Used Geibel & Hotz Fs 635-Z Sa for sale (26,685)

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Tiltable 750 kg car trailer UNITRAILER Garden Trailer 201 KIPP with additional drop sides, support wheel and flat tarpaulin The Garden Trailer 201 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 3 to 7 working days. Once you have received the car trailer, all you have to do is register it. Advantages of the Garden Trailer 201 KIPP car trailer If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. Nwedpfet Iv I Dex Abzei You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want!

Condition: new, empty load weight: 136 kg, maximum load weight: 613 kg, overall weight: 750 kg, tire size: 155/70 R13, Year of construction: 2024, Tiltable 750 kg car trailer UNITRAILER Garden Trailer 200 KIPP with additional drop sides, support wheel and flat tarpaulin The Garden Trailer 200 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 3 to 7 working days. Once you have received the car trailer, all you have to do is register it. Further information can be found at the following link - Registering a trailer: what do I need to consider? Tiltable car trailer GARDEN TRAILER 200 KIPP with additional drop sides, support wheel and flat cover Necessary documents and fast delivery If you want to buy a Garden Trailer 200 KIPP car trailer, you don't have to worry about the formalities. We will prepare all the necessary documents required for immediate registration, i.e. invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate. Further information can be found under the following link: from order to delivery. Payment is made in advance. The purchased car trailer will be sent within 24 hours with the complete set of documents for registration. Nwsdpfx Absuk E I Ejzoi Advantages of a Garden Trailer 200 KIPP car trailer If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 3.6 m³, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004191 The Garden Trailer 230 TILT car trailer from UNITRAILER, with a maximum permissible weight of up to 750 kg, features a folding rear gate, allowing for loading and unloading in just a few minutes! The tilting drawbar allows it to be positioned vertically on the rear gate at any point. All formalities related to the purchase will be handled for you. When ordering a car trailer, please specify the maximum permissible weight of the vehicle that will be used to tow the trailer. Technical data of the Garden Trailer 230 TILT car trailer: CHASSIS - Steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-shaped drawbar, which can be folded under the trailer floor at any time BODY - Load-bearing frame made of hot-dip galvanized sheet steel Curved profiles were used with screws Nsdpfxsir H R Ts Abzjwi Loading area: non-slip and water-resistant screen-printed plywood floor, 9 mm thick SIDE PANELS - All side panels are made of galvanized steel. Total height of the side panels: 70 cm Shipping costs will be charged separately.

Condition: new, functionality: fully functional, empty load weight: 144 kg, maximum load weight: 606 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, color: grey, Year of construction: 2024, operation weight: 750 kg, B Führerschein Anhänger GARDEN TRAILER 264 KIPP mit Bordwandaufsatz [zusätzliche 40 cm] und Stützrad Ersatzrad mit Halterung optional Art der Aufhängung ungebremste Achse bis 750 kg Gesamtabmessungen: 3541 mm (Länge) x 1690 mm (Breite) Bordwände Stahl Tragrahmen aus feuerverzinktem Stahlblech Art der Ladefläche aus Siebdruckbodenplatte Verwendung: Umzüge, innerbetrieblicher Warentransport Der Anhänger verfügt außerdem über den Kippmechanismus, mit dem praktisch alle Ladungen blitzschnell be- und entladen werden können. Sehr große Transportfläche, die den Transport von großen Waren erleichtert Überdurchschnittliche Festigkeit mit zusätzlichen Stützbalken unter der Ladefläche Umrissleuchte, die beim Rückwärtsfahren von größer Bedeutung sind Njdpsuih Hgofx Abzswi Korrosionsbeständige und sehr robuste Kotflügel Die Möglichkeit, den Anhänger auf die Heckklappe zu legen [so stellt man sicher, dass der Anhänger wenig Platz einnimmt]. Die Räder wurden bei diesem Modell seitlich montiert (und nicht unter der Ladefläche), was eine sehr bequeme Lösung beim Fahren ohne Ladung darstellt BORDWÄNDE: alle Bordwände wurden aus verzinktem Stahl hergestellt Hintere Bordwand aufklappbar und komplett demontierbar 70 cm hoch [Standardbordwände, die 30 cm hoch sind und Bordwandaufsatz - zusätzliche 40 cm]. Wir bereiten die notwendigen Dokumente für Sie vor, die Sie für die sofortige Anmeldung benötigen, d.h.. Rechnung, EG-Übereinstimmungsbescheinigung, Fahrzeugbrief, Gewährleistungsbuch (2 Jahre Garantie) und unser Zertifikat.

