Used Goodtek Gt-400-Brd-C for sale (66,175)

Condition: good (used), Year of construction: 2021, working width: 400 mm, height adjustment type: electric, Roller application machine Manufacturer: Cosma Type: 400 RC Year of manufacture: 2021 2-roller application machine for applying oil With the Cosma roller application system, oils are applied to, among other things, solid wood floors (parquet), paneling, stairs, garden material, scaffolding wood, and wall decorations. Working width: 400 mm Suitable for workpieces: Thickness: 10 - 50 mm Working height: 900 mm Equipped with: - Dosing roller, 0.37 kW - Rubber-coated application roller, 0.37 kW, 25 Shore Dcedpfey Ic Umsx Ad Njg With electric height adjustment and mechanical height display Control panel for: Feed speed, amperes per roller, and roller height adjustment

Condition: ready for operation (used), Year of construction: 1995, functionality: unexamined, total length: 1,860 mm, total height: 1,500 mm, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 12 kW (16.32 HP), input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Thermal Shrink Tunnel HV 400 - Used machine, built in 1995 - Inspected, tested, and fully operational This high-performance shrink tunnel is designed for energy efficiency. The heating system and adjustable settings are highly variable, allowing for precise shrinking of film-wrapped products with various shapes and contours. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable upper and lower heating. The machine is equipped with an electronic temperature controller and is designed for a maximum internal temperature of up to 250 °C. The conveyor speed is infinitely variable. Technical data Passage width: 400 mm Passage height: 130 mm Hood length: 1,000 mm Conveyor length: 1,860 mm Rod conveyor: Rotating rods with silicone coating, every second rivet fitted Power supply: 380 V three-phase, 50 Hz Heating capacity: Selectable from 2 - 10 kW Connected load: 12 kW Color: Hammertone light grey Additional equipment: Dcedpsy H Dxkefx Ad Njg Temperature control with electronic regulator and contactless relay for precise temperature consistency Pressure rollers at the discharge end

Condition: used, mileage: 7,353 km, power: 330 kW (448.67 HP), first registration: 02/2023, fuel type: electric, maximum load weight: 14,245 kg, overall weight: 27,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, color: black, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: air, loading space volume: 46 m³, loading space length: 7,600 mm, loading space width: 2,450 mm, loading space height: 2,490 mm, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, navigation system, onboard computer, tail-lift, traction control, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is indicated, it is calculated at the current daily exchange rate. The currency valid is that of the vehicle location. Predictive Powertrain Control, front axle with air suspension, front axle 8.0 t, trailing axle, 8 t, steered, unloadable, liftable, cable remote control for air suspension, air suspension, rear axle, axle load monitoring system, tire pressure monitoring system, electronic parking brake, wheelbase 4,900 mm, M cab, M cab, cab width 2.30 m, tinted windscreen with band filter, heated, comfort central locking system, roll stabilization assist, smoke detector in the cab, lower bunk, automatic climate control, driver's air-sprung seat, air conditioning, passenger air-sprung seat, air conditioning, electronic braking system with ABS and ASR, reversing warning system integrated with hazard warning lights, rain sensor, bi-xenon headlights, automatic main/dipped beam and cornering light, fog lights, LED daytime running lights, lane keeping assist, distance control assist, attention assist, traffic sign assist, blind spot assist, cruise control, comfort telephony, wireless charging, navigation system, tail lift: Dautel DL 1500S, 1,500 kg with roll-off protection. Dcodpfsy Nf R Hox Ad Nsg

