Used Gfa 1T 4000/1800 for sale (4,833)

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Nwodpfxorx Rxts Akueg Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm Nwedpfowvir Iox Akuog

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Njdoxf E Twopfx Akuewg Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Nwsdpfx Akekwcdbousg Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, 0554 mm 370 mm 2000 mm 280 mm 104 mm 11 kW Njdpfxewyd Tne Akuewg

Condition: new, Year of construction: 2026, 0554 mm 370 mm 3000 mm 280 mm 104 mm 11 kW Nwsdpfx Akjy Erx Neujg

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Nwedpfxowkaalj Akujg Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2006, condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS type : Universal capacity : 1.800 kg/h thermal output : 1.311 kW working pressure : 16 bar test pressure : 57 bar water contents approx. : 218 ltr heating surface : 23,7 m² CE mark : CE 0035 Nwsdpfx Asikvdqskuog year of construction : 2006 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body and the existing fine and coarse fittings. with feed water module, mounted on basic frame, consisting of: switch cabinet, VA feed water tank, Speck feed water pump, dosing tank and mud blow-down tank

Condition: excellent (used), Year of construction: 2020, VETTER Pillar Jib Crane PS10-2.0 Sale from site! Manufacturer: VETTER Krantechnik Type: PS10-2.0 Year of manufacture: 2020 Factory No.: 2000204/01 Design: Pillar jib crane with electric chain hoist For sale is a used VETTER pillar jib crane suitable for industrial environments, workshops, production, assembly, and maintenance. This crane is ideal for lifting, positioning, and relocating workpieces, components, and machinery parts. Technical Data: Load capacity: 1,000 kg / 1 t Jib length: 2,000 mm Slewing range: approx. 270° Overall height: approx. 3,000 – 3,500 mm Estimated dead weight: approx. 350 – 500 kg Actual dimensions and weights may vary depending on configuration, column height, and installed electric chain hoist. Equipment: VETTER pillar with jib arm Electric chain hoist Load hook Pendant control / handheld operation Schneider Electric control element Main disconnect switch Base plate mounting Industrial design Condition: Used machine with age- and use-related signs of wear. Visual condition as shown in the images. Scope of delivery: VETTER Pillar Jib Crane PS10-2.0 Electric chain hoist Pendant control / handheld operation Scope of delivery as shown Inspection by appointment possible. Nsdpfxjy Rkbmj Akuewg Commercial sale – Sale without warranty. Subject to alterations and errors.

Condition: excellent (used), Year of construction: 2020, VETTER Column-Mounted Slewing Crane PS10-2.0 Sale ex location! Manufacturer: VETTER Krantechnik Model: PS10-2.0 Year of manufacture: 2020 Serial no.: 2000204/01 Design: Column-mounted slewing crane with electric chain hoist For sale is a used VETTER column-mounted slewing crane suitable for industrial, workshop, production, assembly, and maintenance applications. The crane is designed for lifting, positioning, and relocating workpieces, components, and machine parts. Technical data: Load capacity: 1,000 kg / 1 t Jib length: 2,000 mm Slewing range: approx. 270° Overall height: approx. 3,000 – 3,500 mm Estimated dead weight: approx. 350 – 500 kg Actual dimensions and weights may vary depending on version, column height, and installed electric chain hoist. Equipment: - VETTER column with jib arm - Electric chain hoist - Load hook - Pendant control - Schneider Electric control unit - Mains isolator switch - Base plate mounting - Industrial-grade design Njdpey Ri T Ijfx Akuewg Condition: Used machine with age- and use-related marks and wear. Visual condition as shown in the pictures. Scope of delivery: - VETTER column-mounted slewing crane PS10-2.0 - Electric chain hoist - Pendant control - Scope of delivery as shown Viewing by appointment possible. Commercial sale – sold without warranty. Subject to alterations and errors.

