized components with diameters up to 870 mm. Direct thread selection – enables quick adjustment of threading parameters without changing change gears. Precision and Functionality The CORMAK GOLIAT 660 × 4000 conventional metal lathe provides a wide range of machining operations, including external and internal turning, metric, imperial, module, and DP threading, drilling, broaching, and taper turning. Standard Equipment 3-axis digital readout system (optical scales) Self-centering 3-jaw chuck, 320 mm Independent 4-jaw chuck, 400 mm Faceplate, 400 mm Rapid feed system Fixed steady rest Follow rest Two fixed centers MT5 Spindle reducing sleeve Coolant system Work lighting Chuck and tool post keys Complete set of operating tools Operating manual CE Declaration of Conformity Technical Specifications Parameter Value Maximum turning diameter over bed Ø660 mm Maximum turning diameter over cross slide Ø420 mm Maximum turning diameter in bed gap Ø870 mm Bed gap length 240 mm Distance between centers 4000 mm Maximum turning length 3950 mm Spindle bore Ø105 mm Spindle taper diameter and angle Ø113 mm, 1:20 Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36–1600 RPM) Longitudinal feeds 65 ranges (0.063–2.52 mm/rev) Cross feeds 65 ranges (0.027–1.07 mm/rev) Bjdpfx Ahsvw Abgemedh Metric threads 22 ranges (1–14 mm) Imperial threads 25 ranges (28–2 TPI) Module threads 18 ranges (0.5–7 mm) DP threads 24 ranges (56–4 DP) Rapid longitudinal feed 4.5 m/min Rapid cross feed 1.9 m/min Lead screw pitch 12 mm Spindle axis height above tool surface 28 mm Tool size 25 × 25 mm Maximum compound slide travel 145 mm Maximum cross slide travel 380 mm Tailstock quill diameter 75 mm Tailstock taper MT5 Maximum tailstock quill travel 150 mm Tailstock lateral adjustment ±15 mm Main motor power S1/S6 7.5 / 9 kW, 400 V Rapid feed motor power 250 W Coolant pump power / flow rate 60 W / 25 l/min Machine dimensions (L × W × H) 5500 × 1100 × 1450 mm Machine weight 5200 kg

Condition: new, Year of construction: 2026, The CORMAK TORNADO 460x1000 universal lathe is a heavy-duty, high-precision machine designed for versatile metalworking operations, including turning, drilling, threading, and polishing, making it suitable for workshops and industrial production. Key Advantages Versatile applications – external and internal cylindrical and conical turning, drilling, reaming, polishing, and threading across a wide range of sizes. Powerful 5.5 kW motor – smooth operation even under heavy loads. Large spindle bore ø82 mm – allows machining of long and heavy shafts. 2-axis digital readout with optical scales – improves accuracy and operator comfort. Removable bridge – accommodates workpieces up to ø690 mm × 240 mm. Rigid cast-iron construction – 300 mm wide hardened and ground bed minimizes vibrations and ensures long service life. Construction and Technology The lathe’s foundation is a massive, precisely machined cast-iron bed ensuring maximum stability. The spindle, equipped with a D1-8 spindle nose and supported by reinforced bearings, provides high rigidity and smooth operation at speeds ranging from 25 to 2000 rpm. Hardened and ground gears in the spindle drive offer durability and quiet operation even under continuous use. Precision and Performance 2-axis digital readout (X & Z) – precise tool positioning with repeatable results. Joystick for rapid traverse – simplifies cross-slide and top-slide movements, reducing setup and finishing times. Thread dial indicator – easy thread engagement without manual calculation of turns. Bdsdpfxevzzffs Ahmjh Standard Equipment 3-jaw chuck 250 mm with left/right jaws 4-jaw chuck 320 mm with left/right jaws Fixed and live centers 2-axis digital readout (optical scales) Reducing sleeve MK7 → MK4 Change gears, coolant system, work lighting Fixed center MK4, lubrication system, tool set CE-compliant guards, manual (PL), declaration of conformity Optional Equipment Turret head MK4 Drill spindle MK4/B16 Drill chuck 3–16 mm / B16 HSS-Co5 cobalt drill set 1–13 mm Coolant ES-12 1L Taper turning attachment Technical Specifications Parameter Value Swing over bed ø460 mm Swing over cross-slide ø274 mm Swing in gap (diameter × width) 690 × 240 mm Center height 230 mm Distance between centers 1000 mm Bed width 300 mm Max tool post size 25 × 25 mm Total cross-slide travel 290 mm Total top-slide travel 120 mm Spindle bore ø82 mm Spindle nose D1-8 Spindle taper ø90 mm (1:20) Number of spindle speeds 12 Spindle speed range 25–2000 rpm Lead screw diameter & pitch ø35 mm × 6 mm Inch threads (TPI) 2–112 TPI (60) Metric threads 0.1–14 mm (41) Threads per inch (gear) 4–112 D.P. (50) Gear modules 0.1–7 M.P. (34) Longitudinal feed 0.054–3.04 mm/rev (42) Cross feed 0.037–2.048 mm (42) Tailstock quill travel 120 mm Tailstock quill diameter ø60 mm Tailstock gear module MT #4 Spindle motor power 5.5 kW Coolant pump motor 0.09 kW Machine dimensions (L×W×H) 2170 × 1040 × 1340 mm Net/Gross weight 1750 / 2000 kg