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details. • Swing over bed: 410 mm Dodpfx Adey If A Ho Nocg • Swing over radial slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material clearance: 65 mm • Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm) • Coolant system: 310 L tank, 3 bar, 40 L/min • Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) • Tool measurement setup • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions Dodpfxjy Ifpts Ad Necg • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 with separate wire feed case Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires, steel [Ø in mm]: 0.6 - 1.6 Weldable wires, stainless steel [Ø in mm]: 0.8 - 1.2 Dcsdey Ia Hmopfx Ad Nsg Weldable wires, aluminium [Ø in mm]: 1 - 1.6 Weldable wires, CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Continuous MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Mains: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulating material class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Dimensions wire feeder case (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: excellent (used), Year of construction: 2013, screw diameter: 22 mm, injection pressure: 2,000 bar, injection weight: 31 g, Arburg 270C 400-70 Golden Edition Clamping force: 40 t Year of manufacture: 2013 Injection weight: 31 g Injection unit: .../70 Screw diameter: 22 mm Specific injection pressure: 2000 bar Injection volume: 34 ccm Injection weight: 31 g Clamping system: 400/... Clamping force: 40 t Platen dimensions: 446 x 446 mm Mould height: 200 mm Opening stroke: 350 mm Max. platen distance: 550 mm Djdpsy I Uzxjfx Ad Njcg Ejector stroke: 125 mm General data: Control system: Selogica Equipment: 2 x pneumatic valves 2 x hydraulic cores Multilift robot 3 hot runner zones Rotameter

Condition: used, mileage: 856,134 km, first registration: 07/2017, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 5,920 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, spoiler, = Additional options and accessories = - Aluminum fuel tank - Roof spoiler - High beam headlights - Radio/CD player Dcsdsuu Dv Aopfx Ad Neg - Side skirts - Sun visor = Further information = Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Tire size: 315/70 R22.5 Brakes: Disc brakes Front axle: Max. axle load: 8,000 kg; Suspension: parabolic springs Rear axle: Twin tires; Max. axle load: 11,500 kg; Reduction: single reduction; Suspension: air suspension Weights Curb weight: 7,323 kg Payload: 13,177 kg GVW: 20,500 kg Financial information Price: On request Identification Registration number: 56-BJS-5 Further information Please contact Maurits Van Giessen for more information.

Condition: good (used), mileage: 996,895 km, power: 294 kW (399.73 HP), first registration: 04/2014, fuel type: diesel, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 700 l, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 5,920 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2014, Equipment: ABS, AdBlue, EBS, air conditioning, cruise control, differential lock, electric window regulation, onboard computer, traction control, = Additional options and equipment = - Aluminium fuel tank - Differential lock - Radio/CD player - Sleeper cab Dodpfx Asy Hcvhjd Njcg = Further information = Transmission: ZF, 12-speed, automatic Number of cylinders: 6 Engine capacity: 10,837 cc Unladen weight: 7,563 kg Payload: 10,437 kg Gross vehicle weight: 18,000 kg Technical condition: good Contact Vitali Lenda for more information.

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Dcjdpfx Ajya Dh Djd Nog Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Condition: good (used), Year of construction: 2010, 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC TECHNICAL DATA Manufacturer: Werth Model: Video-Check-IP 400×200 3D CNC Function: 3D Coordinate Measuring Machine Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 250 mm Max. workpiece weight: 30 kg Drives: Ball screw drives with servo motors Measuring systems: Incremental scales with 0.1 µm resolution Guides: Precision ball guides on all axes Illumination: Transmitted light, bright field and dark field reflected light with LED Optics: Zoom optics with zoom factor 0.2x–100x Camera: High-resolution CCD black-and-white camera Djdpfx Adexfluuo Njcg Electrical connection: 230 V AC, 50 Hz Current consumption: max. 10 A Power: max. 1.5 kVA Noise level: < 70 dB(A) SCOPE OF DELIVERY Including (not limited to): 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC Control panel Probes Fiber optic and reference standard sets Exact scope of delivery according to photo documentation The Werth Video-Check-IP 400×200 3D CNC is a high-precision coordinate measuring machine for optical and tactile metrology. With a measuring range of 400 x 200 x 250 mm, it offers versatile application options for quality assurance of a wide variety of components. The combination of high-resolution CCD black-and-white camera, powerful zoom optics and LED lighting ensures precise image capture and reliable results. Precision ball guides and servo drives guarantee high repeatability. The device comes with extensive accessories and is ideally suited for precise 3D measuring tasks in industrial and manufacturing environments. No guarantee is given for the correctness, completeness or currentness of the information provided.

