Used Gmc Macchine Srl Kgs 660S for sale (66,591)

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Lrodpfsz D U D Tox Agrot Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Barrel heating power: 14.8 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Year of construction: 1991, condition: excellent (used), functionality: fully functional, overall weight: 520 kg, Pump was operated on a test bench and has only run for very few operating hours. Flow rate: 400 m³/h ( 111 liters / second ) Delivery head / delivery pressure: 19 meters / 1.9 bar Pump speed: 1450 1/min NPSH required: 3.83 m Efficiency: 85.7% Shaft power: 24.04 kW Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm) Shaft seal: single mechanical seal Manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: roller bearing Lubrication type: Grease Materials of construction Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: Cast iron EN-GJL-250 Shaft sleeve: CrNiMo steel Nominal size of suction nozzle: DN 200 Discharge connection Nominal diameter: DN 150 Nominal pressure suction PN 16 Nominal pressure pressure PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1435 1/min Frequency: 50 Hz Rated voltage: 380 / 660 V Rated motor power: P2: 30 kW Thermal class: F Motor protection class: IP54 Cosphi: 0.82 Ljdpfx Agjrfdttorort Dimensions: Length: 1600 mm Width: 650 mm Height: 820 mm Weight: 520 kg

Condition: like new (used), Year of construction: 2015, operating hours: 26,915 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 30 kVA, controller manufacturer: M-730UM, workpiece weight (max.): 1,000 kg, total height: 2,800 mm, total length: 3,300 mm, total width: 3,000 mm, table width: 600 mm, table length: 1,100 mm, spindle speed (min.): 8,000 rpm, Year of construction: 2015 CNC controller: M-730UM Lrsdpfsxwxc Aex Agrjt Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 6870

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Lrsdpfx Agezx Eftorst Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Condition: used, Year of construction: 2017, functionality: fully functional, MHS (VanRiet) sorter – disassembled and prepared for transport (OFFER EXCLUDES SORTING STATIONS) Total: approx. 660 m of conveyor belts and 60 m of sorting line. Sorter ready for transport. Ledpszwxmhefx Agrjrt The sorter consists of: a) one line of roller conveyors b) parallel to each outbound line (3 lines) and to the returns line (1 line), there is a line (conveyor belt) for removing unnecessary cartons (leading outside the building to a baling press – not included in this offer) c) one line with 46 package drop-off locations, each equipped with a scanner to determine the size and weight of individual packages The capacity of this sorter is 6,000 packages per hour. Additional photographic documentation illustrating the technical condition of the items and components being valued, as well as detailed components of the sorter, has been included in the valuation. The operating principle of the sorter involves packing the item for shipment and assigning the package to a specific transport company. The item should be packed in a box or polybag. Then, an employee scans the item and creates a label for the box or polybag. Information about the box/container is sent by the sorter to the VanRiet controller. In the meantime, the box/container is loaded by an employee onto the loading line. Products are transported down the line and then combined onto a single conveyor line. At the end of the line, a scanner with a camera identifies the product, measures its dimensions, and then the product is sorted to a designated output (package pick-up location). The MHS (VanRiet) sorter is designed to handle products of various dimensions. It handles cartons with lengths from 150-800 mm, widths from 100-600 mm, heights from 10-400 mm, and weights from 0.25 kg to 32 kg. Polybags with lengths from 200-550 mm, widths from 150-550 mm, heights from 13-400 mm, and weights from 0.25 kg to 10 kg. The sorter can handle up to 6,000 packages per hour, and shipments are divided into one of 46 destinations. The general layout of the sorter is shown in the diagram below. Lines 1-3 are outbound lines, and line 4 (added in 2020) is used for receiving returns.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 308, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,600 mm, table length: 650 mm, table load: 1,850 kg, overall weight: 13,000 kg, - Year of manufacture: 1994 - Single owner, used exclusively in-house - Fully operational, powered, ready for demonstration - Control: Fanuc 0MC - X-axis machining range: 1300 mm - Y-axis machining range: 650 mm - Z-axis machining range: 660 mm - Table working surface: 1600 x 650 mm - Max. permissible workpiece weight: 1850 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 rpm Lsdpoxp Hu Dofx Agrert - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK50 / MAS BT50 - Tool magazine: 30 stations - Machine weight: 13,000 kg - Serial number: 308 Net price ex location Luckenwalde (Germany), not loaded, without transport