Condition: good (used), 4000 Insert grid 128 x 79.5 x 3cm Nodperxtd Tjfx Akujwg Used goods, very good condition, see pictures. Support bar height 30 mm Support bar thickness 2 mm Mesh size 7 x 3.5 cm Galvanized Negotiated price: € 25,-- net per piece Price from 70 pieces 22.50 net per piece, larger quantities on request! 35 pieces per pallet Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: excellent (used), Year of construction: 1998, center height: 630 mm, workpiece weight (max.): 3,000 kg, grinding length: 4,000 mm, grinding parameters 630x4000 mm max. weight of workpiece - 3000 kg (in centers) Nwjdpfx Akoy Tkgnjuog main motor (spindle) - 19 kW

Condition: like new (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 560 m/min, rapid traverse Y-axis: 560 m/min, rapid traverse Z-axis: 660 m/min, nominal power (apparent): 38 kVA, controller manufacturer: MITSUBISHI MSX-853 IV, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 900 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 2,513 mm, total length: 2,720 mm, total width: 4,224 mm, table width: 400 mm, table length: 400 mm, overall weight: 7,600 kg, spindle speed (min.): 12,000 rpm, CNC controller: MITSUBISHI MSX-853 IV Njdpfxey Rn Nbs Akuewg Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 660 Distance spindle nose - table surface mm: 80-640 Feed rates m/min: 0-60 Worktable Number of pallets: 2 Table dimensions mm: 400 x 400 Maximum workpiece size (D x H) mm: 630x900 Max. workpiece weight kg: 400 APC time s: 9 División estandar Grados: 360 - 0.001º Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 15/11 Spindle torque Nm: 110 Bearing Inner Diameter mm.: 80 Tipo: SJ-2B4351TK Tool system Tool magazine slots: 40 Max. Tool Diameter: 70 With free neighboring places mm: 170 Max. Tool Length mm: 450 Max tool weight kg: 8 Tool Shanks : MAS-BT40 Equipment Chip conveyor Workarea light 4th axis Cooling Tank capacity: 170L High-pressure bar: 15 Machine running times Under power: 64.734 Rated power kVA: 38 Operating Time: 31.113 Basic machine dimensions / weight Length mm: 2.720 Width mm: 4.224 Height mm: 2.513 Weight kg: 7.600

Condition: used, Year of construction: 2014, machine/vehicle number: 78300122, Drive type: Diesel, power: 308 kW, displacement: 10,600 cc, unladen weight: 16,170 kg, permitted total weight: 18,000 kg, with 2 driven axles, recorded mileage: 64,407 km, operating hours: 7,640 hrs, with category 4 rear hitch, mechanical, hydraulic top link, cat. 3, mounting for front weight, 5 additional control valves with breakaway couplings at the rear, rear PTO 1,000 rpm, PTO shaft 1 3/4, 6-spline, engine OM470 K 97/68 308 kW t4, fuel tank extension by 190 liters, refrigerator, semi-active cab suspension, fire extinguisher, GPS Pilot S10 RTK radio; NOTE: Steering shows error message Nwedpfx Aksy Rvlkjusg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 - RSVN-38/25A, frame set section, year 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year 2001 - RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 - FPS-36/25U2T, gas filling press for argon, year 2001 - RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 - RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 - APKV-25/2, 2-track cork applicator, year 2001 - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 Nwjdpfsy Sv Twox Akueg - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalogue, Beckhoff PC, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year 2001 Availability now from our stock in Hofkirchen/Austria

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shape units according to Lisec shape catalogue and 4-sided stepped units: - RTVN-32/25WE, inlet conveyor (3,2 m length), year 2007 (!) - RTL-25VN, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower, year 2007 (!) - RTVN-16/25ST, outlet conveyor (1,6 m length), year 2007 (!) Nwsdpfx Ajy Sv Sgekueg – RSVN-38/25A, frame set section, year 2001 – RTVN-15/25MZ, measuring zone for gas filling press, year 2001 – RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 – FPS-36/25U2T, gas filling press for argon, year 2001 – RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 – RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 – APKV-25/2, 2-track cork applicator, year 2001 – RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 All machines were working properly until dismantling and are now available from our stock in Hofkirchen/Austria and from our stock in Oroshaza/Hungary

Condition: excellent (used), Year of construction: 2005, Twin pallet 400 x 400mm, X 560 Y 560 Z 630mm, B 0,001dg. 14.000Rpm BT 40, ATC 60 pos, cooling through spindle, MSX 501, weight 9,800kg Nsdey R Aurepfx Akuowg