Year of construction: 2010, condition: excellent (used), Werth Scope Check 400 multi-sensor coordinate measuring machine Year of manufacture: 2010 X-axis: 400 mm Y-axis: 200 mm Z-axis: 200 mm Max. Measuring piece weight: 20 kg Dodpfx Adsnk U E As Nscg Max. Measuring piece height: 200 mm No responsibility is taken for the correctness, completeness and topicality of the information.

Condition: used, mileage: 197,700 km, power: 95 kW (129.16 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 7,250 mm, total width: 2,200 mm, total height: 3,230 mm, loading space length: 4,480 mm, loading space width: 2,130 mm, loading space height: 2,190 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, No. 38 – You can find this and many more inspected Mercedes-Benz vans on our website: Dodpfey Ikywjx Ad Nscg ---- Mercedes-Benz Sprinter 316 CDI MAXI, refrigerated box body with Thermo King V300 Max refrigeration unit, configured for fresh goods transport down to 0°C. Both in-transit and stationary cooling (400 V mains connection) available. The vehicle comes from first ownership and has a complete Mercedes-Benz service history. General inspection/emissions test (TÜV) NEW – valid until 04/2028. Maintenance carried out exclusively at Mercedes-Benz at 55,000 km, 120,000 km, and 180,000 km. Permissible gross weight: 3,500 kg Kerb weight: 3,000 kg Payload: 500 kg Cargo area (LxWxH in cm): 448 x 213 x 219 Emission standard: EURO 6 Long wheelbase: 4,325 mm VIN: WDB9071351N061500 All-season tires 1 key -- * Mercedes-Benz Sprinter 316 CDI MAXI -- * Refrigerated box body for fresh goods -- * Thermo King V300 Max refrigeration unit -- * In-transit and stationary cooling -- * Air conditioning -- * Heated windscreen -- * Reinforced front axle -- * MBUX -- * Navigation system -- * Electric windows -- * Electrically adjustable exterior mirrors -- * Airbag -- * Central locking Changes, errors, and prior sale excepted. Special equipment: - Second battery (auxiliary) in cabin - Extended mounts for exterior mirrors left/right - Suspension: Stabilization Level II - Terminal strip for electrical connections (below driver’s seat) - Diesel fuel filter with water separator - Engine front PTO with bracket for additional refrigeration compressor - MBUX multimedia system (7" touchscreen) - Navigation system for MBUX - Smoker package - Tire pressure monitoring system - Spare wheel (mounted), holder under frame incl. jack - Front mud flaps - Driver’s cabin: comfort driver’s seat - Start/stop engine system - 230 V socket in driver’s cabin - Separation relay for additional battery - Fleece battery 92 Ah - Reinforced front axle - Jack - Heat-insulating glazing (windscreen with upper band filter) Further equipment: - Stowage above windscreen - Stowage below dashboard passenger side - Rear towing eye - Adaptive brake light - Driver airbag - Traction control (ASR) - Washer fluid level indicator - Electrically adjustable and heated exterior mirrors (both) - Outside temperature display - Brake assist - Roof lining in driver’s cab - Automatic headlight activation - Electronic brake force distribution (EBV) - Driver assistance system: Crosswind Assist - Body/chassis: Standard flatbed - Keyless start - Communication module (LTE) for digital services - Fuel tank: main tank 71 liters - Steering column mechanically adjustable - Headlight range adjustment - Truck registration - Side marker lights - Mercedes-Benz emergency call system - Engine 2.1 l – 120 kW CDI CAT - Wheelbase 4,325 mm - Low emissions as per Euro 6 standard - Seat belt system with warning (driver side) - Seat covers/upholstery: fabric - Adjustable passenger seat in cab - ASSYST maintenance interval indicator - Perm. gross weight 3.5 t