Condition: used, maximum load weight: 8,860 kg, overall weight: 12,000 kg, axle configuration: 2 axles, first registration: 09/2010, next inspection (TÜV): 02/2026, loading space length: 6,337 mm, loading space width: 2,488 mm, loading space height: 506 mm, loading space volume: 7 m³, total width: 2,550 mm, total height: 1,340 mm, Equipment: ABS, Ackermann Z-PA-F12.0/6.4JZ Tandem trailer for glass transport, with folding sideboards * Rail securing system in the floor * Knorr braking system * Trailer EBS, ALB & ABS * Gigant axles, air-suspended & with twin tires * Drum brake ----* Tire dimension: 205/65R17.5 * Technical total weight: 12,000 kg * Tare weight: 3,140 kg Nsdpfx Aoy Hn Shsbzowi * Overall length: 8,360 mm * Next inspection due: 08.2026 ----Vehicle number: 11985----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed. -----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle delivery, vehicle registration, recovery and vehicle transport. -----?YOUR VTS TEAM

Condition: used, mileage: 201,218 km, power: 375 kW (509.86 HP), first registration: 08/2023, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 33.510 BL SA 6x4 tractor unit with EPSILON S260Z96 timber crane First registration: 08/2023 Mileage: 201,218 km Crane operating hours: 830 h Permissible total weight: 33,000 kg Unladen weight: 14,390 kg Wheelbase: 3,900 mm Engine: D2676 LFAF with 12.4-liter displacement, 375 kW and 510 hp Transmission: TipMatic 12 26 DD Profi Performance with ZF retarder Transmission software: "Rocking" and "EfficientRoll" Front axle: reinforced parabolic suspension, 9.5 tons Rear axles: air suspension, 2x 13 tons ECAS air suspension Nodpfezb Aqgjx Abzjwi STEERING BRAKE: The steering brake significantly reduces the turning radius, or greatly improves maneuverability. When activated by the driver, the rear wheels on the inside of the curve are braked (speed up to a maximum of 30 km/h). Aluminum fuel tank: 390 liters Extensive safety package with: Digital axle load display, driver airbag with seatbelt pretensioner, MAN ComfortSteering, MAN BrakeMatic, full brake assist, EBA2 Emergency Brake Assist2, ABS, ASR traction control, ESP electronic stability program, MAN AttentionGuard, LRA lane keeping assist, lane change assist LCS, and turning assist. Safety package Light & Visibility Plus GM cab, air-suspended cab, tinted windows, heated and air-conditioned driver's comfort seat, multifunction leather steering wheel, additional cab insulation, cool box under the bed that can be fully retracted, maneuvering lights at the entrance, work lights on the rear of the cab, MAN sound system, truck navigation, large 12.3-inch color display, 2x air horns on the cab, Bluetooth hands-free system for 2 phones, smoker's package, LED headlights, LED daytime running lights, LED fog lights, high beam assist, auxiliary water heater. Tires Front axle: 385/65 R 22.5, tread depth 100%, NEW Rear axle: 315/80 R 22.5, tread depth 90% Timber crane EPSILON S260Z96 Hydraulic reach: 9,600 mm (double extension), support width: 4.70 m, slewing range: 385°, endless rotator 10 tons G121A reinforced version, timber grapple EPSILON type YFG57X, with large log comb, cross-lever control 2+2, crane seat with seat heating and weather protection roof, 4x LED work lights, biodegradable oil Plantosyn 3268Eco, enlarged aluminum tank with 200 liters, ASA aluminum oil cooler 0177, complete control system for DOLL-LOGO21 including NATO socket and hydraulic trailer coupling, Additional light and air connections for "standard" semi-trailers. RENTING is the new BUYING; with us, it is also available as full-service rental or lease-purchase.