Condition: like new (used), functionality: fully functional, mileage: 95,000 km, power: 235.36 kW (320.00 HP), first registration: 11/2024, fuel type: diesel, empty load weight: 12,400 kg, overall weight: 22,000 kg, tire size: 14.00 R 20, axle configuration: 6x6, brakes: retarder, color: green, gearing type: other, Year of construction: 1991, operation weight: 12,400 kg, Equipment: ABS, all wheel drive, cable winch, compressor, differential lock, hydraulics, retarder, trailer coupling, TUV is made NEW truck registration , The Steyr in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The 1491 is equipped with: Cable winch, all-wheel drive, rear differential lock, 3 front seats, Rotzler cable winch at the rear. - Tire size 14.00R20, transmission with 8 gears plus torque converter clutch , has an empty weight of 12400 kg , total weight is 22000 kg , displacement 9721cm? , , 24Volt power supply , The Steyr not only has TÜV on delivery, but also drives reliably :-) - The Steyr is also ideal as a hobby vehicle but does not shy away from daily work. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why do you want to settle for less? - Give me a call Greetings, Philipp Lodpfx Aeu Ucimsgrjrt

Condition: like new (used), Year of construction: 2019, operating hours: 44,087 h, functionality: fully functional, machine/vehicle number: 02620000651, overall weight: 6,360 kg, Equipment: documentation/manual, Gildemeister/DMG Mori CTX 2500/700 CNC Turning Machining Center (2019) – used and operational The machine is operational and in good condition, and is available for any testing. Year: 2019 Technical details: Serial No.: 02620000651 Driven spindles: Rated speed: 4,000/5,000 rpm Net weight: 6,360 kg Total operating hours: 44,087 h Spindle hours: 27,832 h Cooling unit Chip conveyor Ledpszxxh Uofx Agrert Coolant treatment system Control system Manufacturer: DMG Mori Model: Ergoline Tool turret 14 positions For driven tools Condition: very good, operational Ready for immediate delivery The machine runs without any problems. The machine is available at H.B.R. srl – Calolziocorte (LC) – Italy. You can inspect and test the machine with your own staff.

Condition: excellent (used), -M4 Soleo -Overall dimensions (LxWxH): 1730x1526x2480 mm -Usable baking width: 1370 mm -Usable baking depth: 965 mm -Baking surface per deck: 1.32 m² Lredpfewxx Nnox Agrst -Number of trays per deck: - 4 of 400 x 600 - 4 of 460 x 660 - 3 of 460 x 760 - 2 of GN 530 x 650 -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg -Year of manufacture: 11/2017

Condition: used, -M4 Soleo -Overall dimensions (LxWxH): 1730x1526x2480 mm Lrjdjwx I Utopfx Agret -Usable baking width: 1370 mm -Usable baking depth: 965 mm -Baking surface per deck: 1.32 m² -Number of trays per deck: - 4 of 400 x 600 - 4 of 460 x 660 - 3 of 460 x 760 - 2 of GN 530 x 650 -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg -Year of manufacture: 11/2017

Condition: new, Year of construction: 2026, CNC Vertical Wheel Lathe for Alloy and Steel Wheel Refurbishment A modern CNC vertical lathe designed specifically for the professional refurbishment of alloy and steel wheels. The machine enables fast and precise restoration of the original factory finish, whether the wheel has suffered mechanical damage, corrosion, or welding repairs. Its vertical design provides the operator with full control over the machining process, while the rigid, heavy-duty base ensures exceptional accuracy even when machining large wheels. It is the ideal solution for tire service centers, wheel refurbishment companies, automotive detailing businesses, and small-batch manufacturing operations. Unlike a conventional universal lathe adapted for wheel machining, this machine has been engineered exclusively for wheel refurbishment. This provides several key advantages: Shorter machining time per wheel Minimal cutting tool wear Superior surface finish without chatter marks or waviness Fast and easy operator training Ledpfx Aezpww Asgrort The finished surface matches the original factory diamond-cut appearance, allowing workshops to offer premium refurbishment services while significantly increasing profitability. Key Benefits Suitable for passenger car and light commercial vehicle wheels High-precision reproduction of the original diamond-cut finish Quick workpiece setup and intuitive operation Consistent, repeatable machining results on every wheel Heavy, vibration-resistant machine construction Increased profitability of wheel refurbishment services Technical Specifications Parameter Specification Maximum Turning Diameter 700 mm Maximum Wheel Diameter 660 mm Maximum Chuck Diameter 670 mm Spindle Speed 50–1200 rpm Feed Rate 0.1–1000 mm/min Vertical Travel (Z Axis) 550 mm Horizontal Travel (X Axis) ±330 mm Rapid Traverse (X Axis) 3000 mm/min Rapid Traverse (Z Axis) 3000 mm/min Tool Size 25 × 25 mm Motor Power 4 kW Machine Weight 1200 kg Overall Dimensions 1300 × 1250 × 1960 mm Applications Removal of curb rash, scratches, and surface damage Wheel preparation for painting or polishing Restoration of diamond-cut decorative surfaces Refurbishment of wheels after straightening and welding Machining of new wheels for low-volume production Equipment (Depending on Configuration) Special wheel chuck Software package with wheel profile optimization Touch probe measurement system Automatic lubrication system 4-position tool turret Operator training and technical support Full CE compliance