Condition: used, mileage: 197,700 km, power: 95 kW (129.16 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 7,250 mm, total width: 2,200 mm, total height: 3,230 mm, loading space length: 4,480 mm, loading space width: 2,130 mm, loading space height: 2,190 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, No. 38 – You can find this and many other inspected Mercedes Benz vans on our homepage: ----Mercedes-Benz Sprinter 316 CDI MAXI, refrigerated box with Thermo King V300 Max refrigeration unit, suitable for fresh goods transport down to 0°C. Both drive and stand-by cooling (400 Volt power connection) available. The vehicle comes from first ownership and has a full service history. HU / AU (Technical Inspection) NEW – valid until 04/2028.----All service carried out exclusively by Mercedes-Benz at 55, 120,000, 180.---- Permissible total weight: 3,500 kg Kerb weight: 3 kg Payload: 500 kg Load area (LxWxH): 448 x 213 x 219 cm Emissions class: EURO 6 Long wheelbase: 4,325 mm VIN: WDB9071351N061500 All-season tyres 1 key ----* Mercedes-Benz Sprinter 316 CDI MAXI * Fresh goods refrigerated box * Thermo King V300 Max refrigeration unit * Drive and stand-by cooling * Air conditioning * Heated windscreen * Reinforced front axle * MBUX multimedia system * Navigation system * Electric windows * Electrically adjustable exterior mirrors * Airbag * Central locking ----Subject to error, amendments and prior sale. Dcsdey Ikyqspfx Ad Nsg Special features: Second battery (auxiliary battery) in cabin, extended mirror mounts left/right, Suspension: Stabilization level II, Terminal strip for electrical connections (beneath driver's seat), Fuel filter with water separator, Front engine PTO with bracket for additional refrigeration compressor, MBUX multimedia system (7" touchscreen), navigation for MBUX, smoker's package, tire pressure monitoring system, spare wheel with matching tire, spare wheel holder under rear frame incl. jack, front mud flaps, driver’s cab seating: comfort driver's seat, engine start/stop system, 230V socket in cab, separator relay for additional battery, 92 Ah AGM battery, reinforced front axle, jack, heat-insulating glazing (windscreen with upper band filter) Further equipment: Storage compartment above windscreen, compartment below dashboard on passenger side, rear towing eye, adaptive brake light, driver's airbag, traction control (ASR), washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), outside temperature display, brake assist, roof trim in driver's cab, automatic headlight activation, electronic brake force distribution (EBV), driving assistance: crosswind assist, body/chassis: standard flatbed, Keyless-Start, communication module (LTE) for digital services, main fuel tank: 71 liters, steering wheel (mechanically adjustable steering column), headlight range adjustment, truck classification, lateral marker lights, Mercedes-Benz emergency call system, engine 2.1L - 120 kW CDI CAT, wheelbase 4,325 mm, Euro 6 low emission standard, driver's seatbelt system with warning, upholstery: fabric, driver’s cab seating: adjustable passenger seat, service interval indicator Assyst, perm. gross vehicle weight 3.5 t

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm Dcodpfx Ajx Nr Ryod Nog • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") Dodjw Intajpfx Ad Njcg --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, Year of construction: 2017, machine/vehicle number: D 941 479, overall weight: 16 kg, input frequency: 50 Hz, The Atlas Copco Power Focus PF4000-C-HW is the ideal solution for precise and efficient bolted joints in industry. We offer this used control unit together with the matching STV-ST61-30-40 bolted joint. Technical specifications: Control unit model: Power Focus PF4000-C-HW, year of manufacture: 2017 Screwdriver model: STV-ST61-30-40, year of manufacture: 2017 Power supply: 200-240 V/ (50-60 Hz) Power consumption (W): 320 W Maximum operating temperature: +40.0° C Dcjdjulayxspfx Ad Nog Minimum operating temperature: +5.0° C Frequency: 50-60 Hz For further details, see the type plates on the control unit and screwdriver in the corresponding pictures.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 145 mm, cutting range round steel at 45°: 120 mm, type of input current: AC, Robust cold circular saw with pneumatic workpiece clamping Clamping, sawing, return to initial position, opening in automatic mode Stepless feed rate adjustment Minimum quantity lubrication system + coolant unit Saw blade diameter from 375 to 425 mm Mitre adjustment 45° - 90° - -45° - -30° Cutting capacity with saw blade diameter 400 mm: Dodpfx Asy Httdod Nscg Flat: 210 x 120 mm Mitre cut: 145 x 120 mm Round: 140 mm diameter Mitre cut: 120 mm Pole-changing three-phase motor for saw blade – circumferential speed 22 + 44 m/min Voltage: 400 V