Condition: like new (used), functionality: fully functional, cutting length (max.): 600 mm, cutting width (max.): 410 mm, The machine is in very good condition – like new. Equipped with a vertical heating element and sealing jaws for packaging in PE (polyethylene) film – a complete set of jaws for laminates is available. Forming tube for packages with a width of 350 mm – other sizes are available. Technical data for ILAPAK Vegatronic 4000 VFFS: Nwodey Tqybopfx Akueg ▪️ Output: up to 140 packages/min ▪️ Machine type: Continuous Film Motion ▪️ Type: VFFS – Vertical Form Fill Seal Bag size: ▪️ Minimum width: 70 mm ▪️ Maximum width: 410 mm ▪️ Maximum length: 600 mm Supported films: ▪️ Heat-sealable films ▪️ Polypropylene (PP) ▪️ Laminates ▪️ PE (polyethylene) film Film roll: ▪️ Maximum roll width: 880 mm ▪️ Maximum outer diameter: 550 mm ▪️ Core diameter: 76 mm ▪️ Maximum roll weight: 100 kg Power supply: ▪️ 400 V ±5% ▪️ 3 phases + neutral ▪️ 50 Hz ▪️ 7.5 kW Compressed air: ▪️ 7 bar ▪️ 350–900 Nl/min Control: ▪️ Industrial PC ▪️ 8.4” touch panel ▪️ Memory for up to 100 programs Construction: ▪️ Stainless steel ▪️ Hygienic Open Frame design ▪️ Quick bag size changeover ▪️ Film centering ▪️ Servo drives Machine dimensions: ▪️ 1478 × 2336 × 1550 mm Weight: ▪️ Approx. 1500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit Nedoy Saqgopfx Akuswg - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Njdpfoy Sappex Akujwg Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference Nwedpfsy Tb Snsx Akujg -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: used, Year of construction: 2021, operating hours: 744 h, Equipment: all wheel drive, JCB 1T-2 High-Tip Dumper, year 2021, with only 744 operating hours! ----* Manufacturer: JCB * Model: 1T-2S5 High Tip Dumper * Year of manufacture: 2021 * Recorded operating hours: approx. 744 * Last service at approx. 531 operating hours * High-tip dumper * Power: 16.1 kW * Payload: approx. 1,000 kg * Operating weight: 1,515 kg * Excellent condition * Video available on request (WhatsApp) * Additional photos available on request * Price: €11,900 net + 19% VAT ----For further questions, please call: For more questions please call: Erik Kortum: WhatsApp Njdpfxjy Rca Ie Akujwg All information provided without liability or warranty, subject to prior sale and errors.

Condition: used, Year of construction: 2021, operating hours: 833 h, Equipment: all wheel drive, JCB 1T-2 High Tip Dumper from 2021 with only 833 operating hours! ----* Manufacturer: JCB * Model: 1T-2S5 High Tip Dumper * Year of manufacture: 2021 * Recorded operating hours: approx. 833 * High tip dumper * Power: 16.1 kW * Payload: approx. 1,000 kg * Operating weight: 1,515 kg * Excellent condition * Video available on request (WhatsApp) * Additional photos available on request! * Price: EUR 11,900 net + 19% VAT. ----For further questions, please call: For more questions please call: Nedpey Rcbfjfx Akuewg Erik Kortum: WhatsApp ?All information provided without obligation or guarantee. Subject to errors and prior sale. ?

Condition: used, Year of construction: 2021, operating hours: 873 h, Equipment: all wheel drive, JCB 1T-2 High Tip Dumper from 2021 with only 873 operating hours! ----* Manufacturer: JCB * Model: 1T-2S5 High Tip Dumper * Year of manufacture: 2021 * Recorded operating hours: approx. 873 * High-tip dumper * Power: 16.1 kW * Payload: approx. 1,000 kg * Operating weight: 1,515 kg * In excellent condition * Video available on request (WhatsApp) * More photos available on request! * Price: €11,900, net + 19% VAT. ----For further questions, please call: For more question please call: Nwjdpfxsy Rca Uo Akujg Erik Kortum: WhatsApp ?All information is provided without guarantee or warranty. Errors and prior sale excepted.?

Condition: used, functionality: unexamined, input voltage: 220 V, Used New Brunswick Innova 4000 incubator shaker Manufacturer: New Brunswick Model: Innova 4000 Nwsdpfx Aoy Nzp Eekueg With sample holders