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 700 mm Travel distance Y :450 mm Travel distance Z: 420 mm max. workpiece size X: 910 mm max. workpiece size Y: 660 mm max. workpiece size Z: 400 mm max. workpiece weight: 1200 kg table size X: 650 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: +101 generator: 30 Ampere submerged cooling unit CNC wire EDM machine 5 CNC axes: X / Y / Z / U / V Automatic wire threading Dual Water Jet with Annealer Automatic wire break recovery 15" TFT touchscreen Linear glass scales in X / Y Ljdpez Aq Dvsfx Agrsrt Dielectric chiller Automatic temperature control Max. table load: 1,200 kg Max. machining current: 30 A Programmable wire tension: 2–30 N Standard wire spool: 16 kg Machine weight: approx. 6,000 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Lsdpfsz Apc Rsx Agrort Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Lodpfx Aoz A D Irjgrsrt Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, displacement volume: 523 cm³, plate length: 660 mm, plate height: 710 mm, total length: 6,700 mm, total width: 1,600 mm, total height: 1,600 mm, overall weight: 10,900 kg, KRAUSS MAFFEI KM 160-1000 PX Stock No.: 503156 Manufacturer: KRAUSS MAFFEI Type: KM 160-1000 PX Control System: MC6 Year of Manufacture: 2018 Operating Hours: 9585 h Technical Data – Clamping Unit Clamping Force: 1600 kN Tie Bar Spacing h x v: 520 x 470 mm Platen Size h x v: 710 x 660 mm Minimum Mold Height: 200 mm Maximum Mold Height: 600 mm Opening Stroke: 1050 mm Ejector Stroke: 150 mm Ejector Force: 33 kN Centering of Moving Platen D: 120 mm Centering of Fixed Platen D: 160 mm Technical Data – Injection Unit Screw Diameter: 55 mm Injection Volume: 523 ccm Injection Pressure: 1904 bar Screw Length: 20 l/d Screw Speed: 243 min Screw Torque: 827 N Plasticizing Rate: 43 g/s PS Free Injection Rate: 297 g/s PS Number of Heating Zones: 6 Dimensions & Weight Machine Dimensions L x W x H: 6.7m x 1.6m x 2.3m Total Weight: 10900 KG Equipment Lrsdpfx Aez A D Raegrjt Screen text in German CEE socket 16A CEE socket 32A Pressure accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2 x Machine with water manifold Machine without material hopper Leveling elements Interface for color dosing device Interface for temperature control unit USB interface Schuko socket 10A Low-wear plasticizing unit Tool heating 24x