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Nsdpfshkz E Tex Abzswi Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2025, Jointer-thicknesser with TERSA quick-change system for planer blades. With TERSA quick-change system for blade changes in seconds. TERSA planer blade system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and even material feed. Robust jointer tables made of ribbed cast iron, milled and stress-relieved, making them insensitive and permanently flat. Large, swiveling fence for precise jointing, can be repositioned at 90°/45°, with quick-clamp. Jointer table opens to the rear. Powerful motor. Robust steel/cast iron construction. Long-hole drilling device can be retrofitted. Equipment details: TERSA planer blade shaft. No more adjusting and screwing. Blade changes in seconds. Self-locking. Particularly quiet. Perfect planing result. Jointer Standard equipped with TERSA quick-change system for planer blades. Nwedpfxjdqy Uqe Abzsi Large-sized jointer tables. The jointer and thicknesser tables made of cast iron guarantee maximum smoothness and vibration-free operation. Thicknesser With the powerful thicknesser feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. Changing from jointer to thicknesser is done in seconds with a single action. Drive Sturdy chain drive. Drive sprockets made of steel. Solid cast iron bearing housing. Planing unit Solid anti-recoil devices prevent the workpiece from kicking back. 3-blade TERSA shaft ensures an optimal planing result. Special equipment features Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. Scope of delivery: Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. TERSA planer blade shaft. Model: minimax fs 30g TERSA Article No.: 5503036 Technical data ---Technical data, jointer--- Total length of tables: 1200 mm Feed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. chip removal: 3 mm ---Technical data, thicknesser--- Dimensions of thicknesser table: 450 x 300 mm Min./max. working height: 3/200 mm Feed speeds: 6 m/min. Planer shaft diameter / planer blades: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction nozzle diameter: 2 x 120 mm Weight: 140 kg

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Model: FS 41 Classic Tersa Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Nsdocnxayepfx Abzowi Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side No hose is needed that extends around the machine

Condition: new, Year of construction: 2025, Holzkraft Combined Jointer-Planer Machine - available immediately - Nwsdoih Dxdepfx Abzoi Ideal for demanding craftsmen and carpenters The particularly long, one-piece jointer tables allow for easy surfacing of workpieces Work tables are made of gray cast iron, making them durable and permanently level Rear-opening jointer tables with spring support for quick and convenient setup changes Thanks to the permanently mounted dust extraction hood, no repositioning of the extraction hose is necessary during setup changes, saving valuable working time Helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the planer outfeed ensures even wood discharge Material feed with four speeds Planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Preparation for mortising attachment Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total length of tables 2250 mm Chip removal max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter Planer 1 x 120 mm Drive power Main motor 7 kW Installation Information Space requirement Length 2250 mm Space requirement Width/Depth 1440 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Planer Planer table Length 850 mm Planer table Width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Chip removal max. 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display Nwodpfxoff Hdps Abzji On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Nwjdpolht Htefx Abzji Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Description Technical Data Scope of Supply Accessories Equipment Options Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables allow for easy planing of workpieces. The work tables are made of cast iron, making them durable and ensuring they remain perfectly flat. Planing tables that open simultaneously towards the rear, with spring-assisted support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, there is no need to change the dust extraction hose during adjustments, saving valuable working time. The helically toothed steel infeed roller ensures constant and uniform wood feed. The rubber outfeed roller at the end of the thicknesser ensures uniform wood discharge. Material feed with four speeds. Planer/thicknesser table adjustment via handwheel with integrated display for planer height. On/off switch in operator position. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising attachment. Quality – Made in Italy. Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Chip removal, max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter, thicknesser 1 x 120 mm Drive power Main motor 7 kW Installation Information Space required, length 2250 mm Space required, width/depth 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thickener Thickening table length 520 mm Thickening table width 850 mm Working height, min. 3 mm Working height, max. 240 mm Working length, min. 220 mm Chip removal, max. 5 mm Electrical Data Connection voltage 400 V Phase(s) 3 Ph Nwsdpfxsff Hdms Abzoi Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min⁻¹ Planer width, max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2013, loading space length: 13,400 mm, loading space width: 2,400 mm, Equipment: ABS, Rauw SA 393 Platform Lift Axle, SAF Axles, Wood/Machine Transporter with Wheel Arches Internal number for inquiries: 0326237 * ABS * EBS Nwodjyvct Dopfx Abzsi * 3-axle air suspension * Lift axle * SAF axles * Storage box on the right and left sides / plastic Cargo area length: Length: 13,400 mm * Width: 2,490 mm Tires: 1st axle: 265 / 70 R 19.5, 30% air suspension / lift axle 2nd axle: 265 / 70 R 19.5, 30% air suspension 3rd axle: 265 / 70 R 19.5, 30% air suspension ----Price: EUR 19,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: * We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale excepted.