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires steel [Ø mm]: 0.6 - 1.6 Weldable wires stainless steel [Ø mm]: 0.8 - 1.2 Weldable wires aluminium [Ø mm]: 1 - 1.6 Weldable wires CuSi [Ø mm]: 0.8 - 1.2 Voltage adjustment: stepless MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø mm]: 1.5 - 8 Electrode duty cycle Dodpfx Aey Hfwnod Necg Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 General specifications Open-circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Power supply: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Mains fuse 3~ (50/60 Hz) [A]: 32 Max. positive mains tolerance 3~ (50/60 Hz) [%]: 15 Max. negative mains tolerance 3~ (50/60 Hz) [%]: 15 Power plug: CEE 32 Standards and certifications Protection class: IP32S Insulation class: F Standard: EN 60974-01 Markings/Certifications: CE, S Cooling type: Gas-cooled, water-cooled Cooling Standard cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Case dimensions (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 235 mm, spindle bore: 52 mm, turning diameter: 400 mm, center height: 200 mm, turning length: 1,000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with stepless speed control from the PREMIUM CU series feature a wide range of features and accessories for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed to suit material and turning diameter – especially advantageous for non-ferrous metals, plastics, and for achieving perfect surface finishes on precision parts and fits. A notable highlight is the integrated R/L control units mounted on the tool slides, enabling simple switching between clockwise and counterclockwise spindle rotation. These replace the conventional shift rods typically found on universal lathes. The machine is equipped with electromechanical spindle brakes for extremely fast spindle stops, ensuring efficient handling. The leadscrews are fitted with overload protection. Performance Data and Specifications: Center distance: 1000 mm Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 235 mm Swing without bridge: 550 mm Bed width: 320 mm Cross slide travel: 235 mm Top slide travel: 110 mm Maximum turning tool cross-section: 25x25 mm Chuck mounting: DIN 55027 No. 6 Dcsdpsy Hlxfjfx Ad Njg Spindle (main spindle) taper: MK 6 mm Spindle bore: 52 mm Speed Range 1, stepless: 18 – 98 rpm Speed Range 2, stepless: 48 – 265 rpm Speed Range 3, stepless: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric thread pitch (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill stroke: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Total length: 2350 mm Total height: 1330 mm Weight: 1590 kg Standard Equipment: - RÖHM 3-jaw chuck - 5-piece quick-change toolholder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Machine base / chip tray / splash wall - Tool set / operating manual / CE PREMIUM CU Series Standards: - Heavy-duty grey cast iron machine bed, excellent vibration damping - Removable bridge - Prismatic guideways - Hardened and precision-ground main spindle, high concentricity, adjustable precision bearings - Smooth-running main spindle and feed gearbox in oil bath - Gears made of case-hardened chromium-nickel steel, hardened and precision ground - Feed reverse function - Covered trapezoidal thread leadscrew, hardened, precision ground - Tool slide with locking nut - Precisely adjustable slideways - Solid tailstock with offset - Machining accuracy according to DIN standards Including 3-axis digital position display This machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Condition: as good as new (ex-display), Year of construction: 2026, Carriage length: 3200 mm Cutting width at rip fence: 1350 mm Dcjdogfm Efspfx Ad Neg Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Dcjdpfx Asvvi N Isd Njg

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 10900 € 209.28 € Dedpfjwv H Awjx Ad Njcg 1250 kg 1300 mm 450 - 550 mm 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8200 € 158.26 € Dedpfx Aewirp Asd Necg 1250 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, For sale: EWM Tetrix XQ 400 Puls AC/DC W Expert welding machine including accessories (TIG Speed continuous drive 45 coldwire wire feeder/ABITIG 500W MT 4m torch/others). The system was purchased as an add-on for a BOKI linear welding automaton, intended for longitudinal welding of aluminium tubes/sheets. Welding was successful; however, the project was ultimately not realized. The equipment has run for approx. 20 hours = like new condition. Original price: CZK 354,800. Dcodpfoy Hpamjx Ad Njg