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 250 mm, column diameter: 50 mm, opening stroke: 480 mm, plate length: 450 mm, plate height: 500 mm, total length: 2,200 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 2,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Complete plastic molding line OLEOPRESS OP/Z 40 press + 3M OPZ 50 oven + PGV thermoregulator For sale: a complete line for plastic molding, consisting of: OLEOPRESS OP/Z 40 hydraulic injection press 3M OPZ 50 industrial electric oven PGV RHC7 mold thermoregulator Machines are in working order and can be inspected on site. INJECTION PRESS Manufacturer: OLEOPRESS S.r.l. (Italy) Model: OP/Z 40 Year: 1999 Clamping force: 400 kN (40 tons) Configuration: Horizontal – 4 columns Technical data: Distance between columns: 250 × 300 mm Column diameter: 50 mm Maximum opening stroke: 480 mm Plate dimensions: 400 × 500 mm Cylinder heating capacity: approx. 6–8 kW Power supply: 400 V – 50 Hz – 100 A – three-phase Air line pressure: 10 bar Estimated weight: approx. 2,800 kg INDUSTRIAL OVEN Manufacturer: 3M Forni Industriali (Italy) Model: OPZ 50 Power supply: 400 V Lrsdpfszpbc Aox Agret Installed power: 36 kW (18 + 18 kW) Maximum temperature: 650°C High-temperature industrial electric oven, suitable for: mold preheating post-curing polymerization of thermosetting materials MOLD THERMOREGULATOR Manufacturer: PGV srl (Italy) Model: RHC7 Power supply: 400 V Rated current: 28.6 A Interrupting capacity: 17.6 kA Unit for controlling mold temperature during the production cycle.

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 2.028.01.057.02 -Dimensions: 265/125/H100 mm Lsdpfx Aoiidr Rsgrert -Weight: 2.0 kg

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Lsdpfx Agexyhdbersrt Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Year: 2015 Axis X 660 mm Axis Y 406 mm Axis Z 508 mm Rotary table (4th axis) no Type of CNC Table length 762 mm Table width 406 mm Lrsdpezwwndofx Agret Max. part weight 340 kg Number of tool pockets 20 Spindle taper Max. spindle speed 10000 rpm Spindle motor power 11 kW

Condition: used, Year of construction: 2009, functionality: fully functional, type of input current: three-phase, space requirement height: 5,500 mm, Equipment: documentation/manual, # Used Bag Palletizer Italproject MAXIPAL SV – up to 50 kg – 900/1,200 bags/hour We offer this used Italproject MAXIPAL SV automatic bag palletizer, year of manufacture 2009, designed for top-entry palletizing of bags weighing up to 50 kg. The machine is suitable for automatic end-of-line palletizing applications in sectors such as chemicals, fertilizers, animal feed, pet food, building materials, flour, sugar, seeds, powders and granular products. ## MAIN FEATURES * Automatic top-entry bag palletizer * Bag weight: up to 50 kg * Production speed: approximately 900–1,200 bags/hour * High-level bag infeed conveyors * Motorized bag flattening / pressing unit * Bag turning device * Roller pre-forming unit * Layer-forming pusher system * Opening layer deposition platform * Perimeter layer compacting system * Motorized pallet lifting carriage * Motorized empty pallet magazine * Adjustable pallet magazine width * High-level slip-sheet / interlayer magazine * Automatic interlayer positioning arm * Motorized pallet roller conveyors ## DOCUMENTATION AND TECHNICAL SUPPORT The machine is supplied with: * Technical manuals * Electrical diagrams * Available technical documentation * Source software Duetti Packaging owns the Italproject know-how and can therefore provide spare parts, technical assistance, maintenance and engineering support for this machine. This represents an important advantage compared with many other used palletizers on the market, as spare parts and technical support remain fully available. ## REVAMPING AND CUSTOMIZATION Upon request, Duetti Packaging can provide: * Complete machine overhaul * Mechanical revamping * Electrical and software revamping * Modification for new bag sizes * Adaptation to different bag types * Modification of palletizing patterns Lrodpfx Aszq Sd Hsgrot * Preventive and corrective maintenance * Installation at customer's site * Commissioning and start-up * Operator training * Spare parts supply * Updated technical documentation * New certification, where technically and legally applicable * Warranty on the activities performed by Duetti Packaging according to the agreed scope of supply ## OPTIONAL – INLINE PALLET WRAPPER An original Tecnowrapp P60 automatic rotary-platform pallet wrapper is also available. The wrapper can be supplied together with the palletizer to create a complete automatic bag palletizing and pallet wrapping line. ## TYPICAL APPLICATIONS The palletizer can be evaluated for handling different types of bags, including: * Fertilizer bags * Animal feed bags * Pet food bags * Flour bags * Sugar bags * Seed bags * Chemical product bags * Building material bags * Powder product bags * Granular product bags Compatibility with a specific product, bag size, bag material or palletizing pattern must be technically verified. For further information, photos, videos, technical specifications or to evaluate a possible revamping of the palletizer, please contact us. DUETTI PACKAGING SRL