Year of construction: 2006, condition: like new (used), CODIMAG VIVA 340 Age: 2006 Unwinder Camera 12” and 14” IST UV dryer 5 x Letterpress 1 x Varnish Unit All 5 backpressure cylinder are new in 2021. Neue Rullers Bdodpfx Ajhhfibjhmsh Flexo UV Varnish Unit Rotary Unit with Magnetic-Cylinder and more than 1000 Magentic cutting plates GAP-Master Rewinder Complete service history by CODIMAG In Germany , in production

Year of construction: 1991, condition: good (used), machine/vehicle number: 166, Offer 22014 Technical Data: - max. working width 4080 mm - max. cutting capacity St 40 6 mm - hydraulic cutting angle adjustment - manual cutting gap adjustment - stroke rate, depending on cutting angle and cutting length, approx. 20 - 25 per minute - rear stop with positioning control ELGO, 10 - 1000 mm - cutting length adjustment - 17 hydraulic clamping cylinders - front angle stop - front support arms - Drive 400 V / 9 kW - Foot pedal - Space required without support arms, approx. W 4450 x H 1900 x D 2300 mm - Weight approx. 10500 kg Bedpfxjh N U Hpo Ahmodh

Condition: new, Year of construction: 2026, Universal Metal Lathe CORMAK 410 × 1500 mm The CORMAK 410 × 1500 universal conventional metal lathe is a professional machine designed for precision machining of shafts, bushings, threads, cylindrical surfaces, and tapered surfaces. Thanks to its large distance between centers, rigid bed construction, and extended standard equipment package — including a 20 × 20 mm indexable turning tool set and a precision MT4 live center — it provides a complete machining solution for industrial plants and professional workshops. Main Advantages of the Machine Large 1500 mm distance between centers – enables machining of long shafts and large-length components. Rigid cast iron bed and base construction – hardened and ground working surfaces minimize vibration and ensure high machining accuracy. Large 52 mm spindle bore – allows machining of pipes and workpieces with larger diameters. Precision spindle bearing system – reinforced spindle support guarantees long-term accuracy and reliable operation. Bedpforh E Smjx Ahmjdh Removable bed gap section – enables machining of components with diameters up to 580 mm. 3-axis digital readout system – optical scales provide accurate control of carriage positioning. 16 spindle speed ranges – allows precise cutting parameter selection within a range of 45–1800 RPM. Direct thread selection system – enables machining of a wide range of metric, imperial, module, and DP threads without changing gears. Standard Equipment Set of turning tools 20 × 20 mm – 7 pcs. (with indexable inserts) Precision live center MT4 6 vibration isolators 3-axis digital readout system (optical scales) 3-jaw chuck 200 mm with complete set of jaws 4-jaw independent chuck 250 mm Faceplate 350 mm Fixed and follow steady rests Fixed center MT4 Spindle reducing sleeve MK6/MK4 Complete set of change gears Coolant system with pump Work lighting Lubricator, keys, and service tools Safety guards compliant with CE standards Operating manual and CE Declaration of Conformity Technical Specifications Parameter Value 3-jaw chuck 200 mm Maximum turning diameter over bed 410 mm Maximum turning diameter over cross slide 255 mm Maximum turning diameter in bed gap 580 mm Bed gap length 190 mm Distance between centers 1500 mm Center height 205 mm Compound slide travel 145 mm Cross slide travel 225 mm Longitudinal carriage travel 1150 mm Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MT6 Tool post dimensions 100 × 100 × 32 mm Maximum tool size 20 × 20 mm Spindle speeds 16 ranges, 45–1800 RPM Available spindle speeds 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 RPM Metric threads 42 ranges, 0.2–14 mm/rev Imperial threads 42 ranges, 2–72 TPI Module threads 18 ranges, 0.3–3.5 mm DP threads 21 ranges, 8–44 DP Longitudinal feeds 17 ranges, 0.05–1.7 mm/rev Cross feeds 17 ranges, 0.025–0.85 mm/rev Tailstock quill diameter 50 mm Tailstock quill travel 120 mm Tailstock taper MT4 Main motor power (S1/S6) 2.2/2.64 kW or 3.3/3.96 kW Coolant pump power 0.1 / 0.12 kW Machine dimensions (L × W × H) 2440 × 900 × 1660 mm Net weight 1800 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm Bedpfx Ajpxmxcohmsdh - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting