Used Gea Nt50T for sale (2,122)

Condition: excellent (used), For sale: SEW-Eurodrive SF32 DT80K4 geared motor with a 0.55 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. It shows normal signs of wear and tear from use, which do not affect its performance. Technical specifications: Manufacturer: SEW-Eurodrive Model: SF32 DT80K4 Rated power: 0.55 kW Power supply: 230/400 V (Δ/Y), 3-phase Frequency: 50 Hz Motor speed: 1380 rpm Output shaft speed: 77 rpm Torque: 54 Nm Gear ratio: i = 17.55 : 1 Rated current: 3.05 / 1.75 A Protection class: IP54 Insulation class: B Mounting method: B5 Weight: 17.38 kg Power factor (cos φ): 0.77 Lubrication: CLP680 Country of origin: Germany Codpfx Ahezm Sd Eomshc

Condition: excellent (used), For sale: SEW-EURODRIVE R43DT71D4 geared motor with a 0.37 kW three-phase electric motor. The unit is fully functional, tested, and ready for use. The technical condition is very good, and it has normal signs of wear and tear consistent with its use. Its robust construction and high-quality workmanship make this geared motor ideally suited for driving conveyors, feeders, mixers, production machinery, and many other industrial devices. Csdpfx Ahszm Tg Usmjhc Technical specifications: Manufacturer: SEW-EURODRIVE Model: R43DT71D4 Power: 0.37 kW Supply voltage: 230/380 V AC Motor: 3-phase Frequency: 50 Hz Motor speed: 1380 rpm Current: 2.25 / 1.3 A Power factor (cos φ): 0.70 Protection rating: IP54 Insulation class: B Weight: 16.45 kg Country of manufacture: Germany

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze DERA071-12 motor, 0.25 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the photos. This geared motor with a worm gear is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze Csdszncq Sopfx Ahmjhc Motor type: DERA071-12 Power: 0.25 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1365 rpm Output speed: 186.6 rpm Torque: 11 Nm Gear ratio: i = 7.5 Protection class: IP55 Insulation class: F Duty cycle: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the photos.

Condition: excellent (used), For sale: SEW-EURODRIVE RF17 DT63L4/B03 geared motor with a three-phase motor with a power of 0.25 kW and a built-in electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good. Normal signs of use resulting from operation are visible. The scope of sale includes exactly what is shown in the pictures. Technical data: Manufacturer: SEW-EURODRIVE Model: RF17 DT63L4/B03 Power: 0.25 kW Supply: 3× 230 V Δ / 400 V Y, 50 Hz Cjdpfoznn E Iox Ahmjhc Motor speed: 1300 rpm Output speed: 94 rpm Torque: 25 Nm Gear ratio: i = 13.84 : 1 Brake: 230 V AC, 3.2 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Design: IM B5 Weight: 10.84 kg Country of manufacture: Germany

Condition: good (used), Geared motor, electric motor, electric geared motor, geared motor with frequency converter -Handover in its current condition as inspected -Gearbox base: Damage, see photos -Manufacturer: Nord, Type SK20-80L/4 SK80L/4 TFBRE10TIO/2-D -Speed: 40 rpm i= 34.09 -Power: 0.75 kW / 1375 rpm -Engine: Nord type SK80L/4 TFBRE10TIO/2-D -Transmission: Nord type SK20-80L/4 -Frequency converter: Nord type SK 300E-151-340-B -Design: B3 -Shaft: Ø 25 x 60 mm -Brake: 10 Nm -Protection class: IP 55 -Dimensions: 480/185/H305 mm -Weight: 28 kg Cjdpsilq Hiefx Ahmehc

Condition: used, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Chjdpfxozlivpe Ahmoc Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: new, functionality: fully functional, machine/vehicle number: 13289, table bore: 400 mm, overall weight: 10,000 kg, input frequency: 50 Hz, input current: 72 A, workpiece diameter (max.): 650 mm, spindle speed (max.): 10 rpm, The DC 600 gear shaping machine is the ideal solution for producing large-scale internal and external straight spur gears, thanks to its extended capacity and robust structure. The CNC-controlled automatic cutter positioning feature allows for rapid setup and reduced cycle times by limiting the total cutter stroke to the minimum required. The zero center distance between the workpiece table axis and the cutter spindle axis allows for the processing of a wide range of workpiece diameters, from medium-large to small. It adapts perfectly to both diversified and dedicated production, including robot automation for unmanned operation. Chodpfx Aoz Irbdohmjc