Condition: used, -M4 Soleo -Manufacture date: 11/2017 -Dimensions (LxWxH): 1730x1526x2480 mm -Usable baking width: 1370 mm -Usable baking depth: 965 mm -Baking surface per deck: 1.32 m² -Number of trays per deck: Lrodpfx Aewxwbpsgrst - 4 of 400 x 600 - 4 of 460 x 660 - 3 of 460 x 760 - 2 of GN 530 x 650 -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg

Condition: used, Year of construction: 1961, Impact energy: 2040 Stroke: 660 mm Strokes per minute: 100/min Throat depth: 750 mm Lodpfxozypd Ne Agrort Distance between lower anvil and ram guide edge: 660 mm Drive power: 75.0 kW Weight: 32 t Hammer weight: 16.5 t Anvil weight: 15.5 t Ram weight: 750 kg

Condition: used, functionality: fully functional, CM Macchine TIN-EVO 300/10 wood impregnation tunnel + RMS 40×800 Lrsdpfx Aezf Iyajgret Four-sided impregnation machine + drying tunnel.

Condition: repair required (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 103-20 ` 104-20, total height: 1,900 mm, total width: 3,400 mm, total length: 4,100 mm, type of input current: three-phase, Equipment: documentation/manual, We are offering for sale two identical apple slicing machines with a shared feed tank and feed line. These machines are suitable for processing various types of fruit, including apples, pears, peaches, nectarines, persimmons, oranges with peel, kiwis, and pineapples. They can be used for cutting into ring slices, segments, and chunks, with or without coring, and are also suitable for producing whole cored fruits such as apples, pears, peaches, nectarines, and more. The machines are therefore perfectly suited for preparing fruit for the drying industry, confectionery and baking industry, fresh fruit salads, the snack industry, or fruit preserves. The design is simple and highly versatile, enabling rapid changeover between ring-slicing, segmenting, chunking (with or without coring, depending on the particular fruit), or coring only, according to your production requirements. The machines also allow quick adjustment of slice thickness, segment number, chunk size, and coring diameter. Constructed entirely of AISI 304 stainless steel, the machines can be integrated inline with other processing equipment. Round fruits can be automatically fed, singulated in the loading area, and transferred onto a stainless steel conveyor equipped with an automatic orienting system, which aligns each fruit inside dedicated tray recesses (the automatic orienting system is suitable for apples, peaches, nectarines, and persimmons without leaves). Other fruit types are manually placed onto the stainless steel conveyor. In the slicing section, the machinery delivers a sharp and precise cut that does not affect organoleptic qualities, ensuring maximum hygiene and product quality. Fruits are processed into rings, segments, or chunks, and/or cored, using interchangeable cutting units that allow variation in slicing dimensions and coring diameter. The sliced products are transferred onto a discharge belt conveyor. Fruit cores are separated below the working area, where a conveying belt (not included in the standard supply) can be installed to carry cores to a collection container. Lrsdpfsx Sx Azox Agrjt All safety guards feature easily removable, quick-release interlocked hinges, allowing safe, rapid maintenance and thorough cleaning.

Year of construction: 2007, operating hours: 11,749 h, condition: used, Empty weight: 9.100 kg Lrodpfx Asz Ep Euegret Serial number: 17006585 Hours: 11749 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Table size: 1,600 × 550 mm Max. table load: approx. 600 kg Distance table–spindle nose: 160–770 mm Rapid traverse: up to 30,000 mm/min Spindle holder: HSK-A63 Spindle speed: 14,000 rpm Spindle cooling: Active Tool magazine: 46 positions Automatic tool changer: Yes Control: Heidenhain Machine weight: approx. 9100 kg Overall dimensions L×W×H: approx. 3000 × 2200 × 3100 mm Equipped with: Fehlman ATS 160 CNC, Blum P87.0634 laser system, Donaldson oil/mist filer DMC MMA, Fehlmann KM-Anlage HD coolant pump, burn engineering FD 2500-F11 cooling unit, Knoll 300 K-1 scraper belt conveyer Online auction of mold making, die manufacturing machine tools (e.g. CNC surface grinding, turning and milling machines FEHLMAN, HEDELIUS, ABA, G+H, SUNNEN, BIGLIA, OKUMA etc.) due to the full plant closure of metal working company location Meusburger Germany GmbH at Viernheim (near Mannheim) in Germany. The online auction opens Thursday 24 September and closes Tuesday 13 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 8 October Pickup day is on: - Monday 19 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.