Condition: ready for operation (used), Siemens 1FT5066-0AG01-2 - AC drive motor, serial number: E9K81678102001, Z = see nameplate. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Nwjdpfxsi D Sgdj Abzsi

Condition: ready for operation (used), Endress + Hauser Nivosonic FMU 671Z/676 Z - FMU 671Z / 676 Z level indicator, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdpfx Aboi D Ur Rezjwi

Condition: ready for operation (used), Siemens 1FT5074-0AF01-2 - AC variable speed drive motor, Z = see nameplate, serial number: E9J10906199006, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdji D Sw Ujpfx Abzswi

Condition: ready for operation (used), Siemens 1FT5074-0AF01-2 - AC motor, Z = see nameplate, SN: YFS729644201001. The motor was completely overhauled at Siemens and then stored for a long period. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Nwedpfx Aei D Sxkjbzei

Condition: ready for operation (used), Siemens 1FT5076-0AF01-2 - AC motor, serial number: E1N63040402001, Z = see nameplate. The motor has been completely overhauled by Siemens, used condition, normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Nwodpsi D S A Ijfx Abzji

Condition: ready for operation (used), KUKA 1FK6081-6AF71-1ZZ9-Z S47 servo motor SN:YFS350297765001, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Nsdjrbw Umjpfx Abzjwi

Condition: ready for operation (used), Siemens 1FT5044-0AF01-1 - AC variable speed drive motor, serial number: ECO92862904001, Z = see nameplate, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nwsdpfxoi D R A Ns Abzei

Condition: reconditioned (used), Motor 5 kW Nedpfx Asy Hkzfobzjwi electric height adjustment with digital display brake can be released electrically for knife change planer cutter shaft 520 mm manual feed speed 5-8-12-18 m/min start and stop buttons at front and rear planer table length 2250 x 540 mm manually adjustable fence with angle function sliding planer shaft guard

Condition: used, Gear motor, electric motor, electric gear motor Nodpjivfgqjfx Abzewi -Manufacturer: SEW-Eurodrive, geared motor with brake -Type: SAF 32 DTZ1D2BMG/Z -Speed: 55 rpm -Power: 0.55kW -Hollow shaft: hexagon 24 mm, length 120 mm -Protection class: IP54 -Brake: 2.5 Nm -Dimensions: 410/200/H150 mm -Weight: 18 kg.

Condition: excellent (used), Three-phase motor, electric motor -Power: 160 kW -Speed: 2960 rpm Nwodpjb A Skzsfx Abzei -Voltage: 500 V (delta) -Protection class: IP 23 -Design: B3-B5 -Shaft: Ø 70 mm -see photo nameplate for further details -Weight: 830 kg

Condition: good (used), Year of construction: 2000, Three-phase motor, electric motor -Power: 250 kW Nwsdpfxopmdale Abzsi -Speed at 50 Hz: 2985 rpm -Speed at 60 Hz: 3580 rpm -Shaft: Ø 65 mm -Height of shaft axis: 350 mm -Recess: Ø 680 mm -Flange: Ø 800 mm -Protection class: IP 55 -Design: B3B5 -Dimensions: 1400/800/H1070 mm -Weight: 1500 kg