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: C28046-0000, Sheet Metal Tab Placement and Bonding Machine In the sheet metal tab placement machine, metal tabs are automatically positioned onto the XPS/EPS core (sandwich panels) based on a laying pattern. The metal tabs are fixed in place using adhesive dots and flush-mounted. For functional details, see the product video. Current XPS/EPS panel sizes suitable for metal tab placement: min. 1,500 x 1,500 mm Chjdeyw Ht Eepfx Ahmjc max. 8,000 x 2,500 mm

Condition: used, mileage: 306,694 km, power: 357 kW (485.38 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, tire size: 315/70 R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, color: white, driver cabin: other, gearing type: automatic, suspension: steel-air, number of seats: 2, Equipment: air conditioning, cruise control, navigation system, parking heater, CERTIFIED PRE-OWNED Standard, color: White IC 194, permissible gross weight: 18,000 kg, 1st axle: 315/70 R22.5, fabric seats, leaf/air suspension, retarder, fifth wheel coupling: H 190 mm, electronic stability program (ESP), automatic climate control, parking air conditioning, radio navigation system, adaptive cruise control, air-suspended driver and passenger seat, armrests for driver and passenger, heated driver's seat, LED headlights, cornering lights, digital radio (DAB), USB port, Bluetooth hands-free kit, lane departure warning system, multifunction leather steering wheel, electric windows, electric glass roof, roof spoiler, electrically adjustable and heated exterior mirrors, tire pressure monitoring, immobilizer, central locking with remote control, sun visor, cool box and refrigerator, hill start assist, 1x 15-pin connector, sailing mode: Eco-Roll, cornering light, speed limiter: 90 km/h, ventilated driver's seat, emergency brake assist, upper and lower bed, suspended cab, ECOSWITCH, Eco Smart Generator, OBU preparation, Driving Style Evaluation, signal horn behind bumper (compressed air), sun roller blind for side window. Last maintenance was on 25.03.2026 at 306,496 km. Roadworthiness and emissions test (HU/AU) will be renewed before delivery, including tachograph inspection and OBU installation. Optional at extra cost: 1 year used vehicle warranty from mobile with deductible. For questions, Jan Furtak is at your disposal. Tel. ., subject to errors and changes. Sale only to commercial customers. Cjdpsy Iht Isfx Ahmshc

Condition: new, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, loading space length: 73,000 mm, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (Tel. No. ...). S-Way AD190S40/P 4x2 box body with tail lift. Chjdpfxoyfvyis Ahmjc EURO VI E emission standard, speed limiter set to 90 km/h, cab rear wall without window, plastic bumper, cab fittings in black, AD MY LOW ROOF CAB, standard cab roof insulation, flat white roof, electronic immobilizer and second vehicle key, rear wall storage compartment with two sections, dashboard design: plastic with black inlays, 10-inch instrument cluster, digital tachograph 4.1, air suspension on rear axle, generator 2160W (24V x 90A), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, moderate climate execution, standard specification, air compressor 1-cylinder 352cc, chassis frame in grey, standard complete tractor-trailer brake, steel air tanks (number depends on suspension and trailer version), front axle stabilizer, exhaust pipe to the left, batteries 180 Ah (Heavy) / 170 Ah (Eurocargo, recommended for tail lift and/or PTO use), standard chassis component positioning, standard ride height, rear frame overhang: 2208mm, fuel tank 290L aluminum, AdBlue tank 50L, ECO NORMAL MODE, standard gearbox mode, 4G Connectivity Box incl. TCO service contract, RADIO with Bluetooth, DAB+, 7-inch display, tire pressure monitoring system (TPMS) with internal sensors, 4 DIN slots storage above, gearbox software ECO-Roll (coasting function), standard engine configuration Cursor 9, adaptive cruise control (ACC), lane departure warning system (LDWS), driver drowsiness attention warning, hill start assist (Hill Holder) for improved start-up on inclines, electronic stability program (ESP), reverse monitoring system with camera, blind spot monitoring system (BSIS) on the right, intelligent speed assistant (ISA), NO HIGH WAY ASSIST, moving off information system (MOIS), advanced emergency braking system (AEBS), pneumatic parking brake, wiring for breathalyzer immobilizer (ALC), CAMBIO 12TX 1850 TD, tires: 315/70R22.5, mechanical roof hatch, first aid kit, fog lights with cornering/turning function, air suspension for driver cab, exterior mirrors electrically adjustable and heated, LED headlights at the front, black decorative foil on doors, transparent sun visor mounted externally above cab, leather steering wheel, sun blind for driver's side window, pneumatic horn behind bumper, fully automatic air conditioning, HI-Comfort driver's seat: multi-adjustable, air-suspended, integrated headrest and height-adjustable seatbelt, lumbar support, 3-step heating/cooling, luxury co-driver seat: 4-way adjustable, air-suspended, integrated headrest and seatbelt, heated, lumbar support, reinforced parabolic spring on front axle, electrical pre-installation for tail lift according to VEHH standard, front axle weight variant: 8,000 kg / rear axle: 11,500 kg (technically possible: 13,000 kg), heavy-duty anti-roll bar rear axle D 60mm, two wheel chocks, cab-mounted battery master switch, battery charging socket, terminal clamps, rear axle ratio: i = 3.08, 24V trailer socket, 15-pin, ...

Condition: good (used), Counting scale, scale, digital scale, market scale, shop scale, price calculating scale -Manufacturer: EXA, Market scale, Retail scale -Type: E 10 Cedsw S T D Eopfx Ahmehc -Weighing range: max. 10 kg -Display: Price / kg / Tare, double-sided display -Dimensions: 320/310/H120 mm -Weight: 3 kg

Condition: used, functionality: fully functional, machine/vehicle number: FN 55xxxx, Year of construction: 2017, operating hours: 5,789 h, load capacity: 4,500 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,640 mm, power: 55 kW (74.78 HP), fork length: 1,150 mm, empty load weight: 6,358 kg, total length: 3,070 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Chassis number: FN 55xxxx Load centre of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Gearbox: Hydrostatic manual switch Condition: Reconditioned without guarantee Technical condition: very good Front tyres type: Superelastic Cedovwhguepfx Ahmjhc Front tyres size: SE 300-15 Rear tyres type: Superelastic Rear tyres size: SE 28x9-15 Description: technically and visually refurbished, UVV approved and serviced, without warranty/liability for material defects Side shift, attached (4100 kg load capacity at 500 mm LSP) 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, Solo pilot, interior mirror, additional air filter, quick couplings for 4th function, Load capacity 4100 kg with side shift, device has been refurbished by the manufacturer

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Further technical data on request or see photos Csdpeqzmnusfx Ahmjhc

Condition: new, Year of construction: 2016, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !! Cjdpfjgwlrdox Ahmohc

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm gear width 120 mm Chjdpfxjzv Ulqe Ahmsc max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm table diameter 400 mm boring diameter 125 mm spindle stroke 120 mm stroke position adjustment 230 mm strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation

Condition: good (used), functionality: fully functional, Tos OFP-32, Serial No. 0427441 Condition: 8/10 Cedozxqdzopfx Ahmehc Max. module: 7 / 9 Max. diameter: 320 mm Max. length: 200 mm Vertical gear hobbing machine

Condition: excellent (used), functionality: fully functional, Machine no. MP 253/18 in good condition, can be inspected while running Max. Gear Diameter: 267 mm (11 inches) Max. Stroke / Face Width: 100 mm (4 inches) Max. Internal Pitch Circle Diameter (PCD): 152 mm Chsdpfxezxxnhj Ahmsc Max. Module Capacity: Module 6 Table Diameter: 254 mm (10 inches) Table Bore: 76 mm (3 inches)

Condition: used, functionality: unexamined, Ferwood Code: RU0009426 - Manufacturer Code: - Condition: Used - Functionality: Not tested - If interested we offer a revision service, contact us. Codpov Hzvusfx Ahmehc

Condition: used, functionality: unexamined, Ferwood code: RU0010348 - Manufacturer code: JS-EV040 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer an overhaul service; please contact us. 10KG - 46X39X27 Chedpfx Ahsycfhqomsc

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003587 - Manufacturer Code: 242234 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer refurbishing service, please contact us. 2KG - 20X20X20 Csdpfoyrpavjx Ahmehc

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws Chsdevvudkspfx Ahmsc • 24 inch monitor, mouse, keyboard The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W PRAWEMA 2006 SYNCHROFINE 205 HS Chsdpfxjvm Efao Ahmjc

Condition: used, Year of construction: 1992, Please contact us for more information. Chsdpfozw E R Hsx Ahmsc

Condition: used, Year of construction: 1983, max. wheel diameter 80 / 124 mm gear width 150 mm max. module 2 Chodsz Dk Afspfx Ahmec min. module 0,3 turning speeds 210 - 1680 U/min min. number of teeth 6 total power requirement 2,2 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 1,5 x 1,8 m Top condition.

Condition: used, Star gear P.I.V 2.7kw Codpfeudyu Eex Ahmshc Manufacturer: P.I.V Type: LN4 K Power: 2.7kw Revolution: 50/min